Oracle 10g Universal Installer not running in HP-UX itanium
<span class="MsgBodyText">I am installing Oracle 10.2 to HP-UX itanium 11i (11.23).
I followed all the necessary steps mentioned in oracle installation guide.
I update kernel parameter, oracle home directory creation, permission, oracle user and dba,oinstall group creation.
But when i run the runinstaller i got some error so that i cant go forward to database installation. here are the errors
<span class="MsgBodyText">bash-3.2$ uname -a
HP-UX incbk B.11.23 U ia64 0831792644 unlimited-user license
bash-3.2$ /test_archive/10g_HP-UX/database/runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.23
Passed
Checking swap space: must be greater than 250 MB. Actual 4095 MB Passed
Checking Temp space: must be greater than 250 MB. Actual 1955 MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from
/tmp/OraInstall2009-02-10_10-42-00AM. Please wait ...bash-3.2$
Unhandled signal occurred at 0x60000000c8366780
SIGSEGV 11* segmentation violation
si_signo [11]: SIGSEGV 11* segmentation violation
si_errno [0]: Error 0
si_code [2]: SEGV_ACCERR [addr: 0x0]
Aborting...
Another exception has been detected while we were handling last error.
Dumping information about last error:
ERROR REPORT FILE = (N/A)
PC = c8366780
SIGNAL = 11
FUNCTION NAME = (N/A)
OFFSET = 0xFFFFFFFF
LIBRARY NAME = (N/A)
Please check ERROR REPORT FILE for further information, if there is any.
Good bye.
<span class="MsgBodyText">Please help me...
Is the problem in OS level or any patch problem??
I have no idea. Please give some idea.
Shafiul
Novotel-bd
hi,
Please check metalink note 169706.1 fro OS requirements
Similar Messages
-
Mandrake Linux 8.0 - can't get Oracle Universal Installer to run
Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
Mem: 525901824 116862976 409038848 0 6377472
61140992
Swap: 1069244416 0 1069244416
MemTotal: 513576 kB
MemFree: 399452 kB
MemShared: 0 kB
Buffers: 6228 kB
Cached: 59708 kB
Active: 63740 kB
Inact_dirty: 2196 kB
Inact_clean: 0 kB
Inact_target: 1072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 513576 kB
LowFree: 399452 kB
SwapTotal: 1044184 kB
SwapFree: 1044184 kB
User Limits (in bytes except for NOFILE and NPROC) -
RLIMIT_FSIZE : infinity
RLIMIT_DATA : infinity
RLIMIT_STACK : 2093056
RLIMIT_CORE : 0
RLIMIT_NOFILE : 1024
RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck! -
Getting error while running Oracle universal installer to run the deinstall
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this? -
Oracle 10g R2 installation on sun solaris 10 Sparc machine
Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran KanniahIt is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz -
Universal Installer not working
Hi All,
On my windows vista laptop I was having oracle 10g enterprise edition 10.2.3 it was working fine.Then I uninstalled using universal installer and try to install oracle 11g on the same laptop but some how it was not installed. now I am trying to install same oracle 10g enterprise edition 10.2.3 using universal installer nothing is happen.
when I was trying to reinstall oracle 10g it was not installing properly so I restore my windows system 2 days back where oracle 10g was working fine. But after restore windows I look in to oracle home I saw only folders call (1)Application Development and its sub applications (2)configuration and migration tool and its sub applications (3)Integrated management tool and its sub applications (4)Oracle installation products and its sub applications I can't see any database. now I can't create new database or uninstall oracle using universal installer. can you plz tel me what do I do next to ger my oracle 10g back on my laptop.
when I launch universal installer
just windows show me a message
"unidentified program is trying to access your computer
setup.exe
Cancle
Allow"user5416657 wrote:
Hi Srini,
Now I know that oracle 11g is not supported on windows vista home premium, now Help me to install oracle 10gNot just 11g .... NO Oracle product is support on ANY "home" edition of ANY version of Windows. -
Oracle 10g client installation on OpenVMS 8.3 Itanium
I am trying to perform the installation of Oracle 10g client installation on OpenVMS 8.3 Itanium. I am getting the OUI (Oracle Universal Installer) window up and as soon as I click the "next" button it errors. The error is:
SEVERE: OUI-10207:There is not enough disk space on the OUI swap area /dsa50/temp/OraInstall2007-06-05_06-19-23PM. Please make at le
ast 9MB of space available and retry.
