Oracle 11G + Database Connection taking too much Time

Hi ,
I am using Oracle 11G . When i try to connect to oracle database
sqlplus system/impetus@database
it takes too much time ( more than 1 min )
I am not getting why this is happening ?
Before some day it was working fine but suddenly the problem occurred.. Is this issue is related to log files generated by oracle or memory related issue ( sga and pga)..
Any Help please ?

Darn! /tmp/capture.log does not contain what I expected it to contain.
So a different approach is needed.
issue the following command:
script /tmp/capture.log
#now you are in a new shell & issue the next 3 lines
strace sqlplus system/impetus@database
exit
Ctrl-d (Control D)
now issue the following commands.
ls -l /tmp/capture.log
wc -l /tmp/capture.log
Post the results from 2 commands above back here

Similar Messages

Import taking too much time in oracle 7i

Hi Guys
I am trying to import a table of around 9600000 rows. on oracle 7i it is taking too much time. any suggestion or way i can speedup the process?
Thanks in advance
Khurana

Ok.
Note that it is "_disable_logging" not "disable_logging", but I don't have an Oracle 7 database to confirm if it works.
Been a long time since I used Oracle 7. Any reason why you have not upgraded ? Import should be much faster with 11g ...
For further tuning you would need to look at OS and DB performance to find bottlenecks. E.g run bstat / estat.
Other things to look at are disk performance, increase db_block_buffers, increase db_writer etc.

Taking too much time (1min) to connect to database

Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
Naseer

Dear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C

Taking too much time and not connecting to ipad software server

taking too much time and not connecting to ipad software server and not updating.. why

because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

Taking too much time to connect SAP B1

Dear All,
My Addon is running successfully in one server. While the same Addon is taking too much time to connect ( near oCompany.Connect).
Can anyone give me any idea regarding this..
Thanks in advance..
Regards
Sanjay

Dear Petr,
Thanks for your answer.
Let me do the thing...
I will get back to you soon...
Thanks
Regards
Sanjay

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

BPC application is taking too much time to load

Hi experts!
I'm facing a very weird problem...
We've developed a BPC application (app name: USM).
This application is taking too much time to be loaded in some computers (around 8 minutes to load). Yes, in SOME computers.
There is around 100.000 registers in the database and most coming from material master data.
If I try to load this USM application in another computer, the process loads smoothly. The computer's hardware is all the same, the server is hyper estimated and everyone is in the same network.
I talked to infrastructure departament and we made several tests. We run BPC on the server (loaded quickly), on several computers (some loads quickly, others don't), used wireless and cable connection (got all the same result) and checked communication between BW and BPC but it is ok.
After all, I tried to load APSHEL application in the same enviroment and it loaded intantly. So, I guess it is something wrong with my application. But if was this, I suppose it should happen to all computers and not only with part of them.
Have anybody ever seen something like this?
Thank you in advance.
Rubens
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:43 PM
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:46 PM

Hi Rubens,
I would try making a couple of test:
1. I will install the client in a machine that is located in the same network segment, or try using a vpn that comunicates with the server bypassing all security devices, only to see if the network it's the problem.
2. Making a full optimize of one application to see if maybe the problem it's related to the segmentation of the cubes (i don't think that this is the problem but give it a try).
It is very wierd that in some computers happends and in others don't... also try to clean up the local cache of the applications in those computers that are giving to you bad performce and retry.
hope it helps,

Report is taking too much time when running from parameter form

Dear All
I have developed report in oracle reports bulider 10g. while running it from report builder data is coming very fast.
But, If it is running from parameter form it is taking too much time to format report in PDF.
Please suggest any configuration or setting if anybody is having Idea.
Thanks

Hi,
The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
If you still cannot determine the difference then trace both sessions.
Rod West

Query is taking too much time

hi
The following query is taking too much time (more than 30 minutes), working with 11g.
The table has three columns rid, ida, geometry and index has been created on all columns.
The table has around 5,40,000 records of point geometries.
Please help me with your suggestions. I want to select duplicate point geometry where ida=CORD.
SQL> select a.rid, b.rid from totalrecords a, totalrecords b where a.ida='CORD' and b.idat='CORD' and
sdo_equal(a.geometry, b.geometry)='TRUE' and a.rid !=b.rid order by 1,2;
regards

