Oracle 10g standard edition installation and problems with logon (help pls)

I installed 10g standard edition, however I got the following two messages during installation:
1) The host IP address can not be determined
2) Missing or Invalid password ...
Eventhough I unlocked all the passwords during install (tiger/scott, sys, system, etc) I can not logon now with none of them ("invalid username/password: logon denied"). I also get "ORA-12170: TNS: Connect Timeout Occured" when trying to lgoon with my email addr and password used for installation.
Please help, this is frustrating. Thx!
P.S> Do I need to input anything in the "Host String" box ?

Chances are
1) you are using WIndows of some sort;
2) your machine does not have a static IP address (you are using DHCP);
3) you have not installed the loopback adapter, as desrcibed in the installation document.
You may want to review the Oracle Database 10g (release whichever you are using) "Installation Guide" manual for your operating system again. I think you missed a step.

Similar Messages

Forms 6i C/S with Oracle 10g Standard Edition

¿Somebody had installed Developer 6i C/S with Oracle 10g Standard Edition on Windows 2000, Windows 2003, Windows XP Professional?
¿What about the results?

I believe this particular combination (6i Forms with 10g database) is not actually supported, so is perhaps best avoided.
My own experience is that these forms run ok against a 10g database if compiled against a non-10g database, but if you try and compile the 6i form while connected to a 10g db, the results are unpredictable - forms which compile perfectly well against 9i fail against 10g, with all sorts of horrible looking internal error codes.
regards
Andrew
UK

Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

Hi
I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
Ramanbir S

You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

What is limit of database size in oracle 10g standard edition/edition one

Hai All,
What is the limit of database size in oracle 10g standard edition and standard edition one.. I see the white paper of oracle says that the limitation is 500 GB. This limitation is correct.? if correct then what happened after the limit..?
Please help?
Shiju

What white paper would that be? I can't see any limit in the Oracle Database 10g Editions comparisons.
C.

Oracle Streaming Queues in Oracle 10G standard Edition

I would like to configure and implement Oracle Streaming Queues in Oracle 10G standard Edition. If it is possible then please guide me and give me some clues and if not then please advise me some alternate method.

Here is the guidance you requested.
License information:
http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/toc.htm
Technical information:
http://tahiti.oracle.com/
Since I don't even know what version you have ... this is as far as I can take you.

Oracle 10g Express Edition installation problem in windowsXP

while installing the Oracle 10g Express Edition in windows XP ,
it is showing an error like this ,
the cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error.
If anybody knows solution to this problem plz mail me to this email id
[email protected]

I think you should probably download the file again, it might be corrupt.
~Jer

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

Oracle 10g Express Edition Installation Error

I have downloaded 10g Express Edition and am trying to install. After clicking on the OracleXE.exe file, I get the following error:
Error applying transforms. Verify that the specified transform paths are valid. C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
I have verified that the path and file exists. What else should I do?

