Oracle 10g XE - Want to install OMA for Grid Control

I have a client machine that uses 10g XE as the
Oracle database.
How can I add this database to 10g Grid Control (in
other words how do I install the agents on this
server) ? (windows 2003, not linux or unix)
You install agents on the server, just like installling agents on any server. Download the Enterprise Managerment Grid Control disks from http://www.oracle.com/technology/software/index.html and select 'Install Additional Agent'.
Grid Control will not provide the same level of administration in Express as it does in the other Editions.

Similar Messages

Installing and configuring Grid Control 10gR3

I want to install and configure Grid Control 10gR3, This is my first time experiance for this project, need help, what steps i should take? Like first create 10g DB as repository, then install grid control and how to install/configure agents, want to clear my concepts

Do not quite understand your question. The documentation link you provided is the Installation and Basic Configuration Guide for Grid Control 10.2.0.3. The document contains installation and configuration information.

W2k8 is 32-bit,which oracle 10g version should be installed?

Hi everyone,
I am a new DBA. Now I will install Oracle 10g on w2k8. I found w2k8 is 32-bit system, i am wandering which oracle 10g version I should install?
Thanks!

Go to http://www.oracle.com/technology/software/products/database/index.html
Note that Windows 2008 explicitly is listed against 11.1.0.7
Therefore, you can assume that 11.1.0.7 is the first that definitely supports W2008.
And you can assume that anything older than that line is definitely not supported.
And if it is not supported (as is the case for 10g), you can assume that you will run into some kind of problem either during installation or (worse) at some unknown time later.
You can probably find some workaround to make it appear to work. Which is fine ... it's your job. (At least until it stops working.)

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

I want to install webutil for Forms [32 Bit] Version 10.1.2.0.2 (Production

hi all
i want to install webutil for version Forms [32 Bit] Version 10.1.2.0.2 (Production) plz guide me with full of configurations .Already i searched the forum but i am still not able to install.Plz help me out.thanks in advance.
sarah
Edited by: SarahSarahSarah on Sep 13, 2009 11:58 AM

Fully agree with Michael's answer.
For all things webutil the best place to start is the webutil home page on OTN.
In appendix A of the webutil pdf there is a handy checklist.

Creating a Oracle 10g stored procedure as a datasource for crystal 9 repor

Can someone direct me to instructions or information on how to create a Oracle 10g stored procedure as a datasource for my Crystal Reports 9.0 report?

i've found this example for you
http://www.pdssoftware.com/newsletter/mar07/page6.htm
and you could be able to get the guides from the SAP guide website for the products
http://help.sap.com/businessobject/product_guides/
hope this was helpful
good luck
Amr

Database limits for Grid control repository?

Document "Oracle® Database Licensing Information / 10g Release 2 (10.2)" [Part Number B14199-10] discusses the restricted use license of database for grid control repository and rman repository use.
nfrastructure Repository Databases A separate Oracle Database can be installed and used as a Recovery Manager (RMAN) repository without additional license requirements, provided that all the Oracle databases managed in this repository are correctly licensed. This repository database may also be used for the Oracle Enterprise Grid Control repository. It may not be used or deployed for other uses.
A separate Oracle Database can be installed and used as a Oracle Enterprise Manager Grid Control (OEM Grid Control) repository without additional license requirements, provided that all the targets (databases, applications, and so forth) managed in this repository are correctly licensed. This database may also be used for the RMAN repository. It may not be used or deployed for other uses.
There is no discussion of licensing requirements for options of the database (RAC, partitioning, etc) when the database stays within these repository use restrictions. Therefore it is unclear whether the Grid Control can be configured to provide appropriate monitoring without additional licenses.

This is the reply I received from release
management:
If they have deployed an EE edition of the database
as an OEM repository, and then want to protect that
with RAC or Data Guard, or make more Secure with ASO
or Database Vault, or indeed get any of the
additional benefits any of the options provide, then
they will need to license the option.
Let me know if that is still not clear, and I'll go
back again.Thanks.
There is a minor inconsistency in their response ... they say "if deployed on EE". However, as far as I know OEM repository required VPD, which is available only on Enterprise Edition (see http://download-east.oracle.com/docs/cd/B16240_01/doc/em.102/e10953/pre-installation_req.htm#CHDGIEAD)
However, it is quite clear that 'they' are telling us that the RAC option is not inherent in the "Special Use Licensing" as described http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/editions.htm#CJAHFHBJ .
The implication (not necessarily a topic for this forum) is that the OEM is not guaranteed to be able to provide basic monitoring and reporting functionality without additional license fees to make OEM more highly available than the targets being monitored.
It would be nice to have the information about which Oracle products (database and app server) have included licenses with a basic Grid Control install and which require additional licenses as part of Chapter 1 of http://download.oracle.com/docs/cd/B19306_01/license.102/b40010/toc.htm (That document goes into excruciating detail about the extra packs, but ignores the basics.)
For that matter, since OEM Grid Control can not be purchased, it would be nice to have a list of products that provide license to install Grid Control, again in Chapter 1 of the Grid Control Licensing document listed above.
I appreciate your time in having dug into this.

