Oracle 10gDbConsole servvice not starting

Hi All Gurus,
I have a problem with my ORacle 10g. I had installed Oracle 10g (10.2.0.1) on my office PC and it was running fine. But yesterday our office moved from 1 floor to another in the same building. And my PC's IP address got changed, after this my Oracle 10g DB Console service is not strating, and when I try to start it manually it gives an error and say I should contact the software vendor.
Any ideas how can I correct my service so that I am again able to run my DBConsole.??? Thanks in advance.

This has been several times asked here in the forum. You may look for example here:
Re: EM Problem
~ Madrid

Similar Messages

Oracle Services Does Not Start

Hi,
I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle Agent is get started). When i chk the event viewer it says .. Could Not Start this service due to a logon failure..
Could anyone pls let me know the order in which the oracle services should start.
im sorry if my question confused you, bc'so im confused and stuck
Thanking u in advance
regards
Muraly

Hi,
you start all your oracle services except "OracleOraHome81ManagementServer". Specially try to start "OracleOraHome81DataGatherer", "OracleOraHome81TNSListener" and service you have created for your database.
Atul

Urgent --oracle service is not starting

hi everyone,
in my server one of oracle service is not starting.
"oracleorahome81httpserver" if i try to start this service its telling that " error 1067, the process terminated unexpectedly.
i checked in cmd prompt, by r3trans -d. its telling " error <0012>
.i need the command for mounting the database.
its urgent...,
regards
gopi

hi
good
go through this link,hope this would help you to solve your problem
http://orafaq.com/usenet/comp.databases.oracle.server/2004/09/22/1495.htm
thanks
mrutyun^

Oracle Service does not start after installation of Domain role

Hi all,
here is my setting:
Windows Server 2008 R2 64bit
ORACLE ONE 11g
I installed the database and it was working fine until I installed the domain controller role on this server.
Finally I needed to uninstall this role again and restarted the server several times during this process.
Now I can not access the database anymore. Listener starts, then stops.
database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
Thanks in advance...
Meden
Edited by: user10859969 on 13.01.2012 14:29

And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
So the best solution is CTRL-ALT-DEL and start all over again.
If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
Sybrand Bakker
Senior Oracle DBA

Oracle BPEL is not starting up for Weblogic 8.1.5

I have installed Weblogic 8.1.5 and Oracle BPEL for Weblogic in D:. When I tried to start the Oracle WL BPEL, I get the following exception.
<Dec 21, 2005 11:48:05 AM IST> <Notice> <Management> <BEA-140005> <Loading domain configuration from configuration repository at D:\OraBPELPM_2\user_projects\wlorabpel\.\config.xml.>
<Dec 21, 2005 11:48:06 AM IST> <Error> <Management> <BEA-140002> <InvocationTargetException occurred while setting attribute Properties on MBean wlorabpel:Name=BPELServerPool,Type=JDBCConnectionPool to value {user=system, password=manager}. Method: public void weblogic.management.mbeans.custom.JDBCConnectionPool.setProperties(java.util.Properties) throws javax.management.InvalidAttributeValueExcep
tion.
weblogic.security.internal.encryption.EncryptionServiceException: [Security:0902
19]Error decrypting Secret Key java.lang.SecurityException: sealing violation: p
ackage com.rsa.jsafe is sealed
at weblogic.security.internal.encryption.JSafeSecretKeyEncryptor.decrypt
SecretKey(JSafeSecretKeyEncryptor.java:120)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.<ini
t>(JSafeEncryptionServiceImpl.java:205)
at weblogic.security.internal.encryption.JSafeEncryptionServiceFactory.g
etEncryptionService(JSafeEncryptionServiceFactory.java:23)
at weblogic.security.internal.SerializedSystemIni.getEncryptionService(S
erializedSystemIni.java:230)
at weblogic.security.internal.SerializedSystemIni.getEncryptionService(S
erializedSystemIni.java:238)
at weblogic.management.EncryptionHelper.getCEncryptionService(EncryptionHelper.java:141)
at weblogic.management.EncryptionHelper.encryptString(EncryptionHelper.j
ava:81)
at weblogic.management.mbeans.custom.JDBCConnectionPool.setProperties(JD
BCConnectionPool.java:50)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeSetter(DynamicMBe
anImpl.java:1662)
at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBe
anImpl.java:1109)
at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(Conf
igurationMBeanImpl.java:369)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.j
ava:1358)
at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.j
ava:1333)
at weblogic.management.internal.RemoteMBeanServerImpl.private_setAttribu
te(RemoteMBeanServerImpl.java:431)
at weblogic.management.internal.RemoteMBeanServerImpl.setAttribute(Remot
eMBeanServerImpl.java:387)
at weblogic.management.internal.WLSParserHandler.parseMBeanAttributes(WL
SParserHandler.java:1189)
at weblogic.management.internal.WLSParserHandler.startElement(WLSParserH
andler.java:469)
at weblogic.management.internal.xml.ConfigurationRepositoryImpl.processE
lements(ConfigurationRepositoryImpl.java:1059)
at weblogic.management.internal.xml.ConfigurationRepositoryImpl.processE
lements(ConfigurationRepositoryImpl.java:1066)
at weblogic.management.internal.xml.ConfigurationRepositoryImpl.parseThr
ough(ConfigurationRepositoryImpl.java:468)
at weblogic.management.AdminServerAdmin.parse(AdminServerAdmin.java:733)
at weblogic.management.AdminServerAdmin.initializeRepository(AdminServer
Admin.java:865)
at weblogic.management.AdminServerAdmin.initialize(AdminServerAdmin.java
:267)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:770)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised: 'weblogic.management.configuration.ConfigurationException: [Se
curity:090219]Error decrypting Secret Key java.lang.SecurityException: sealing v
iolation: package com.rsa.jsafe is sealed - with nested exception:
[weblogic.security.internal.encryption.EncryptionServiceException: [Security:090
219]Error decrypting Secret Key java.lang.SecurityException: sealing violation:
package com.rsa.jsafe is sealed]'
Reason: weblogic.management.configuration.ConfigurationException: [Security:0902
19]Error decrypting Secret Key java.lang.SecurityException: sealing violation: p
ackage com.rsa.jsafe is sealed - with nested exception:
[weblogic.security.internal.encryption.EncryptionServiceException: [Security:090
219]Error decrypting Secret Key java.lang.SecurityException: sealing violation:
package com.rsa.jsafe is sealed]
D:\OraBPELPM_2\user_projects\wlorabpel>ENDLOCAL
D:\OraBPELPM_2\user_projects\wlorabpel>ENDLOCAL
D:\OraBPELPM_2\user_projects\wlorabpel>
Does anybody know why this exception is coming or Is the oracle bpel different for Weblogic 8.1.5 ?