The disk for the oracle installation temp location and home location are in different directories on the same ODS-5 formated disk. The disk has approximately 251711296 free blocks.
The trace.log located in the <oracle_home> area shows the following:
in ssGetVolumeFreeSpace
in ssGetVolumeFreeSpace:before getFreeSpace:DSA50
Vol name is DSA50
Disk name is [.DSA50]
Disk=, Free blocks = 3362
in ssGetVolumeFreeSpace:after getFreeSpace:3362
returning from ssGetVolumeFreeSpace
The "temp" disk is DSA50.
Has anyone seen this issue with installation of the client on a large disk?
Are there any suggestions on what to do to correct this issue?SEVERE: OUI-10207:There is not enough disk space. This error may be present at the Open VMS Itanium platform at it is due to bug 5981203 "OUI CALCULATES AVAILABLE DISK SPACE WRONG" and bug 5580279 "OUI FAILS WITH OUI-10207 ERROR". It is fixed in 10.2.0.3.0
As a workaround, use a logical diskname or the volume name and not the physical device name
~ Madrid -
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm -
Oracle 10g database homepage not working?
Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyI had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck -
Oracle 10g database installation in red hat 5
what are the packages needed for oracle 10g database installation in red hat 5?
what do you mean by yum way of installation?Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/ -
Oracle 10g Universe Connectivity From 64bit Windows 2003 Server
Hi,
Have an existing BO XI 3.1 environment built on a 64 bit Windows 2003 server and
I'm having problems getting it to communicate with Oracle 10g universes. Works fine
with its SQL Server 2005 repository and SQL Server 2005 relational/olap universes, but
cant seem to get it to work with Oracle.
Universes work fine on the 32 bit development environment talking to the same Oracle
database, but when move them to 64 bit testing environment they all fail with
Oracle ora-12154 errors.
32 bit Oracle client is installed and can communicate fine with other products using ODBC
connections from the server - but BO refuses to communicate.
Any ideas other than reinstalling BO under 'Program Files' rather than 'Program Files (x86)'
as I've seen some references on the web about this possibly being a problem?
Thanks.Hi,
Oracle 32 bit and 64 bit connectivity work fine from the server. The problem seems to
relate to bug 3807408 in Oracle 10g that cant handle parentheses in directory names.
So BO being installed in u2018C:\Program Files (x86)\Business Objectsu2019 causes it to get
rather annoyed.
SAP Note 1202730 does cover this, but our DBA's aren't too keen on installing the
suggested patch. I'm also not very keen on reinstalling BO in a different directory as
we've got working production sites that would have to be rebuilt.
So now investigating whether using the Oracle 11g client will resolve this.
MSDN forum topic http://social.msdn.microsoft.com/forums/en-US/sqlintegrationservices/thread/ab662d63-6385-4f73-b27f-d526048f601f/ gives a pretty good overview of what people have been trying to resolve this. -
Where can I download the Oracle 10g Database Installer
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.
981705 wrote:
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.As mentioned above, you need to log a SR since 10g is not longer available for download -- https://forums.oracle.com/forums/search.jspa?threadID=&q=10g+AND+Download&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
IAS_101330_Apache2_Modplsql2_win32 universal installer not started
iAS_101330_Apache2_Modplsql2_win32 universal installer not started with Oracle 11g database installed in the same server. I tried to use the Oracle 11g universal installer to open the products.xml file under the iAS_101330_Apache2_Modplsql2_win32 directory. However, it still complained that all components must be 11g. Does anyone have experience installing Oracle 11g and Oracle HTTP Server in the same box? I don't want to use the embedded PL/SQL gateway.
Thanks.
AndyI had faced the same problem exactly and looks like this is the expected behaviour with higher version of installer.
