Oracle 11g for Ubuntu ?

Hi,
Is Oracle 11g supported on Ubuntu ? which flavor ?
If not, which is the standard Linux distribution Oracle considers fit for Oracle 11g ?
regards
raghav..

See http://www.oracle.com/technology/support/metalink/index.html

Similar Messages

Installing Oracle 11g on Ubuntu 8.04

Hello,
I am having a sleepless night trying to install Oracle 11g express on Ubuntu 8.04.
There is no server. I am actually trying to install on the exact box i am using.
I got this error again and again. Any pro and experts please help:
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
=======================
oracle@sithkong-desktop:~/database$ DISPLAY=127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ export DISPLAY
oracle@sithkong-desktop:~/database$ xclock
No protocol specified
Error: Can't open display: 127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 10751 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1915 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-29_10-22-59PM. Please wait ...oracle@sithkong-desktop:~/database$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
No protocol specified
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'

http://www.pythian.com/news/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
HTH...

Oracle 11g for production

Hi,
I have download oracle 11g for linux.
We have one to create a new database for one of our production system.
Shall I create the database on 11g or wait for some time.(we have tested the application on 10g)
Regards
MMU

Hans and I seem to be giving the same advice here.
The point I was trying to make was to be careful.
There are probably more important things to consider
rather than acting on the urge for the latest and
greatest technology piece.Yes. Perhaps different phrases meaning the same thing help a person understand better,.
After all, the biggest part of an upgrade process is 'understanding risk' and the biggest part of the DBAs job in production is 'mitigating risk'. For Risk Management, the more perspectives, the better.
That is really our job in a nutshell. And that may be why we often have challenges with developer's - their job is to get new capabilities and due to their time pressures they may not be looking at risks the same way. (Just look at how much exception handling the typical developer does.)
Message was edited by: Hans Forbrich
Years ago, a sales rep with whom I worked said "If you want to understand how a person behaves, ask how they are compensated."

ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
While connecting as localhost is pretty well.
but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

user11225434 wrote:
Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                05-AUG-2013 09:31:09
Uptime                    0 days 0 hr. 6 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
ner.ora
Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
ml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orclxe" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
Service "orclxeXDB" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
The command completed successfully
# listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\eee
3. My ip is static 192.168.52.170 and window 7 prof. is there.
4. Sir i have tested the remote connection with firewall configuration is off.
Hopefully this info is useful.
but command: sqlplus username@'192.168.52.178:1521/orcl'
NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

How to install oracle 11g on ubuntu 10.10

please give me the steps for installing oracle db 11g on Ubuntu 10.10

To the best of my knowledge, installing the database on any debian-based distro is not supported. Red Hat and OEL are officially supported, although I have seen guides on installing on Fedora which should also apply to CentOS. I'd go here for that: http://www.oracle-base.com/
There have been some reports of success with the Oracle client on Ubuntu (again, not supported but hey, it works). Check here. http://mikesmithers.wordpress.com/category/ubuntu/

Help me ! can't install oracle 11g on ubuntu

Hello i'm student,i'm studing oracle database 11g but i met some bug such as
http://nguy-hiem.co.cc/12.png
i try to fix it and i was run fixup.sh but
root@hieukenpro-virtual-machine:/tmp/CVU_11.2.0.1.0_oracle# ./runfixup.sh
Response file being used is :./fixup.response
Enable file being used is :./fixup.enable
Log file location: ./orarun.log
*./fixup.response: line 11: unexpected EOF while looking for matching `"'*
*./fixup.response: line 12: syntax error: unexpected end of file*
*./fixup.response: line 12: warning: syntax errors in . or eval will cause future versions of the shell to abort as Posix requires*
*Setting Kernel Parameters...*
*uid=1001(oracle) gid=1001(oinstall) groups=1001(oinstall),1002(dba)*
*oracle hard nproc 16383*
*Could not find MAX_PROCESSES_HARDLIMIT from /etc/security/limits.conf or response file.*
*oracle hard nofile 65535*
*Could not find FILE_OPEN_MAX_HARDLIMIT from /etc/security/limits.conf or response file.*
*oracle soft nofile 1023*
*Could not find FILE_OPEN_MAX_SOFTLIMIT from /etc/security/limits.conf or response file.*
so what should i do ?
THANK!
Edited by: 837251 on 05:14 16-02-2011
Edited by: 837251 on 05:17 16-02-2011

Oracle 11g does not support Ubuntu. It can be installed, but requires word-around:
Re: Installing Oracle 11g R2 on Ubuntu 10 Howto

Oracle 11g for WinXP VirtualMachine install problem

Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?