Can you use WebLogic 8.1 SP4 ? BPEL has been certified with that version. We have been able to reproduce the issue and currently investigating the cause of it.

Oracle Management Server not starting up. says node manager is down!!!

Hi ALL,
We are trying to startup (OMS) Oracle Management Server but it's not starting up. it tries to connect to the node manager and says failed to connect to Node Manager as the node manager is not running.
OPMN also not running.
I have attached a snapshot so you can see.
PLEASE HELP
hi Again, below are the error reports
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at omkn-ms01.int.unisa.ac.za:7403.
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at java.net.PlainSocketImpl.socketConnect(Native Method)
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at java.net.Socket.connect(Socket.java:529)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:228)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Attempt to connect to nm failed. Trying to start it...
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>status of node manager:
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Not connected to Node Manager
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
2014-01-30 18:56:52,363 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>   at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:172)
regards,
Ambrose.

I assumethe node manager is not running on Exadata though you have posted in the Exadata forum !
how are you starting it. Are you using the gcstartup script within init.d ?
Thanks

Oracle CSS does not start up

Hi guys,
After installing Oracle 10g on Solaris 9, I could not get the database to start up on the web browser. I was wondering is the problem is due to the error below. If yes, what steps should I take to remedy it?
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'other'..
Operation successful.
Oracle Cluster Registry for cluster has been initialized
Usage: /etc/init.d/init.cssd start
Usage: /etc/init.d/init.cssd start
cat: cannot open /css/admin/inittab_local
Adding to inittab
/export/home/app/oracle/product/10.1.0/db_1/bin/localconfig:
/usr/bin/cp: not found
Sep 6 16:50:06 unknown root: [ID 702911 user.alert] (Oracle CSSD will
be run out of init)
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS
service is started
Thanx!

Thanks for replying. My database does not work with ASM.
I've reinstalled Oracle10g on Solaris as I believed that I made some errors for the previous versions.
Now, for this current Oracle, I can access the database using SQL and dbconsole service to start the EM. However I can't access the EM's database through the web browser after the first reboot.
i am able to use the EM using the path
http://unknown:5500/em
Note: My hostname is unknown as i had used DHCP during installation.
But once after reboot, the following error msgs appear at the startup and i could not access the EM:
Oracle CSSD being stopped
Shutting down CRS daemon
Shutting down EVM daemon
Failure 3 at CSS context initialization
Oracle CSSD will be run out of init
My qn is if it is my unknown hostname that cause the problem? Or is there any other soln pertaining to the error msg.

