Oracle 11G database and Application Server installed on same server

What are the pros and cons installing Oracle 11G database and Oracle Application Server (Forms and Reports) on the same server?
Thank you in advance, Sonya

Some may want their data in a separate network zone for security reasons.
It also depends if it is the same people that do maintenance on db and appserver.
It is lower cost with one server, and only 1 Os to set up.

Similar Messages

  • Can we run 11g RAC and 12c RAC in the same server?

    There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
    Current setup:
    HP-unix 3 node RAC on 11g R2
    4CPU
    64 GB RAM
    3 TB SAN storage
    no ASM
    Upgrade setup:
    HP-unix 3 node RAC on 12C RAC
    8CPU
    128 GB RAM
    6+ TB SAN storage
    ASM
    We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
    Thank you for your time!

    Hi,
    The following table shows you the compatibility between various versions:
    Clusterware
    ASM
    DB
    Certified
    12.1
    12.1
    12.1
    Y
    12.1
    12.1
    11.2(a)
    Y
    12.1
    12.1
    11.1(a)
    Y
    12.1
    12.1
    10.2(a)
    Y
    11.2
    11.2(b)
    11.2
    Y
    11.2
    11.2(b)
    11.1
    Y
    11.2
    11.2(b)
    10.2
    Y
    11.1
    11.1
    11.1(c)
    Y
    11.1
    11.1
    10.2
    Y
    11.1
    11.1
    10.1
    Y
    11.1
    10.2
    11.1
    Y
    11.1
    10.2
    10.2
    Y
    11.1
    10.2
    10.1
    Y
    11.1
    10.1(d)
    11.1
    Y
    11.1
    10.1(d)
    10.2
    Y
    11.1
    10.1
    10.1
    Y
    10.2
    10.2
    10.2
    Y
    10.2
    10.2
    10.1
    Y
    10.2
    10.1(d)
    10.2
    Y
    10.2
    10.1
    10.1
    Y
    10.1
    10.1
    10.1
    Y
    (a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
    Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

  • Can I install 9i database  and  9i AS on the same server ?

    Dear Forum,
    We need to install Oracle 9i database(9.2.0.1.0) 64-bits
    and Oracle 9i Application Server (9.0.2.0.1) on the same Server machine with the following features:
    Machine: SunFire 6800, 4 CPU, 8 GB RAM
    OS: Solaris 9 8/03
    Is it possible?
    Will we have problems or conflicts with the ports numbers?
    Please, any aditional comments or recommendations will be welcome!!!!
    Best regards,
    Alfredo

    Hi Alfredo,
    If you are planning to install an infrastructure as part of your application server, you might run into a port conflict for the TNS listener. The easiest way of solving this is to move the non-infrastructure database listener to another port.
    A number of things like these are handled automatically in later releases. You do know that 9.0.2 is old and desupported, right?
    Regards,
    Mathias

  • Can database and application services install on two different OS?

    Hi All,
    Our customer want to install Oracle E-Business Suite 12 on two separate nodes, but both of nodes are running different OS. One node is Red Hat Linux which will be the database server, and the other node is Microsoft Windows 2003 which will be the application server. My questions are whether there will be a problem to communicate between the database server and application or whether there will be a problem to do the configuration for them to work. Please help me on these questions.
    Thank you
    Lin

    I agree with Fadi...As long as it's supported, you shouldn't have problems. Or at least, if you do have problems, Oracle will be able to help you. :-) Oracle does provide support for "split-tier" configurations, but you should confirm that the one you propose is a supported combination.
    I recommend checking the certification matrix on Metalink, and if that seems ambiguous, log an SR with Oracle Support for clarification.
    Regards,
    John P.

  • Oracle 11g Database Examples when to install Pre(or)Post DBUA?

    Hi Friends,
    I am performing Oracle DB Upgrade from 11.2.0.1 to 11.2.0.3
    I want to install Oracle 11g Examples also so when can i install it , Pre (or) Post DBUA (or) both are supported?
    Plan A:
    1) Install Oracle 11.2.0.3 on new home
    2)Install Oracle Database Examples 11.2.0.3 on the above home
    3)Invoke dbua to upgrade 11.2.0.1 Database
    (or)
    Plan B:
    1) Install Oracle 11.2.0.3 on new home
    2)Invoke dbua to upgrade 11.2.0.1 Database to 11.2.0.3
    3)Install Oracle Database Examples 11.2.0.3 on the above home
    4) Anything to be performed on the Database(like catpatch...) since examples is installed post DB upgrade?
    (or)
    Both Plan A and Plan B is supported
    Regards,
    DB

    Hi;
    1) Install Oracle 11.2.0.3 on new home (software only)
    2)Install Oracle Database Examples 11.2.0.3 on the above home
    3)Invoke dbua to upgrade 11.2.0.1 Database
    AFAIK you can also install it after upgrade
    Regard
    Helios

