Oracle 11.1.0.6.0 db_block_size change

Hi
Could you please help me in providing the steps for changing the db_block_size on an existing database Oracle 11.1.0.6.0 which is with data.
Thanks,

Though in brief,
1.First take a full database export of the existing database (addition to this take a complete cold backup for replication purpose).
2.Drop the existing database.
3.Create a new database with the same settings (create the non-system tablespaces , all datafiles should be in same location as in dropped database ) except db_block_size.
4.Finally Import the exported data into the newly created database.
If it fails then go back to your old database using available cold backup..
Regards,
Shafiulla Syed

Similar Messages

When Oracle 11g new features 1z0-050 exam changed last time ??

Hi everyone,
Can anybody tell me that when the last time Oracle 11g new features 1z0-050 exam changed?? Does it changed recently, or its going to be change in near future??
Thanks and Regards,
Khurram

bigdelboy wrote:
Khurram Bhatti wrote:
Hi everyone,
Can anybody tell me that when the last time Oracle 11g new features 1z0-050 exam changed?? Does it changed recently, or its going to be change in near future??
Thanks and Regards,
Khurram1) Possible topic changes between beta and production.
2) When reviewed for 11gR2 rather than 11gR1 ... it is possible, but unlikely, there could have been minor topic changes.
3) IMHO It is unlikely this exam will have further topic changes from those currently shown on the exam page.
( Please note one other exam (117) has possibly recently had issues with not display all topics) ).
Suggest you give more reasons for your question before I will spend any time investigating further, i am pressed for time at the moment.Hi bigdelboy,
Thanks for quick reply. I am going to appear in this exam at this weekend. What basically I wanna ask is that the questions of this exam will be same as when one of my friends appeared 2 months ago?? , or the whole paper/questions could be changed this time ?? I know that the questions came randomly from a set of pool. So is there any possibility that the Oracle has been changed the whole set of pool of questions recently?

Oracle Database 10g Express Edition How to change the prot 8080 ????

Hello I have installed Oracle Database 10g Express Edition
it listen to port 8080 how can I change it to prot i want ?
Thanks

Above post addressed you query. But i suggest Book Mark following doc,it will address most of the queries regarding XE Database
Oracle Database Express Edition 2 Day DBA

[Swing] JTable & Oracle DB: SQL Query for Column Names Change

Hello,
I apologise for the 'stupid' thread subject name.
Now i have a JTable wich i fill with rows from an Oracle DB.
The query is something like this: "SELECT location_id, location_name FROM locations*bold*", and in the table i will have the columns names LOCATION_ID & LOCATION_NAME.
I want to change this query like: "SELECT location_id "Location ID", location_name "Location Name" FROM locations".
The only problem is that i CAN NOT insert "" inside ""
So if anyone know how to fix this 'problem' please share that with me.
Thank you,
B.

found it.. \" \"
:)

Oracle Service Bus - Business Service Endpoint URI - Change at runtime

Hi,
Is there a way of changing/passing the endpoint URI to a Business Service at runtime? The reason for my question is that depending on the content of the message in a Proxy Service that calls this Business Service I may need to change the URI.
Kind Regards,
Adel

Adel,
Is there some use-case limitation that would stop us from using Dynamic routing ?
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1100135.
DynamicRouting /Dynamic publish can be considered depending on the use-case.
Other option is to use Routing options: Modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority.
Manoj

Oracle XE on Windows 7 laptop. Changed computer name, now cannot connect

I run Oracle XE on my laptop with Windows 7. I just changed my computer name and rebooted. Now I cannot connect to the Oracle XE database at all. I found references to the old computer name in the listener.ora and tnsnames.ora files under C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN.
Is there any other file I need to update in order for the change to work?
Thanks!
François

Is the database running? (check near the bottom of alert_xe.log, was the last startup OK ... )
Other than the updated host = <hostname> in listener.ora and TNS alias that should be all the updates that are needed, as long as your <hostname> resolves to the right TCP address, and a reverse lookup on the TCP address shows the new hostname, as a double check it try these in a command box (dunno about win7 if the nslookup is in the winnetworking or maybe something different? hosts?) ...
$ ipconfig /all
Host Name .. : <hostname>
Ethernet adapter Local Area Connection:
... IP[v4?] Address: <your TCP/IP address>
$ nslookup <hostname>
... <your TCP/IP address>
$ nslookup <your TCP/IP address>
... <hostname>

Oracle Application Server 10.1.3 R3 - Change time zone

Hii All,
I am using Oracle application Server 10.1.3 R3 Version. I have installed this application server on my windows VISTA machine. On Concole, OracleAS showing GMT time. I need to set it to Indian timezone.
I have searched a lot but not getting success.
Can anybody help me, how to change time zone ?
Regards,

have a look at this document in metalink. might be helpful . i think you to apply a patch based ( download it from metalink according to your operating system and applicaiton server versions). in my case i have download 5632264 patch ( 10.1.2.0.2 AS & AIX OS).
Timestamps & time zones - Frequently Asked Questions
Doc ID: Note:340512.1
Thanks,

Oracle RAC server's IP and Subnetmask change

Oracle DB Version:10.2.0.3.0
OS version : RedHat linux 4
Number of Nodes: 2
We need to move our RAC db servers from Atlanta to NJ. This move requires IP and subnet mask change. How we can do this chanse in for nodeapps / CRS components?

