Oracle 10gR2 Installation on Cold Failover Cluster

Installation document recuired for Oracle 10g R2 on Cold Failover Cluster in Redhat Linux 4 platform.
Message was edited by:
user491196

user12974178 wrote:
checking network configuration requirements
check complete: The overall result of this check is : Not Executed
Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
However , the primary network Interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
software on systems configured with DHCP
Could anyone help me in this regard
Thanks in AdvanceYour problem is:
"However , the primary network Interface on the system should be configured with a static IP address in order for the Oracle Software to function properly"
Your solution is
"See the Installation Guide for more details on installing the software on systems configured with DHCP"
That book is at http://tahiti.oracle.com and the steps you need are in Chapter 2 of the Installation Guide for Linux.
Now, I could assume this is Oracle 11gR2 and you are using Oracle Enterprise Linux 5 Update 4, but I won't. Assuming things gets me into trouble.

Similar Messages

  • OracleAS cold failover cluster

    I am installing oracleAS cold failover cluster. but during installing a am getting error in database configuration
    assistant. can anybody help me?

    This is as simple as "Two heads think better that once", for this you will have two points (or more) of access to your applications, the process are split between servers and if one of the nodes fails, there are other to backup them. That's the only think that a Cold Fail Over cluster does, as well the administration is centralized if you have a nice configuration you will need to do only one configuration and all nodes will notice about it, finaly when you have a cold fail over cluster you have 50% of your potential workload in use, you have a server as a portrait that only is good to look at it but doesn't do nothing else, you dont need benchmarks or notes, this is really simple as it sounds.
    Greetings.

  • Oracle 9i installation on Windows 2003 Cluster

    Hi
    I Need any good documentation for Oracle 9i installation on Windows 2003 Cluster.

    Complete Guide is here
    http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm

  • Oracle Infrastructure in Cold Failover Cluster

    Hello,
    I have browsed through the Oracle docs for High Availability, but I cannot find any information abourt achieving that CFC HA for OAS Infrastructura using RedHat EL AS and HP Serviceguard...
    Can anyone help me?
    thanks in advance, and best regards

    user7575753 wrote:
    I'm running OAS 10.1.2.2.0 on a windows 2003 server under a cold failover clustered environment and was wondering... Is it recommended to have one web application deployed in it's own separate instance? For example, webapp1 deployed to instance1 and webapp2 deployed to instance2? Or would it be better to have multiple web applications deployed to one instance?
    Thanks for any thoughts!I can say your configuration is ok for single instance failover . Once u like to make cluster and load balance , OAS hs managed and non-managed cluster.
    For Managed Cluster , you must setup either Oracle WebCache or F5 Big/IP . With regard to non-managed cluster, that means nothing required to share .

  • How to deploy oracle 11g under cold failover cluster

    Hi,
    I am trying to install oracle 11g under failover cluster environments. I am trying to find some oracle documentation about it. But not able to find one. Can anyone help me. Please i need it badly.
    we have two servers sun solaris 10. on which we have failover cluster being installed. one is active while one is passive. How can i install oracle 11g on this failover clusters. did i have to install oracle of shared SAN. what are the extra configuration i have to do please help
    Also is it wise to install 11g warehouse with fail safe or use RAC.
    regards
    Nick
    Edited by: Nick Naughty on Feb 1, 2009 4:02 AM

    thanks alot for reply.
    I am of the same point of view. but the machine i am working on is sun solaris 10 with two partitions finance and accounts which have been protected by a failed over machine having two partitions finance and accounts and i think you are right these are the same shared storage folder which are mounted on active machine as well as on passive machine.
    Now my question is if i install oracle 11g on one machine without oracle cluster then sun cluster should be able to mount the database in case the primary machine fails.
    I have tried hard to get some documentation on this top but nothing so far. please help
    regards
    Nick

  • OC4J Instances in Cold Failover Cluster

    I'm running OAS 10.1.2.2.0 on a windows 2003 server under a cold failover clustered environment and was wondering... Is it recommended to have one web application deployed in it's own separate instance? For example, webapp1 deployed to instance1 and webapp2 deployed to instance2? Or would it be better to have multiple web applications deployed to one instance?
    Thanks for any thoughts!

    user7575753 wrote:
    I'm running OAS 10.1.2.2.0 on a windows 2003 server under a cold failover clustered environment and was wondering... Is it recommended to have one web application deployed in it's own separate instance? For example, webapp1 deployed to instance1 and webapp2 deployed to instance2? Or would it be better to have multiple web applications deployed to one instance?
    Thanks for any thoughts!I can say your configuration is ok for single instance failover . Once u like to make cluster and load balance , OAS hs managed and non-managed cluster.
    For Managed Cluster , you must setup either Oracle WebCache or F5 Big/IP . With regard to non-managed cluster, that means nothing required to share .

