Oracle 10GR2 Installation On Cloud

Hi Exports,
Can anyone give me some knowledge how to Install Oracle 10GR2 on Cloud Server (Windows Server 2008 R2 64 bit). as i am very new to install Oracle in Cloud server. I am trying to install it but failed to proceed next after selecting advance installation.
Thanks in advance...

A server is a server is a server, whether physical sitting under your desk or in a datacenter, or virtual in "a cloud". The install process is the same as documented in the installation guide.
http://docs.oracle.com/cd/B19306_01/install.102/b15681/toc.htm
Which exact version of 10gR2 ? You will need 10.2.0.4 or later - http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
Have you met all of the pre-reqs and are you following all of the steps in the Install Guide ? Pl post the last 100 lines from the install log - http://docs.oracle.com/cd/B19306_01/install.102/b15681/ts.htm#i1090466
HTH
Srini

Similar Messages

Oracle 10GR2 Installation Error Red Hat EL4

Hello,
I'm currently installing Oracle 10GR2 on Red Hat EL 4 and I get an error when
i'm 62% (Oracle Net Required Support Files 10.2.0.1.0). The error is the following:
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0
/db_1/network/lib/ins_net_client.mk'.
When I look the make.log file it shows this:
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
gcc: installation problem, cannot exec `cc1': No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
My version of the gcc is 3.4.5-2

read the oracle installation manual and install all recomended RPM then problem will resolved. binunit rpm is also required.
i had got this problem and resolved by installing recomended rpms.

Oracle 10gR2 installation error: ./runInstaller: line 54: PermissionDenied

Getting an error while installing oracle 10g release 2 on CentOS 5 (Linux Distribution)
Installed prerequisite RPM's:
-compat-db-4.2.52-5.1.i386.rpm - sysstat-7.0.2-1.el5.i386.rpm - libaio-devel-0.3.106-3.2.i386.rpm - libXp-1.0.0-8.1.el5.i386.rpm
And after making all changes to:
* Kernel Parameters * Setting Shell parameters * pam.d (login file) * centos/redhat release and profile files * created required groups and users.
Created path: /u01/app/oracle/product/10.1.0/db_1 (OFA Compliant) and copied .zip file in to it (Tried with a different path as well : install folder).
Unzipped the zipper file with 'oracle' user but getting an error while trying to run installer file (runInstaller)
===========================================================
[oracle@localhost database]$ ./runInstaller
*./runInstaller: line 54: /tmp/install/database/install/.oui: Permission denied*
[oracle@localhost database]$ ls -lh runInstaller
-rwxr-xr-x 1 root root 1.3K Jul 2 2005 runInstaller
===========================================================
Machine Details:
OS: CentOS
Environment: VMWare
DB: Oracle 10gR2
Space (Swap and Physical): Up to the mark as required.
Assistance required
Thanks
- Prashant Dixit

Hi Srini,
It worked but i'm getting a new error here while laucnhing Oracle Universal Installer:
==============================================
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-01-27_12-25-14PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
==============================================
- Please Suggest.
Thanks
Prashant Dixit

Oracle 10gR2 installation Media

Hi,
I can see on OTN where I can download Oracle 10gR2 for all platforms, and I can see on oraclepartnernetwork where I can request installation media be shipped for 10gR1.
Where do I request official installation media from Oracle for 10gR2???
Cheers for any feedback

You want the CDs? You can get a media pack from http://store.oracle.com/
If you just wante the images you probably need to go to edelivery.
~Jer

Documentation for Oracle 10gR2 Installation

Hello,
I would like to know which document should I download in order to install Oracle 10gR2 on the following system:
-HW: IBM System x3550M3 Intel Xeon
-SW: Red Hat Linux 5.4
Thanks in advance for you help.
Regards,
Juan.

850252 wrote:
Hello,
I would like to know which document should I download in order to install Oracle 10gR2 on the following system:
-HW: IBM System x3550M3 Intel Xeon
-SW: Red Hat Linux 5.4
Thanks in advance for you help.
Regards,
Juan.http://www.oracle.com/pls/db102/homepage?remark=tahiti
Linux Installation Guide

Oracle 10gR2 installation problem on Solaris (sparc-64 bit)

Hi All,
I am unable to install Oracle 10gR2 on Solaris, I cannot understand what is wrong could u anybody help me that,
Regards
Harpreet Singh

I also have a similar problem, when I insert the key in my car sometimes it does not start. I cannot understand what is wrong could you help me?
Otherwise, It's been raining lately and our crystal ball's are somewhat foggy; therefore we cannot guess what is you problem.

