Oracle 10gAS and 11g Database

hi,
I am planning to upgrade our existing Oracle 8i & forms6i to oracle 11g database and 10g AS.
I have only one server for both. 10gAS has a database along with the installation.
But i need to use 11g DB. so my questions are
1.how do we avoid installing 10g databse as a part of AS.
2. Which one to install first. 11g database or 10gAS(i have only one server).
3. 10g Developer suite will be in my local PC. is it right ?

I guess it really depends on what you want to do :
If you want to change as little as possible, I would advise the Forms and Reports Services Standalone, available from OTN. This version is certified with RDBMS 11gR1 but not with RDBMS 11gR2. Note that additional functionality such as Single Sign-On will not be available in this standalone version.
Should you want the full blown functionality, I would advise to skip AS10g and go straight for FMW11gR2 (11.1.1.2). You will need an infrastructure but that can be done with Identity Management 10.1.4.3 with an 11gR2 (11.2.0.4) database. The FMW11g documentation will tell you how.
BTW - the developer suite most likely need to be on your local PC. For FWM 11gR2, the builders are only supported on Linux 32 bits and Windows 32 bits platforms.
Hope this helps,
EJ

Similar Messages

I have created TM lock in oracle 9i and 11g databases. by using same query

here is the query uesd for finding a lock in database.
select /*+ RULE */ 'DATAPOINT # ' bpb,
l.sid, ' # ',
s.username, ' # ',
s.sql_address, ' # ',
x.sid, ' # ',
y.username, ' # ',
l.type, ' # ',
l.id1, ' # ',
l.id2, ' # ',
decode(X.LMODE,
0, 'None',
1, 'Null',
2, 'Row Share',
3, 'Row Excl',
4, 'Share',
5, 'Shr Row Excl',
6, 'Exclusive',
decode(L.REQUEST,
0, 'None',
1, 'Null',
2, 'Row Share',
3, 'Row Excl',
4, 'Share',
5, 'Shr Row Excl',
6, 'Exclusive',
from v$session s, v$lock l, v$lock x, v$session y
where l.ctime > 120
and s.lockwait = l.kaddr
and l.type in ('TM', 'TX', 'UL')
and l.id1 = x.id1
and l.id2 = x.id2
and x.sid != l.sid
and x.sid = y.sid
and x.lmode >0;
after doing further investigation i found that for 11g condition s.lockwait = l.kaddr not satisfied where as for 9i it's gives correct results
here are the lockwait and kaddr values for 9i and 11g databases.
for oracle 9i
SQL> select lockwait from v$session where sid in (10,12);
LOCKWAIT
67B4E10C
SQL> select kaddr from v$lock where sid in (10,12);
KADDR
67B4E088
67B4E10C
for oracle 11g
SQL> select lockwait from v$session where sid in (70,134);
LOCKWAIT
070000002FA080D8
SQL> select kaddr from v$lock where sid in (70,134);
KADDR
0700000030C595C0
0700000030C59830
00000001108E3E58
00000001108E3E58
070000002FA6CB30
SQL>
please advise if there is any change for calculations for lockwait,kaddr for 11g.

can you post your query with explain plan for both 9i version and 10g version.
Thanks,
karthick.

What is the diffrence between 10gAS and 11g fusion middleware?

hi,
i want to know about, we have installed R12.1.1 on test server . we have installed 10gAS and the database is 11g for form and reports in another server. but our management want's oracle 11g fusion middleware on it.
what is right decision should i suppose to take.
and also please say why should i go with 10AS why not 11g fusion middleware.
thank you
kamal abbasi

Those letters simply indicate the region where the MacBook will be sold.
LL = North America
LZ = Chile, Paraguay, Uruguay.
http://www.jbfaq.com/article.asp?id=63

How to Install oracle 10g and 11g on aix 6.1

Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
Chetan
Edited by: chetan0926 on Jan 11, 2012 2:56 AM

Hi;
Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
I agree Sybrand, Please check installation guide. All your questions will be answered in it
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Important differences between oracle 10g and 11g

Hi friends, can anyone tell me (pointwise) what are the major (and minor) differences between Oracle 10g and 11g.
Please point me to some documents if possible.
Thanks in advance

The name of the link says it all: "top_features."
In short it is Oracle's list of what they have for marketing and sales reasons designated "top features."
It is not intended to be, and is not, a complete list of features. Often the features Oracle does not
talk about are the most important.
Let me give you some examples. I have never seen Oracle announce DBMS_XPLAN as a new feature
yet you should not run an explain plan without it. Neither have I ever seen Oracle announce the new
NO_DATA_NEEDED predefined exception. I have listed literally hundreds of new features you will not
find in Oracle's new features docs.
I did a presentation at OpenWorld this year as part of the unconference titled "New Features in
Database 11gR2 that Oracle will not announce." It was easy to prepare a one hour presentation with
little fear of being proved incorrect. As I turned out only one of the features I presented was mentioned
by Oracle.
You can find the presentation slides here:
http://www.morganslibrary.org/pres/oow09_ucnf.pdf

Differences between Oracle 9i and 11g

Hi,
We are planning to migrate various PLSQL objects from Oracle 9i to Oracle 11g.
We have around 200 packages and Staored procedures Oracle 9i, can some one let me know if there are any specific items to look before we migrate from Oracle 9i into 11g so that everything works fine after the migration.
Please let me know major differences amognst in-built functions between Oracle 9i and 11g.
Thanks.

Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks

Oracle Enterprise Manager 11g Database Control log file location

Any one knows where the log file is for Oracle Enterprise Manager 11g Database Control. I am trying to set up EUS proxy authentication and running into issues when trying to search proxy user in my DB. The search returns no results and I am not sure where to look for. Please not my setup does work for EUS with shared or exclusive schema. I need to use Oracle DB proxy authentication for my application and that would need a setup of EUS with proxy permissions so please advice if you know where the log file is for Oracle Enterprise Manager 11g Database Control or if there is any logging I can turn on to see what search parameters are passed from Oracle Enterprise Manager 11g Database Control to my DB by using DB audit etc.
Thanks,

Be patient...wait for report.
If after some time report does not appear, go to Advisor Central and find it there.
:p

Oracle 10g and 11g April PSU

Hi,
Can you please tell when Oracle releases April 2013 PSU for 10g and 11g databases?
Thanks,
...

Released last week.
*Patch Set Update and Critical Patch Update April 2013 Availability Document [ID 1525152.1]*

Diff between oracle 10g and 11g

Can any one could tell me what is the main diff between oracle 10g and 11g ?
Thanks in Advance
Venkat

Hi,
You can read
http://www.oracle.com/technetwork/articles/sql/index-082320.html
http://www.oracle.com/technetwork/articles/sql/index-099021.html
Anand

Can we locate oracle 9i and 10g databases in same PC

hi all
wish U happy new year...
I have installed oracle 9i and 10g database ..but 10g database is not working it says TNS protocol adapter error or invalied username password...I stpeed the 9i services and listner in the 9i home...but 10g database is not working.9i and 10g databases are in two different partitions....
I want to know is it possible to running 9i and 190g database in same PC...if it's possible pls can you give me a solution for my problem
regards
Buddhike

when I was trying to up the database it is looking for another listener
and massage coming listener is not running...Not clear. The database does not look for a listener, maybe you got that error when trying to connect ?
Do you have a listener 10g service ? Did you start it ? If not, please try the following :
C:\> set ORACLE_HOME=<Your 10g Home>
C:\> set PATH=%ORACLE_HOME%\bin;%PATH%
C:\> lsnrctl start
wait up to a minute, then execute
C:\> lsnrctl status
and post the result.

Oracle 10g and 11G on RHEL 6

Hi,
Is it fine to install oracle 10g and 11g on RHEL 6?
Please guide!!
thanks

Hi;
Is it fine to install oracle 10g and 11g on RHEL 6?Its not certified as mention. But if you want to make installation on that release see Tim's site:
http://www.oracle-base.com/blog/2011/02/13/oracle-11gr2-on-oracle-linux-6/
Regard
Helios

Golden Gate 32bit for Oracle 10g and 11g

Does oracle released Golden Gate 32bit for Oracle 10g and 11g, i could not able to find out 32bit http://edelivery.oracle.com or OTN.
Thanks

never mind, i was able to download from e-delivery.

Installing oracle 10g and 11g client on the same Linux RHEL 5.4 host

Is it possible to install Oracle 10g and 11g client on the same Linux RHEL 5.4 host and have the application switch between 10g and 11g? and how would the 10g and 11g be installed?

Thanks for your reply.
Typeically if 10g is installed in /home/roacle/product/10.2.0, are you saying that for 11g, it would be /home/oracle/product/11.0.0 ?
How about switching the application? Does changing the ORACLE_HOME and PATH environment variable setting enough ? Let's say from
ORACLE_HOME=/home/oracle/product/10.2.0/client_1 to /home/oracle/product/11.0.0/client_1