  • Cold failover cluster for repository ?

    Hi,
    We have Box A (infra and mid) and B(mid),
    we want to use Box B for cold failover claster
    Any suggestion on how to do this?
    TIA

    Similar question was asked recently in our forum:
    http://social.msdn.microsoft.com/Forums/en-US/18239da7-74f2-45a7-b984-15f1b3f27535/biztalk-clustering?forum=biztalkgeneral#4074a082-8459-420f-8e99-8bab19c8fba2
    White paper from Microsoft on this context shall you with step-by-step guidance of failover cluster for BizTalk 2010.
    http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=2290
    Also refer this blog where authors in series of his post guides with the steps required:
    Part 1: BizTalk High Availability Server Environment – Preparations
    Part 2: BizTalk High Availability Server Environment–Domain Controller Installation
    Part 3: BizTalk High Availability Server Environment – SQL & BizTalk Active Directory Accounts
    Part 4: BizTalk High Availability Server Environment – Prepping our SQL & BizTalk Failover Clusters
    Part 5: BizTalk High Availability Server Environment – SQL Server 2008r2 Failover Cluster
    Part 6: BizTalk High Availability Server Environment–BizTalk 2010 Failover Cluster Creation
    Part 7 – BizTalk High Availability Server Environment –BizTalk 2010 Installation, Configuration
    and Clustering
    Par 8 - Adding Network Load balancing to our High Availability Environment
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Oracle 10GR2 Installation Error Red Hat EL4

    Hello,
    I'm currently installing Oracle 10GR2 on Red Hat EL 4 and I get an error when
    i'm 62% (Oracle Net Required Support Files 10.2.0.1.0). The error is the following:
    Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0
    /db_1/network/lib/ins_net_client.mk'.
    When I look the make.log file it shows this:
    /usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1/rm -f ntcontab.*
    (if [ "compile" = "compile" ] ; then \
    /u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
    /usr/bin/gcc -c ntcontab.c ;\
    rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
    mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
    /usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
    gcc: installation problem, cannot exec `cc1': No such file or directory
    mv: cannot stat `ntcontab.o': No such file or directory
    /usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
    make: *** [ntcontab.o] Error 1
    My version of the gcc is 3.4.5-2

    read the oracle installation manual and install all recomended RPM then problem will resolved. binunit rpm is also required.
    i had got this problem and resolved by installing recomended rpms.

  • Oracle 10gR2  installation error: ./runInstaller: line 54: PermissionDenied

    Getting an error while installing oracle 10g release 2 on CentOS 5 (Linux Distribution)
    Installed prerequisite RPM's:
    -compat-db-4.2.52-5.1.i386.rpm - sysstat-7.0.2-1.el5.i386.rpm - libaio-devel-0.3.106-3.2.i386.rpm - libXp-1.0.0-8.1.el5.i386.rpm
    And after making all changes to:
    * Kernel Parameters * Setting Shell parameters * pam.d (login file) * centos/redhat release and profile files * created required groups and users.
    Created path: /u01/app/oracle/product/10.1.0/db_1 (OFA Compliant) and copied .zip file in to it (Tried with a different path as well : install folder).
    Unzipped the zipper file with 'oracle' user but getting an error while trying to run installer file (runInstaller)
    ===========================================================
    [oracle@localhost database]$ ./runInstaller
    *./runInstaller: line 54: /tmp/install/database/install/.oui: Permission denied*
    [oracle@localhost database]$ ls -lh runInstaller
    -rwxr-xr-x 1 root root 1.3K Jul 2 2005 runInstaller
    ===========================================================
    Machine Details:
    OS: CentOS
    Environment: VMWare
    DB: Oracle 10gR2
    Space (Swap and Physical): Up to the mark as required.
    Assistance required
    Thanks
    - Prashant Dixit

    Hi Srini,
    It worked but i'm getting a new error here while laucnhing Oracle Universal Installer:
    ==============================================
    [oracle@localhost database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-01-27_12-25-14PM. Please wait ...[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
    at java.awt.Window.init(Unknown Source)
    at java.awt.Window.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
    at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
    ==============================================
    - Please Suggest.
    Thanks
    Prashant Dixit

  • Oracle 10GR2 Installation On Cloud

    Hi Exports,
    Can anyone give me some knowledge how to Install Oracle 10GR2 on Cloud Server (Windows Server 2008 R2 64 bit). as i am very new to install Oracle in Cloud server. I am trying to install it but failed to proceed next after selecting advance installation.
    Thanks in advance...