Oracle Management Server Not starting

Hi all,
I created the OMS server, but it is not getting started. I am on Linux Fedora2 with Oracle 9iR2. When I give
oemctl start oms
it says that OMS startup timed out.
Please do help
The following are the output from the oms.nohup file
Starting the management server at Wed Feb 9 15:52:16 IST 2005
OEMCTL for Linux: Version 9.2.0.1.0 Production
Copyright (c) 1998, 2002, Oracle Corporation. All rights reserved.
Starting the Oracle Management Server...
Error starting Oracle Management Server. ORBSingleton: access deniedjava.lang.SecurityException: ORBSingleton: access denied
     at com.sun.corba.se.internal.corba.ORBSingleton.connect(ORBSingleton.java:309)
     at oracle.sysman.vxn.VxnNamingContext.<init>(VxnNamingContext.java:285)
     at oracle.sysman.vxn.VxnNamingContext.getNewContext(VxnNamingContext.java:222)
     at oracle.sysman.vxn.VxnNamingService.getInitialContext(VxnNamingService.java:1072)
     at oracle.sysman.vxn.VxnNamingService.enableBootstrap(VxnNamingService.java:1080)
     at oracle.sysman.vxn.VxnNamingService.init(VxnNamingService.java:238)
     at oracle.sysman.vxn.VxnNamingService.getNamingService(VxnNamingService.java:103)
     at oracle.sysman.vxn.VxnNamingService.getNamingService(VxnNamingService.java:112)
     at oracle.sysman.vxa.VxaAppServer.initServer(VxaAppServer.java:3417)
     at oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:3048)
OMS exited on Wed Feb 9 15:52:18 IST 2005 with return value 56
Could not start management server. Initialization failure
\nManagement server startup failed. Check the file /oracle/ora9/product/9.2.0.1.0/sysman/log/oms.nohup for details

I assumethe node manager is not running on Exadata though you have posted in the Exadata forum !
how are you starting it. Are you using the gcstartup script within init.d ?
Thanks

Oracle Listener service not starting.

Hi,
Windows 2003 Oracle 10.2. and ECC 6.0
TNS Listener service is not starting and giving below Error
"The OracleTST102TNSListener service on Local Computer started and then stoped. Some services stop automatically if they have no work to do, for example, the performance logs and Alerts service.
Please help me.
Thanks

Thanks warren
This is not a new installation. I was running SGEN Tcode. I stopped the transaction and wanted to start it again, it gave an ABAP DUMP error. After that i had restarted the Server at OS level. From then onwards the TNS Listener service was not starting.
But the problem is resolved. The problem was with the IP Address. It was changed and the entry was not present in the Host file. So i have made an entry in the hostfile and started the TNS Listener service, it worked.

Oracle Media Recovery Not Started

Hi,
Need help
I've just performed system copy in HP-UX & Oracle as database using backup restore method.
I'm using online backup for this system copy. Control file has been created successfully. Now I'm trying to start the media recover using below cmd
"recover database using backup controlfile until cancel"
After applying this command system is not starting the media recovery. From alert log file I can see the msg Media Recovery Start but oracle is not giving any further message, it is stuck on the below screen.
aigas:oraaeq 2> sqlplus /nolog
SQL*Plus: Release 10.2.0.2.0 - Production on Thu May 13 08:42:39 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> conn /as sysdba
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 5284823040 bytes
Fixed Size                  2051424 bytes
Variable Size            2650800800 bytes
Database Buffers         2617245696 bytes
Redo Buffers               14725120 bytes
Database mounted.
SQL>
SQL> recover database using backup controlfile until cancel;
output of tail -f alert.log file **********
parallel_threads_per_cpu = 1
optimizer_index_cost_adj = 20
query_rewrite_enabled    = FALSE
optimpeek_user_binds   = FALSE
pga_aggregate_target     = 3469486325
workarea_size_policy     = AUTO
statistics_level         = typical
optimizermjc_enabled   = FALSE
bloomfilter_enabled    = FALSE
PMON started with pid=2, OS id=5447
PSP0 started with pid=3, OS id=5449
MMAN started with pid=4, OS id=5451
DBW0 started with pid=5, OS id=5453
DBW1 started with pid=6, OS id=5455
LGWR started with pid=7, OS id=5457
CKPT started with pid=8, OS id=5459
SMON started with pid=9, OS id=5461
RECO started with pid=10, OS id=5463
CJQ0 started with pid=11, OS id=5465
MMON started with pid=12, OS id=5467
MMNL started with pid=13, OS id=5469
Thu May 13 09:17:26 2010
ALTER DATABASE   MOUNT
Thu May 13 09:17:30 2010
Setting recovery target incarnation to 1
Thu May 13 09:17:30 2010
Successful mount of redo thread 1, with mount id 680883430
Thu May 13 09:17:30 2010
Database mounted in Exclusive Mode
Completed: ALTER DATABASE   MOUNT
Thu May 13 09:18:19 2010
ALTER DATABASE RECOVER database using backup controlfile
Thu May 13 09:18:19 2010
Media Recovery Start
We have mounted two nfs file system which are part of oracle file system
Regards,
Neehir Bhatt

