Oracle 11.2 failsafe

Dear Experts,
I am looking for Ora 11g fail safe. In SAP Market place I found DVDs for Oralce 11 G and for Oracle client 11.2 but Oracle failsafe was not there.
Can anyone tell me where can I find DVD for Ora 11 g failsafe.
Thank you in advance.
Regards,

Hi,
Look for the information below
Oracle RDBMS 11.2 Windows DVD (#51038964) (X86_64) including Oracle Failsafe Version 3.4.2. The DVD is also available at http://service.sap.com/swcenter-3pmain -> Oracle -> Oracle Software 11.2 64 Bit (in the right frame) -> Installation -> Windows Server -> Oracle
Have a look into SAP note 1478060 - Oracle 11g Support on Windows: SAP NW 7.<x>-Based Systems
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • Oracle on windows cluster, with failsafe installed. Can it be switched live

    Hi all
    We have a oracle database, 10.2.0.4, installed on a 2 node Windows cluster (2003 R2 64 bit). Only one node is the active node. On top of this Failsafe is installed.
    Oracle is used for SAP.
    Normally when I need to switch the Oracle database from node1 to node2 I follow this procedure:
    1 bring down SAP
    2 set the database offline
    3 switch the Oracle database using failsafe
    4 set the database online
    5 start sap
    Being a hospital we just want to have SAP up all the time, this procedure only takes 20 min but I wondered if the switch could be done live
    So just go into the failsafe manager and switch, (won't do it in prime time of course)
    Can this live switch result in a corrupt database?
    Thanks for replying

    Hi,
    to do it really life you need another technology than a "failover cluster". You can use RAC for this.
    A failover cluster itself needs to be sure that the stack is down, before bringing it up on the other side. If not this can leed to corruptions... (though Oracle will try to prevent them in most cases)...
    Regards
    Sebastian

  • Oracle Clustre, Oracle Cluster with RAC and Oracle 10g

    Is there a difference between Oracle Cluster and Oracle Cluster with RAC? Please explain. Do existing database codes run unmodified in Cluster or Cluster with RAC environment? What needs to be modified to make existing SQL codes RAC-aware. How to achieve 'all automatic' in case of failure and resubmission of Queries from failed instance to a running instance?
    In 10g environment, do we need to consider licensing of RAC as a separate product? What are additional features one derives in 10g that is not in Cluster +RAC?
    Your comments and pointers to comparison study and pictorial clarification will be very helpful.

    Oracle cluster like failsafe before or Veritas Cluster or other vendor's cluster is meant for HA (high availability) purpose. Which 2 nodes or more can see a shared disk with 1 active node. Whenever this active node failed through heartbeat other machine will know and will take the database over from there.
    Oracle RAC is more for HA and load balance. In Oracle RAC 2 or more nodes are accessing the database at the same time so it spread load across all these nodes.
    I believe Oracle 10g RAC still need seperate license for it. But you need to call Oracle or check the production document to verify it.
    Oracle 10g besides improvement in RAC. It's main improvement is on the build in management of the database itself. It can monitored and selftune itself to much furthur level then before and give DBA much more information to determine the cause of the problem as well. Plus improvement on lots of utility as well like RMAN , data pump etc... I don't want to get into too much detail on this you can check on their 10g new features for more detail view.
    Hope this help. :)

  • Unable to add database (11g) in Oracle Failsafe (v3.4.2)

    While trying to add Database in Oracle Failsfafe, I am receiving following errors:
    FS-10376: Node1 : Starting configuration of resource DB_SID
    FS-10378: Node1 : Preparing for configuration of resource DB_SID
    FS-10380: Node1 : Configuring virtual server information for resource DB_SID
    FS-10496: Generating the Oracle Net migration plan for DB_SID
    ** ERROR : FS-10094: Failed to retrieve Oracle Net listener (OracleOraDb11g_home1TNSListenerName) information from persistent cluster registry for group Cluster_group
    18 09:15:12 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource DB_SID

    Oracle Failsafe version: *3.4.2.3*
    Oracle Databsae version:*11.2.0.3*
    OS Version: Windows Server 2008 64-bit