957717 wrote:
Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?What is the full path name to the directory where unzipped the files?
Do a system 'find' and locate 'em.ear'. What is the full path name to it? At acommand prompt, enter the following:
cd \
dir /s em.earcopy the entire session -- command and results, and paste back here.
Also, does the path to the installation files contain any spaces? Does the path to the installed ORACLE_HOME contain any spaces?
You have my condolences for having to work with Windows. To paraphrase a line from a popular movie . . "My momma always said Windows was like a box of chocolates."
Edited by: EdStevens on Sep 7, 2012 3:42 PM

Oracle 11g for Visual Studio 2008 errors

I installed llg four(4) times and get the same result: I can't get a Data Connection!!! There is no other Oracle version on this computer and I've cleaned up the registry on all four installs. In order to run SQLNET you must first have a Data Connection! Can someone that has experience with Visual Studio and Oracle 11g installation please tell me what I'm doing wrong? HELP! PLEASE, email me directly at: [email protected] Thanks. Any documentation would be helpful.
Edited by: lam5158 on Sep 23, 2009 3:38 PM

Sorry, you are right and it's my fault. Thanks for the tip. I saw the versions listed when I did the install, but I didn't realize I needed to select any because I thought it would install automatically for whichever VS versions you had installed.
Thanks again! :)

Oracle 11g for Visual Studio 2008

I installed llg four(4) times and get the same result: I can't get a Data Connection!!! There is no other Oracle version on this computer and I've cleaned up the registry on all four installs. In order to run SQL*NET you must first have a Data Connection! Can someone that has experience with Visual Studio and Oracle 11g installation please tell me what I'm doing wrong? HELP! PLEASE, email me directly at: [email protected] Thanks. Any documentation would be helpful.

Excellent test case, may by you should raise an SR and hope it ends up as a bug.
What happens if you "ping box01.data.local" what IP Address do you get back? You should be looking to get back the loopback address.
What happens if you do a nslookup 192.168.30.64 and 192.168.1.100?
Have you tred setting ORACLE_HOSTNAME? Not sure if this is just for the installer or not.

Oracle 11g for Oracle access manager, OID version details

At present we have 1og db for sso and oid. I have checking in db that our exsisting OID and SSO versions are
Oracle9iAS Single Sign-On 10.1.2.0.2
Oracle9iAS Internet Directory
OID 10.1.2.1.0
We are moving to diff hosting solution and vendor is recommanding to have 11g Oracle access manager(in 11g sso is replaced by OAM) and OID.
What is the version of OID with 11g or please refer me to the documentaion where i can greb 11g OAM, oid etc versions

Kapardhi wrote:
Where can i find oracle 11g server for windows7 home basic 64bit version...Oracle 11gR2 is certified on Windows 7 x64 - Professional, Enterprise, and Ultimate editions -- http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm#BGBEEBAD
You can download 11gR2 from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thanks,
Hussein

Oracle 11g for windows7 home basic 64bit version

Where can i find oracle 11g server for windows7 home basic 64bit version...

Kapardhi wrote:
Where can i find oracle 11g server for windows7 home basic 64bit version...Oracle 11gR2 is certified on Windows 7 x64 - Professional, Enterprise, and Ultimate editions -- http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm#BGBEEBAD
You can download 11gR2 from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thanks,
Hussein

Oracle 11g for Linux PC Download

I just downloaded Oracle 11g R1 for LINUX from this OTN site. Do I also get the Enterprise Manager?

Hi,
You can download Oracle Enterprise Manager 11g from:
Oracle Enterprise Manager Downloads
http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
Thanks,
Hussein

