Oracle 10gR2 Grid Management Agents installation issues

I have downloaded the Grid Management Agent from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of host server i am attempting to install the agent on is AIX5.3
I unzipped the following file
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the installer and it all seemed to work ok
I have checked the dbconsole is running,EMCTL STATUS DBCONSOLE
I have checked the agent is running EMCTL STATUS AGENT
I have checked the listener is running LSNRCTL STATUS
I have checked the database is up by CONNECT / AS SYSDBA
I can conect to the http://myserver:1158/em
The local enterprise manager works fine however as i say the server does not appear in my Grid Control console.
I have restarted al the afforementioned listeners, agents etc.
Can anyone give me a pointer as to why after what would appear to be a succesfull install the serevr does not appear in Grid Control console.

yingkuan again thanks for the reply
I have read the installation readme and it says i have these installation methods
1 - Methods for mass deployment
2 - Using Oracle Universal Installer (OUI) to install agent
3 - silent installation
4 - NFS Mounted agent installation
I am running the runInstaller method (2) from the list above
Like i say i basically downloaded the following file from Oracle Downloads:
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I FTP'd the file from my PC to the server i wish to be the agent.
I then ran the runInstaller from AIX_Grid_Control_agent_download_10_2_0_3_0/aix/agent/install.
However at no point was i asked to insert the OMS server or any other details.
I have read a couple of different readme files and followed what i believe to be the installation instructions. Could you or anyone else possibly throw any light on what i am doing wrong.
again any assitance greatly appreciated

Similar Messages

Installing a Grid Management agent on AIX 5.3

I have downloaded the Grid Management Agent 10.2.0.3.0 for Oracle 10G from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of the host server i am attempting to install the agent on is AIX5.3
I downloaded and unzipped the following file AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the i./runInstaller from the aix/agent directory no errors reported however when I did this it did not show me a OUI page as I expected where I could insert Grid hostname etc
I assumed after running the installer I would then see the target host appear in my grid control server but no servernmae/agenst/db appears in grid control for this host
I have read a plethora of help/installation files on this subject matter and there seems to be a variety of different ways users are saying to install.
Some WebPages/help files say simply run the installer from the root directory of the Enterprise Manager DVD others give a completely different way of installing.
Can anyone who has successfully loaded on a Grid Management Agent give me any pointers as to:
1 – Why my installation appears to have failed
2 – A stepe by step guide on what users need to be added if any, what account I should install under etc

sorry it has taken me time to post back.
Below is the information you requested
/etc/oraInst.loc = 12th May
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
/u01/app/oracle/product/10.2.0/oraInst.loc = 12th May
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
/u01/app/oracle/product/10.2.0/oraInst.loc = 12th May
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
/u01/app/oracle/product/10.2.0/TESTSERVER_DATABASE/oraInst.loc = 12th May
file contains
inventory_loc=/u01/app/oracle/oraInventory
inst_group=oinstall
Once again thanks for the assistance

A problem for grid control agent installation.

Hi, All:
I am installing EM grid control agent installation in wanted server...
after agent installation and excuting root.sh, OUI start to run automatically Agent Configuration Assistant... then got an error, the reason for error from the log is :
Requesting an Oracle Wallet and Agent Key from the OMS... Failed.
Invalid Agent Registration Password.
The Agent has not been secured.
that means I put wrong agent registration password,
so how can I fix this in the mid way?
thanks a lot in advance.

I tried
emctl secure agent
when prompt for password:
(just type enter, leave it empty)
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Stopping agent...
seems like that process is never ending....
then I typed CTL+C
..............................Failed to stop agent.

Which ports are used by oracle datbase and management agent other than 1521

Hi,
Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
Regards,
Rjiv.

Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

Oracle PeopleSoft Enterprise Manager Plugin Installation on oem grid control 12c facing error

Hi Friends,
I am planning to monitor Peoplesoft 8.52 HRMS application through oem 12c grid control. First I have installed 12c grid control successfully. Followed by I am installing the Oracle PeopleSoft Enterprise Manager Plugin in 12c oem repository containing 11g database. I am facing configuration assistant error message as below
OUI-25031 some of configuration assistance failed.
Configuration assistant "PeopleSoft Environment Management Repository Plug-in" failed
The "/u01/oracle/cloudcontrol/middleware/oms/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Please assist me how shall I proceed further...
Regards,
Rajesh Pachiyappan

Hi,
I just came across the same problem.
In my case, I hit this issue while trying to reinstall Oracle EMCC 12g.
Since previous installation failed, I decided to start from the beginning again but I am now hitting this.
Before trying to reinstal, I dropped SYSMAN and a few other users created on the provided DB.
Did you solve this issue?
I believe I may have not "clean up" the database properly. Which would be the right way of wiping out the DB without actually rebuild it again?
Thanks
Angel

OEM 10.2 Grid Control Management Agent Installation

I have installed a new OEM Management agent on a remote host but I now cannot connect the remote host agent installation to the central OMS as there is a very strict customer firewall in between which only allows Ports 1159 and 3872 on https. No http.
Is there any way that i can get the agent and central OMS connected using https ?
Any help would be greatly appreciated.

Hi Kam,
I made some minor changes to the emd.properties file and ran the 'secure' again...
then I got the following response on the emctl secure agent. (This was different).
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Agent successfully stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Done.
Requesting an Oracle Wallet and Agent Key from the OMS... Done.
Check if HTTPS Upload URL is accessible from the agent... Done.
Configuring Agent for HTTPS in CENTRAL_AGENT mode... Done.
EMD_URL set in /home/ORACLE/product/Agent/agent10g/sysman/config/emd.properties
Securing agent... Successful.
Agent successfully restarted... Done.
However when I try and get a heartbeat between the agent and the OMS using emctl upload agent..i get the following error.
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
MaYbe the OMS hostname is being blocked on the firewall ?

RHEL4U4 EM64T Grid Control agent install issue

I've installed a 2 node Oracle 10G R2 RAC on RHEL4 U4 EM64T and it is working fine on Dell PE2850 servers. But I couldn't get the grid control agent installed on these RHEL4U4 EM64T PE2850 servers. The OMS server is running 32 bit Oracle 10g R2 on RHEL4. The issue is with the OMA (agent) install on EM64T and I've tried several different options (local install and push from the OMS server). I end up with the following error. Any feedback is appreciated. Thanks.
Raj
<<installActions2006-12-07_11-22-39AM.log>>
This is error we got from both the install on the local node and tried a push from the OMS server as well.
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /opt/oracle/product/10.2.0/agent10g/bin/genclntsh
INFO: /usr/bin/ld: skipping incompatible /opt/oracle/product/10.2.0/agent10g/lib/libxml10.a when searching for -lxml10
/usr/bin/ld: cannot find -lxml10
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/oracle/product/10.2.0/agent10g/network/lib/ins_net_client.mk'. See '/opt/oracle/oraInventory/logs/installActions2006-12-07_11-22-39AM.log' for details.
Exception Severity: 1

Hi,
Did you run cvu to check if all OS Patches are installed ??
Best Regards,
Paulo.

Audit Vault Agent Installation issue

Hi All,
I have installed the following things
1) Audit Vault Server (10.2.2.0.1) on a Windows 2003 Server
2) I completed the post-installation tasks
3) I am trying to install Audit Vault agent (10.2.2) on HPUX (11.11) machine.
I start the AV Agent runInstaller, and fill the details like AVAgent name, Username, connect String etc, then click on next , it throws the following error:
"error1: the AV server is expecting an agent with the given name to be installed on another machine"
I am able to ping from Windows to HP machine and Vice versa (By IP Address and Hostname).
Can anyone tell me where i am going wrong and how to solve it.
Please mail to my email address ([email protected])
Thanks & Regards,
Rakesh