Oracle RMAN and SAP Databases

Hi all,
Am mainly an Oracle DBA and had just recently return to supporting SAP customers after a 4 year absence of supporting non-SAP customers.
Anyway, I have some question on using Oracle RMAN with SAP databases. Backup softwares are Netbackup and Data Protector.
I managed to get the backup working, that is, there is no issues, Oracle RMAN backup using SAP's brarchive and brbackup works alright. My question is about using an Oracle RMAN catalog. I've read thru several SAP documentation and cannot find one where I can use a RMAN catalog.
Reading from
http://help.sap.com/saphelp_nw04/helpdata/en/d1/43d7cab9a04a409cc46876e36762c2/content.htm
Does that mean I cannot use a RMAN catalog? Had anyone managed to use a RMAN catalog to do the RMAN backup?
*Another question I have is, do I need Netbackup and Data Protector if I want to run RMAN backup to disk via brarchive and brbackup? Does backint requires a SBT library to use RMAN? What I mean is, I want to use RMAN but doing backup to disk instead of to tape which means I don't need the tape library installed, will backint know that this is the case and will not look for the tape library?
Any advise or feedback on this will be very much appreciated. Thanks in advance.
Extracts from http://help.sap.com/saphelp_nw04/helpdata/en/d1/43d7cab9a04a409cc46876e36762c2/content.htm are as below:
The Oracle Recovery Manager (RMAN) is an Oracle backup program. You can use it as a command line interface (CLI) or as a graphical user interface (GUI) in the Oracle Enterprise Manager (OEM). We support RMAN with the SAP backup tools BRBACKUP and BRARCHIVE.
RMAN uses the System Backup to Tape (SBT) interface to back up to tape devices. We implement SBT using the SAP backup library. External backup tools can implement this interface as a dynamic link library (DLL).
Integration
By integrating RMAN into BRBACKUP, you can add security and flexibility to important functions in existing backup strategies and tools:
· The recovery catalog is not used. The backup information is stored in the control file. After the backup, the control file is also backed up. In a restore, the control file is restored first, followed by the data files.
· The integration of RMAN into BRBACKUP also guarantees integration into the SAP Structure linkComputing Center Management System (CCMS).
· BRBACKUP tape management functions as previously (that is, as when using the SAP backup library).
· You can still use the BACKINT interface with external tools.
· All previous SAP backup strategies are supported while using RMAN. Nevertheless, RMAN is not supported for standby database backups and split-mirror backups.
· The following components are delivered with the standard Oracle8 installation:
¡ RMAN with the Oracle SBT interface
¡ Backup library and backup tool Networker from Legato
¡ Legatou2019s BACKINT interface implementation (as of Oracle 8.0.5)
The SAP installation also delivers the SAP backup library with BRBACKUP and BRARCHIVE.
Edited by: newbie01.sap on Jun 11, 2010 10:50 AM

Hi,
This question has been answered by Stefan Koehler. Not sure why the thread is not updated by his response. I am hoping to give him the max points actually.
It was a very good response which is as below:
Subject: Re: Oracle RMAN and SAP Databases
Message: Hello,
> Does that mean I cannot use a RMAN catalog? Had anyone managed to use a RMAN catalog to do the RMAN backup?
Correct - if you are using the BR*Tools and RMAN you are not able to use a RMAN catalog with it.
You can do manual catalog syncs, but the BR*Tools are not supporting a catalog database.
>Does backint requires a SBT library to use RMAN?
Check this documentation (Point "RMAN Backups Without Backup Library"): http://help.sap.com/saphelp_nw04/helpdata/en/3f/9d800e1aec11d2b42c00609419997a/content.htm
> Any advise or feedback on this will be very much appreciated.
We are also using RMAN for taking backup of all our oracle database (SAP and non-SAP), but without any BR*Tools.
That is also possible - check sapnote #105047 (Part "50. Recovery Manager (RMAN)").
As you mentioned, that you are a fulltime DBA you should have enough knowledge to use RMAN without BR*Tools.
Regards
Stefan

Issue with materialized view and fast refresh between Oracle 10g and 11g

Hi all,
I've hit a problem when trying to create a fast-refreshable materialized view.
I've got two databases, one 10.2.0.10, another 11.2.0.1.0, running on 32-bit Windows. Both are enterprise edition, and I'm trying to pull data from the 10g one into the 11g one. I can happily query across the database link from 11g to 10g, and can use complete refresh with no problem except the time it takes.
On the 10g side, I've got tables with primary keys and m.v. logs created, the logs being of this form ...
CREATE MATERIALIZED VIEW LOG ON table WITH PRIMARY KEY INCLUDING NEW VALUES
On the 11g side, when I try to create an m.v. against that ...
CREATE MATERIALIZED VIEW mv_table REFRESH FAST WITH PRIMARY KEY AS SELECT col1, col2 FROM table@dblink;
... I get an ORA-12028 error (materialized view type is not supported by master site).
After running the EXPLAIN_MVIEW procedure it shows this;
REFRESH_FAST_AFTER_INSERT not supported for this type mv by Oracle version at master site
A colleague has managed to build a fast-refresh m.v. from the same source database, but pulling to a different one than I'm using; his target is also 10g, like the (common) source, so I've no idea why I'm getting the 'not supported' message whilst he isn't.
I've been able, on previous projects, to do exactly what I'm trying to achieve but on those someone with more knowledge than me has configured the database!
I'm now stumped. I'm also no DBA but despite that it's been left to me to install the new 11g database on the 32-bit Windows server from scratch, so there are probably a couple of things I'm missing. It's probably something really obvious but I don't really know where to look now.
If anyone can give me any pointers at all, I'd be really grateful. This question is also duplicated in the Replication forum but hasn't had any replies as yet, so I'm reproducing it here in hope!
Thanks in advance,
Steve

Hi Steve,
You should have a look at metalink, Doc ID 1059547.1
If that does not help, there may be something else in Mater note ID 1353040.1
Best regards
Peter

Oracle 10gAS and 11g Database

Similar Messages

Maybe you are looking for