Oracle 11g for WinXP VirtualMachine install problem

Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?

957717 wrote:
Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?What is the full path name to the directory where unzipped the files?
Do a system 'find' and locate 'em.ear'. What is the full path name to it? At acommand prompt, enter the following:
cd \
dir /s em.earcopy the entire session -- command and results, and paste back here.
Also, does the path to the installation files contain any spaces? Does the path to the installed ORACLE_HOME contain any spaces?
You have my condolences for having to work with Windows. To paraphrase a line from a popular movie . . "My momma always said Windows was like a box of chocolates."
Edited by: EdStevens on Sep 7, 2012 3:42 PM

Similar Messages

Oracle 11g stop working after installing Patch 1

I'm new to Oracle. I installed Oracle 11g Database this weekend. The installation went well with no problems. However, after installing the base system I then installed Patch1. I had no problems installing the patch. I restarted my system and then started the EM. I received the following message from the EM:
ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
What does this mean and how do I fix it?
I then did an uninstall of Oracle 11g and then re-installed it. The problem went away. So I'm confidenced that the installation of Patch 1 caused the problem.
Thanks for your help.
Lou

I'm very sorry of the over sight on my part. My environment is as follows: Dell PowerEdge 1900 with 16gb of memory, 2 physical Quad processors and 4tb of disk space. I have the installed Oracle 11g on Windows 2008 Datacenter.
I am trying to upgrade as follows: Oracle Database 11g Release 11.1.0.6 to Oracle Database 11g Release 11.1.0.7. I will implement the Post Installation instruction to see what happens. It was an oversight on my part.
Thanks

CRS not starting after Oracle 11g Grid was succesuflly installed

Hi:
Have 2 node RAC. My Shared storage is on openfiler.
Oracle 11g Grid was successfully installed and all the services was working fine. When i restarted the system I found CRS was not coming up. Remaining processes were up and running.
Let me explain what I did: (O/s RHEL 5.4 & oracle 11g R2 grid)
I have a partition in shared disk /dev/sdc1 (I have other partitions, but thought of using only one for OCR and voting disk). (did not define it as raw partition as I used to do in 10g RAC).
While installing Oracle grid and when it prompted to enter the Diskgroup for OCR and Voting disk I gave a name DGDATA and choose only one (external redundancy) disk “/dev/sdc1″ (it does not ask for one for OCR and one for Voting as it used to do in 10g clusterware installation). As per my assumption both OCR and Voting disk were created within /dev/sdc1 (after installation when I queried I got the same info)
The Oracle grid installation has gone through successfully. when I restart the system I find CRS not starting.
The log says: “Error PROC:26: Error while accessing the physical storage ASM……..
ORA-01034: oracle not available...
Could not init OCR, code:26….
Linux permission denied".
For your information….ASM instance is up (check in both the nodes) and I find the diskgroup mounted.
Can anyone help on this.
Also let me know how to uninstall Oracle 11g Grid software and configuration. If I have to reinstall the Oracle 11g grid software and config once again is it possible without reinstalling RHEL. Let me know the steps or any link please. don't want to get into a mess again.
Thanks in advance.
Regards
Dinesh

