Oracle 10g upgradation.
Dear Friends,
We are using ECC6.0 and Oracle 10g (10.2.0.2) and OS is HP-UX 11 v2.
Now I want to ugrade Oracle 10g to Oracle 11g.
If any one has done, please share with me and any document for guidelines.
Regards
Ganesh Datt Tiwari
> Please provide the link from where I can download the same. I have got patch set of 10.2.0.4 but not upgrade DVDs.
Those are the files you need.
- you install 10.2.0.x
- you upgrade using the patchset to 10.2.0.4
You can (and should) upgrade to 10.2.0.5. Be aware that the general support for 10.x is ending at the end of july 2011.
Markus
Similar Messages
-
Oracle 8.0.6 to Oracle 10G Upgrade Query
Hi,
I have a customer that has Business Objects Release 5.1.x accessing an Oracle 8.0.6 database. They are planning to migrate the database to Oracle 10G Release 2.0
Will Business Objects Release 5.1.x reports run off their upgraded Oracle 10G Release 2.0 database or will Business Objects have to be migrated as well ?
Any pointers or links on this will be very helpful.
Thx in advance
Best Regards
RamdasHi
BO5.1 is not supported with Oracle10g so the user has to upgrade their BO version too.
You can download the Product documentations from help.sap.com for detailed information.
Regards
Sourashree -
Pros and Cons af Oracle 10g upgrade to 11g
Hi Basis Expert,
We have an requirement of SAP upgrade which includes BW 3.5, CRM and R/3 (4.7).
These components needs to be upgraded to the latest version
BW 3.5 to BI 7.0
R/3 (4.7) to ECC 6.0
and also CRM upgrade to the new version
The OS used is AIX and DB used is oracle 10g.
Can anybody share the pros and cons of oracle DB upgrade from 10g to 11g after SAP upgrade.
Regards,
Anil.Hi DatabaseSAP and others,
Thanks for your reply
I started with the Oracle 11g software installer. But it gave an error during 71%. Error is
Error in invoking target 'rat_on part_on dm_on olap_on sdo_on' of makefile '/oracle/DBW/112_64/rdbms/lib/ins_rdbms.mk'.
See '/oracle/DBW/oraInventory/logs/installActions2011-10-10_12-04-03PM.log' for details.
Abort Retry Continue
But when i was going thorough the installActions2011-10-10_12-04-03PM.log . I could find that there are 7 arguments which is failed.
Below are the argument details
1)INFO: Hard Limit: maximum user processes: This is a prerequisite condition to test whether the hard limit for "maximum user processes" is set to at least 16384.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
Verification Result for Node:p19849dev136
INFO: Expected Value:1024
INFO: Actual Value:9223372036854775807
INFO: -
INFO: *********************************************
INFO: Hard Limit: maximum user processes: This is a prerequisite condition to test whether the hard limit for "maximum user processes" is set to at least 16384.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:16384
INFO: Actual Value:3048
INFO: Error Message:PRVF-4354 : Proper hard limit for resource "maximum user processes" not found on node "p19849dev136" [Expected = "16384" ; Found = "3048"]
INFO: Cause: Hard limit for the resource does not meet the requirement on the specified node.
INFO: Action: Modify the resource limits to meet the requirement.
2)INFO: OS Kernel Parameter: ncargs: This is a prerequisite condition to test whether the OS kernel parameter "ncargs" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:128
INFO: Actual Value:6
INFO: Error Message:PRVF-7543 : OS Kernel parameter "ncargs" does not have proper value on node "p19849dev136" [Expected = "128" ; Found = "6"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
3)INFO: OS Kernel Parameter: tcp_ephemeral_low: This is a prerequisite condition to test whether the OS kernel parameter "tcp_ephemeral_low" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:9000
INFO: Actual Value:32768
INFO: Error Message:PRVF-7543 : OS Kernel parameter "tcp_ephemeral_low" does not have proper value on node "p19849dev136" [Expected = "9000" ; Found = "32768"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
4)INFO: OS Kernel Parameter: tcp_ephemeral_high: This is a prerequisite condition to test whether the OS kernel parameter "tcp_ephemeral_high" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:65500
INFO: Actual Value:65535
INFO: Error Message:PRVF-7543 : OS Kernel parameter "tcp_ephemeral_high" does not have proper value on node "p19849dev136" [Expected = "65500" ; Found = "65535"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
5)INFO: OS Kernel Parameter: udp_ephemeral_low: This is a prerequisite condition to test whether the OS kernel parameter "udp_ephemeral_low" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:9000
INFO: Actual Value:32768
INFO: Error Message:PRVF-7543 : OS Kernel parameter "udp_ephemeral_low" does not have proper value on node "p19849dev136" [Expected = "9000" ; Found = "32768"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
INFO: -
6)INFO: OS Kernel Parameter: udp_ephemeral_high: This is a prerequisite condition to test whether the OS kernel parameter "udp_ephemeral_high" is properly set.