Improve XML readability in Oracle 11g for binary XMLType storage for huge files

I have one requirement in which I have to process huge XML files. That means there might be around 1000 xml files and the whole size of these files would be around 2GB.
What I need is to store all the data in these files to my Oracle DB. For this I have used sqlloader for bulk uploading of all my XML files to my DB and it is stored as binary XMLTYPE in my database.Now I need to query these files and store the data in relational tables.For this I have used XMLTable Xpath queries. Everything is fine when I try to query single xml file within my DB. But if it is trying to query all those files it is taking too much time which is not acceptable.
Here's my one sample xml content:
<ABCD>
<EMPLOYEE id="11" date="25-Apr-1983">
    <NameDetails>
      <Name NameType="a">
        <NameValue>
          <FirstName>ABCD</FirstName>
          <Surname>PQR</Surname>
          <OriginalName>TEST1</OriginalName>
          <OriginalName>TEST2</OriginalName>
        </NameValue>
      </Name>
      <Name NameType="b">
        <NameValue>
          <FirstName>TEST3</FirstName>
          <Surname>TEST3</Surname>
        </NameValue>
        <NameValue>
          <FirstName>TEST5</FirstName>
          <MiddleName>TEST6</MiddleName>
          <Surname>TEST7</Surname>
          <OriginalName>JAB1</OriginalName>
        </NameValue>
        <NameValue>
          <FirstName>HER</FirstName>
          <MiddleName>HIS</MiddleName>
          <Surname>LOO</Surname>
        </NameValue>
      </Name>
      <Name NameType="c">
        <NameValue>
          <FirstName>CDS</FirstName>
          <MiddleName>DRE</MiddleName>
          <Surname>QWE</Surname>
        </NameValue>
        <NameValue>
          <FirstName>CCD</FirstName>
          <MiddleName>YTD</MiddleName>
          <Surname>QQA</Surname>
        </NameValue>
        <NameValue>
          <FirstName>DS</FirstName>
          <Surname>AzDFz</Surname>
        </NameValue>
      </Name>
    </NameDetails>
</EMPLOYEE >
</ABCD>
Please note that this is just one small record inside one big xml.Each xml would contain similar records around 5000 in number.Similarly there are more than 400 files each ranging about 4MB size approx.
My xmltable query :
SELECT t.personid,n.nametypeid,t.titlehonorofic,t.firstname,
        t.middlename,
        t.surname,
        replace(replace(t.maidenname, '<MaidenName>'),'</MaidenName>', '#@#') maidenname,
        replace(replace(t.suffix, '<Suffix>'),'</Suffix>', '#@#') suffix,
        replace(replace(t.singleStringName, '<SingleStringName>'),'</SingleStringName>', '#@#') singleStringName,
        replace(replace(t.entityname, '<EntityName>'),'</EntityName>', '#@#') entityname,
        replace(replace(t.originalName, '<OriginalName>'),'</OriginalName>', '#@#') originalName
FROM xmlperson p,master_nametypes n,
         XMLTABLE (
          --'ABCD/EMPLOYEE/NameDetails/Name/NameValue'
          'for $i in ABCD/EMPLOYEE/NameDetails/Name/NameValue
           return <row>
                    {$i/../../../@id}
                     {$i/../@NameType}
                     {$i/TitleHonorific}{$i/Suffix}{$i/SingleStringName}
                    {$i/FirstName}{$i/MiddleName}{$i/OriginalName}
                    {$i/Surname}{$i/MaidenName}{$i/EntityName}
                </row>'
        PASSING p.filecontent
        COLUMNS
                personid     NUMBER         PATH '@id',
                nametypeid   VARCHAR2(255) PATH '@NameType',
                titlehonorofic VARCHAR2(4000) PATH 'TitleHonorific',
                 firstname    VARCHAR2(4000) PATH 'FirstName',
                 middlename VARCHAR2(4000) PATH 'MiddleName',
                surname     VARCHAR2(4000) PATH 'Surname',
                 maidenname   XMLTYPE PATH 'MaidenName',
                 suffix XMLTYPE PATH 'Suffix',
                 singleStringName XMLTYPE PATH 'SingleStringName',
                 entityname XMLTYPE PATH 'EntityName',
                originalName XMLTYPE        PATH 'OriginalName'
                ) t where t.nametypeid = n.nametype and n.recordtype = 'Person'
But this is taking too much time to query all those huge data. The resultset of this query would return about millions of rows. I tried to index the table using this query :
CREATE INDEX myindex_xmlperson on xml_files(filecontent) indextype is xdb.xmlindex parameters ('paths(include(ABCD/EMPLOYEE//*))');
My Database version :
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production"
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Index is created but still no improvement with the performance though. It is taking more than 20 minutes to query even a set of 10 similar xml files.Now you can imagine how much will it take to query all those 1000 xml files.
Could someone please suggest me how to improve the performance of my database.Since I am new to this I am not sure whether I am doing it in proper way. If there is a better solution please suggest. Your help will be greatly appreciated.

