Oracle 11g EM configuration problem

It seems a "bug" to me:
Windows 2003 R2 64-bit with all up-to-date patches
64-bit Oracle 11.1.0.7 for Windows 2003 R2 64-bit
The machine has only one HD right now and it is assigned to H, the DVD drive is assigned to D
Installed Oracle 11g, everything is fine, didn't configure the EM during installation.
After installation, manually configure the EM:
H:>emca -repos create
H:>emca -config dbcontrol db
all seems fine, but at the end of the second command, 2 perl.exe instances started. One of them never stops. It just eating up all the RAM (from 1.3GB --> 4GB and still increasing) and CPU (100% all the time).
The solution: plug-in a USB drive, which will be assigned to be C drive. Then the perl.exe calms down immediately, released most of the memory and CPU used.
But the perl.exe can resume this behavior maybe every one or two days. So, to calm it down, I have to keep the USB drive plugged.

Never heard about this,report the issue to Oracle support (you have a patched version,so I think you can open a SR on metalink). It may be that there's a 'hard-coded' reference to drive C somewhere in the code.
Werner

Similar Messages

Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install

Platform: Windows Vista 64 Bit Version
Downloaded: Oracle 11g Database 64 Bit
Service Pack 1
Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
Thanks
Preston
System Integrator

Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

Oracle 11g - Network Configuration check

Hi All,
This is my first time here and I am a newbie to Linux and Oracle installation.
I just finished installing Linux Enterprise version 5 ( provided by Oracle corp).
At the time of installation I did not do any type of network configuration and let the default network connection take effect.
After installing all the pre requirements for the Oracle 11g installation on my laptop I was stopped with a warning on the Oracle univesal Installer - product specific Prerequisite check.
This is what it gave me---
Checking Network Configuration requirements..
Check complete. The overall results of this check is : Not executed <<<
Recomendation : Oracle supports installation on systems with DHCP-assigned public IP addresses. However the primary network interface on the system should be configured with a Static IP Address in order for the oracle to function properly.See the installation guide for more details on installing the software on systems configured with DHCP.
I checked with the manuals and do not find any information about how to fix it.
The info given in the manual is
Installing on DHCP Computers
Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses on a network. Dynamic addressing enables a computer to have a different IP address each time it connects to the network. In some cases, the IP address can change while the computer is still connected. You can have a mixture of static and dynamic IP addressing in a DHCP system.
In a DHCP setup, the software tracks IP addresses, which simplifies network administration. This lets you add a new computer to the network without having to manually assign that computer a unique IP address.
Now i made some changes to the Network Config as root user and my Network configuration file looks like ( ie. /etc/hosts)
127.0.0.1 localhost StaticIP
It was previously something like
127.0.0.1 localhost.localdomain localhost.
As per the installation documents where ever i had references to localhost, i had left the localhost with the same name ' localhost' and have not changed it. Now it has StaticIP and I am not sure how to proceed.
What must I do?
I want to fix this error and also want oracle to work.
Thanks for your help!!

Thanks a lot guys to respond to this. I am using OEL5 ( supplied by Oracle Corp) and Oracle 11g. Installation of Linux takes about 40 minutes and installation of Oracle takes about an hour to 2 hours. Not sure why some RPM's do not show up on the CD's provided by Oracle.
So I tried to reinstall Linux . But the whole problem is, the Network Screens ( during installation) do not show up at all. It just skips that portion and goes to the Screen where there is the world Map and tells you to set up the time and date. I tried installing Linux many times and those Network configuration screens do not show up at all.
Here is my dilemma. After installing Oracle 11g, and immediately accessing the site https://localhost.localdomain:1158/em takes me into the OEM.
But after I shut down my machine and boot up again, I am unable to use the OEM's site https://localhost.localdomain:1158/em. Instead I get the message
===============================
Unable to Connect
Firefox can't establish a connection to the server at localhost.localdomain:1158
1. The site could be temporaily unavailable
2. If you are unable to load any pages, check your computer's network connection
3. If your computer is protected by firewall or proxy, make sure that firefox is permitted to access the Web.
===================================
I am thinking the problem is with 2. I do not have any firewall in my machine and i have also disbaled SELINUX.
I want to configure the computer so i can use the OEM in my Linux laptop.
My $ cat /etc/hosts gives
127.0.0.1 localhost.localdomain.
Please help me setup the Network so i can connect to 11g OEM.
And BTW this laptop is not even used to connect to the Internet.
Thanks
Sulu