Hi,
The details of the installation done so far:
1) I have installed "Oracle Audit Vault Server (10.2.2)" on a Windows 2003 machine providing the following details
a) Audit vault Name
b) Audit Vault Home
c) Audit Vault Administrator
d) Administrator Password
e) Audit Vault Auditor
f) Ausitor Password
g) Database Vault Owner and Manager
h) Created a Audit Vault Agent user and added the user to the udit Vault server using AVCA.
2)I invoke the "Audit Vault Agent" Installer from a HP-UX machine and provide details viz.,
a) Audit vault Agent Name (Same name when i executed the AVCA command above)
b) Aduit Vault Agent Home
c) Agent Username
d) Agent Password
e) Audit Vault Server Connect String (Provide the Database details as mentioned in Audit Vault Server (localhost:port:servicename)
and when i click on the next button it throws me the following error:
"error1: the AV server is expecting an agent with the given name to be installed on another machine".
Hope this gives you a better idea. Waiting for your reply.
Thanks & Regards,
Rakesh

SCOM Agent installation Issue

Dear all,
We have SCOM 2012 r2 , when we install agent through discovery . We got the below error
The Operations Manager Server cannot process the install/uninstall request for computer xxxxx due to failure of operating system version verification.
Operation: Agent Install
Install account: XXXXX
Error Code: 80070035
Error Description: The network path was not found.
Any idea what would be the issue here ?
Gone through some forum , but no luck
http://www.scapaot.de/blog/?p=291
Thanks,
74KMS

Hi
Kevin Holman has a great blog on troubleshooting agent install issues here:
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
The error you state has "Manual Agent Install" as the "fix".
Could you confirm:
1. The agent is in the same domain as the SCOM Management Server?
2. Can you do an NSLookup from the Management Server to the agent FQDN?
3. If you try and install the agent manually, do you get an error or does it complete?
Cheers
Graham

Oracle Application R12.1.1 installation issue

During installation of Oracle Application R12.1.1 installation I face this error,
Windows cannot find '.\jre\NT\1.5.0\bin\java'. Make sure you typed the name correctly, and then try again.
plz anyone idea to resolve this