Oracle 10gR2 Installation on Cold Failover Cluster

Installation document recuired for Oracle 10g R2 on Cold Failover Cluster in Redhat Linux 4 platform.
Message was edited by:
user491196

user12974178 wrote:
checking network configuration requirements
check complete: The overall result of this check is : Not Executed
Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
However , the primary network Interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
software on systems configured with DHCP
Could anyone help me in this regard
Thanks in AdvanceYour problem is:
"However , the primary network Interface on the system should be configured with a static IP address in order for the Oracle Software to function properly"
Your solution is
"See the Installation Guide for more details on installing the software on systems configured with DHCP"
That book is at http://tahiti.oracle.com and the steps you need are in Chapter 2 of the Installation Guide for Linux.
Now, I could assume this is Oracle 11gR2 and you are using Oracle Enterprise Linux 5 Update 4, but I won't. Assuming things gets me into trouble.

Oracle 10gR2 installation on Redhat 5 hangs on 12%

Dear experts
I'm installing a 2 node Oracle 10gR2 on Redhat 5. Everything is ok when installing Oracle Clusterware and it works fine with all the services up and running. But when I start installing the Oracle Database, OUI hangs on 12%. I found couple of articles recommending to use another JRE so I tried SUN JRE 1.4.2 and point Oracle to it but still no luck. I also found something saying about '' optimized glibc package" for Oracle 9i which looks very familiar with my problem ( http://osdir.com/ml/linux.ubuntu.server/2006-12/msg00019.html )
I appreciate any help.
Thank you in advance.
Kamy
Edited by: kamy_a on Jun 20, 2009 5:05 PM

10gR2 on RH5 requires specific preparations, see on metalink:
Requirements For Installing Oracle 10gR2 On RHEL/OEL 5 (x86)
Doc ID: 419646.1
Werner

Oracle 10gR2 Installation on Linux 86(CHECKING NETWORK CONFIGURATION REQ)

I tried to install oracle10gR2 on Redhat Linux X86 machine.
In the middle of installation i got the following ERROR::
checking network configuration requirements
check complete: The overall result of this check is : Not Executed
Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
However , the primary network Interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
software on systems configured with DHCP
Could anyone help me in this regard
Thanks in Advance

user12974178 wrote:
checking network configuration requirements
check complete: The overall result of this check is : Not Executed
Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
However , the primary network Interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
software on systems configured with DHCP
Could anyone help me in this regard
Thanks in AdvanceYour problem is:
"However , the primary network Interface on the system should be configured with a static IP address in order for the Oracle Software to function properly"
Your solution is
"See the Installation Guide for more details on installing the software on systems configured with DHCP"
That book is at http://tahiti.oracle.com and the steps you need are in Chapter 2 of the Installation Guide for Linux.
Now, I could assume this is Oracle 11gR2 and you are using Oracle Enterprise Linux 5 Update 4, but I won't. Assuming things gets me into trouble.

Oracle 10gR2 installation on Linux

Hi,
I have installed Oracle 10gR2 on Fedora 11 in my laptop for personal use and it is working fine.Now i have created another user oradev and i want to control the database form oradev user.When i am issuing the command sqlplus/proc for development work it is showing error
command not foundand when i am issuing the same by giving the full path of sqlplus it is giving some shared library error .
Since the database is in localhost ,it should be available to all OS users and any user can work on the database .
For your information i am able to connect the databse through Enterprise Manager and sqldeveloper but for pro*c Development i need to connect from the console only .
Can anybody tell me to work as the "oracle" user what set up i have to do in" oradev" user so that i can achieve my Requirements.
Regards,
Dhabas

Most people will advise putting environment variables into your .profile. This is bad advice because it limits the way you can work in the future.
Better is to use the oracle environment configuration program provided by Oracle. It will verify that you do not have conflicting binaries in your path.
To do so, as described in the "Administrator's Reference for UNIX-Based Operating Systems" at http://www.oracle.com/pls/db102/portal.portal_db?selected=3, you SOURCE oraenv.
First, cat /etc/oratab to find out the list of databases. They are at the bottom of the file. The first column will provide the instance SID.
Then, in your terminal (or shell script used for cron, etc) SOURCE oraenv (use dot space oraenv) and tell it the SID you want to use. In a shell script, such as my .bash_profile, I use
ORAENV_ASK=NO
export ORACLE_SID=orcl
. oraenv
unset ORAENV_ASKThe result is that the correct sqlplus for that Oracle Home should now work.