  • Error in Verify Cluster of Oracle FailSafe Manager

    Hello,
    I am doing SAP ERP6.0 installation on MSCS cluster environment. I have finished the following steps
    ASCS Installation,First MSCS Node Configuration,Database Instance Installation,Additional MSCS node configuration, Enqueue Replication Server Installation and Central Instance Installation.
    I am now creating the Oracle FailSafe Group on the MSCS node which has the quorum resource in my case the DB node.
    After adding the Cluster when I click on Verify Cluster I get error. Below is the VerifyCluster log
    1   15:06:04  Starting clusterwide operation
    2   15:06:04   > FS-10998:
    3   15:06:04  FS-10500: POPWRMSSAPDB : Starting verification of cluster PWRCLUS01
    4   15:06:04   > FS-10998:
    5   15:06:04  FS-10544: POPWRMSSAPDB : Verifying the cluster quorum resource
    6   15:06:04   > FS-10545: Cluster quorum resource QUORUM is located at Q:\Cluster\
    7   15:06:04   > FS-10998:
    8   15:06:05    ** ERROR : 0x80010105: The server threw an exception.
    9   15:06:05    ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
    10  15:06:06  The clusterwide operation failed !
    Kindly suggest what action should I take to resolve this error.
    Regards
    Mitesh Nair

    Hi and welcome to the forums!
    Here are some possible reasons and resolutions.
    Let us know how it goes!
    Thanks,
    Bifocals
    KB28396 When installing the BlackBerry Desktop software the following error is received "The installation files cannot be validated. Please verify the installer package and try again."
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Problem in adding database to a cluster group in Oracle failsafe

    Hi,
    I am using WIndows Server 2003 Enterprise edition 64 bit to configure Oracle failsafe 3.4.2 on 2 node cluster. Oracle version is 10.2.0.3.
    Verify cluster and Verify standalone database went fine without any error but when I try to add my database to cluster group, it fails with following errors.
    ==============
    30 08:07:10 > FS-10426: Adding the database resource TESTDB.WORLD to group TESTDB
    31 08:07:10 FS-10382: node2 : Bringing resource TESTDB.WORLD online
    32 08:07:34 ** ERROR : FS-10726: Resource TESTDB.WORLD is in a failed state
    33 08:07:34 ** ERROR : FS-10012: Failed to bring the cluster resource TESTDB.WORLD online. Check the Windows event log for messages
    34 08:07:34 ** ERROR : FS-10782: The Oracle Database resource provider failed to bring resource TESTDB.WORLD online
    35 08:07:34 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    36 08:07:34 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    ==========
    I checked widows event viewer (application log) and it is showing following error.
    source: OracleMSCSServices
    Description: Oracle failsafe resource TESTDB.WORLD failed to start.
    FS-10999: An internal programming error has occured.
    ============
    windows event viewer (system log) shows following error
    Source:CLUsSvc
    EventID: 169
    Description: Cluster resource TESTDB.WORLD in resource group TESTDB failed.
    ==================
    I applied Oracle failsafe patch 3.4.2.1 as well but it didn't work.
    Please help.
    Thanks,
    Abhi

    Hi Abhi,
    i've actual the same problem on Fail safe 3.4.2 and oracle 10.2.0.4.
    Do you have a solution by now?!
    Regards,
    Michael

  • Oracle 8i Failsafe, Windows 2000, AWE_WINDOW_MEMORY key

    Issue: Upgrading the Physical memory on the Windows 2000 Advanced server running Oracle 8.1.7.4.1 to 8GB.
    With ref. to metalink Doc ID: Note:225349.1
    I understand, it is required to tweak the OS and Oracle 8i to an extent, in order to take advantage of the additional memory.
    The following are the changes I am planning in order to have a successful transition.
    - Adding the /PAE switch to the boot.ini file.
    - Adding USE_INDIRECT_DATA_BUFFERS=TRUE parameter to the init.ora file.
    - Setting DB_BLOCK_BUFFERS = 512000 in the init.ora file.
    - Setting DB_BLOCK_LRU_LATCHES = 64 in the init.ora file.
    - Setting SHARED_POOL_SIZE = 300M in the init.ora file.
    - Adding the registry key AWE_WINDOW_MEMORY with a value equal to 4Gb. (HKLM\Software\Oracle\Homex)
    Since this is a failsafe setup, we have multiple homes that showup in the registery (HKLM\Software\Oracle\Homex). I have HOME0 thro HOME3 on both the nodes fo the cluster.
    My question is, to which home do i add the AWE_WINDOW_MEMORY key ?
    Thanks
    Shashi