<?xml version="1.0"?>
<oa_context version="$Revision: 120.5 $">
<oa_context_name oa_var="s_contextname">config.txt</oa_context_name>
<oa_context_serial oa_var="s_contextserial">0</oa_context_serial>
<oa_context_type oa_var="s_contexttype">Config File</oa_context_type>
<oa_context_file_loc oa_var="s_contextfile">e:\oracle\PROD\apps\apps_st\appl\admin\asad-b\conf_PROD.txt</oa_context_file_loc>
<ini_file>
[GENERAL]
CONFIGURED_ENVS=PROD
CONFIGURATION_FORMAT=12.0.0
ACTION_TYPE=INSTALLING
NUMBER_OF_HOSTS=2
HOSTNAMES={Server0_asad-b,Server1_asad-b}
[Server0_asad-b]
s_contextname=PROD_asad-b
s_dbSid=PROD
s_dbport=1521
s_platform=Windows NT
s_base_lang=US
s_domainname=aa
s_isDB=YES
s_isAdmin=NO
s_isForms=NO
s_isConc=NO
s_isWeb=NO
s_port_pool=0
s_dbSidLower=prod
s_dbuser=oracle
s_apps_version=12.1.1
s_dbGlnam=PROD
s_dbseed=Fresh Install
s_dbtype=PROD
s_dbcset=US7ASCII
s_base=e:\oracle\PROD
s_db_oh=e:\oracle\PROD\db\tech_st\11.1.0
s_dbhome1=e:\oracle\PROD\db\apps_st\data
s_dbhome2=e:\oracle\PROD\db\apps_st\data
s_dbhome3=e:\oracle\PROD\db\apps_st\data
s_dbhome4=e:\oracle\PROD\db\apps_st\data
s_dbhost=asad-b
s_bits=32
s_db_ons_localport=6300
s_db_ons_remoteport=6400
s_cmanport=1521
[Server1_asad-b]
s_contextname=PROD_asad-b
s_dbSid=PROD
s_dbport=1521
s_platform=Windows NT
s_base_lang=US
s_env_langs=US - American_English
s_defterr=AMERICA
s_domainname=aa
s_dbdomain=aa
s_isDB=NO
s_isAdmin=YES
s_isForms=YES
s_isConc=YES
s_isWeb=YES
s_port_pool=0
s_formsfndtop=e:\oracle\PROD\apps\apps_st\appl\fnd\12.0.0
s_dbSidLower=prod
s_apps_version=12.1.1
s_base=e:\oracle\PROD
s_inst_base=e:\oracle\PROD\inst
s_config_home=e:\oracle\PROD\inst\apps\PROD_asad-b
s_at=e:\oracle\PROD\apps\apps_st\appl
s_at2=e:\oracle\PROD\apps\apps_st\appl
s_at3=e:\oracle\PROD\apps\apps_st\appl
s_at4=e:\oracle\PROD\apps\apps_st\appl
s_tools_oh=e:\oracle\PROD\apps\tech_st\10.1.2
s_weboh_oh=e:\oracle\PROD\apps\tech_st\10.1.3
s_com=e:\oracle\PROD\apps\apps_st\comn
s_javatop=e:\oracle\PROD\apps\apps_st\comn\java\classes
s_pt=e:\oracle\PROD\inst\apps\PROD_asad-b\portal
s_temp=e:\oracle\PROD\inst\apps\PROD_asad-b\temp
s_at_cset=US7ASCII
s_iana_cset=US-ASCII
s_MSDEVdir=C:\MVS\VC
s_MKSdir=C:\cygwin
s_dbhost=asad-b
s_admhost=asad-b
s_formshost=asad-b
s_cphost=asad-b
s_webhost=asad-b
s_root_status=enabled
s_web_entry_status=enabled
s_web_applications_status=enabled
s_batch_status=enabled
s_other_service_group_status=disabled
s_apps_jdbc_connect_descriptor=null
s_rpcport=1626
s_webssl_port=4443
s_ons_localport=6100
s_ons_remoteport=6200
s_ons_requestport=6500
s_webport=8000
s_active_webport=8000
s_formsport=9000
s_metdataport=9100
s_metreqport=9200
s_jtfuf_port=9300
s_mwaPortNo=10200-10205
s_mwaTelnetPortNo=10200,10202,10204
s_mwaDispatcherPort=10800
s_java_object_cache_port=12345
s_oacore_jms_portrange=23000-23004
s_forms_jms_portrange=23500-23504
s_home_jms_portrange=24000-24004
s_oafm_jms_portrange=24500-24504
s_oacore_ajp_portrange=21500-21504
s_forms_ajp_portrange=22000-22004
s_home_ajp_portrange=22500-22504
s_oafm_ajp_portrange=25000-25004
s_oacore_rmi_portrange=20000-20004
s_forms_rmi_portrange=20500-20504
s_home_rmi_portrange=21000-21004
s_oafm_rmi_portrange=25500-25504
</ini_file>
<config_section name="GENERAL">
<config_pair oa_var="CONFIGURED_ENVS">PROD</config_pair>
<config_pair oa_var="CONFIGURATION_FORMAT">12.0.0</config_pair>
<config_pair oa_var="ACTION_TYPE">INSTALLING</config_pair>
<config_pair oa_var="NUMBER_OF_HOSTS">2</config_pair>
<config_pair oa_var="HOSTNAMES">{Server0_asad-b,Server1_asad-b}</config_pair>
</config_section>
<config_section name="Server0_asad-b">
<config_pair oa_var="s_contextname">PROD_asad-b</config_pair>
<config_pair oa_var="s_dbSid">PROD</config_pair>
<config_pair oa_var="s_dbport">1521</config_pair>
<config_pair oa_var="s_platform">Windows NT</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_domainname">aa</config_pair>
<config_pair oa_var="s_isDB">YES</config_pair>
<config_pair oa_var="s_isAdmin">NO</config_pair>
<config_pair oa_var="s_isForms">NO</config_pair>
<config_pair oa_var="s_isConc">NO</config_pair>
<config_pair oa_var="s_isWeb">NO</config_pair>
<config_pair oa_var="s_port_pool">0</config_pair>
<config_pair oa_var="s_dbSidLower">prod</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_dbGlnam">PROD</config_pair>
<config_pair oa_var="s_dbseed">Fresh Install</config_pair>
<config_pair oa_var="s_dbtype">PROD</config_pair>
<config_pair oa_var="s_dbcset">US7ASCII</config_pair>
<config_pair oa_var="s_base">e:\oracle\PROD</config_pair>
<config_pair oa_var="s_db_oh">e:\oracle\PROD\db\tech_st\11.1.0</config_pair>
<config_pair oa_var="s_dbhome1">e:\oracle\PROD\db\apps_st\data</config_pair>
<config_pair oa_var="s_dbhome2">e:\oracle\PROD\db\apps_st\data</config_pair>
<config_pair oa_var="s_dbhome3">e:\oracle\PROD\db\apps_st\data</config_pair>
<config_pair oa_var="s_dbhome4">e:\oracle\PROD\db\apps_st\data</config_pair>