Jorg, I even tried to nomount the DB instance using initDBRAC.ora pfile. Then tried to create spfile still got the same error.
The second trace file which I have pasted looks like some memory dump.
ASM_DISKSTRING= /dev/sdc*
***********************************************************************1st trace file
Fatal NI connect error 12547, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser)(CONNECT_DATA=(CID=(PROGRAM=oracle@skyit6)(HOST=skyit6)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 01-JUN-2011 01:27:07
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 517
TNS-00517: Lost contact
nt secondary err code: 32
nt OS err code: 0
ERROR: Failed to connect with connect string: (DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/crs/11.2.0/grid/bin/oracle)(ARGV0=oracle+ASM1_o000_dbrac)(ENVS='ORACLE_HOME=/crs/11.2.0/grid,ORACLE_SID=+ASM1')(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(enable=setuser))
Wed Jun 01 01:27:07 2011
ERROR: slave communication error with ASM; terminating process 16772
Errors in file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc:
----======================2nd trace file
Trace file /oraeng/app/oracle/product/diag/rdbms/dbrac/DBRAC/trace/DBRAC_ora_16772.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Real Application Clusters option
ORACLE_HOME = /oraeng/app/oracle/product/11.2.0
System name: Linux
Node name: skyit6
Release: 2.6.18-164.el5
Version: #1 SMP Tue Aug 18 15:51:54 EDT 2009
Machine: i686
Instance name: DBRAC
Redo thread mounted by this instance: 0 <none>
Oracle process number: 25
Unix process pid: 16772, image: oracle@skyit6 (TNS V1-V3)
*** 2011-06-01 01:27:07.010
*** SESSION ID:(1.3) 2011-06-01 01:27:07.010
*** CLIENT ID:() 2011-06-01 01:27:07.010
*** SERVICE NAME:() 2011-06-01 01:27:07.010
*** MODULE NAME:(sqlplus@skyit6 (TNS V1-V3)) 2011-06-01 01:27:07.010
*** ACTION NAME:() 2011-06-01 01:27:07.010
ERROR: slave communication error with ASM; terminating process 16772
*** 2011-06-01 01:27:07.035
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=2, mask=0x0)
----- Error Stack Dump -----
----- Current SQL Statement for this session (sql_id=bff5sku8phfgx) -----
create spfile='+dgasmspfile/spfileDBRAC.ora' from pfile
*** 2011-06-01 01:27:07.070
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
skdstdst()+41 call kgdsdst() BF9E05FC ? 2 ?
ksedst1()+77 call skdstdst() BF9E05FC ? 0 ? 1 ? AB80E70 ?
852F42A ? AB80E70 ?
ksedst()+33 call ksedst1() 0 ? 1 ?
dbkedDefDump()+2699 call ksedst() 0 ? 0 ? BF9E0D40 ? 0 ? 0 ?
0 ?
ksedmp()+47 call dbkedDefDump() 2 ? 0 ?
kfTerminateMe()+75 call ksedmp() 2 ? 3 ? F1170AC ? F149234 ?
5 ? BF9E0A6C ?
kfnCheckCommError() call kfTerminateMe() F149234 ? BF9E0C1C ?
+32 B033D83 ? 29392378 ?
F149234 ? EB00601 ?
kfncSlaveSubmit()+5 call kfnCheckCommError() 29392378 ? F149234 ?
83
kfncFileDelete()+11 call kfncSlaveSubmit() BF9E0E5C ? 0 ? F147B24 ?
81
kfioDelete()+126 call kfncFileDelete() 29DEE0 ? 1C ?
ksfddel1()+582 call kfioDelete() 29DEE0 ? 1C ? D ?
ksfddel()+187 call ksfddel1() 29DEE0 ? 1C ? D ? 0 ?
BF9E0F2C ? 9BA2 ?
ksp_spfile_create() call ksfddel() 29DEE0 ? 1C ? D ? 0 ?
+677
kspcspfp()+791 call ksp_spfile_create() BF9E49D4 ? 0 ? 29DEE0 ? 1C ?
7D02 ? 0 ?
kspocte()+67 call kspcspfp() 29DEE0 ? 1C ? F074CC4 ? F ?
61,1 1%
Regards
Dinesh

ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
While connecting as localhost is pretty well.
but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

user11225434 wrote:
Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                05-AUG-2013 09:31:09
Uptime                    0 days 0 hr. 6 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
ner.ora
Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
ml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orclxe" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
Service "orclxeXDB" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
The command completed successfully
# listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\eee
3. My ip is static 192.168.52.170 and window 7 prof. is there.
4. Sir i have tested the remote connection with firewall configuration is off.
Hopefully this info is useful.
but command: sqlplus username@'192.168.52.178:1521/orcl'
NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

Oracle 11g for production

Hi,
I have download oracle 11g for linux.
We have one to create a new database for one of our production system.
Shall I create the database on 11g or wait for some time.(we have tested the application on 10g)
Regards
MMU

Hans and I seem to be giving the same advice here.
The point I was trying to make was to be careful.
There are probably more important things to consider
rather than acting on the urge for the latest and
greatest technology piece.Yes. Perhaps different phrases meaning the same thing help a person understand better,.
After all, the biggest part of an upgrade process is 'understanding risk' and the biggest part of the DBAs job in production is 'mitigating risk'. For Risk Management, the more perspectives, the better.
That is really our job in a nutshell. And that may be why we often have challenges with developer's - their job is to get new capabilities and due to their time pressures they may not be looking at risks the same way. (Just look at how much exception handling the typical developer does.)
Message was edited by: Hans Forbrich
Years ago, a sales rep with whom I worked said "If you want to understand how a person behaves, ask how they are compensated."