    Dear alanm.
    Thanks for your reply.
    Is your machine 32-bit based windows or 64-bit based?
    You have set "4GT" with /3GB option.
    Is it possible to set AWE_WINDOW_MEMORY over 3Giba bytes on 32-bit windows?
    Best Regards.
    Message was edited by:
    user507290

  • Configure OEM on Oracle Failsafe 3.4.2 (11g R2) on windows 2008

    Hi Friends,
    Please let me know how to configure Oracle Enterprise Manager(OEM) On Oracle Failsafe 3.4.2 (11g R2 Database) on windows 2008.
    I found a Metalink Note : 396659.1 but i am unable to open the Note.
    Please provide the Proper Note.
    Regards,
    DB

    I have the same problem.
    My solution is:
    1.add OFS group name mapping VIP in DNS
    2.add VIP in MSCS manager
    3.delete VIP in OFS manager
    4.add VIP in OFS manager

  • Oracle softwares for oracle failsafe 10g

    Hi experts
    What softwares are required to setup oracle failsafe on 10g in windows 2003
    Is there separate liecense and instalables for oracle failsafe?
    Please suggest.
    Thanks In advance

    Hi,
    Refer to : http://www.oracle.com/technetwork/database/windows/index-082893.html
    Oracle provided the needed information. Just spend some time.
    Refer to ; http://download.oracle.com/docs/html/B12070_01/intro.htm
    - Pavan Kumar N
    Edited by: Pavan Kumar on Apr 11, 2011 12:43 PM

  • Oracle FAILSAFE and CVE-2012-1675

    Folks,
    I'm running Oracle 10.2.0.3 {PATCH 29} on Windows32 with Oracle Failsafe 3.4.4.1. I've tried implementing the IPC fix and the dynamic_registration=OFF fix as prescribed and get the listener.log error listed below with either attempt. It doesn't look like either fix works for FAILSAFE.
    +07-MAY-2012 15:00:07 * service_register_NSGR * 1194+
    TNS-01194: The listener command did not arrive in a secure transport
    How do I implement this fix on my environment?
    Any and all help is GREATLY APPRECIATED!

    Hello;
    Did you do this ? :
    Plus for each database
    alter system set local_listener='(DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=REGISTER)))' scope = both;
    "With COST enabled for TCP attempts to register with the listener from anything other than the local system using TCP is rejected and an event is logged"
    TNS-01194
    Might look at these as an option :
    How to Add New Listeners in a Fail Safe Environment [ID 217096.1]
    How to protect a listener with a password in Oracle Fail Safe? [ID 333239.1]
    Best Regards
    mseberg
    Edited by: mseberg on May 7, 2012 12:36 PM
    Edited by: mseberg on May 7, 2012 12:45 PM