Rhel 5.5 oracle 10gr2 installation path

dear gurus
oracle software installation sucessfully done, then when try using dbca it select by default wrong path as /u01/app/oracle, where i supposed to go everything inside /oracle
i want to install everything under /oracle, where i install first oracle software
then when i went to oracle home direction /bin folder where i run #dbca, so i accept all parameters
but before start database installation it says path not found or exisit
/u01/app/oracle
however i made every where even in oracle .bash_profile path as
export ORACLE_BASE=/oracle
could someone give hints ideas what and where to check.
kind regards
muhamma

dear sirs see ur posts,
$ env | grep oracle
ORACLE_PATH=/oracle/dba_scripts/common/sql:.:/oracle/product/10.2.0/db_1/rdbms/admin
OLDPWD=/oracle/oraInventory
USER=oracle
LD_LIBRARY_PATH=/oracle/product/10.2.0/db_1/lib:/oracle/product/10.2.0/db_1/oracm/lib:/lib:/usr/lib:/usr/local/lib
ORA_NLS10=/oracle/product/10.2.0/db_1/nls/data
ORACLE_BASE=/oracle
TNS_ADMIN=/oracle/product/10.2.0/db_1/network/admin
MAIL=/var/spool/mail/oracle
PATH=.:/usr/local/java/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/oracle/product/10.2.0/db_1/bin:/usr/bin:/bin:/usr/bin/X11:/usr/local/bin:/oracle/dba_scripts/common/bin
HOME=/home/oracle
LOGNAME=oracle
CLASSPATH=/oracle/product/10.2.0/db_1/JRE:/oracle/product/10.2.0/db_1/jlib:/oracle/product/10.2.0/db_1/rdbms/jlib:/oracle/product/10.2.0/db_1/network/jlib
ORACLE_HOME=/oracle/product/10.2.0/db_1
this is the results appear from my putty or securecrt,
however when i do login as gui it shows the all above path as
/u01/app/oracle
i reboot the machine to test, however during oracle software installation no issues raised

Oracle 10gR2 installation fails in Solaris 10

Hi All,
I am facing the following problem in Solaris 10 SPARC 64 bit machine.
1.     Downloaded Oracle 10g R2 installable from oracle
2.     Created user oracle and group dba and modified project settings and permissions as per quick installation guide
3.     Installation of software is successful. But dbca fails with following error message.
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece /vol1/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_Database.dfb
ORA-19587: error occurred at reading 0 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27067: size of I/O buffer is invalid
4.     I also tried creating scripts using dbca and running it manually. It fails with following error message in trace file
Corrupt block 1 found during reading backup piece, file=/ora10gr2/ora10gr2/product/10.2.0/Db_1/assistants/dbca/templates/Seed_
Database.dfb, corr_type=3
5.     Creation of custom database also fails with similar error message
It is Solaris 10 (Solaris 10 11/06 s10s_u3wos_10 SPARC) machine with patch level 125100-05 .
I know this question has to be posted in Oracle forums. But I could not see others facing this issue in oracle forums. If anybody has faced this issue please let me know.
Thanks!

Yes, I was trying to install Oracle for Solaris sparc 64 bit.
again I reformatted the system with Solaris 10 8/07 release but I am getting the same error. Machine model is v480. even i tried to create a database manually, CREATE DATABASE command fails with the same error
Please find trace file content below
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
control_files            = /u01/ora10gr2/c1.ctl, /u01/ora10gr2/c2.ctl, /u01/ora10gr2/c3.ctl
db_block_size            = 8192
undo_management          = AUTO
db_name                  = ORA10
PMON started with pid=2, OS id=1331
PSP0 started with pid=4, OS id=1333
MMAN started with pid=6, OS id=1335
DBW0 started with pid=8, OS id=1337
DBW1 started with pid=3, OS id=1339
LGWR started with pid=5, OS id=1341
CKPT started with pid=10, OS id=1343
SMON started with pid=12, OS id=1345
RECO started with pid=14, OS id=1347
MMON started with pid=16, OS id=1349
MMNL started with pid=18, OS id=1351
Tue Oct 9 16:45:17 2007
create database ORA10
logfile   group 1 ('/u01/ora10gr2/redo1.log') size 10M,
group 2 ('/u01/ora10gr2/redo2.log') size 10M,
group 3 ('/u01/ora10gr2/redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile '/u01/ora10gr2/system.dbf'
size 50M
autoextend on
next 10M maxsize unlimited
extent management local
sysaux datafile '/u01/ora10gr2/sysaux.dbf'
size 10M
autoextend on
next 10M
maxsize unlimited
undo tablespace undo
datafile '/u01/ora10gr2/undo.dbf'
size 10M
default temporary tablespace temp
tempfile '/u01/ora10gr2/temp.dbf'
size 10M
Tue Oct 9 16:45:18 2007
Hex dump of (file 0, block 9) in trace file /u01/ora10gr2/product/10.2.0/Db_2/rdbms/log/ora10_ora_1352.trc
Corrupt block relative dba: 0x00000009 (file 0, block 9)
Bad check value found during control file block write
Please suggest some other troubleshooting steps