Oracle 11g R2 install problem on Windows Server 2008 R2 SP1

Hi all,
Trying to install the Oracle 11g R2 database onto Windows Server 2008 R2 SP1.
I get as far as running the setup and a black window flashes up on the screen and disappears.
The log files only show the following:
Using paramFile: C:\Temp\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
I've tried running setup -debug from the command line but no further information is logged.
Any help in troubleshooting further is appreciated.

That is the complete log file. No error messages or further information is given.
I'm not sure how to check:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
I have checked on:
http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm
The server meets all the hardware requirements. The default file share is accessible and it is running a supported browser. The installer is being run with Admin rights. I'm not sure what else I need to check.

Oracle 11g client Configuration

Hi All,
I have Oracle 11g Server installed on my Linux box.
I want to use Oracle client 11g on my windowsXP access to the Server that on my linux box.
when i go to "Oracle-oraClient11g_home1","Configuration and Migration Tools", "Administration Assistant for Windows". I couldn't find the server that i want to add.
Here is my client configuration on my windowsXP:
tnsnames file
# tnsnames.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = "myoracle server name")(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
listener file:
# listener.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = "it's my client Machine")(PORT = 1521))
Sqlnet file:
# sqlnet.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
My windowXp is joined to the domain (ex. zzz domain).
Anyone who know and can help me about this, it will great.
Thanks to forum.
Marin

1. On your Oracle client side, you don't need listener.ora file
2. If you want to configure TNS Names on client, you run "Net Configuration Assistant" not "Administration Assistant for Windows"
3. You will not see a server drop down list like SQL Server did. No matter your join the domain or not. You need to enter the server hostname, port and Service name manually.

Oracle 11g client Update Problem

Hi ,
I have problem with oracle 11g client, I have a treatment that is has selected information and update after the last treatment.The problem is that the update is sometimes the enssemble fields, even those I do not want to update.
I use the 11g client with c #, my procedure is like update WHERE num = @ aram.I have doubts about the problems of loss of connection, because it give me the log: host not found, but there is a transaction, and in case of emergency I did a rollback.is there anyone who approaches to this problem??I took you to kindly help me, because the project and in production mode

Apart from the fact that this has nothing to do with Oracle Forms the certifications and the version checks of the installer are there for a reason. Copying one version file doesn't make your RHEL6 a RHEL3. RHEL6 most certainly uses a different kernel, different libraries, different everything then RHEL3 (yes, Software Vendors change version numbers of their products not just for fun!). You might get lucky (using your friend google) that you get it working with some effort, but this doesn't guarantee that everything works and given the fact that this is not certified getting help is not that easy. Better yet is to save yourself the time and stick with certified combinations (maybe use OEL insted of RHEL?)
cheers

Oracle 11g Greek Characters problem

Hello,
I have an Oracle 11g Express Edition installed on my Windows 7 64 bit machine, and i store greek characters inside it.
The characters display fine on SQL developer.
But when i connect it with my php application using PDO i get ??? instead of the greek characters.
I've set nls_lang in registry to GREEK_GREECE.EL8MSWIN1253
But when i run select * from nls_database_parameters i get the following.
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     AL32UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NCHAR_CHARACTERSET     UTF8
NLS_RDBMS_VERSION     11.2.0.2.0
Also, when i connect with pdo i use this command: $pdo_string = 'oci:host='.$this->server.';dbname='.$this->database.';charset=AL32UTF8';
Any thoughts on this?
Any help will be appreciated.
Mike