<config_pair oa_var="s_dbhost">asad-b</config_pair>
<config_pair oa_var="s_bits">32</config_pair>
<config_pair oa_var="s_db_ons_localport">6300</config_pair>
<config_pair oa_var="s_db_ons_remoteport">6400</config_pair>
<config_pair oa_var="s_cmanport">1521</config_pair>
</config_section>
<config_section name="Server1_asad-b">
<config_pair oa_var="s_contextname">PROD_asad-b</config_pair>
<config_pair oa_var="s_dbSid">PROD</config_pair>
<config_pair oa_var="s_dbport">1521</config_pair>
<config_pair oa_var="s_platform">Windows NT</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">US - American_English</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">aa</config_pair>
<config_pair oa_var="s_dbdomain">aa</config_pair>
<config_pair oa_var="s_isDB">NO</config_pair>
<config_pair oa_var="s_isAdmin">YES</config_pair>
<config_pair oa_var="s_isForms">YES</config_pair>
<config_pair oa_var="s_isConc">YES</config_pair>
<config_pair oa_var="s_isWeb">YES</config_pair>
<config_pair oa_var="s_port_pool">0</config_pair>
<config_pair oa_var="s_formsfndtop">e:\oracle\PROD\apps\apps_st\appl\fnd\12.0.0</config_pair>
<config_pair oa_var="s_dbSidLower">prod</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_base">e:\oracle\PROD</config_pair>
<config_pair oa_var="s_inst_base">e:\oracle\PROD\inst</config_pair>
<config_pair oa_var="s_config_home">e:\oracle\PROD\inst\apps\PROD_asad-b</config_pair>
<config_pair oa_var="s_at">e:\oracle\PROD\apps\apps_st\appl</config_pair>
<config_pair oa_var="s_at2">e:\oracle\PROD\apps\apps_st\appl</config_pair>
<config_pair oa_var="s_at3">e:\oracle\PROD\apps\apps_st\appl</config_pair>
<config_pair oa_var="s_at4">e:\oracle\PROD\apps\apps_st\appl</config_pair>
<config_pair oa_var="s_tools_oh">e:\oracle\PROD\apps\tech_st\10.1.2</config_pair>
<config_pair oa_var="s_weboh_oh">e:\oracle\PROD\apps\tech_st\10.1.3</config_pair>
<config_pair oa_var="s_com">e:\oracle\PROD\apps\apps_st\comn</config_pair>
<config_pair oa_var="s_javatop">e:\oracle\PROD\apps\apps_st\comn\java\classes</config_pair>
<config_pair oa_var="s_pt">e:\oracle\PROD\inst\apps\PROD_asad-b\portal</config_pair>
<config_pair oa_var="s_temp">e:\oracle\PROD\inst\apps\PROD_asad-b\temp</config_pair>
<config_pair oa_var="s_at_cset">US7ASCII</config_pair>
<config_pair oa_var="s_iana_cset">US-ASCII</config_pair>
<config_pair oa_var="s_MSDEVdir">C:\MVS\VC</config_pair>
<config_pair oa_var="s_MKSdir">C:\cygwin</config_pair>
<config_pair oa_var="s_dbhost">asad-b</config_pair>
<config_pair oa_var="s_admhost">asad-b</config_pair>
<config_pair oa_var="s_formshost">asad-b</config_pair>
<config_pair oa_var="s_cphost">asad-b</config_pair>
<config_pair oa_var="s_webhost">asad-b</config_pair>
<config_pair oa_var="s_root_status">enabled</config_pair>
<config_pair oa_var="s_web_entry_status">enabled</config_pair>
<config_pair oa_var="s_web_applications_status">enabled</config_pair>
<config_pair oa_var="s_batch_status">enabled</config_pair>
<config_pair oa_var="s_other_service_group_status">disabled</config_pair>
<config_pair oa_var="s_apps_jdbc_connect_descriptor">null</config_pair>
<config_pair oa_var="s_rpcport">1626</config_pair>
<config_pair oa_var="s_webssl_port">4443</config_pair>
<config_pair oa_var="s_ons_localport">6100</config_pair>
<config_pair oa_var="s_ons_remoteport">6200</config_pair>
<config_pair oa_var="s_ons_requestport">6500</config_pair>
<config_pair oa_var="s_webport">8000</config_pair>
<config_pair oa_var="s_active_webport">8000</config_pair>
<config_pair oa_var="s_formsport">9000</config_pair>
<config_pair oa_var="s_metdataport">9100</config_pair>
<config_pair oa_var="s_metreqport">9200</config_pair>
<config_pair oa_var="s_jtfuf_port">9300</config_pair>
<config_pair oa_var="s_mwaPortNo">10200-10205</config_pair>
<config_pair oa_var="s_mwaTelnetPortNo">10200,10202,10204</config_pair>
<config_pair oa_var="s_mwaDispatcherPort">10800</config_pair>
<config_pair oa_var="s_java_object_cache_port">12345</config_pair>
<config_pair oa_var="s_oacore_jms_portrange">23000-23004</config_pair>
<config_pair oa_var="s_forms_jms_portrange">23500-23504</config_pair>
<config_pair oa_var="s_home_jms_portrange">24000-24004</config_pair>
<config_pair oa_var="s_oafm_jms_portrange">24500-24504</config_pair>
<config_pair oa_var="s_oacore_ajp_portrange">21500-21504</config_pair>
<config_pair oa_var="s_forms_ajp_portrange">22000-22004</config_pair>
<config_pair oa_var="s_home_ajp_portrange">22500-22504</config_pair>
<config_pair oa_var="s_oafm_ajp_portrange">25000-25004</config_pair>
<config_pair oa_var="s_oacore_rmi_portrange">20000-20004</config_pair>
<config_pair oa_var="s_forms_rmi_portrange">20500-20504</config_pair>
<config_pair oa_var="s_home_rmi_portrange">21000-21004</config_pair>
<config_pair oa_var="s_oafm_rmi_portrange">25500-25504</config_pair>
</config_section>
</oa_context>
I also problem with system utilities. cygwin and domain name

Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86

Hi All,
I'm hoping somebody can shed some light on this issue.
I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
RESPONSE FILE:
## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values.                                   ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=
# Inventory location.
INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
# Specify the languages in which the components will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
SELECTED_LANGUAGES=en,en_GB
# Complete path of the Oracle Home
ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
# Complete path of the Oracle Base.
ORACLE_BASE=C:\Oracle
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
# The following choices are available. The value should contain
# only one of these choices.
# InstantClient : InstantClient
# Administrator : Administrator
# Runtime : Runtime
# Custom : Custom
#Example : INSTALL_TYPE = "Administrator"
oracle.install.client.installType=Custom
# Name : oracle.install.client.customComponents
# Datatype : StringList
# This property is considered only if INSTALL_TYPE is set to "Custom"
# Description: List of Client Components you would like to install
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
# oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.1.0 -- "Oracle Net"
# oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
# oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
# oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
# Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
#Name : MTS_PORT
#Datatype : int
#Description: Port number to be used for by the Oracle MTS Recovery Service to listen
#          for requests. This needs to be entered in case oracle.ntoramts is
#     selected in the list of custom components in custom install
#Example : MTS_PORT = 2030
oracle.install.client.oramtsPortNumber=49152
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
oracle.install.client.schedulerAgentHostName=
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
oracle.install.client.schedulerAgentPortNumber=
LOG FILE TO FOLLOW