I have removed some AND conditions That was not necessary. It's just that Oracle can see for example that
a.ida='CORD' AND
b.idat='CORD' AND
a.rid !=b.rid AND
sdo_equal(a.geometry, b.geometry)='TRUE'
ORDER BY 1,2;if a.ida does not equal 'CORD', the whole set of conditions evaluates to FALSE, so Oracle will not bother evaluating the rest of the conditions because it's all AND'ed together, and TRUE AND FALSE = FALSE.
So if you place your least expensive conditions first (even though the optimizer can and will reorder conditions) this will give you a small performance benefit. Too small to notice, but on 5.4 million records it should be noticable.
and I have set layer_gtype=POINT.Good, that will help. I forgot about that one (Thanks Luc!).
Now i am facing the problem to DELETE duplicate point geometry. The following query is taking too much time. What is too much time? Do you need to delete these duplicate points on a daily or hourly basis? Or is this a one-time cleanup action? If it's a one-time cleanup operation, does it really matter if it takes half an hour?
And if this is a daily or even hourly operation, then why don't you prevent the duplicates from entering the table in the first place? That will save you from having to clean up afterwards. Of course, this might not be possible with your business requirements.
Lastly: can you post an explain plan for your queries? Those might give us an idea of what is taking so much time. Please enclose the results of the explain plan with
[ c o d e ]
<code/results here>
[ / c o d e ]
that way the original formatting is kept and it makes things much easier to read.
Regards,
Stefan

Import taking too much time

Hi all
I'm quite new to database administration.my problem is that i'm trying to import dump file but one of the table taking too much time to import .
Description::
1 Export taken from source database which is in oracle 8i character set is WE8ISO8859P1
2 I am taking import in 10 g with character set utf 8 and national character set is also same.
3 dump file is about 1.5 gb.
4 I got error like value is too large for column so in target db which is in utf 8 i convert all coloumn from varchar2 to char.
5 while taking a import some table get import very fast bt at perticular table it get very slow
please help me thanks in advance.......

Hello,
4 I got error like value is too large for column so in target db which is in utf 8 i convert all coloumn from varchar2 to char.
5 while taking a import some table get import very fast bt at perticular table it get very slow For the point *4* it's typically due to the CHARACTER SET conversion.
You export data in WE8ISO8859P1 and import in UTF8. In WE8ISO8859P1 characters are encoded in *1 Byte* so *1 CHAR = 1 BYTE*. In UTF8 (Unicode) characters are encoded in up to *4 Bytes* so *1 CHAR > 1 BYTE*.
For this reason you'll have to modify the length of your CHAR or VARCHAR2 Columns, or add the CHAR option (by default it's BYTE) in the column datatype definition of the Tables. For instance:
VARCHAR2(100 CHAR)The NLS_LENGTH_SEMANTICS parameter may be used also but it's not very well managed by export/Import.
So, I suggest you this:
1. set NLS_LENGTH_SEMANTICS=CHAR on your target database and restart the database.
2. Create from a script all your Tables (empty) on the target database (without the indexes and constraints).
3. Import the datas to the Tables.
4. Import the Indexes and constraints.You'll have more information on the following Note of MOS:
Examples and limits of BYTE and CHAR semantics usage (NLS_LENGTH_SEMANTICS) [ID 144808.1]For the point *5* it may be due to the conversion problem you are experiencing, it may also due to some special datatype like LONG.
Else, I have a question, why do you choose UTF8 on your Target database and not AL32UTF8 ?
AL32UTF8 is recommended for Unicode uses.
Hope this help.
Best regards,
Jean-Valentin

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

Report taking too much time in the portal

Hi freiends,
we have developed a report on the ods,and we publish the same on the portal.
the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
is there any way to sort out this issue,like can we send the report to the individual user's mail id
so that they can not log in to the portal
or can we create the same report on the cube.
what could be the main difference if the report made on the cube or ods?
please help me
thanks in advance
sridath