Here is the Ipconfig settings:
ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jfunk
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
Ethernet adapter Local Area Connection 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.100.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection 5:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet
Controller (3C905C-TX Compatible) #4
Physical Address. . . . . . . . . : 00-08-74-48-AE-AB
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 200.105.128.40
200.105.128.41
C:\Documents and Settings\funk>
No luck in changing the Temp environment setting. Here is the latest log.
=== Verbose logging started: 8/22/2007 16:55:24 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:\PROGRA~1\COMMON~1\INSTAL~1\Driver\11\INTEL3~1\IDriver.exe ===
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'c:\temp\_is5F\Oracle Database 10g Express Edition.msi' against software restriction policy
MSI (c) (10:B8) [16:55:24:765]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is not digitally signed
MSI (c) (10:B8) [16:55:24:765]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\Oracle Database 10g Express Edition.msi is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:775]: Cloaking enabled.
MSI (c) (10:B8) [16:55:24:775]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (10:B8) [16:55:24:775]: End dialog not enabled
MSI (c) (10:B8) [16:55:24:775]: Original package ==>
MSI (c) (10:B8) [16:55:24:775]: Package we're running from ==> c:\temp\_is5F\Oracle Database 10g Express Edition.msi
MSI (c) (10:B8) [16:55:24:775]: Transforming table Property.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: looking for appcompat database entry with ProductCode '{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}'.
MSI (c) (10:B8) [16:55:24:775]: APPCOMPAT: no matching ProductCode found in database.
MSI (c) (10:B8) [16:55:24:775]: MSCOREE not loaded loading copy from system32
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source.
MSI (c) (10:B8) [16:55:24:785]: Resolving source to launched-from source.
MSI (c) (10:B8) [16:55:24:785]: Setting launched-from source as last-used.
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR ==> c:\temp\_is5F\
MSI (c) (10:B8) [16:55:24:785]: SOURCEDIR product ==> {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST
MSI (c) (10:B8) [16:55:24:785]: Unable to create a temp copy of transform 'C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST'.
MSI (c) (10:B8) [16:55:24:785]: Note: 1: 2203 2: C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST 3: -2147287037
MSI (c) (10:B8) [16:55:24:785]: Couldn't find cached transform C:\WINDOWS\Installer\{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}\1033.MST. Looking for it at the source.
MSI (c) (10:B8) [16:55:24:785]: Looking for file transform: c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Original transform ==> c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:795]: Transform we're running from ==> C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:795]: Found missing cached transform c:\temp\_is5F\1033.MST. Adding it to re-cache list.
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: Verifying transform --> 'c:\temp\_is5F\1033.MST' against software restriction policy
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: DigitalSignature 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is not digitally signed
MSI (c) (10:B8) [16:55:24:795]: SOFTWARE RESTRICTION POLICY: c:\temp\_is5F\1033.MST is permitted to run at the 'unrestricted' authorization level.
MSI (c) (10:B8) [16:55:24:795]: Validating transform 'C:\temp\5d536d5.mst' with validation bits 0
MSI (c) (10:B8) [16:55:24:795]: Transform 'C:\temp\5d536d5.mst' is valid.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Media 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: PatchPackage 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: 'PatchPackage' table is missing or empty. No pre-transform fixup necessary.
MSI (c) (10:B8) [16:55:24:795]: TRANSFORM: Applying regular transform to database.
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Tables 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: _Columns 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: ActionText 3: -2147287038
MSI (c) (10:B8) [16:55:24:795]: Note: 1: 2262 2: AdminExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdminUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtExecuteSequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AdvtUISequence 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppId 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2262 2: AppSearch 3: -2147287038
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
DEBUG: Error 2251: Database: c:\temp\_is5F\Oracle Database 10g Express Edition.msi Transform: Cannot delete row that doesn't exist. Table: Property
1: 2251 2: c:\temp\_is5F\Oracle Database 10g Express Edition.msi 3: Property
Error applying transforms. Verify that the specified transform paths are valid.
c:\temp\_is5F\1033.MST
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 1708
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Note: 1: 2729
MSI (c) (10:B8) [16:55:24:805]: Product: Oracle Database 10g Express Edition -- Installation failed.
MSI (c) (10:B8) [16:55:24:805]: Attempting to delete file C:\temp\5d536d5.mst
MSI (c) (10:B8) [16:55:24:805]: Unable to delete the file. LastError = 32
=== Verbose logging stopped: 8/22/2007 16:55:24 ===
I am on my last attempt here if there are no other concrete solutions. Guess I will have to wait for 11g to make it to the Windows environment. Any other previous version of 10g that I can try????

Oracle 10g express edition installation file corrupt?

Hi
I have now tried at least 5 times. I downloaded the beta Windows version of Oracle 10g express edition. The download is successful each time but every time I try to run the installer, it says "Error in installation file". Anybody else facing this problem?

Hi,
Have you checked for any errors in log file....????
Can you connect via SQL*PLUS ... , for example...????
Regards,
Simon

Can i work with oracle 10g express edition by connecting it with visuval studio 2010?

i have oracle 10g-express edition,and visuval studio 2010, can i have a connectivity between these two?or it requires any additional installations,or any special procedures for installing it? HELP ME..

You might want to post this in the Oracle 10g XE support forum, where you might get a better response. The is is the support form for Oracle App Express..
Thank you,
Tony Miller
Monroe, WA

What replication methods are available in Oracle 10g Standard Edition?

Hi All,
Our customer wants to have two identical servers at two different sites (Virginia and Utah). Server in Virginia will be the primary and the other one will be Standby. Application will run on the primary database and they would like to be able to use the Utah server (standby) in the event of a failure. The switch over can be manual or automated and does not have to be instantaneous.
I know these things can be in Enterprise Edition, but the cost is an issue here, so I was wondering what other methods are available to achieve this goal with Standard Edition database running on Windows Server 2008?
Thank you,
Sinan

Spajdy,
According to the Data Guard documentation:
Getting Started with Data Guard
"Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle Database Standard Edition."
Unfortunately, the cost is a concern. I would love to be able to use just the Enterprise Edition and Golden Gate or Data Guard, but it is not possible, so my manager says I have to do what I have to do with the Standard Edition.
Thanks,
Sinan