Please download 3540563 patch (which is a software of oracle universal installer) and install it in a seperate home and using that installer you should be able to install the apache.
I am trying the same but now i am getting this problem:
"Not all the dependencies for the component Oracle Client 10.2.0.1.0 could be found..."
I will update it again if i find any solution for my above problem. -
The Oracle BI server is not running. The repositiry had to be closed
Hi guys,
I have a OBI Standard Edition 10.1.3.4.1.
I have modify the rpd and if I try to "Check In Changes", the error appears: "The Oracle BI server is not running. The repositiry had to be closed".
In the nQServer.log this error appears:
[nQSError: 12002] Socket communication error at call=recv: (Number=10055) An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
Why?
The problem persist if I restart the services.
The problem only occurs if I make a change in the Business Model Layer. The changes in the Physical Layer do not generate errors.
Thank you,
SaraHi Sara,
Can you please let us know, if there are any other messages in the NQServer.out.log ? I just googled around with this code to hit at the following link : http://www.bookmark-master.com/socket-error-10055.html
Socket error (#10055): No buffer space available.
Analyse & Solutions:
An operation on a socket or pipe was not performed because the system lacked sufficient buffer space or because a queue was full. This error indicates a shortage of resources on your system. It can occur if you're trying to run too many applications (of any kind) simultaneously on your machine. If this tends to occur after running certain applications for a while, it might be a symptom of an application that doesn't return system resources (like memory) properly. It may also indicate you are not closing the applications properly. If it persists, exit Windows or reboot your machine to remedy the problem.
From the above information, I understand that this is a system resource issue. Can you please recheck if your system has got enough resources?
Hope this helps.
Thank you,
Dhar -
Oracle Grid Infrastructure is not running.
Hi All,
I installed and configured oracle Linux 6.0,Oracle Database 11gR2 and Oracle Grid Infrastructure 11gR2. And then I went to create ASM with asmca it given me an error, saying Oracle Grid Infrastructure is not running. ASMCA needs Oracle Grid Infrastructure to configure ASM.+ I cannot create ASM and I do not know how to start ASM Instance.
Please anyone knows this help me.
Thanks,
Tharaka
Edited by: tharakaya on Jul 21, 2011 1:28 PM
Edited by: tharakaya on Jul 21, 2011 1:29 PMtharakaya wrote:
Hi All,
I installed and configured oracle Linux 6.0,Oracle Database 11gR2 and Oracle Grid Infrastructure 11gR2. And then I went to create ASM with asmca it given me an error, saying Oracle Grid Infrastructure is not running. ASMCA needs Oracle Grid Infrastructure to configure ASM.+ I cannot create ASM and I do not know how to start ASM Instance.
Please anyone knows this help me.
Thanks,
Tharaka
HI,
Before you proceed any further you need to know that Linux 6.0 is not certified yet against 11gR2
Cheers -
Oracle Universal Installer not starting, failing on pre-requisites
--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
ThanksThanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?
Maybe you are looking for
-
Mac programs for drawing or painting
Is there a free program for making drawings or paintings?
-
Error while releasing to accounting
while i am releasing a billing document to accounting folllowing error is occuring Incorrect doc.no.: 6000002. Select document number between 0090000000 and 0099999999 Message no. F5151 Diagnosis The document number you specified, "&v1", is not in th
-
Deploy J2EE Web Service with otherwise than SUN1AS
Right now i have a webservice up and running on a Sun1 that comes with J2EE1.4 tutorial. But if i try to deploy the war to other AS (say OC4J), saving the web.xml transformed to 2.3, the call to this WS fails because it says the Servlet is not a Serv
-
How to typecast the given attribute.
Hi all, I am getting an error. I am using dropdownbyindex and using following code. Iprivate<ur view name>.IEt_Fragen_output obj = wdcontect.nodeET_Fragen_output.creatEt_Fragen_outputelement(); List list1=new ArrayList();
-
I am. Unable to sync all my photos from my iphone5 to my iPad despite buying additional storage and have checked all settings etc on both devices Help I want my china photos on my pad.....