991209 wrote:
Solved it with:
shutdown immediate;
startup mount;
alter system enable restricted session;
alter system set job_queue_processes=0;
alter database open;
alter database character set internal_use EL8MSWIN1253;
shutdown immediate;
startup;This is not a documented or supported method to change the characterset of a database - supported methods are documented - http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#g1011430
https://forums.oracle.com/forums/search.jspa?threadID=&q=internal_use&objID=f50&dateRange=all&userID=&numResults=15&rankBy=10001
You will need to restore the database from a good backup and convert the characterset in a supported manner.
Also, 11g XE is not supported on Win 7 64-bit - http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABGGAJA
HTH
Srini

Oracle 11g Database Schema problem

Hi I have installed the Enterprise Edition of Oracle 11g on windows XP SP2. I log in to Enterprise Manager. When I click on the schema tab I get the following error message.
Error
Internal Error has occured. Check the log file for details.
Does anybody know why ? and which log file they are refering to?
Also can someone tell me where or how you can create normal users ?
thanks

the related OC4J machine is failing, it could be due to a number of reasons. Sometimes it has to do with the TZ region Agent recognizes, but the only way to know it for sure is by taking a look at the operational log files. Those can be found at the EM Console directory under the ORACLE_HOME. You will see the ORACLE_HOME/EMConsoleDirectory/log at the log there are several files, take a look at them and feedback.
~ Madrid
http://hrivera99.blogspot.com/

Oracle 11g EUS Configuration with Novell Edir problem

Environment: Oracle database 11g; OVD 11g, connected to Novell Edir 8.8.2
I have followed the document to configure the Oracle DB 11g for EUS (Enterprise user security) against an OVD 11g instance, which is connected to Novell Edir 8.8.2.
The steps mentioned are successful. But when I do sqlplus to authenticate, it gives an error ORA-28030.
[oracle@rhel5-32-ned bin]$ sqlplus username/password
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Dec 2 14:02:59 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-28030: Server encountered problems accessing LDAP directory service
At the same time, the OVD log shows:
[2009-12-03T16:18:18.523+05:30] [octetstring] [ERROR] [OVD-60053] [com.octetstring.vde.frontend.LDAP] [tid: 17] [ecid: 0000ILK9t4xFw000jzwkno1B5tSs000007,0] [arg: no cipher suites in common] Error accepting connection from server socket: no cipher suites in common.[[
javax.net.ssl.SSLHandshakeException: no cipher suites in common
From the middleware control, I configured the SSL port to accept all ciphers, but it still did not help.
Also, from the :1158/em->Server->Security->EUS, the ldap bind works.
Can someone please help on this.

Have you figured the issue out?