Limitations of Oracle 10G XE as against Oracle 10G Standard Edition

Can you please give the information regarding....
1. Capabilities of Oracle 10G XE (Express Edition)
2. Limitations of Oracle 10G XE as against Oracle 10G Standard Edition

Have a look at the License Information:
http://download-uk.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJBGGA
There's also a feature matrix in pdf-format:
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
C.
Message was edited by:
cd

Problem with oracle 10g express edition installation on linux(opensuse)

This is the error it give's me when i install the software. The error come after i set http port and the acces port to database
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora: No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora: No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/tnsnames.ora': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/postDBCreation.sql: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/postDBCreation.sql': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/DatabaseHomePage.sh: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/DatabaseHomePage.sh': No such file or directory
sed: can't read /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/readonlinehelp.sh: No such file or directory
/bin/chown: cannot access `/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/readonlinehelp.sh': No such file or directory
Configuring Database...grep: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/*.log: No such file or directory
Done
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
Starting Oracle Database 10g Express Edition Instance...Done
Installation Completed Successfully.
To access the Database Home Page go to "http://127.0.0.1:8081/apex"
The files exists to the path who is looking for them and tell me they don't exist
can you help me please with this problem?
Thanks
Message was edited by:
user652409

hi,
i've reinstalled the database and now it give's me just the last 3 error messages,and i don't now what to do :
Configuring Database...grep: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/*.log: No such file or directory
Done
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
this files or directories doesn't exists...
Please help
Teero

Oracle 10g Express Edition, Installation Problem

After run
# /etc/init.d/oracle-xe configure
Oracle Database 10g Express Edition Configuration-------------------------------------------------This will configure on-boot properties of Oracle Database 10g ExpressEdition. The following questions will determine whether the database shouldbe starting upon system boot, the ports it will use, and the passwords thatwill be used for database accounts. Press <Enter> to accept the defaults.Ctrl-C will abort.
Specify the HTTP port that will be used for HTML DB [8080]:8080
Specify a port that will be used for the database listener [1521]:1521
Specify a password to be used for database accounts. Note that the samepassword will be used for SYS, SYSTEM and FLOWS_020100. Oracle recommendsthe use of different passwords for each database account. This can be doneafter initial configuration:Confirm the password:
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:y
Configuring Database...Starting Oracle Net Listener.Starting Oracle Net Listener.Starting Oracle Database 10g Express Edition Instance.
//error msg gos here
Failed to start Oracle
Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
in the orcale-xe service, some message shows:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
OS: Linux RH9
is that glibc version's problem? mine is glibc_2.3.2
how to make it?
thank u .

Hello,
I have the same problem on RH9.
[root@phpsrv init.d]# ./oracle-xe start
Starting Oracle Net Listener.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Starting Oracle Database 10g Express Edition Instance.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
Regards,
Pavel Kucera

Apex 3.1.2 installation on Oracle 10g Standard Edition (10gSE)

Hi..We're trying to install apex 3.1.2 on 10gSE (No application server 10gAS is available but just the database).
Can it be installed with the embedded plsql gateway (EPG) option?
or
Oracle HTTP Server mod_plsql option?
Currently there's Apache webserver already running on the box with PHP applications running. Want to make sure that apex/http-server install will not corrupt the existing environment.
Please provide any pointers/references. IF YOU CAN OFFER PHONE SUPPORT FOR 1-2 HOURS, YOUR TIME IS Sincerely APPRECIATED. PLEASE EMAIL: [email protected] For Direct contact. Also, I may need help to solve some apex screen issues.
* Removing the tagging with $ compensation on the post..Apex Community as in the past has been extremely helpful in solving many great apex challenges. Thanks for the continued support. *
Edited by: Shravanv on Feb 18, 2010 12:09 PM
Edited by: Shravanv on Feb 18, 2010 4:11 PM

1- Here is what I mean, the oracle website is showing Web Logic in the download page of oracle application server:
http://www.oracle.com/technology/software/products/ias/index.html
Is there a separate download link for Oracle Application Server, if it's different from the web logic server?
2- I Installed HTML_DB which is found in the Oracle 10g companion CD, I think I installed the HTTP Server with it, but now I want to install APEX 3.1.2 which I downloaded separately, if I uninstalled the HTML_DB using Oracle Universal Installer, will it remove the HTTP Server as well? since it lists the HTML_DB only as being installed without listing the HTTP Server separetly.
Thanks.

Oracle 10g standard edition installation and problems with logon (help pls)

Similar Messages

Maybe you are looking for