Hi Neehir,
How did you create the control file ?
Did you use start the DB with source SID and generated a control file trace and then excutede the control file trace sql with the SID change in ordrer to create actual control files with ORACLE_SID reset to actual DBSID. .
Also i use:
recover database until cancel using backup controlfile;
and not :
"recover database using backup controlfile until cancel"
Not sure though if that should make difference because if yours was erroneous oracle should have let you known.
What message comes when you try
alter database open
Regards.
Ruchit.

Oracle Weblogic 12c not starting

My weblogic service which is a stand alone install, no clusters will not start up.
The error is --> and only reports service.log only no other logs
weblogic.management.ManagementException: [Management:141266]Parsing failure in config.xml: The following failures occurred:
-- [SNMP:320948]The SNMPTrapDestinationMBean TrapDestination-0 has a higher SecurityLevel authNoPriv than the SNMPAgents SecurityLevel {2}.
     at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:127)
     at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
     at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
     at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
     at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:883)
     at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:570)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
     at weblogic.Server.main(Server.java:74)
Caused by: weblogic.descriptor.DescriptorValidateException: The following failures occurred:
-- [SNMP:320948]The SNMPTrapDestinationMBean TrapDestination-0 has a higher SecurityLevel authNoPriv than the SNMPAgents SecurityLevel {2}.
     at weblogic.descriptor.internal.AbstractDescriptorBeanHelper.validateSubTree(AbstractDescriptorBeanHelper.java:113)
     at weblogic.descriptor.internal.DescriptorImpl.validate(DescriptorImpl.java:449)
     at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:267)
     at weblogic.management.provider.internal.DescriptorManagerHelper.loadDescriptor(DescriptorManagerHelper.java:77)
     at weblogic.management.provider.internal.RuntimeAccessImpl$IOHelperImpl.parseXML(RuntimeAccessImpl.java:690)
     at weblogic.management.provider.internal.RuntimeAccessImpl.parseNewStyleConfig(RuntimeAccessImpl.java:270)
     at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:115)
     ... 7 more
In the events logs
Certificate enrollment for service account that runs the weblogic reports failed to enroll for a User_1 certificate with request ID 505056 from xxxx.domain.com\xxxx-CORPORATE-CA-1 (The EMail name is unavailable and cannot be added to the Subject or Subject Alternate name. 0x80094812 (-2146875374)).
Do you think the two area related and it is to deal with Cerificates?
Thanks

Thanks warren
This is not a new installation. I was running SGEN Tcode. I stopped the transaction and wanted to start it again, it gave an ABAP DUMP error. After that i had restarted the Server at OS level. From then onwards the TNS Listener service was not starting.
But the problem is resolved. The problem was with the IP Address. It was changed and the entry was not present in the Host file. So i have made an entry in the hostfile and started the TNS Listener service, it worked.

Oracle database does not start timezone mismatch

Hi
I am new on oracle database. My server has restart and now when I try to start oracle database I get this error can anyone help to come out this error.
oracle@host [~]# /home/u01/app/oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
TZ set to US/Michigan
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://server:1158/em/console/aboutApplication
Timezone mismatch: The agentTZRegion value (US/Michigan) in
/home/u01/app/oracle/oracle/product/10.2.0/db_1/database/sysman/config/emd.properties
does not match the current environment TZ setting(US/Michigan).
The dbconsole cannot run with this mismatch.
If US/Michigan is the correct timezone, set your timezone environment variable to US/Michigan and repeat the 'emctl start dbconsole' operation.
If US/Michigan is not the correct timezone, make sure that the timezone in your environment is correct, and then run the following command in your local Oracle Home: 'emctl resetTZ agent'
The output of this command will include detailed instructions to follow, to correct the mismatch.
Thanks in advance
Edited by: user6550464 on Mar 29, 2009 11:46 PM

And now You see the reason for error message.
emctl thinks that time zone is US/Michigan (its from emd.properties file)
but on linux timezone is set to Asia/Calcutta
Yoiu should understand which one timezone is correct. If it's US - then talk with server sysadmin, he will set correct one timezone on linux.
If correct one is on linux - then follow metalink note how to change timezone for agent.
If none of them are correct, then You will have to follow both steps.