LOG FILE:
Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
The commandline for unzip:
Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Setting Response file data to the Installer
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
INFO: Translating external format into raw format
INFO: Loaded BeanStore using the flow data source
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
ient\install\../stage/products.xml
INSTALL_TYPE Custom
INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE C:\Oracle
ORACLE_HOME C:\Oracle\product\11.2.0\client_1
ORACLE_HOSTNAME GBA-P74444432
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
.0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
et_2:11.2.0.1.0"}
oracle_install_client_OraMTSPortNumber 49152
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in SILENT mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
INFO: Verifying route INVENTORY_NO_CUSTOM_YES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1023.5547MB (1048120.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:130MB
INFO: Actual Value:21.3053GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
WARNING: Result values are not available for this verification task
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <checkPrereqs>
INFO: Terminating all background operations
INFO: Terminated all background operations
WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver

DPM 2012 Agent installation issue

I have SCDPM 2012 RTM installed on my machine and whenever I try to install the agent remotely , DPM services stops and installation stucks at 1 percentage,
Mohan Kumar.

hi Both,
Yes I tried both the options mentioned but still I am facing the same issue. My Agent Co-ordinator service in DPM Master server goes stopped mode frequently. Below are the errors.
+ System
- Provider
   [ Name] Service Control Manager
   [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
   [ EventSourceName] Service Control Manager
- EventID 7036
   [ Qualifiers] 16384
   Version 0
   Level 4
   Task 0
   Opcode 0
   Keywords 0x8080000000000000
- TimeCreated
   [ SystemTime] 2012-09-17T09:17:10.071569200Z
   EventRecordID 86366
   Correlation
- Execution
   [ ProcessID] 588
   [ ThreadID] 8352
   Channel System
   Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
   Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
   440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00   D.P.M.A.
0008: 43 00 2F 00 31 00 00 00   C./.1...
+ System
- Provider
   [ Name] Service Control Manager
   [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
   [ EventSourceName] Service Control Manager
- EventID 7036
   [ Qualifiers] 16384
   Version 0
   Level 4
   Task 0
   Opcode 0
   Keywords 0x8080000000000000
- TimeCreated
   [ SystemTime] 2012-09-17T09:17:10.071569200Z
   EventRecordID 86366
   Correlation
- Execution
   [ ProcessID] 588
   [ ThreadID] 8352
   Channel System
   Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
   Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
   440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00   D.P.M.A.
0008: 43 00 2F 00 31 00 00 00   C./.1...
Mohan Kumar.

Agent Installation Issue

Hi guys . While installing the agent on an asset Solaris system:
root@system: /var/tmp/OC $ /opt/SUNWxvmoc/bin/agentadm configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
agentadm: Version 12.1.2.2161 launched with args: configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : workarounds configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : db configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
Validating step : sc_console configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
verified sc_console command is OK
Validating step : setup_hmp configure -u root -p /var/tmp/OC/mypasswd
Validating step : scn_agent configure
scn_agent Common Agent Container environment is OK
Validating step : setup_net configure
skipping setup_net step for zone VC.
Validating step : uce_agent configure
Validating step : config_sysconfig configure
Validating step : final configure
End of validation
executing step : workarounds
workaround configuration done.
executing step : db
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
configuring db
INFO: hd_domain_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for Domain Model successful
configuring jobs db
INFO: hd_jobs_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for job manager successful
INFO: db decrypted the password.
executing step : sc_console
verified sc_console command is OK
Configuring sc_console
*checking existing sc_console connections
doing sc-console registration
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
CE: java.net.ConnectException: Connection timed out
Code: 10
ERROR: Connection refused.
sc-console registration failed on [10].
sc-console : Unknown error. *
It does not seem to be connecting . What seems to be the issue here and how can I resolve it ?