I am doing a clean installation of RAC 10g rev.2, and during the installation I set the netmask for the VIP to 255.255.252.0, which is different from the pub netmask of 255.255.255.0.
I ran the following:
srvctl modify nodeapps -n rachost1 -A 192.168.180.88/255.255.255.0/pub
srvctl modify nodeapps -n rachost2 -A 192.168.180.89/255.255.255.0/pub
I then stopped the services.
C:\oracle\product\10.2.0\crs\BIN>crs_stop -all
Attempting to stop `ora.rachost1.gsd` on member `rachost1`
Attempting to stop `ora.rachost1.ons` on member `rachost1`
Attempting to stop `ora.rachost2.gsd` on member `rachost2`
Attempting to stop `ora.rachost2.ons` on member `rachost2`
Stop of `ora.rachost1.gsd` on member `rachost1` succeeded.
Stop of `ora.rachost2.gsd` on member `rachost2` succeeded.
Stop of `ora.rachost1.ons` on member `rachost1` succeeded.
Stop of `ora.rachost2.ons` on member `rachost2` succeeded.
I restarted the services.
C:\oracle\product\10.2.0\crs\BIN>crs_start -all
Attempting to start `ora.rachost1.vip` on member `rachost1`
Attempting to start `ora.rachost2.vip` on member `rachost2`
Start of `ora.rachost1.vip` on member `rachost1` succeeded.
Start of `ora.rachost2.vip` on member `rachost2` succeeded.
Attempting to start `ora.rachost1.gsd` on member `rachost1`
Attempting to start `ora.rachost1.ons` on member `rachost1`
Attempting to start `ora.rachost2.gsd` on member `rachost2`
Attempting to start `ora.rachost2.ons` on member `rachost2`
Start of `ora.rachost2.gsd` on member `rachost2` succeeded.
Start of `ora.rachost1.gsd` on member `rachost1` succeeded.
Start of `ora.rachost1.ons` on member `rachost1` succeeded.
Start of `ora.rachost2.ons` on member `rachost2` succeeded.
I checked the status, and I noticed the changes "took".
C:\oracle\product\10.2.0\crs\BIN>crs_stat -p ora.rachost1.vip
NAME=ora.rachost1.vip
TYPE=application
ACTION_SCRIPT=C:\oracle\product\10.2.0\crs\bin\racgwrap.bat
ACTIVE_PLACEMENT=1
AUTO_START=1
CHECK_INTERVAL=60
DESCRIPTION=CRS application for VIP on a node
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
HOSTING_MEMBERS=rachost1
OPTIONAL_RESOURCES=
PLACEMENT=favored
REQUIRED_RESOURCES=
RESTART_ATTEMPTS=0
SCRIPT_TIMEOUT=60
START_TIMEOUT=0
STOP_TIMEOUT=0
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=pub
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=255.255.255.0
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=192.168.180.88
C:\oracle\product\10.2.0\crs\BIN>crs_stat -p ora.rachost2.vip
NAME=ora.rachost2.vip
TYPE=application
ACTION_SCRIPT=C:\oracle\product\10.2.0\crs\bin\racgwrap.bat
ACTIVE_PLACEMENT=1
AUTO_START=1
CHECK_INTERVAL=60
DESCRIPTION=CRS application for VIP on a node
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
HOSTING_MEMBERS=rachost2
OPTIONAL_RESOURCES=
PLACEMENT=favored
REQUIRED_RESOURCES=
RESTART_ATTEMPTS=0
SCRIPT_TIMEOUT=60
START_TIMEOUT=0
STOP_TIMEOUT=0
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=pub
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=255.255.255.0
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=192.168.180.89
Configuration Assistant
Virtual Private IP Configuration Assistant
I keep getting "OUI-25031"
I am not sure why this is not working.

JBO-25014: Another user has changed the row with primary key oracle.jbo.Key

Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
     OperationBinding operationBinding = bindings.getOperationBinding("Commit");
    Object result = operationBinding.execute();
   if (!operationBinding.getErrors().isEmpty())
    return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
    System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
        DCBindingContainer bindings =
       (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding operation =
        bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
        operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.