  • HELP! Oracle FailSafe - Listener fails when adding standalone database

    Well, I have a cluster of two nodes with the following specs:
    (1) an Oracle 10g database each
    (2) Microsoft Cluster Service (MSCS)
    (3) Windows Server 2003 64-bit edition
    (4) Intel Itanium Processor
    (5) Oracle Failsafe 3.3.3 for Windows 2003 64-bit
    The 64-bit Oracle Failsafe doesn't come with Oracle Failsafe Manager, so I used a Failsafe Manager remotely from another clustered servers. The version is also 3.3.3, but it's running on a Windows 2000 Advanced Server.
    Well, after connecting to the 64-bit cluster, I added the standalone database to a Cluster Group. There are two cluster groups on the Server:
    (1)"Cluster Group" (the default cluster group created by MSCS); containing an IP address, a network name, Oracle Cluster Services, and the Quorum hard drive.
    (1)"ORACLE DB" A cluster gropu I created for the database; containing another IP address, a network name for the IP address, and every hard drive volumes of the database files.
    The database currently resides on the Node 2 (because I created it there). I have successfully verified the database (using "Verify Standalone Database" option). BUT when I added the database into the cluster group ORACLE DB, it failed with the following message:
    23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
    When I opened the Windows Event Viewer, apparently the Listener Service had started, but it soon "terminated unexpectedly":
    At first, the Listener Service appeared to be started:
    But this is what happened next; it seemed the Listener Service terminated abruptly after entering the running state for a very short time:
    What happened? What should I do? What is the problem? Many thanks!
    PS: the following are the messages from both Verifying Standalone Database and Adding Standalone Database. The verification was successfull, but I just failed to add the database:
    >
    Versions: client = 3.3.3 server = 3.3.3 OS =
    Operation: Verifying standalone database "PAYMENT"
    Starting Time: May 11, 2005 19:50:11
    Elapsed Time: 0 minutes, 4 seconds
    1 19:50:11 Starting clusterwide operation
    2 19:50:11 FS-10915: POSDB2 : Starting the verification of standalone resource PAYMENT
    3 19:50:11 FS-10371: POSDB2 : Performing initialization processing
    4 19:50:11 FS-10371: POSDB1 : Performing initialization processing
    5 19:50:12 FS-10372: POSDB2 : Gathering resource owner information
    6 19:50:12 FS-10372: POSDB1 : Gathering resource owner information
    7 19:50:12 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
    8 19:50:12 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
    9 19:50:12 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
    10 19:50:12 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
    11 19:50:12 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
    12 19:50:12 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
    13 19:50:12 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
    14 19:50:12 FS-10916: POSDB2 : Verification of the standalone resource
    15 19:50:12 > FS-10341: Starting verification of database PAYMENT
    16 19:50:13 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
    17 19:50:13 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
    18 19:50:13 > FS-10491: Configuring the Oracle Net service name for PAYMENT
    19 19:50:13 > FS-10343: Starting verification of database instance information for database PAYMENT
    20 19:50:13 >> FS-10347: Checking the state of database PAYMENT
    21 19:50:13 >> FS-10425: Querying the disks used by the database PAYMENT
    22 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
    23 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
    24 19:50:15 FS-10917: POSDB2 : Standalone resource PAYMENT was verified successfully
    25 19:50:15 FS-10378: POSDB1 : Preparing for configuration of resource PAYMENT
    26 19:50:15 FS-10916: POSDB1 : Verification of the standalone resource
    27 19:50:15 > FS-10341: Starting verification of database PAYMENT
    28 19:50:15 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
    29 19:50:15 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
    30 19:50:15 > FS-10491: Configuring the Oracle Net service name for PAYMENT
    31 19:50:15 > FS-10343: Starting verification of database instance information for database PAYMENT
    32 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
    33 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
    34 19:50:15 FS-10917: POSDB1 : Standalone resource PAYMENT was verified successfully
    35 19:50:15 The clusterwide operation completed successfully, however, the server reported some warnings.
    >
    Versions: client = 3.3.3 server = 3.3.3 OS =
    Operation: Adding resource "PAYMENT" to group "ORACLE DATABASE"
    Starting Time: May 11, 2005 20:48:43
    Elapsed Time: 0 minutes, 7 seconds
    1 20:48:43 Starting clusterwide operation
    2 20:48:44 FS-10370: Adding the resource PAYMENT to group ORACLE DATABASE
    3 20:48:44 FS-10371: POSDB2 : Performing initialization processing
    4 20:48:44 FS-10371: POSDB1 : Performing initialization processing
    5 20:48:45 FS-10372: POSDB2 : Gathering resource owner information
    6 20:48:45 FS-10372: POSDB1 : Gathering resource owner information
    7 20:48:45 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
    8 20:48:45 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
    9 20:48:45 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
    10 20:48:45 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
    11 20:48:45 >>> FS-10652: POSDB2 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
    12 20:48:45 >>> FS-10652: POSDB1 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
    13 20:48:45 FS-10376: POSDB2 : Starting configuration of resource PAYMENT
    14 20:48:45 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
    15 20:48:46 FS-10380: POSDB2 : Configuring virtual server information for resource PAYMENT
    16 20:48:46 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
    17 20:48:46 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
    18 20:48:46 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
    19 20:48:46 > FS-10490: Configuring the Oracle Net listener for PAYMENT
    20 20:48:46 >> FS-10600: Oracle Net configuration file updated: F:\ORACLE\PRODUCT\10.1.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
    21 20:48:46 >> FS-10606: Listener configuration updated in database parameter file: H:\PAYMENT\admin\pfile\pfilePAYMENT.ora
    22 20:48:47 >> FS-10605: Oracle Net listener Fslpos created
    23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
    24 20:48:48 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
    25 20:48:48 > FS-10090: Rolling back Oracle Net changes on node POSDB2
    26 20:48:50 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource PAYMENT
    27 20:48:50 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
    28 20:48:50 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
    29 20:48:50 FS-10488: POSDB2 : Starting rollback of operation
    30 20:48:50 FS-10489: POSDB2 : Completed rollback of operation
    31 20:48:50 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
    32 20:48:50 Please check your Windows Application log using the Event Viewer for any additional errors
    33 20:48:50 The clusterwide operation failed !