INFO: Severity:IGNORABLE
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
INFO: Expected Value:65500
INFO: Actual Value:65535
INFO: Error Message:PRVF-7543 : OS Kernel parameter "udp_ephemeral_high" does not have proper value on node "p19849dev136" [Expected = "65500" ; Found = "65535"].
INFO: Cause: Kernel parameter value does not meet the requirement.
INFO: Action: Modify the kernel parameter value to meet the requirement.
7)INFO: Users With Same UID: This test checks that multiple users do not exist with user id as "0".
INFO: Severity:CRITICAL
INFO: OverallStatus:VERIFICATION_FAILED
INFO: -
INFO: Verification Result for Node:p19849dev136
WARNING: Result values are not available for this verification task
INFO: Error Message:<CV_VAL>root,|super,|zero,|</CV_VAL><CV_ERES>0</CV_ERES>
INFO: Cause:Cause Of Problem Not Available
INFO: Action:User Action Not Available
INFO: *********************************************
Please let me know what is the 7th (last one) argument.
Regards,
Anil Shenoy -
We have various applications (OLTP and DW) on Oracle 9i release 2 databases (RAC and non-RAC). Is there a document for planning the upgrade from Oracle 9i release 2 database to Oracle 10G?
Any document on how to plan the upgrade based on the applications that we have on the databases, impacts and other gotchas? Can someone point me to such documents if they exist.
Thanks.I had a problem when I was executing Catpatch.SQL (A Postinstallation task), I had to drop the schema XDB, as a workaround to this problem. I used the steps listed by Metalink to migrate from 9.2.0.5 to 10.1.0.2.
The metalink doc id is: 263809.1
Subject: Complete checklist for manual upgrades to 10g.
Regards,
Raj -
Oracle 10G upgrade and MRP planning problems
We just upgraded to Oracle 10G and are having users complaining about MRP not planning in correct low level code sequence. What has happened is that the MRP is planning component parts before the parent parts. We have never had this occur before and are on 4.6C hot pack 38. Help!!
Hi,
There are some Post-Upgrade Tasks like set compatible, db stats, check invalid objects, removing some database parameters, etc. Make sure you perform these if you have not, please refer to your specific Oracle upgrade guide.
Thanks,
George -
Hi,
Iam 9i OCP certified i want to give a upgrade paper to 10g (DBA ) . can u please help me with the documentation as what study material i need to crack the 10 g papaerHi,
Iam 9i OCP certified i want to give a upgrade paper to 10g (DBA ) . can u please help me with the documentation as what study material i need to crack the 10 g papaerThe exam topics are covered in this link:
1Z0-040, Oracle Database 10g: New Features for Administrators™
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_040
Certification Upgrades
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=44
No study material or questions can be provided as this considered as cheating!
Thanks,
Hussein -
Hi
I installed Oracle enterprise edition 10.2.0.1 in Red Hat Linux x86-64and intend to apply patch 10.2.0.4
in some topic in this forum mentioned about the Ultra Search , if this component is not
installed the DBCA will gives you a error.
Before i appply the patch i try to install this component ,once i go to the DBCA and
select the -- Configure Database Options and
select the -- Database
and i try to select the Component Ultra Serarch , but it is in Grey and cannot select the component
How i can fix this issue
rdsYou have just looked at the commands given there but ignored the link in the first line.
Chapter 4, "Installing Oracle Ultra Search"
http://download.oracle.com/docs/cd/B19306_01/ultra.102/b14222/install.htm#BABGCICC -
Oracle 10g to 11g Upgrade - Oracle Clusterware problem
Oracle10g RAC (2 Nodes) RHEL 4 64bit
Hi All,
I have began the procedure for upgrading Oracle Clusterware to 11g. However, during the install OUI was giving me certain error messages like it couldn't transfer the OUI installlogs to node 2. Well, I kept pushing through the install and after I ran the last rootupgrade script on node 2 it gave me the following error:
Checking the existence of nodeapps on this node
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Creating '/crs/home/install/paramfile.crs' with data used for CRS configuration
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/ops/opsctl/OPSCTLDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Failed to retrieve VIP details
Setting CRS configuration values in /crs/home/install/paramfile.crs
So I ignored the error for the time being and after that I checked the status of crs and it gave me the following:
[oracle@vtl-rac2 crsd]$ crsstatus
HA Resource Target State
ora.VMRACDEV.VMRACDEV1.inst ONLINE ONLINE on vtl-rac1
ora.VMRACDEV.VMRACDEV2.inst ONLINE ONLINE on vtl-rac2
ora.VMRACDEV.db ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ASM1.asm ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.LISTENER_VTL-RAC1.lsnr ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.gsd ONLINE ONLINE on vtl-rac1
ora.vtl-rac1.ons ONLINE OFFLINE
ora.vtl-rac1.vip ONLINE ONLINE on vtl-rac1
ora.vtl-rac2.ASM2.asm ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.LISTENER_VTL-RAC2.lsnr ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.gsd ONLINE ONLINE on vtl-rac2
ora.vtl-rac2.ons ONLINE OFFLINE
ora.vtl-rac2.vip ONLINE ONLINE on vtl-rac2
So i tried to bring it back up by doing a crs_stop -all and crs_start -all and it gave me the following error:
vtl-rac1 : CRS-1019: Resource ora.vtl-rac2.ons (application) cannot run on vtl-rac1
Start of `ora.vtl-rac1.ons` on member `vtl-rac1` failed.