Hi Odie..
I tried to run your code through all the xml files but it is taking too much time. It has not ended even after 3hours.
When I tried to do a single insert select statement for one single xml it is working.But stilli ts in the range of ~10sec.
Please find my execution plan for one single xml file with your code.
"PLAN_TABLE_OUTPUT"
"Plan hash value: 2771779566"
"| Id | Operation                                     | Name                                     | Rows   | Bytes | Cost (%CPU)| Time     |"
"|   0 | INSERT STATEMENT                   |                                              |   499G |   121T |   434M (2) |999:59:59 |"
"|   1 | LOAD TABLE CONVENTIONAL    | WATCHLIST_NAMEDETAILS |            |           |                 |                 |"
"|   2 |   SORT AGGREGATE                   |                                             |     1      |     2    |                 |          |"
"|   3 |    XPATH EVALUATION                 |                                             |             |          |                 |          |"
"|   4 |   SORT AGGREGATE                   |                                             |     1      |     2    |                 |          |"
"|   5 |    XPATH EVALUATION                 |                                             |             |          |                 |          |"
"|   6 |   SORT AGGREGATE                   |                                             |     1       |     2   |                 |          |"
"|   7 |    XPATH EVALUATION                 |                                             |              |         |                 |          |"
"|   8 |   SORT AGGREGATE                   |                                             |     1        |     2 |                 |          |"
"|   9 |    XPATH EVALUATION                 |                                             |              |         |                 |          |"
"| 10 |   NESTED LOOPS                       |                                             |   499G    | 121T |   434M (2) | 999:59:59 |"
"| 11 |    NESTED LOOPS                      |                                             |    61M     | 14G | 1222K (1) | 04:04:28 |"
"| 12 |     NESTED LOOPS                     |                                             | 44924      | 10M |    61   (2) | 00:00:01 |"
"| 13 |      MERGE JOIN CARTESIAN      |                                             |     5         | 1235 |     6   (0) | 00:00:01 |"
"|* 14 |       TABLE ACCESS FULL          | XMLPERSON                        |     1          | 221 |     2   (0) | 00:00:01 |"
"| 15 |       BUFFER SORT                     |                                             |     6          | 156 |     4   (0) | 00:00:01 |"
"|* 16 |        TABLE ACCESS FULL         | MASTER_NAMETYPES        |     6          | 156 |     3   (0) | 00:00:01 |"
"| 17 |      XPATH EVALUATION             |                                             |                |         |               |          |"
"|* 18 |     XPATH EVALUATION              |                                             |               |          |               |          |"
"| 19 |    XPATH EVALUATION               |                                              |               |         |              |          |"
"Predicate Information (identified by operation id):"
" 14 - filter(""P"".""FILENAME""='PFA2_95001_100000_F.xml')"
" 16 - filter(""N"".""RECORDTYPE""='Person')"
" 18 - filter(""N"".""NAMETYPE""=CAST(""P1"".""C_01$"" AS VARCHAR2(255) ))"
"Note"
"   - Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)"
Please note that this is for a single xml file. I have like more than 400 similar files in the same table.
And for your's as well as Jason's Question:
What are you trying to accomplish with
replace(replace(t.originalName, '<OriginalName>'),'</OriginalName>', '#@#') originalName
originalName XMLTYPE PATH 'OriginalName'
Like Jason, I also wonder what's the purpose of all those XMLType projections and strange replaces in the SELECT clause
What I was trying to achieve was to create a table containing separate rows for all the multi item child nodes for this particular xml.
But since there was an error beacuse of multiple child nodes like 'ORIGINALNAME' under 'NAMEVALUE' node, I tried this script to insert those values by providing a delimiter and replacing the tag names.
Please see the link for more details - http://stackoverflow.com/questions/16835323/construct-xmltype-query-to-store-data-in-oracle11g
This was the execution plan for one single xml file with my code :
Plan hash value: 2851325155
| Id | Operation                                                     | Name                                         | Rows | Bytes   | Cost (%CPU) | Time       |    TQ | IN-OUT | PQ Distrib |
|   0 | SELECT STATEMENT                                   |                                                 | 7487   | 1820K |    37   (3)        | 00:00:01 |           |             |            |
|* 1 | HASH JOIN                                                 |                                                 | 7487   | 1820K |    37   (3)        | 00:00:01 |           |             |            |
|* 2 |   TABLE ACCESS FULL                                | MASTER_NAMETYPES            |     6     |   156     |     3   (0)         | 00:00:01 |           |             |            |
|   3 |   NESTED LOOPS                                        |                                                 | 8168   | 1778K |    33   (0)        | 00:00:01 |           |             |            |
|   4 |    PX COORDINATOR                                    |                                                 |            |             |                      |               |           |             |            |
|   5 |     PX SEND QC (RANDOM)                           | :TQ10000                                  |     1    |   221      |     2   (0)        | 00:00:01 | Q1,00 | P->S     | QC (RAND) |
|   6 |      PX BLOCK ITERATOR                              |                                                 |     1    |   221      |     2   (0)        | 00:00:01 | Q1,00 | PCWC   |            |
|* 7 |       TABLE ACCESS FULL                            | XMLPERSON                            |     1    |   221      |     2   (0)        | 00:00:01 | Q1,00 | PCWP   |            |
|   8 |    COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE | 8168 | 16336    |    29   (0)       | 00:00:01 |           |               |            |
Predicate Information (identified by operation id):
   1 - access("N"."NAMETYPE"=CAST(SYS_XQ_UPKXML2SQL(SYS_XQEXVAL(SYS_XQEXTRACT(VALUE(KOKBF$),'/*/@NameType'),0,0,20971520,0),50,1,2
              ) AS VARCHAR2(255) ))
   2 - filter("N"."RECORDTYPE"='Person')
   7 - filter("P"."FILENAME"='PFA2_95001_100000_F.xml')
Note
   - Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
Please let me know whether this has helped.
My intention is to save the details in the xml to different relational tables so that I can easily query it from my application. I have similarly many queries which inserts the xml values to different tables like the one which I have mentioned here. I was thinking of creating a stored procedure to insert all these values in the relational tables once I receive the xml files. But even a single query is taking too much time to complete. Could you please help me in this regard. Waiting for your valuable feedback.