Oracle 10gr2 installation failed.

Dear All,
Please see my next post, it accidently submitted.
hare krishna
Alok
Message was edited by:
Alok Kumar

Hi all
Werner
sory this was 11.23 and 11.31
Im installing Oracle Database 10g Release 2 (10.2.0) on HP-UX Itanium Version 11i v3 (11.31).
I managed to solve the error by including -ignoreSysPreReqs
but got another problem
when creating the database using DBCA im getting error (Can not access /etc/oratab)

10gR2 installation problem on HP-UX 11.31 on Itanium

Oracle 10gR2 installation on a HP-UX 11.31 Itanium just hangs at the "./runInstaller -ignoreSysPrereqs &". OraInstall log shows "-ignoreSysPrereqs" as the last line & the installation doesn't move at all. Any ideas, why ?

Hello,
I didn't had this problem with the same binaries last year on hp-ux 11iv3 but i have it now.
The things that changed is the OS (last HP-UX version, always 11iv3 but patched) and the hardware but i am not in charge of them and have no time to investigate.
The solution provided (use of the JVM from the OS) is OK for me.
UPDATE : after consulting the Doc 780102.1 on Metalink, we can see that the bug is due to the installation of the September 2008 update of HPUX 11iv3, the solution given is to set jvmloc option.
Regards.
Edited by: Dba Z on Jul 23, 2009 12:54 AM

Oracle 10gR2 Patch Set 3 - Clustering Service (CSS) failed to start

Hi ,
we are using Solaris 10 containers. Oracle 10gR2 installation done with ASM in Non-global zone and it was successful, after applying patch set 3 CSS service unable to start and won't generate any error message.
OS : solaris 10
DB : Oracle 10gR2
any pointer will help us to resolve this issue.
Regards,
Sachin

Hi,
Cause
1) This is a LANG problem. So this can be confirmed by tracing the init.cssd script (executed by the init/inittab), as follow:
h1:3:respawn:/etc/init.d/init.cssd run >/var/log/init-cssd.run 2>&1 </var/log/init-cssd.run
2) /var/log/init-cssd.run log extract:
TZ=
+ export TZ
LANG=
+ export LANG
+ /bin/who -b
+ exit 0
BOOTID= . system boot srp 7 16:44
+ /bin/cat /var/opt/oracle/scls_scr/db4/root/cssrun
RUNID= . system boot Aug 7 16:44
+ [ . system boot srp 7 16:44 != . system boot Aug 7 16:
44 ]
+ [ . system boot Aug 7 16:44 = startstack ]
+ exit 3
STATUS=3
+ [ 3 != 0 ]
+ exit 3
+ [ 3 != 0 ]
+ /bin/sleep 30
Solution
1) Set the LANG environment variable in /etc/init.d/init.cssd script (in GETBOOTID section) to cs_CZ.ISO8859-2:
# Set a null language id. GETBOOTID can also be sensitive to the language
# codes, when init.cssd is run in a user shell compared to being run
# under init. Setting a blank language code should guarantee consistency.
LANG=cs_CZ.ISO8859-2
2) Then CSS will start.
$>crsctl check crs
CSS appears healthy
Cannot communicate with CRS
Cannot communicate with EVM
$>ps -fea | grep ocssd.bin | grep -vi grep
oracle 407 1 0 Aug 13 ? 3:50 /oracle2/V10g2/bin/ocssd.bin
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Oracle 10GR2 Installation On Cloud

Similar Messages

Maybe you are looking for