vtl-rac2 : CRS-1019: Resource ora.vtl-rac1.ons (application) cannot run on vtl-rac2
CRS-0223: Resource 'ora.VMRACDEV.db' has placement error.
CRS-0215: Could not start resource 'ora.vtl-rac1.ons'.
CRS-0215: Could not start resource 'ora.vtl-rac2.ons'.
I am thinking that all of this is caused by the various issues I had with the install. If I am incorrect, then please let me know. If it is true, I would like to know if there are any 11g docs on how to clean up a failed clusterware upgrade. Any advice would be greatly appreciated on any of the situations I am having.
Thank youHi Chandra,
Did CVU report any problems before the upgrade?No, there were no errors reported by CVU before the upgrade.
I don't there is note out there for cleaning 11g CRS
install...and I think can very use the 10g CRS note -
239998.1.Yeah I might have to go that way.
I have both the 11g CRS install and upgrade from 10g
to 11CRS at
http://chandradba.blogspot.com/2007/08/oracle-11g-rac-
install-on-red-hat-50.html
and
http://chandradba.blogspot.com/2008/02/oracle-10g-crs-
upgrade-to-11g-crs.html
see if it helps.Yup, your guide is very simple, clear and error proof :) That's how mine when pretty much except right around 75% I started getting these strange errors of files not being able to be transferred to node 2. Anyways, it shouldn't be a problem as none of those errors were configuration related...or else I would have a messed up cluster.
Well, I actually rebooted both machines and now the whole CRS stack is up!! So I guess I am ok. We'll just have to wait and see.
Thanks for your help Chandra...I always appreciate it. -
SAP cannot start Oracle after Upgrading to 10g
I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
the following log are in startdb.log. Please give me an idea what to do to solve this problem.
S27adm 22> more startdb.log
Mon Jun 2 13:00:22 GMT: 2008
LOGFILE FOR STARTING ORACLE
Mon Jun 2 13:00:22 GMT: 2008
checking required environment variables
ORACLE_HOME is >/oracle/S27/102_64<
ORACLE_SID is >S27<
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
check initora
Mon Jun 2 13:00:22 GMT: 2008
checking V2 connect
TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/S27/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
SERVICE_NAME = S27.world)))
OK (0 msec)
tnsping: V2 connect to S27
Mon Jun 2 13:00:22 GMT: 2008
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Mon Jun 2 13:00:22 GMT: 2008
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Mon Jun 2 13:00:22 GMT: 2008
starting database
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 2533359616 bytes
Fixed Size 2199816 bytes
Variable Size 2025713400 bytes
Database Buffers 503316480 bytes
Redo Buffers 2129920 bytes
Database mounted.
SP2-0158: unknown SET option "charwidth"
no rows selected
Not a terminal
Not a terminal
Database altered.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Mon Jun 2 13:00:46 GMT: 2008
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
Mon Jun 2 13:00:46 GMT: 2008
/usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
Good Luck
Nag Anthati -
Upgrading IMP/EXP utility in ORACLE 10g
Hi,
I have installed Oracle 10g 10.2 Enterprise edition.Can I upgrade the the version of the EXP/IMP utility od my oracle so that i can import dump files which are exported from Oracle 11g 11.2 version.
Thanks in advance,
Anindyauser13006709 wrote:
Hi,
I have installed Oracle 10g 10.2 Enterprise edition.Can I upgrade the the version of the EXP/IMP utility od my oracle so that i can import dump files which are exported from Oracle 11g 11.2 version.
Thanks in advance,
Anindya
No, you must use the imp utility from target database which is 10g.
