Oracle 10g Standard One

I want to clear out some issue abt Oracle 10g Standard One and Partitioning. On the internet I have found that one of the Oracle Enterprise Edition Features not available in Oracle Standard Edition One is:
Oracle partitioning - For database over 100 gigabytes
Can someone confirm this? Does it actually mean that there is actually PARTITIONING in Oracle10g Standard One if the database is less than 100GB ?
thanks

I don't believe partitioning is available in the standard edition (or in Standard Edition One). The comment you refer to is likely explaining the sort of databases that might benefit from partitioning-- there aren't a lot of folks that would want to partition database tables if the database was only a few GB in size.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

What is limit of database size in oracle 10g standard edition/edition one

Hai All,
What is the limit of database size in oracle 10g standard edition and standard edition one.. I see the white paper of oracle says that the limitation is 500 GB. This limitation is correct.? if correct then what happened after the limit..?
Please help?
Shiju

What white paper would that be? I can't see any limit in the Oracle Database 10g Editions comparisons.
C.

Access oracle 10g standard edn one server from oracle 10g exp edn clnt

Hi,
I have installed Oracle 10g standard edition one server. I am trying to access the database through oracle 10g express client. i am not able to configure the connection string. is it possible to connect from express edition client to standard edition database server.
thanks
ajith

is it possible to connect from express edition client to standard edition database server.Yes, of course.
i am not able to configure the connection string.You don't need any. Try
sqlplus username/password@<server name or IP address>/<service name>example :
C:\>sqlplus test/[email protected]/db102
SQL*Plus: Release 10.2.0.1.0 - Production on Lun Lug 27 14:05:25 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connesso a:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>

Standby Database in 10g Standard One

Hello Everyone,
I need to do a standby database using Oracle Database 10g Standard One.
Do you know how can I do it, step by step??
Thanks

Standby or so called dataguard after 9i is not availible in standard edition nor standard one.

Oracle DB Standard One

Hello,
Need information on the Oracle DB Standard One installation.
I have installed Oracle 10g r2 Standard verion on HP unix IA OS.
Our customer has licence for Standard One.
Please help me to clear my doubt, is Standard Edition installation is ok for
Standard One ?
Best Regards,
Deep

(See caveat at end)
There is no difference between the Standard and Standard One install. Indeed, the Standard One does not appear on the install menu.
Standard One is more of a license issue - the way I like to understand it: it is Standard with the restriction that you will not use the RAC part, and you will llimit it to 2 CPU. Read other limitations in the Licensing doc at http://tahiti.oracle.com
As always, with licensing, the only real source of information is Oracle itself. Contact your favorite Oracle Sales team for a document describing the rules and limitations. Remember that in a legal situation, a judge would not be happy with an answer "I read it on the internet" or "I heard it happened to a friend of a friend of mine"

Limitations of Oracle 10G XE as against Oracle 10G Standard Edition

Can you please give the information regarding....
1. Capabilities of Oracle 10G XE (Express Edition)
2. Limitations of Oracle 10G XE as against Oracle 10G Standard Edition

Have a look at the License Information:
http://download-uk.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJBGGA
There's also a feature matrix in pdf-format:
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
C.
Message was edited by:
cd

Oracle Streaming Queues in Oracle 10G standard Edition

I would like to configure and implement Oracle Streaming Queues in Oracle 10G standard Edition. If it is possible then please guide me and give me some clues and if not then please advise me some alternate method.

Here is the guidance you requested.
License information:
http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/toc.htm
Technical information:
http://tahiti.oracle.com/
Since I don't even know what version you have ... this is as far as I can take you.

Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

Hi
I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
Ramanbir S

You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

Need information related to oracle 10g standard / enterprise edition (diff)

Hi,
I had developed my application using oracle 10g enterprise edition and now i wanna to shift the entire thing to oracle 10g standard edition.
i Ha ve query on thiis point.
1) Is it safe to do so.
2) what are the difference between both the edition.
3) what are the restriction i can face if i am moving form 10g enterprise to 10g standard.
4) what are the steps i have to do to do the same.
5) risk,efficency,restriction and all the major difference.
If you can suggest me something, then it will be very helpful for me.
Thanks,
Anit
Edited by: Anit A. on Sep 5, 2008 12:24 AM

Hi Anit,
Is it safe to do so.ALWAYS check with your CSR for licensing deals, things change constantlt.
what are the difference between both the edition.EE has all the goodies! Here is my list of differences in SE and EE: http://www.dba-oracle.com/art_so_oracle_standard_enterprise_edition.htm
what are the restriction i can face if i am moving form 10g enterprise to 10g standard.No replication, no Data Guard, no stored outlines, no MV's . . . .
what are the steps i have to do to do the same.Just install SE, point your $ORACLE_HOME to it and bounce
Hope this answers your question . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference":
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm

Planning to purchase Oracle 11g Standard One Edition

I am planning to purchase Oracle 11g Standard One Edition at the same time I have some following questions.
Plat form
     Server with
Dual CPU Inter Core 2 Quada
          4 GB RAM
          500 GB HDD
          Windows 2003
          2 MBPS Broadband
     40 Clients
*18 Locations*
Inter Core 2 Due
2 GB RAM
2 MBPS Broadband
All clients should be connected to server over the internet with VB 6.0 and VB.Net 2005 both the applications.
This is possible?

I am planning to purchase Oracle 11g Standard One Edition at the same time I have some following questions.
Plat form
     Server with
Dual CPU Inter Core 2 Quada
          4 GB RAM
          500 GB HDD
          Windows 2003
          2 MBPS Broadband
     40 Clients
*18 Locations*
Inter Core 2 Due
2 GB RAM
2 MBPS Broadband
All clients should be connected to server over the internet with VB 6.0 and VB.Net 2005 both the applications.
This is possible?

Oracle Database Standard One

Hi,
I know HTMLDB is included in Oracle Database Standard Edition and Enterprise Edition. I would like to know if the same applies for Oracle Database Standard One?
Thanks.
Best Regards,
Patrick

Patrick,
HTML DB is supported in Standard One, Standard and Enterprise Editions of the Oracle Database.
Thanks,
- Scott -

Forms 6i C/S with Oracle 10g Standard Edition

¿Somebody had installed Developer 6i C/S with Oracle 10g Standard Edition on Windows 2000, Windows 2003, Windows XP Professional?
¿What about the results?

I believe this particular combination (6i Forms with 10g database) is not actually supported, so is perhaps best avoided.
My own experience is that these forms run ok against a 10g database if compiled against a non-10g database, but if you try and compile the 6i form while connected to a 10g db, the results are unpredictable - forms which compile perfectly well against 9i fail against 10g, with all sorts of horrible looking internal error codes.
regards
Andrew
UK

Oracle Licensing Question on Processors - Oracle 10g Standard Edtion One

We are a small finance company and wanted to buy Oracle database 10g Standard Edition One licenses.
We wanted to get a 15 users licenses(perpetual licenses)
Now when it comes to the server hardware where we will be installing the Oracle database, do we need
to make sure we have only 1 (or) 2 processors ?
Is there document which will tell me as what kind of processors or any limitations on the processors speed
I need to have on the Oracle database server ?

Hi,
did you have a look at:
https://shop.oracle.com/pls/ostore/wwv_flow_item_help.show_help?p_item_id=4777527003091012
? As far as I can see licensing 15 users on a 1-2 socket server should not be an issue. If you would have a bit more users you could consider a socket license (5800.- US$ / socket).
With Standard Edition One or with named users licensing you do not have to worry about the technical figures of your CPU. This is only needed when you license Enterprise Edition (EE) based on processor metric because then cores and processor type are used to calculate the amount of processor licenses.
Hope this helps.
Regards,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/otn.php
Edited by: David D'Acquisto on 28.05.2010 23:16

Creating a connection pool using Oracle 10g, Sun ONE Application Serve 8.1

Has any one succesfully configured Oracle 10g to work with Sun ONE Application Server 8.1 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.

I haven't done it myself on that particular service pack, but I don't see why it should be any different than configuring a connection pool on other vanilla win2k/other OSes.
Would you please try and let this forum know?
thanks.

Oracle 10g standard edition installation and problems with logon (help pls)

I installed 10g standard edition, however I got the following two messages during installation:
1) The host IP address can not be determined
2) Missing or Invalid password ...
Eventhough I unlocked all the passwords during install (tiger/scott, sys, system, etc) I can not logon now with none of them ("invalid username/password: logon denied"). I also get "ORA-12170: TNS: Connect Timeout Occured" when trying to lgoon with my email addr and password used for installation.
Please help, this is frustrating. Thx!
P.S> Do I need to input anything in the "Host String" box ?

Chances are
1) you are using WIndows of some sort;
2) your machine does not have a static IP address (you are using DHCP);
3) you have not installed the loopback adapter, as desrcibed in the installation document.
You may want to review the Oracle Database 10g (release whichever you are using) "Installation Guide" manual for your operating system again. I think you missed a step.

Oracle 10g Standard One

Similar Messages

Maybe you are looking for