Oracle Universal Installer not starting, failing on pre-requisites

--[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
/data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
--[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
Debug1
encoding = UTF-8
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
All installer requirements met.
Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
The tmp seems to have enough space...
bash-3.2$ df -kh
Filesystem size used avail capacity Mounted on
/dev/dsk/c3t201500A0B826A22Cd4s0
9.8G 5.2G 4.6G 54% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 12G 1.7M 12G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
/dev/dsk/c3t201500A0B826A22Cd4s3
9.8G 409M 9.3G 5% /var
swap 12G 1.0M 12G 1% /tmp
swap 12G 80K 12G 1% /var/run
/dev/dsk/c3t201500A0B826A22Cd4s4
9.8G 4.6G 5.2G 47% /apps
/dev/dsk/c3t201500A0B826A22Cd0s5
128G 73G 53G 58% /data01
/dev/dsk/c3t201500A0B826A22Cd1s6
262G 13G 247G 5% /data02/FMSinvoice
Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
Thanks

Thanks for the replies...
FYI.
I have cloned an Oracle 9i database on a DR test server.
Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
I have implemented these suggestions.
Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
This worked and passed through.
Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
The error I'm getting is below
bash-3.2$ pwd
/data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
Starting Oracle Universal Installer ...
Checking requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10.
Actual 5.10 Passed
Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
Checking swap space: must be greater than 1536 MB.
Actual 14791MB Passed
Checking Temp space: must be greater than 150 MB.
Actual 252715 MB Passed
All requirements met.
Checking if CPU speed is above 250 MHz.
Actual 1200 MHz Passed
Checking monitor: must be configured to display at least 256 colors
^C Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
I am running humingbird Exceed, and have also set the DISPLAY to my screen.
FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
However I would prbably still get the java error. Should this not be resolved using Exceed though?

Oracle 9i database not starting

Dear all,
need ur help. i have installed oracle9i on wndows xp. then i stoped all the services for 9i. n i installed oracle 10g also.
My problem is that bothy database servies are their and they are automatic.
10 g Database is starting automatically. but 9i database instance is not opeing automatically.
i tried STARTTYPE the opetion of oradim also but its not working.
tell me how to start the 9i database automatically.
regds
Ashish

most likely while installation you might have given a different port no.As a result oracle has ultimately landed up with having more than one listener.And some times I have seen after installation the previous listener does not get started.So I would like to you to check your listener.
One more point while 2nd installtion you might have changed your oracle home.so while trying to connect to prev instance try using sqlplus from previous oracle_home\bin\.

Oracle Enterprise manager not starting

I have installed Oracle Enterprise Manager on my virtual machine running Oracle Linux 5.8. I edited the virtual machine settings to contain 2 CPU cores, 8GB RAM post installation of OEM owing to slow response times from the server. This was done as per the pre-requisite recommendation from Oracle Installation guide. Also, prior to installation of the Oracle DB, I had the user group as dba instead of oinstall. I have now associated the oracle user to the oinstall group instead of dba. Now, I have powered on the virtual machine and started the database and the listener. Now when I try to launch the OMS service, I am not able to get the Management server up and running. The logs show the error on "PolicyStoreContainerNotReadyException" and says 'Failed to search audit definition for component JPS. Reason: oracle.secutiry.jps.service.policystore.PolicyStoreContainerNotReadyException. Kindly let me know what should I do to get the OMS up and running.

Hi,
2010-06-01 15:17:10 Thread-5704 ERROR http: 1728: Unable to initialize ssl connection with server, aborting connection attempt
2010-06-01 15:17:12 Thread-7368 ERROR ssl: nzos_Handshake failed, ret=29024
2010-06-01 15:17:12 Thread-7368 ERROR http: 1740: Unable to initialize ssl connection with server, aborting connection attempt
2010-06-01 15:17:19 Thread-2896 ERROR ssl: nzos_Handshake failed, ret=29024
2010-06-01 15:17:19 Thread-2896 ERROR http: 1740: Unable to initialize ssl connection with server, aborting connection attempt
I am getting above error message in "\\Oracle10g\d$\oracle\product\10.2.0\db_1\oracle10g.olaminfo_SIPDB\sysman\log\emdctl.trc" file
I have not Changed IP Address Or Host Name in the Server.
Please Advice...
Thanks
Shan

Oracle 10gDbConsole servvice not starting

Similar Messages

Maybe you are looking for