Oracle 11g Data Gaurd problem

I am currently in a Dev environment, working on a 11g Data Guard configuration, having Primary and Standby in 2 different nodes.
Both the nodes had their parameter files configured with the specific DG parameters, which are as below -
Primary init.ora
*.db_domain=''
*.db_name='o11_prim'
*.db_unique_name='o11_prim'
*.instance_name='o11_prim'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=o11_primXDB)'
*.FAL_Client=o11_stby
*.FAL_Server=o11_prim
*.job_queue_processes
*.Log_archive_config='DG_CONFIG=(o11_prim,o11_stby )'
*.Log_archive_dest_1='Location=/u01/app/oracle/pro duct/11.1.0/db_1/dbs/arch/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=o11_prim'
*.Log_archive_dest_2='Service=o11_stby lgwr async AFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=o11_stby'
*.Log_archive_dest_state_1=ENABLE
*.Log_archive_dest_state_2=ENABLE
*.log_archive_format=%t_%s_%r.arc
*.log_archive_max_processes0
*.service_names='o11_prim.xyz.com'
*.Standby_File_Management='AUTO'
*.statistics_level='TYPICAL'
*.timed_statistics=TRUE
Standby init.ora
*.db_domain=''
*.db_name='o11_prim'
*.db_unique_name='o11_stby'
*.instance_name='o11_prim'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=o11_primXDB)'
*.FAL_Client=o11_stby
*.FAL_Server=o11_prim
*.job_queue_processes
*.Log_archive_config='DG_CONFIG=(o11_prim,o11_stby )'
*.Log_archive_dest_1='Location=/u01/app/oracle/pro duct/11.1.0/db_1/dbs/arch/ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=o11_stby'
*.Log_archive_dest_2='Service=o11_prim lgwr async AFFIRM VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=o11_prim'
*.Log_archive_dest_state_1=ENABLE
*.Log_archive_dest_state_2=ENABLE
*.log_archive_format=%t_%s_%r.arc
*.log_archive_max_processes0
*.service_names='o11_stby.xyz.com'
*.Standby_File_Management='AUTO'
*.statistics_level='TYPICAL'
*.timed_statistics=TRUE
Initially, the Archive logs were getting transferred to the Standby via Automatic Managed Recovery Process. Command given below.
# This command is being run on Standby for starting Automatic Managed
# Recovery Process
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
Then we used to tail the Alert logs of both Primary and Standby, and the logs got transferred at the physical location of the Archive logs in Standby db.
Then one day due to some problem with the pfile, I shutdown the Standby db with the Primary up and running as usual using the following command-
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL IMMEDIATE;
The Result was as expected - Primary Archive logs got accumulated and the same couldn't be transferred to Standby as the Standby was down.
I had to manually recover the Standby by copying the extra Archive log files from Primary to Standby and then running the Recovery Process manually, using the below command -
SQL> RECOVER AUTOMATIC STANDBY DATABASE
Then when I restarted the Automatic Recovery process on Standby, I received the error as below -
ORA-16009 - Remote archive log destination must be a STANDBY database
This error keeps appearing on the alert log of both primary and physical standby that i configured.
I have no clue as to where it went wrong.
Kindly help!

Hi,
Here is my tnsnames.ora entries.
o11_prim =
(DESCRIPTION =
(FAILOVER = ON)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.226.35.20)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.226.35.30)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = o11_prim.cts.com)
LISTENER_PRIM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.226.35.20)(PORT = 1521))
o11_stby =
(DESCRIPTION =
(FAILOVER = ON)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.226.35.30)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.226.35.20)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = o11_prim.cts.com)
The service name for standby is o11_prim.cts.com and db_unique_name is o11_stby.

Oracle 11g XE connectivity problem

Hello,
I'm trying to setup a Virtual machine for test purposes using VMware Player.
I'm following Oracle® Database Express Edition Installation Guide 11g Release 2 (11.2) for Linux x86-64: http://download.oracle.com/docs/cd/E17781_01/install.112/e18802.pdf
As described there, I've installed Oracle Enterprise Linux 5 Update 2 from DVD V15099-01.zip(Enterprise-R5-U2-Server-x86_64-dvd.iso).
After that followed the instructions in the guide and installed the XE database... so far no errors or problems... while testing from local ssh session :)
[root@oracle11xe bin]# /etc/init.d/oracle-xe status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 26-OCT-2011 02:04:22
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 26-OCT-2011 01:44:00
Uptime 0 days 0 hr. 20 min. 22 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11xe/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11xe.localdomain)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11xe.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "XE", status READY, has 1 handler(s) for this service...
The command completed successfully
and
[root@oracle11xe bin]# sqlplus system
SQL*Plus: Release 11.2.0.2.0 Production on Wed Oct 26 01:51:12 2011
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
SQL> EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
PL/SQL procedure successfully completed.
SQL> exit
[root@oracle11xe ~]# telnet 192.168.1.10 1521
Trying 192.168.1.10...
Connected to 192.168.1.10 (192.168.1.10).
Escape character is '^]'.
But now when I try access this VM box from my windows box, from where I have ping and can open SSH connection, I get "Could not open connection to the host".
I've already disabled my windows firewall for the test - no good. Also SSH works over the network, so I don't think it's a firewall or network issue...maybe I'm missing something in listners configuration or some security setting somewhere?
I've created screenshot http://img846.imageshack.us/img846/2931/oraissue.jpg .
I'm looking forward to your suggestions, because I'm running out of ideas, I expected to be able to start this thing faster :)
Regards,
Pavel

