Oracle 11.2 installation on solaries 64bit

Hi
I am try to install oracle 11.2 on laptop with solaries 10(64bit) vmware meachine and my laptop os is XP 32 bit.
But every time i run runinstaller it give errors.I am installing oracle 11g on 64bit because oracle 11g is not avaliable for 32bit os.Please provide me solution.
Thanks

Hi;
Yes correct
donwload 32 bit linux+32 bit oracle setup for your installation
PS: somehow i cant type message!when i use poster message on my post than press save message it gives IE error!Anyone face this issue?
Regard
Helios
Edited by: Helios- Gunes EROL on Mar 22, 2011 2:59 PM

Similar Messages

Oracle 11g client installation on Solaris in non GUI mode

Hi,
I want to know if there is a way i can install Oracle 11g client on Solaris 10 machine in non GUI mode (ie. i want to do it from a command based terminal)
Thanks
Anup

Hi Anup
You have two ways to install it
1) Client installation without response file
Please Refer to Doc ID 885643.1
2) With Response file
Refer to the document available in Document library
Document Oracle® Database Client Installation Guide
11g Release 2 (11.2) for Solaris Operating System
Note: from 11gR2 onwards you can create a response file from GUI also and then use it later on for silent installation.
Hope this is helpful for You
Regards
Sudhir
Edited by: user13090769 on Sep 1, 2010 10:55 AM
Edited by: user13090769 on Sep 1, 2010 10:56 AM

Oracle Service Bus Installation on Windows 64bit Professional

Its 28th July 2012, I have been unable to get the OSB platfomt running on my new Windows 7 Laptop. Keep getting the "The selected wizard could not be started.
Plug-in "com.bea.alsb.ui" was unable to instantiate class "com.bea.alsb.ui.wizards.NewALSBContainerWizard. com/bea/alsb/core/containers/exceptions/ContainerException" error while attempting to create a new OSB project from my Eclipse Helios. I have installed OSB 11.1.14, OEPE 11.1.1.6.1 and wls1036_generic but I haven't been able to get the IDE working!
Can anyone tell me the right combination of OSB, OEPE and wls generic installer that really works!........ I would pretty much appreciate and advice that works!..Thanks!

Hi,
OSB is not certified on Windows 7 according to certification matrix...
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It maybe possible to get it running with some workarounds...
Have you seen this thread?
Installation - OSB in 64bit windows 7
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Oracle Developer 6 installation with Solaris

I've an application made with Developer 6 and the Oracle DataBase Server version is the 8. My question is, is this configuration compatible with os Solaris 10? Or there is any problem that obliges me to use earlier versions of Solaris?
Thanks in advance.
Mabel

The last 6i version, which WAS supported, is 6.0.8.25.2 Patch 16 for 8i on Solaris 9.
Werner

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Installation problem of Oracle 8.1.7 on solaris 10 x86

Hi,
I tried to install the Oracle 8.1.7 on solaris 10 x86 and I got an error message shows: "cannot write to /opt/oracle/product/8.1.7/jar/classes2.jar".checking the log it shows:
Exception: IOException2
and exception: copyGroupFromJar. I ignored the error but the installation failed.By the way, I was not asked to run root.sh during the installation. Can anyone kindly tell me how to make it?
yours
zeushd

Here are some additional statements for 10g on Solaris 10g x86:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

SOS........installation problem. Oracle 8.1.5 on Solaris 2.6

Hi all,
I am in the process of installing Oracle 8.1.5 on Solaris 2.6.
While installing Oracle, it gives the following error and abruptly stops installation.
java.lang.ClassNotFoundException : OiQueryFileRes occurred..
I have intstalled 105181-23 kernel update patch and ORCLudlm package which is provided in in oracle cd.
I will deeply appreciate your ideas.
Thanks,
Raghu.

Hi all,
I hope I am not alone in facing this problem.
Would greatly appreciate any suggestions from you.
Thanks,
Raghu.

Oracle 11g Installation on SOlaris 5.10

Hi ,
First i am going to install oracle 11g on solaris 5.10 . Could some one tell me what are the requirements required if not please send me the better link which i can follow for my installation ...

Follow the Oracle Installation Documentations.
"Oracle® Database Quick Installation Guide
11g Release 1 (11.1) for Solaris Operating System"
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313.pdf
Oracle® Database Installation Guide
11g Release 1 (11.1) for Solaris Operating System
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068.pdf
Regards,
Sabdar Syed.

Oracle 8i,9i,10g installation on Solaris 8

Hi all,
how to install oracle 8i, 9i,10g on Solaris 8.
what are the pre requisites ?
what are the post installation steps ?
please help me ....
Regards,
kk.

user603328 wrote:
Hi all,
how to install oracle 8i, 9i,10g on Solaris 8.
what are the pre requisites ?
what are the post installation steps ?
please help me ....
Regards,
kk.Check the following link to learn how to install Oracle 11g on Solaris:
http://download.oracle.com/docs/cd/E11882_01/install.112/e17163/toc.htm
Kamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

Installation of oracle 10g rac on open solaris for X86 Machine

Hi
Can you please let me know the advantages of installation of oracle 10g rac on open solaris on x86 machine.And also let me know the detail steps involved in instatllation of oracle 10g rac on open solaris on x86. please suggest the recommdendation for the installation
Thanks
Saiprasath

If by "advantages of installation of oracle 10g rac on open solaris on x86 machine" you mean advantages over RAC on Linux or AIX or HP/UX there aren't any.
If you want to know the advantages of RAC over stand-alone they generally relate to:
1. Eliminating the server as a single point of failure
2. Transparent fail-over
2. Incremental horizontal scalability

Oracle DB 11g Release 2 Installation in Solaris OS for SAP - issue: Files not found

Hello All,
Having problem during my installation of oracle DB.
the installer keeps on prompting that files not found and the directories and files permission seems different from expected
I attached the images of the files the installer is looking for and also the /oracle/<SID>/11ginstall_11202.log
I also attached the thing i put in ENV command
Not sure if its the issue in the oracle profile or installer itself or wrong input
please help

Hi Frogoso,
Please have a check on the known issues SAP note for Oracle installation.
Section G: is related to Solaris
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
You may re-check whether all the Solaris related pre-requisites are met before executin RUNINSTALLER.
Suggestion here would be to go with latest available Oracle patch 11.2.0.4 as you are installing a new system.
Hope this helps.
Regards,
Deepak Kori

BS 2005 SR3 Installation Master Solaris on x64 64bit

Hi,
According to the SAP's Product Availability Matrix, DB2 is a supported database for installing SAP Netweaver 7.0, however when using the sapinst in BS 2005 SR3 Installation Master Solaris on x64 64bit, there is no option to select DB2 as the database.
Does anyone know if there is a workaround or another Installation Master that we can use for this?

Hi Setu,
Which DB2 version are you using ?
If it is DB2 V9.5 then check SAP Note 1089578 - DB6: Using DB2 Version 9.5 with SAP Software
Thanks
Sunny

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

Oracle 11.2 installation on solaries 64bit

Similar Messages

Maybe you are looking for