Hi,
it looks like the network error I had in the past. Doe haave a firewall between Client and Proxy ?
Is your client connected to more than one network ? If so it can be helpful to use the -a option.
I would check firewall andd routing.
Kind regards
tunix2k

Oracle 10g Database Release 1 Installation Issue

Hi:
The install seems to finish everything without a problem except when it's configuring the Configuration Assistants, specifically the Oracle Database Configuration Assistants (after succeeding Oracle Net Configuration Assistant and iSQL*Plus Configuration Assistant).
The configuration stopped at 2% during the progress as it's copying database files (cloning database creation) and a pop-up flagged "ORA-12638: Credential retrieval failed". If I click "Ignore" then the same message will come up again. I can keep clicking ignore to have it finished the process but at the end it will flag: "Enterprise manager configuration failed due to the following error - 'job_queue_processes' must be greater than or equal to 1..." Then the install showed the configuration "Succeeded" and I exited out of the install.
When I open the Oracle Enterprise Manager Console from the Oracle Client package options of the Windows Start Menu and try to connect to the ORCL_LOCALHOST database, I typed in the default username and password that was assigned during the install ("orcl" and "orcl") and I pop-up warned that "SID given in connect descriptor could not be resolved." Does anyone know what goes wrong here? I have selected all the default option during the install except I have selected a single password for multiple databse items and assigned the single password "orcl" for all instances. Hence "orcl" is the only term I have used for username, database name, SID and password. Will that generate an issue or there's another problem that's affecting my progress.
My ultimate goal is to be able to connect to the database and create some schemas. Hope this details my problem and please feel free to request more info if necessary. Thanks and have a nice day.

The configuration stopped at 2% during the progress
as it's copying database files (cloning database
creation) and a pop-up flagged "ORA-12638: Credential
retrieval failed". If I click "Ignore" then the same
message will come up again. I can keep clicking
ignore to have it finished the process but at the end
it will flag: "Enterprise manager configuration
failed due to the following error -I had the same problem with installing 10g R2 on Windows.
I got around it by editing the network/admin/sqlnet.ora file as follows:SQLNET.AUTHENTICATION_SERVICES= (NONE)
and running the config assistant manually (./bin/dbca.bat, accepting all defaults).
hope that helps!
-- Bill

Oracle Audit Vault Server & Agent Installation Error.

Hi,
I am new to Audit vault. When I install Audit Vault on Windows 2008 R2 it throws an error after installing 99%. Kindly help me to resolve.
OS Version : Windows 2008 R2
Oracle Audit Vault Version: 10.2.3.2
Error:
Audit Vault Server:
INFO: Configuration assistant "Oracle Audit Vault Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.3\av_1
Configuration directory is set to C:\oracle\product\10.2.3\av_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Created a new file C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\oracle\product\10.2.3\av_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
xception: VariableNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQu
Also while installing Collection agent, it throws the error while executing runInstaller.
OS Version : AIX 6.1
Oracle Audit Vault Agent Version: 10.2.3.2
Audit Agent:
bash-3.2$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5200 or 5300
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2011-05-12_05-11-03PM/installActions2011-05-12_05-11-03PM.log
*/tmp/OraInstall2011-05-12_05-15-39PM>*cat installActions2011-05-12_05-15-39PM.log
Using paramFile: /finacle/avagent/aix_5l64/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5200 or 5300
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2011-05-12_05-15-39PM/installActions2011-05-12_05-15-39PM.log
Thanks & Regards,
Mithra.
Edited by: 864048 on Jun 7, 2011 2:57 AM

Hi ,
Please try the following:
Execute the setup in cmd with -ignoreSysPrereqs option.
Thank you.

Oracle 10gR2 Grid Management Agents installation issues

Similar Messages

Maybe you are looking for