Set events parameter in oracle 11g for SAP

Hi All,
Recently we have upgraded 10.2.0.4 oracle database to 11.2.0.3 (AIX 7.1) for SAP application.
Some non-default event parameters were set when Database was running with 10.2.0.4 version. After upgrade to 11.2.0.3, those events were not seen in pfile/spfile. However, post_upgrade log shows that those events were set (and log displays the list of the events as well).
Now, my concern is whether those event parameters were set already by default (if it is already set after upgrade, not sure why pfile not reflecting them) or do I need to set the parameters manually.
Thanks in advance for all your help.
Regards,
Prakash

Yes, they seem to be part of the upgrade itself, and SAP seems to set them in multiple places:
1) During the dbua.sap.sh run, post-processing calls custom scripts which set these events (check the CustomScript.log in $ORACLE_BASE/cfgtoollogs/dbua/SID/upgrade1 and you can see where it is set)
2) The post_upgrade_status.sql script in $ORACLE_HOME/sap/ora_upgrade/post_upgrade sets them when you run it as directed after the upgrade
3) The SBP post-patch instructions specify a command to run that sets these in the spfile
I don't think any of the upgrade steps regenerate the pfile, so if you're looking at one you generated pre-upgrade (like I did earlier today to pull out underscore parameters and user/background_dump_dest) that you then used to startup the database, SAP is definitely changing stuff behind your back. I'd just regenerate the pfile to avoid confusion.

Ideas on how to export from Oracle (11g) for import into a MSSQL server?

Hi folks,
Crazy question yes...but I have some devs that are needing to export some schemas/tables from Oracle to somehow import into MSSQL.
Are there any utilities our there, hopefully from Oracle that would allow for this? So far, all I can think of are to generate the DDL from the Oracle instance, and then do some scripts to output the data in a cvs type format....
Anything better than this?
Any links or suggestions greatly appreciated.
Thank you in advance,
cayenne

cayenne wrote:
EdStevens wrote:
cayenne wrote:
sybrand_b wrote:
Heterogeneous Services using ODBC or OLEDB.
No need for stupid csv files.
Sybrand Bakker
Senior Oracle DBAThank you for the prompt reply. I'm looking into this and am finding some Oracle documentation, but just off the top of my head, this approach seems to assume the 2 database servers can see or talk to each other.
What if the oracle box is on one network...that cannot connect to the network that the MSSQL box is on. For example..running off some test data from one company to another company with networks that do not cross?Assuming some acceptable export/import utility, how do you plan on getting the file from the source to the target if the two servers are on networks that cannot talk to each other?Well, I'm still trying to gather facts, this is just a question coming in from some developers.
From what it may be, is that the can scp from site to site, but no direct connectivity between the database servers on the sites...isolated, maybe a DMZ...I dunno everything yet.Well, you either have connectivity between the two machines or you don't. Binary decision tree.
IF net_connectivity_exists
     you can use oracle sqlnet enabled capabilities
     OR
     you can transfer an export file via ftp, sftp, scp, etc.
ELSE
     you have to transfer an export file via sneakernet
END-IF

Oracle 11g for Ubuntu ?

Similar Messages

Maybe you are looking for