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

How to figure out server has capacity to install OEM 10 Grid control

How to figure out server has capacity to install OEM 10 Grid control
Hi Experts
I have HP_UX 11.11 server which has 1 instance on it with version 10.2.0.1.0.
Now I would like to install Grid control with a separate instance for repository.
I was told I would need 2 GB Ram for OMS and 2 GB Ram for instance.
Now how do I figure out if my server has enough resources from Ram perspective
Following is output from top and vmstat
1. for top it says 3045556K free , now is this free memory virtual(real +swap) or real?
2. as per top I only have free 3GB(3045556K) , so does that mean I can not have OMS & repository on
this server ?
3. In vmstat I see free memory as 762335
in man it says free - Size of the free list
what does this mean, how much is my free meemory ?
4. For OMS I read - It is a J2EE application that is installed and deployed using Oracle
Application Server
Now when I look at top I see these processes
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Does oasadm user means Oracle application server ? If yes does it mean I will not
need 2GB for OMS ?
cov6817:plmbomdv $ vmstat 2 5
procs memory page faults cpu
r b w avm free re at pi po fr de sr in sy cs us sy id
1 0 0 3348627 762335 69 11 0 0 0 0 0 1014 4916 671 12 1 87
1 0 0 3348627 762284 17 0 0 0 0 0 0 1040 10514 886 1 0 99
1 0 0 3330668 762284 10 0 0 0 0 0 0 1031 7820 872 0 0 100
1 0 0 3330668 762284 9 0 0 0 0 0 0 1033 6173 873 0 0 100
1 0 0 3330668 762284 5 0 0 0 0 0 0 1029 5468 891 1 0 98
cov6817:plmbomdv $ top
System: cov6817 Wed Jul 18 08:48:43 2007
Load averages: 0.02, 0.04, 0.03
267 processes: 215 sleeping, 51 running, 1 zombie
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.03 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
1 0.03 0.6% 0.0% 0.4% 99.0% 0.0% 0.0% 0.0% 0.0%
2 0.02 0.6% 0.0% 0.2% 99.2% 0.0% 0.0% 0.0% 0.0%
3 0.01 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
avg 0.02 0.4% 0.0% 0.2% 99.4% 0.0% 0.0% 0.0% 0.0%
Memory: 8733312K (7157492K) real, 15353696K (13382776K) virtual, 3045556K free Page# 1/10
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Thanks a lot
New DBA

how much is my free meemory ?Do you have kmeminfo command installed?
4. For OMS I read - It is a J2EE application that is
installed and deployed using Oracle Application Server
s oasadm user means Oracle application server ? If
yes does it mean I will not need 2GB for OMS ?Even if that java vm is an instance of Oracle AS (OC4J), the Grid Control installs a separate instance of AS. The choice to install OMS app to any existing AS home does not exist in any version I know.
Find out what more is running on the box and how much resources (i.e. RAM) those apps are configured with.

A possible bug for Grid control?