Hi
Try this to improve performance of query
Find the query Run-time
where to find the query Run-time ?
557870 'FAQ BW Query Performance'
130696 - Performance trace in BW
This info may be helpful.
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memory will decrease the loading time of the report.
Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
performance ISSUE related to AGGREGATE
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
202469 - Using aggregate check tool
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
6
Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Assign points if useful
Cheers
SM

Procedure Taking too Much Time

Hi Guys,
I have package which contains number of function and procedure which is link with Oracle 's standard report called Prodction Shortage Report , it is taking too much time and even now days it is not finsih after three days.
So I am looking for some tuning steps which I can follow for all the queries one by one, I tried touse Explain Plan what it is showing not too much difference after movement of column from one location to another etc , even I have updated the existing indexes and also created new indexes.
Thanks
Shishu Paul

Shishu,
Is this report part of an Oracle product such as the Enterprise Business Suite (EBS)? If so, I recommend you create a Service Request (SR) with Oracle and have them tune the report. Doing your own tuning could cause you some support problems later on.
Just my two cents...
Craig

While condition is taking too much time

I have a query that returns around 2100 records ( not many ! ) , when I am processing my result set with a while condition , it's taking too much time ( around 30 seconds ). Here is the code
public static GroupHierEntity load(Connection con)
     throws SQLException
     internalCustomer=false;
     String customerNameOfLogger = com.photomask.framework.ControlServlet.CUSTOMER_NAME;
if ( customerNameOfLogger.startsWith("DPI") || customerNameOfLogger.startsWith("DUPONT") || customerNameOfLogger==null || customerNameOfLogger.equals("") ||customerNameOfLogger.equals("Unavailable") )
{ internalCustomer=true;}
// System.out.println(" ***************** customer name of logger " + com.photomask.framework.ControlServlet.CUSTOMER_NAME + "internal customer " + internalCustomer);
// show all groups to internal customers and only their customer groups for external customers
if (internalCustomer) {
          stmtLoad = con.prepareStatement(sqlLoad);
     ResultSet rs = stmtLoad.executeQuery();
     return new GroupHierEntity(rs); }
     else
     stmtLoadExternal = con.prepareStatement(sqlLoadExternal);
     stmtLoadExternal.setString(1, customerNameOfLogger);
     stmtLoadExternal.setString(2, customerNameOfLogger);
     // System.out.println("***** sql " +sqlLoadExternal);
     ResultSet rs = stmtLoadExternal.executeQuery();
return new GroupHierEntity(rs);
GroupHierEntity ge = GroupHierEntity.load(con);
while(ge.next())
lvl = ge.getInt("lvl");
oid = ge.getLong("oid");
name = ge.getString("name");
if(internalCustomer) {
if (lvl == 2)
int i = getAlphaIndex(name);
super.setAppendRoot(alphaIndex);
gn = new GroupListDataNode(lvl+1,oid,name);
gn.setSelectable(true);
this.addNode(gn);
count++;
System.out.println("*** count "+ count);
ge.close();
========================
Then I removed every thing in the while clause and just run as it is , still it is taking same time ( 30 secs )
while(ge.next())
{count++;}
Why the while condition ( ge.next() ) is taking so much time ? Is there any other efficient way of reading the result set ?
Thanks ,
bala

I tried all these things. The query is not taking much time ( 1 sec ). but the resultset.next() is taking too much time. I counted the time by putting System.out.pr.. at various points to see whuch is taking how much time.
executeQuery() is only taking 1 sec. Processing the result set ( moving the cursor to next position ) is taking too much time.
I have similar queries that return some 800 rows , that only takes 1 sec.
I have doubt on resultset.next(). Any other alternative ?

Job is taking too much time

Hi,
I am running one SQL code that is taking 1 hrs. but when I schedule this code in JOB using package it is taking 5 hrs.
could anybody suggest why it is taking too much time?
Regards
Gagan

Use TRACE and TKPROF with wait events to see where time is being spent (or waisted).
See these informative threads:
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
HOW TO: Post a SQL statement tuning request - template posting
Also you can use V$SESSION and/or V$SESSION_LONGOPS to see what code is currently executing.

Oracle 11G + Database Connection taking too much Time

Similar Messages

Maybe you are looking for