Cheers -
Upgrade Oracle 10g 10.2.0.2 to 10.2.0.4
Hi,
Is there anybody there, who upgrades Oracle 10g 10.2.0.2 to 10.2.0.4.
May I know where did you download and how you did it as I check the SAP Note 1137346, there is before and after upgrade but nothing about the upgrade process and I can't file the upgrade file as well.
Thanks for the help
P.S.: Our OS is Windows 2003 and we are running NW2004s , EP7.Hello,
not sure exactly what do you want.
Is there anybody there, who upgrades Oracle 10g 10.2.0.2 to 10.2.0.4.
Yes, me, for example
May I know where did you download and how you did it.
SAP Service Marketplace
http://service.sap.com/oracle-download
-> Oracle 10.2.0.4 -> Database RDBMS -> Your OS
Note that still is not available for Itanium (MS Windows Itanium (64-bit))
The instructions to install any patch set can be found on the patch ser (README file)
you can also take a look at the note 839187 Oracle Database 10g: Patch set installation -
Oracle 10g RAC to 11g RAC Upgrade on Solaris
Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanksa) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com -
Regarding MOSD 454811.1 ( Upgrading OracleAS 10g Forms and Reports in Oracl
I Installed R12.1.1 and now upgrading it to 12.1.3. I am following document 1080973.1.
As per MOSD 1080973.1, We need to upgrade Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12.
Currently Version is 10.1.2.3 and in the document it's written that after applying all the patches, Chk that version should be 10.1.2.3
Do I really need 10G AS form & report upgradation ?Hi..10.1.3.X is for IAS ORACLE HOME. I am asking about FORMS & REPORT HOMESorry, I got confused with your line --> "As per MOSD 1080973.1, We need to upgrade Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12. "
Currently Version is 10.1.2.3 and in the document it's written that after applying all the patches, Chk that version should be 10.1.2.3
Do I really need 10G AS form & report upgradation ?Yes, you need it. As mentioned in the doc "If customers are already on 10.1.2.3.0, follow instructions in Step 3.2 to apply the bundle patch.".
Thanks,
Hussein -
I have install oracle 10g express edition 10.2.0.1 for windows 2003
now I want upgrade to 10.2.0.4,I download p6810189(10.2.0.4 patch)
When I upgrade 10.2.0.4 at OUI,have 2 option I don't know how to fill
Specify File Locations
1.Name:
2.Patch:
my oracle was installed at c:\oraclexe
oracle Home:C:\oraclexe\app\oracle\product\10.2.0\server
oracle BASE:C:\oraclexe\
oracle home_name:XE
oracle sid:XEHello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM -
After upgradation from Oracle 9i to Oracle 10g,one proc is throwing error
recently upgraded from Oracle 9i to Oracle 10g. We have some Oracle procedures which are not working in Oracle 10g.
A section of code from one of the procedures looks somewhat like the code below:
Declare
Cursor c_matched_records (…..) is
Select a.field 1, b.field2
From table1 a, table2 b
Where a.field3=b.field1
FOR UPDATE;
BEGIN
For records in c_matched_records
LOOP
-- Continue processing
-- Update records
COMMIT;
END LOOP;
END;This section of the code throws out the following error in Oracle 10g
ORA-01002: fetch out of sequence during PUT outputFile file
However this code was working fine in Oracle 9i.
please help me with this?
ThanksI believe you are lucky that the pl/sql is okay in Oracle 9i. How about remove the commit statement? Why do you need it in the loop. I look up metalink. You may refer to article ID 257914.1
Maybe you are looking for
-
Beginner needs help: how to reach the Petstore application
Hello, I have just successfully deployed the petstore application (at least the .war) on oc4j and I can't reach the petstore web app. Here is what I point to in the browser: http://localhost:8888/petstore/ I get a 404. Can anyone help please? Julien
-
Hi, Is there any function module, BAPI for transaction COWBHUWE to post goods reciept for Process Order? I have tried below function modules - 1) HU_CREATE_GOODS_MOVEMENT: The FM is get out at line no 56 as the Object Type for all the HUs i have foun
-
My "recent calls" no longer appear after updating to iOS6
Is anybody having a similar problem? When I go to recent calls, it stays blank no matter how many calls I make, receive or miss.
-
Maximum number of photos in library?
I have more than 16500 photos in my iPhoto 5 library. When I try to add more photos, the program crashes after the import, apparently while "digesting" the photos. I tried rebuilding the library, no help. The only way I found to cure the problem seem
-
Need list of recurring jobs in scheduler
Hello, I need a list of all the reports scheduled. And the recurring jobs specific. I need also al the parameters one needs to fill in the form when scheduling a report (like: every thurstday, next runtime, to emailadress, etc etc). BO had the tool i