Hello,
What sort of access? And ssh is working? putty? Using VM NAT, or bridged?
Yes, from my desktop windows to the VM's eth0 interface I could use SSH without any concerns. Yes, I've used PuTTY Client for SSH. For VM is bridged.
That's not relevant to accessing the VM, you'll need to open up ports in the VM host firewall. Port 8080 too if you want to access the Apex pages, along with opening port 1521 for the database listener.
Yes, you are right - had to stop firewall on my VM box... since this is a dummy sandbox I just stopped firewall
service iptables stop
chkconfig iptables off
After that SQL Developer Studio managed to open connection to the XE database on this VM box over the network. Thank you!
You've got all the listener endpoints, including the http 8080 but setting up a server on dhcp isn't optimal unless you have dynamic DNS to register the VM IP for name resolution. Unless a dos box $ ping oracle11xe or $ ping oracle11xe.localdomain from the Win box gets the correct IP address of the VM ...
Sorry I didn't get this one... Could you please give me more information.
I've configured VM(oracle11xe.localdomain) to use static IP address(NO DHCP, I'd like to avoid involving the DHCP Server in my network in this simple test). This leads to me being able to ping it from Win Box only via IP address, what problems may show up from this? My idea was to avoid having problems, if for example I started the VM box in very different environment(lets say another network) and it gets some other IP address, because I didn't knew how oracle XE will feel about the new IP?
Once again - Thank you. Original issue is solved!

Oracle 11g XE Connectivity Problems

Hi to all and thanks for the attention !
Quick facts
OS : Microsoft Server 2008 R2 (x64)
Oracle Version : 11g XE (x32)
Database name : XE
I've been fighting over with providers for a whole day and I can't seem to make this work out,
I have an application(Web, on a IIS 7) that connects to a schema, the connection uses a Oracle Provider For OleDB, well at first I was getting a "Provider not registered" error, that was easy I only had to make the app run on x32 and puf the error changed, so I quickly set up the Data Source ( with the data source manager located in WOW64 ) with a oracle ole db provider, no problems, I can click on it, it will ask me for a user/password and when I click test connection I works just like I would expect it to work, now back to the application, when i set the connection string up, I get a error from the app : ORA-12154 TNS:could not resolve the connect identifier specified. So went up and tried making a udl ( invoking again the x32 ), same error ORA-12154 so I started digging and so far so good what I got is, "try tnsping <instance_Name>", did it, and got an OK (40ms) (though I had to navigate to bin folder, which was not explained in the posts, perhaps this means something ?) and also registered the oraoledb11.dll with regsvr32
Oh ! And I can connect to the database with sqldeveloper
I know really little of Oracle, any thoughts ?
Thanks again !

ORA-12154 ALWAYS only occurs on SQL Client & no SQL*Net packets ever leave client system
ORA-12154 NEVER involves the listener, the database itself or anything on the DB Server.
ORA-12154 occurs when client requests a connection to some DB server system using some connection string.
TNS-03505 is thrown by tnsping & is same error as ORA-12154 thrown by sqlplus or others.
The lookup operation fails because the name provided can NOT be resolved to any remote DB.
The analogous operation would be when you wanted to call somebody, but could not find their name in any phonebook.
The most frequent cause for the ORA-12154 error is when the connection alias can not be found in tnsnames.ora.
The lookup operation of the alias can be impacted by the contents of the sqlnet.ora file; specifically DOMAIN entry.
So post the content of the sqlnet.ora file.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1]
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Oracle JDBC Pool Configuration problems

Hi all,
I'm usin oracle 8.1.6 & thin driver (classes12.zip).
I've set up correctly a pool in a wl 6.1 windows 2K machine.
I've copied EXACTLY the configuration values in a wl 6.1 solaris 7 machine and
doesn't works (it seems wl can't find the listener).
My cuestions;
-Why the wl console adds automatically the propertie dll=ocijdbc8 when i'm configuration
the pool? I don´t want to use the OCI driver!
-Can this be the problem?
-Should I place classes12.zip first on the classpath than weblogic.jar?
TIA.
Pablo.