What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh

Monitoring changes in Oracle Database with Business Objects

Hi: I need to know if there is a Business Objects tool that allows me to be constantly checking one Oracle database to see if there are changes. The customer is not permitted to access the database, only has enabled a stored procedure that returns a string value if there are changes or not. That string (XML) is performed by DataServices later with BO to generate something. I would like to know if there is any product of BO (Data Integrator, etc ...) that allows me to take an active process of consultation on the Stored Procedure and that the consultation is launched every 10-15 seconds.
Thanks in advance
Santi

Yes I am using Generic ODBC connection and it goes fine till the authentication even it is showing me schema tables, but when I try to fetch any table columns or try to view table values it goes stuck or give me error.
Can you please guide me in detail how I can turn off advance features and what values should I put in Array Size, etc.
Regards,
Danish Baig.

Change charset in Oracle 10g XE

How do I change the charset to WE8ISO8859P1 in Oracle 10g XE ?
thanks in advanced

How do I change the charset to WE8ISO8859P1 in Oracle 10g XE ?Not easily.
Change to what?

Oracle report-how to change report layout to landscape?

Hi,
I am using Oracle report 6i. I want to change the report layout to Landscape. I had tried to go to 'page setup' and changed to 'landscape', but when I print, I still got portait layout.
Can anyone help me? Thanks.
Jun

Hi,
Easiest method for changing your reports orientation to Landscape is
Go to object navigator->System parameters->Orientation.
Set value of this system parameter as Landscape. Thats all. You also can set this property using srw. features at runtime.
Regards
Santa

Change Data Capture (CDC) for Oracle by Attunity on SQL Server 2014

hi
i've installed the above on my server. It seems to look fine. The connection to oracle database is set, the databases on the sql server side have been created; the tables to be captured are created. When i make a change on the oracle side, the configuration
ui senses the change, but no data is moved over. Silly question, do i have to move the data from oracle to sql server FIRST before any of this will work? and how do inserts work if the data has to be moved over to sql server first? I'm missing something here
Any help would be appreciated.
thank you

Well, better ask the vender. They haver their own forums.

Is it possible ?Change data capture from VSAM , DB2 , SQL Server to Oracle

Dear Professionals ,
We plan to build a warehouse project.Source systems are
* VSAM files in zOS
* SQL Server
* DB2
Warehouse database is Oracle .
Every night the changes in the source systems will be applied to Oracle warehouse DB.
But only the changes will be applied . Exporting VSAM files to flat file and load to oracle and find the data differences in Oracle is not accepted. Or moving the entire tables to oracle and finding the changes in oracle is not accepted.Only the changes will pass through the network .
Is "Oracle Connect" and "VSAM adaptor" capable of this ?
Is there a solution for SQL Server and DB2 change data capture ?
Is it Possible ? If possible is it a headache or a simple install and forget process?
Thank you
Bunyamin..

Bunyamin,
I do not know about VSAM, but I heard/read that Oracle Data Integrator is able to do change data capture on several databases. It uses the source database mechanism to do CDC. So maybe give it a try at the fusion middleware forum where ODI is being discussed

Change in Oracle Parameters and Log file size

Hello All,
We have scheduled DB Check job and the log file showed few errors and warnings in the oracle parameter that needs to be corrected. We have also gone through the SAP Note #830576 Oracle Parameter Configuration to change these parameters accordingly. However we need few clarifications on the same.
1.Can we change these parameters directly in init<SID>.ora file or only in SP file. If yes can we edit the same and change it or do we need to change it using BR tools.
2.We have tried to change few parameters using DB26 tcode. But it prompts for maintaining the connection variables in DBCO tcode. We try to make change only in default database but it prompts for connection variables.
Also we get check point error. As per note 309526 can we create the new log file with 100MB size and drop the existing one. Or are there any other considerations that we need to follow for the size of log file and creating new log file. Kindly advise on this. Our Environment is as follows.
OS: Windows 2003 Server
DB: Oracle 10g
regards,
Madhu

Hi,
Madhu, We can change oracle parameters at both the levels that is init<SID> as well as SPFILE level.
1. If you do the changes at init<SID> level then you have to generate the SPFILE again and then database has to be restarted for the parameters to take effect.
If you make the changes in SPFILE then the parameters will take effect depending on the parameter type whether it is dynamic or static. You also need to generate the PFILE i.e init<SID>.ora
2. If possible do not change the oracle parameters using the tcode. I would say it would be better if you do it via the database and it would be much easier.
3. Well its always good to have a larger redo log size. But only one thing to keep in mind is that once you change the size of the redolog the size of the archive log also changes although the number of files will decrease.
Apart from that there wont be any issues.
Regards,
Suhas

Oracle 11.1.0.6.0 db_block_size change

Similar Messages

Maybe you are looking for