  • Mobile devlopment workstation and Mobile client install on same server

    Hi,
    Can we install Mobile development workstation and mobile client on same server?
    I have already installed mobile development workstation , but when i try to install mobile client on same server it says that add,remove ,modify option install screen. It lis not allowing me to enter new screen.
    Any idea.
    - tom

    When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
    If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
    You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
    Regards Kai

  • Apex 3.2 install in oracle 11g database

    hi,
    how to install oracle apex 3.2 in oracle 11g database and any other tool have like oracle query browusr (need to build a query drag and drop).
    regards
    den

    Den
    Oracle 11g comes with apex. You should refer to the documentation at...
    [http://www.oracle.com/technology/products/database/application_express/index.html]
    to install it.
    Please don't keep reposting the same question regarding the replacement for query browser, just update your original thread if you need further information.
    Regards
    Ben

  • Oracle 10g developer suite and oracle 11g database.

    Hi all,
    I have installed oracle 11g database and oracle developer suite 10g on Vista . I want to connect 11g database using oracle forms builder data block wizard to create forms. I'm new to oracle forms . I was just following some tutorial instructions and try to achieve it, but unable to connect 11g database. Can anyone help me out.
    I dont even know whether this is the right area to post this query as i cant find any developer tool installation guide questions.
    Thanks,
    Kalyan
    Edited by: user10676396 on May 6, 2009 7:37 PM
    Edited by: user10676396 on May 6, 2009 7:43 PM

    Hello Kalyan,
    A couple questions:
    1. Once you installed the 11G database, you did start the database services, yes?
    2. Do you have a properly configured TNSNAMES.ORA file that points to your database?
    3. You created a database that you are using and can access the database via SQLPlus?
    Don.

  • Oracle Tuxedo 8.1 With Oracle 11g Database

    Hi,
    I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
    We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
    what can be the solution for that problem?
    An Oracle 11g database config or a Tuxedo config ?

    Hi,
    When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • Displaying Chinese Character in Oracle Form 6i using Oracle 11g Database

    Hi,
    Please, can anyone send me the solution for displaying the Chinese characters in Oracle Form 6i using Oracle 11g database and also
    the configuration that has to be implemented.Its urgent.
    Thank You,
    Sridhar.T

    displaying the Chinese characters in Oracle Form 6i using Oracle 11g database I'm afraid you might have problems... see Implementing Chinese language in Oracle 11g

  • Diff between Oracle 9i database and 9ias application server.

    Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

    Hi,
    Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
    applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
    tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
    based applns, Wireless applns etc..)
    Cheers !
    -- Rajesh
    Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

  • Error while install oracle 11G forms and reports  -creating Reports  Server components error

    Hello,
    while install oracle 11G forms and report i face below issue on below step ( configuration step)
      >> creating Reports  Server components error
    [2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property  is not defined. isWebsphereEnabled=false
    [2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
    [2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

    Ram,
    You didn't read the response in your other thread.
    WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
    John

  • How to monitor oracle 11g database sessions on Windows 2008 server?

    Hi Experts
    How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.

    Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence.  i never tested it but seems impresive.  It is free and i think it would be use ful to you.
    http://myorasql.com/
    You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured .

  • What should i do with an Oracle 11g Database, MySQL database and a dump file.

    I just joining to a new work field, almost about a database and i know "NOTHING" about this field.
    My company has a system that running by Oracle Database, the problem is that Oracle Database will cost a lot of money when my company expands.
    So the quest is converting Oracle Database to MySQL database.
    Of course i cant try to convert it in the main Database, so i create one Oracle 11g Database on my LocalHost, and it already actived in " Localhost:1158 " etc.
    I have another Sever test that already set up MySQL database, and a dump file from the system.
    So I want to ask these 2 questions :
    1. How to create an new Oracle Database from that dump file ?
    2. Is it alright if i use tool to convert Oracle Database into MySql, or i should do it manually ?
    Thanks alot.

    I just joining to a new work field, almost about a database and i know "NOTHING" about this field.
    My company has a system that running by Oracle Database, the problem is that Oracle Database will cost a lot of money when my company expands.
    So the quest is converting Oracle Database to MySQL database.
    I predict that converting to MySQL will cost your company more as it expands. As you expand managing contention becomes more important - Oracle does this for you. I do not think MySQL does, so you'll have to write more code to deal with this, costing the company money. A big part of making application scalable and reliable is to use stored procedures, how good are MySQL's compared to PL/SQL's. What other features are there that MySQL has that will benefit your company that Oracle doesn't. What do you need to think about as your company expands that need to be taken care of in the database. I would have thought a migration from MySQL to Oracle would be more common to deal with expansion.
    As you know "NOTHING" you need to think about what each database can give you for the next 10 years to cope with you businesses potential requirements, and extimate how much it will cost to implement these requirements, then make the decision

  • Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install

    Platform: Windows Vista 64 Bit Version
    Downloaded: Oracle 11g Database 64 Bit
    Service Pack 1
    Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
    Thanks
    Preston
    System Integrator

    Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
    Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

Maybe you are looking for