Hi. The issue isn't the zip, it's probably the properties you supply for the pool.
The oracle driver will try to use the type-2 native libraries if you specify
a server in the properties.
Joe
Pablo wrote:
Hi all,
I'm usin oracle 8.1.6 & thin driver (classes12.zip).
I've set up correctly a pool in a wl 6.1 windows 2K machine.
I've copied EXACTLY the configuration values in a wl 6.1 solaris 7 machine and
doesn't works (it seems wl can't find the listener).
My cuestions;
-Why the wl console adds automatically the propertie dll=ocijdbc8 when i'm configuration
the pool? I don´t want to use the OCI driver!
-Can this be the problem?
-Should I place classes12.zip first on the classpath than weblogic.jar?
TIA.
Pablo.

Oracle 11G - Table access problem

Hi,
Iam new to Oracle...After creating a DataBase I created a connection and role has SYSDBA...
And then I create a table....called Table1. And then I create a new USER and I Connect with same Databse SID but the role has DEFAULT for this new USER....
01. But the problem is I cannot find the table -Table1 for this new user...so how to acess that Table1.....?
02. I came to know in Oracle also we can design Forms for frontend and can generate EXE....Is it true?
03. In SQL Server -Sql Port with static IP- we can access the Database for remote users.... For Oracle is it possible?
Thanks for the directions....

997497 wrote:
Hi,
Iam new to Oracle...After creating a DataBase I created a connection and role has SYSDBA...What user did you use to connect? I'm guessing that you logged in as SYS
And then I create a table....called Table1. And then I create a new USER and I Connect with same Databse SID but the role has DEFAULT for this new USER....So I'm guessing that you created the table in the SYS schema. You should never, ever create user objects in the SYS schema. If you created the table in the SYS schema, you really need to drop it and create it in a more appropriate schema.
You indicate that you're coming from SQL Server, so there is perhaps a terminology issue. What SQL Server refers to as a "database" is roughly equivalent to what Oracle refers to as a "schema". An Oracle database contains many schemas. A schema is the set of objects owned by a particular user.
01. But the problem is I cannot find the table -Table1 for this new user...so how to acess that Table1.....?As I said above, you really, really shouldn't create objects in the SYS schema. If you really want to, though, you would need to log in to the SYS schema and grant access on the table to your new user
GRANT SELECT ON sys.table1 TO your_new_userYou would then need to fully qualify the table name in your SELECT (or create a synonym or set the current_schema)
SELECT *
FROM sys.table1
02. I came to know in Oracle also we can design Forms for frontend and can generate EXE....Is it true? Ancient versions of Oracle Forms would create client/server executables. Modern versions are used to build three-tier applications. You can also use APEX to build web-based applications. Of course, you can also generate executables by writing code in some other language (often .Net).
03. In SQL Server -Sql Port with static IP- we can access the Database for remote users.... For Oracle is it possible?Is it possible? Sure. Depending on what "remote users" means though, it may be rather ill-advised-- you'd never want to open up a database to the internet directly, for example, you'd want to ensure that the remote users are connected to your network (i.e. via a VPN).
Justin

Redhatlinux server 5.0 install oracle 11g r1 for problem

who give me a chinese oralce book for install !
not run sqlplus not run exp,not run imp but oracle devcolepe

user633300 wrote:
who give me a chinese oralce book for install !
not run sqlplus not run exp,not run imp but oracle devcolepeHi and welcome to the forum!
What do you exactly want?
What problem you have?
What error you get?
And please explain your last sentence please
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

Oracle 11g EM configuration problem

Similar Messages

Maybe you are looking for