Hi, Dear all,
We installed Grid control 10.2.0.1 on Redhat Linux R3 with existing database(10.2.0.4).
During the installation, we succeeded for repository creating but failed at OMS Configuration.
When I start oms in cmd line, I got the following error: the repository database can not be connected.
The description for the environment:
1. OMS server and repository database are installed on the same server, on which HA is used.
2. There are two floating IP on this machine,
IP | server name | used for |
xx.xx.xx.124 | cnsz030318 | oms server |
xx.xx.xx.80 | oem.db.paci.com.cn | repository database |
3.When we installed the oms with OUI, the repository server we input is oem.db.paci.com.cn
The problem we found:
During the installation, the repository was created successfully. But it failed at OMS configuration.
The error we got: the repository database can not be connected.
there are two lines in emoms.properities which seems strange:
oracle.sysman.eml.mntr.emdRepServer=oem.db.paic.com.cn
oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=cnsz030318.db.paic.com.cn)(PORT\=1535)))(CONNECT_DATA\=(SID\=oem10g)))
The emdRepServer is what we have input on OUI:oem.db.paic.com.cn. But for the connectDescriptor, it is changed to "cnsz030318.db.paic.com.cn", which does not exist at all!.
Now, we have worked around this problem by adding "cnsz030318.db.paic.com.cn" in the /etc/hosts.
But my question is, why the connectDescriptor set the HOST\ as cnsz030318.db.paic.com.cn? Why does it not use the name we input in OUI (oem.db.paic.com.cn)?
Maybe it is a bug for Grid control?

Did you install with "Use existing database" or "Use new database"?
I recommend that you use fully qualified domain names only!
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 7, 2009 2:24 PM

What is Hardware/O.S. Recommendations for Grid Control server

I understand both Linux and Window servers are supported for Grid Control Installation.
However, since we are running Exadata database and cells, what would be your recommendation when we choose which O.S. we should run G.C. on?
Since the entire Exadata environment is running Linux, so, personally I'd prefer to use Linux server. But, what is your preference, and please detail your reasons.
Thank you!
Edited by: 943714 on Jul 12, 2012 9:37 AM

Grid Control (OEMGC 11g) for Windows is only available (certified) for 32 bit Windows. So you can run into memory limitations, dependeing on the number of agents/targets you will be monitoring. Second you have to install Cygwin on your Windows server if you want (or need) to be able to SSH to a Linux/Unix server. Installing Cygwin is very problematic to say the least.
If you would use OEMCC (12c), and I don't know why you wouldn't, you can install the 64 bit version for Windows however you still have to install Cygwin.
So in your case I would go for the Linux version.
Eric

Install Enterprise Manager Grid Control 10.2.0

Hi,
to install Oracle Enterprise Manager Grid Control 10.2.0. should I
1-install 10g Release 1 (10.1)
2-Apply patch nnnn (Which number ) ?
Is it possible to install Enterprise Manager Grid Control 10.2.0. from scratch ? Where can I download the ressource ?
Thank you.

You can check this:
[http://www.oracle.com/technology/software/products/oem/htdocs/gridR3_10203_readme.html]
steps are outlined here:
[http://www.oracle-base.com/articles/10g/Oracle10gR2GridControlInstallationOnRedHatAndCentOS.php]
Edited by: Anantha on Apr 14, 2009 11:23 AM

Urgent-- Do we have 10.2.0.2 s/w for grid control on solairs environment

Hi,
Do we have 10.2.0.2 software for grid control management server on a sun solaris sparc environment? I see we have one for agent but we are not seeing anything w.r.t to OMS ?
Your help is appreciated!
Sravanthi.

The error we are getting is (from .err file ) :
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:243)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4494)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4443)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:126)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

Problem Load Balancing connections for Grid Control Console on port 80!

I have two OMS and I'm balancing connections for Grid Control Console using a Software Load Balancer according with "Oracle Enterprise Manager Advanced Configuration". I have success where the load balancer is listening on port different to 80. When I configure Load Balancer to listen on port 80(architecture requirement) and distribute load between the two OMS(Port 7779), when login to Enterprise Manager Console the URL on the web browser changes to the port configured for HTTP server (port 7780) wich produces an "unable to connect" error message; and this behaviour also happends in some of the internal links of Grid Control Console too. Any ideas?
Thanks in advance!
Message was edited by:
user463224

I got it working, changing the "Port" directive to 80 on httpd.conf on HTTP Server

Oracle-10g RAC on VMware installed on Windows-7(Host)

Hi,
My host OS is Windows-7. Docs. posted on this forum for RAC on VMware says: your Host OS should be Centos OS and in which you will install VMware and Client tools also. In this way u can clone another RAC2 machine.
But I have Oracle VM Virtual Box installed on Windows-7. Another is VMware Player installed on Windows-7.
I want to install Oracle-10g RAC on my Laptop. Please any suggestions or Docs. related to this.
Shakeel

Hi,
while this is a documentation of 11gR2 it gives enough information on how to setup a RAC in a VBox environment:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Regards
Sebastian

Oracle 10g XE - Want to install OMA for Grid Control

Similar Messages

Maybe you are looking for