    umm... help? Anyone?

  • What is failsafe in oracle ?

    Hi all
    What is failsafe in oracle. what is purpose . Does any one have a document for installating oracle failsafe
    Regards
    Suresh

    What is the difference between the General Database Discussions and the Community Feedback and Suggestions (Do Not Post Product Related Questions Here) forums?

  • Oracle failsafe

    I am using 3.1.2 and I want to upgrade to 3.3.1. I can't find this product in the download list. From where can I download it.

    Thanks for pointing it out.. you can get the download at: http://otn.oracle.com/software/tech/windows/failsafe/content.html
    Regards,
    OTN Team

  • Is possible Oracle Database on Windows Cluster without FailSafe ???

    Hi Guys,
    I have one doubt that can we have Active/Passive Oracle Database on Windows (2k3/2k8) Cluster without installing FailSafe Software ???
    Can we have the .bat Scripts for resource moving from Active Node to Passive Node in case of failure, like the way we have in Unix environments...
    yours feedback would be appreciated...
    Regards,
    Manish

    user12273645 wrote:
    Hi Anand,
    Can we create a oracle service for already running database? If so can you please guide me how to perform.
    Thanks,
    DasarathIf your service does not exists or not running its mean your database actually is not running.Create new service using oradim for example
    C:\Documents and Settings\chinar>set ORACLE_SID=SB
    C:\Documents and Settings\chinar>oradim  -new -sid SB -intpwd sm -pfile D:\oracl
    e\product\10.2.0\admin\SB\pfile\init.ora.51200910857
    Instance created.
    C:\Documents and Settings\chinar>sqlplus "sys/sm as sysdba"
    SQL*Plus: Release 10.2.0.2.0 - Production on Fri Aug 27 10:57:55 2010
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    SQL> startup pfile=D:\oracle\product\10.2.0\admin\SB\pfile\init.ora.51200910857
    ORACLE instance started.
    Total System Global Area  159383552 bytes
    Fixed Size                  1288292 bytes
    Variable Size              62916508 bytes
    Database Buffers           88080384 bytes
    Redo Buffers                7098368 bytes
    Database mounted.
    Database opened.
    SQL>

  • Oracle FailSafe on Windows Cluster - Oracle Service Question

    I'm running DB10G R2 on a 2 node Windows 2003 Server cluster.
    I have configured Oracle FailSafe and the failover 'appears' to be working correctly but I'm confused as to what/how the DB service works.
    When I switch between nodes the OracleService<SID> remains at Started on the node I'm switching from, the service on the newly 'active' node never starts. Is this expected behaviour?
    The database is accessible from the clients but I'm guessing (am unable to test/prove) that if I power down node1 it won't be.

    Why can't you test/prove what happens when you power down node1? A critical part of every cluster implementation should be to perform failure testing.
    It's been a while since I've worked with Failsafe, but I do remember that all management is performed through the cluster manager application (can't remember what it is called exactly--the MSCS cluster admin tool). You shouldn't have to worry about the services. You should be able to relocate the database, it's storage (drives) and its associated IP address to the other cluster node and verify via the MSCS app that all services are running on that other node. At that point, the original node (node1 in this case) can be powered off, rolled out of the building, whatever you want--database should remain available on node2.
    Dan

Maybe you are looking for