    A server is a server is a server, whether physical sitting under your desk or in a datacenter, or virtual in "a cloud". The install process is the same as documented in the installation guide.
    http://docs.oracle.com/cd/B19306_01/install.102/b15681/toc.htm
    Which exact version of 10gR2 ? You will need 10.2.0.4 or later - http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
    Have you met all of the pre-reqs and are you following all of the steps in the Install Guide ? Pl post the last 100 lines from the install log - http://docs.oracle.com/cd/B19306_01/install.102/b15681/ts.htm#i1090466
    HTH
    Srini

  • Oracle 10gR2 installation Media

    Hi,
    I can see on OTN where I can download Oracle 10gR2 for all platforms, and I can see on oraclepartnernetwork where I can request installation media be shipped for 10gR1.
    Where do I request official installation media from Oracle for 10gR2???
    Cheers for any feedback

    You want the CDs? You can get a media pack from http://store.oracle.com/
    If you just wante the images you probably need to go to edelivery.
    ~Jer

  • 10g in a Cold Failover Cluster

    Hallo,
    I have some doubts about configuration of a single instance in a two node cluster for a cold failover solution.
    I mean,
    1 - in listener.ora I should put the floating-ip hostname?
    2 - to create a dbconsole, do I have to use ORACLE_HOSTNAME variable?
    thanks in advance

    Even if in Metalink note 362524.1,
    a "failing over" db console need a shared home,
    I successed in creating hostname indipendent one in few steps
    1 - Setting ORACLE_HOSTNAME=clustername (and resolving the clustername with the floating ip in etc/hosts in server and client machines)
    2 - Creating the db console with repository in active node and w/o repository on passive one.
    That's all,
    Bye

  • Documentation for Oracle 10gR2 Installation

    Hello,
    I would like to know which document should I download in order to install Oracle 10gR2 on the following system:
    -HW: IBM System x3550M3 Intel Xeon
    -SW: Red Hat Linux 5.4
    Thanks in advance for you help.
    Regards,
    Juan.

    850252 wrote:
    Hello,
    I would like to know which document should I download in order to install Oracle 10gR2 on the following system:
    -HW: IBM System x3550M3 Intel Xeon
    -SW: Red Hat Linux 5.4
    Thanks in advance for you help.
    Regards,
    Juan.http://www.oracle.com/pls/db102/homepage?remark=tahiti
    Linux Installation Guide

  • Oracle 10gR2 installation problem on Solaris (sparc-64 bit)

    Hi All,
    I am unable to install Oracle 10gR2 on Solaris, I cannot understand what is wrong could u anybody help me that,
    Regards
    Harpreet Singh

    I also have a similar problem, when I insert the key in my car sometimes it does not start. I cannot understand what is wrong could you help me?
    Otherwise, It's been raining lately and our crystal ball's are somewhat foggy; therefore we cannot guess what is you problem.

  • Oracle 10gR2 installation on Redhat 5 hangs on 12%

    Dear experts
    I'm installing a 2 node Oracle 10gR2 on Redhat 5. Everything is ok when installing Oracle Clusterware and it works fine with all the services up and running. But when I start installing the Oracle Database, OUI hangs on 12%. I found couple of articles recommending to use another JRE so I tried SUN JRE 1.4.2 and point Oracle to it but still no luck. I also found something saying about '' optimized glibc package" for Oracle 9i which looks very familiar with my problem ( http://osdir.com/ml/linux.ubuntu.server/2006-12/msg00019.html )
    I appreciate any help.
    Thank you in advance.
    Kamy
    Edited by: kamy_a on Jun 20, 2009 5:05 PM

    10gR2 on RH5 requires specific preparations, see on metalink:
    Requirements For Installing Oracle 10gR2 On RHEL/OEL 5 (x86)
    Doc ID: 419646.1
    Werner

Maybe you are looking for