Oracle 11g for Visual Studio 2008 errors

I installed llg four(4) times and get the same result: I can't get a Data Connection!!! There is no other Oracle version on this computer and I've cleaned up the registry on all four installs. In order to run SQLNET you must first have a Data Connection! Can someone that has experience with Visual Studio and Oracle 11g installation please tell me what I'm doing wrong? HELP! PLEASE, email me directly at: [email protected] Thanks. Any documentation would be helpful.
Edited by: lam5158 on Sep 23, 2009 3:38 PM

Sorry, you are right and it's my fault. Thanks for the tip. I saw the versions listed when I did the install, but I didn't realize I needed to select any because I thought it would install automatically for whichever VS versions you had installed.
Thanks again! :)

Oracle 11g for Visual Studio 2008

I installed llg four(4) times and get the same result: I can't get a Data Connection!!! There is no other Oracle version on this computer and I've cleaned up the registry on all four installs. In order to run SQL*NET you must first have a Data Connection! Can someone that has experience with Visual Studio and Oracle 11g installation please tell me what I'm doing wrong? HELP! PLEASE, email me directly at: [email protected] Thanks. Any documentation would be helpful.

Excellent test case, may by you should raise an SR and hope it ends up as a bug.
What happens if you "ping box01.data.local" what IP Address do you get back? You should be looking to get back the loopback address.
What happens if you do a nslookup 192.168.30.64 and 192.168.1.100?
Have you tred setting ORACLE_HOSTNAME? Not sure if this is just for the installer or not.

Oracle 11g for Oracle access manager, OID version details

At present we have 1og db for sso and oid. I have checking in db that our exsisting OID and SSO versions are
Oracle9iAS Single Sign-On 10.1.2.0.2
Oracle9iAS Internet Directory
OID 10.1.2.1.0
We are moving to diff hosting solution and vendor is recommanding to have 11g Oracle access manager(in 11g sso is replaced by OAM) and OID.
What is the version of OID with 11g or please refer me to the documentaion where i can greb 11g OAM, oid etc versions

Kapardhi wrote:
Where can i find oracle 11g server for windows7 home basic 64bit version...Oracle 11gR2 is certified on Windows 7 x64 - Professional, Enterprise, and Ultimate editions -- http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm#BGBEEBAD
You can download 11gR2 from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thanks,
Hussein

Oracle 11g for windows7 home basic 64bit version

Where can i find oracle 11g server for windows7 home basic 64bit version...

Kapardhi wrote:
Where can i find oracle 11g server for windows7 home basic 64bit version...Oracle 11gR2 is certified on Windows 7 x64 - Professional, Enterprise, and Ultimate editions -- http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm#BGBEEBAD
You can download 11gR2 from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thanks,
Hussein

Oracle 11g for Ubuntu ?

Hi,
Is Oracle 11g supported on Ubuntu ? which flavor ?
If not, which is the standard Linux distribution Oracle considers fit for Oracle 11g ?
regards
raghav..

See http://www.oracle.com/technology/support/metalink/index.html

Oracle 11g for Linux PC Download

I just downloaded Oracle 11g R1 for LINUX from this OTN site. Do I also get the Enterprise Manager?

Hi,
You can download Oracle Enterprise Manager 11g from:
Oracle Enterprise Manager Downloads
http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
Thanks,
Hussein

HELP! WinXP Clean Install Problems

I want to reformat my computer for the new school quarter but i run a raid configuration with my NEO2 6728 built in promise controller. Everything works fine but i forgot to bring my driver diskette to be used in the F6 portion of the WINXP intallation. I also dont have the driver cd that came with the motherboard (its with the promise driver diskette). If anyone could tell me how to create my own diskette or download the files somewhere, I would appreciate it.
Its the Promise 20378 S-ATA RAID/Ultra Drivers that come bundled with the neo2
thanks!!!

awww....how nice, they even added a instruction file after you unpak the exe:
If you lost your Driver Disk labeled as "Promise 376/378 Driver"
This file will teach you how to make one Driver Disk
First please perpare one formatted 1.44M Floppy
Then please copy necessary driver from MSI Driver CD
- Driver for Win98/ME
Please refer to Win98-ME.txt
Please Copy CDROM:\IDE\Promise\S-ATA\PDC20378\Driver\Win98-ME\ folder
- Driver for Win2000
Please copy CDROM:\IDE\Promise\S-ATA\PDC20378\Driver\Win2000\ folder
    \IDE\Promise\S-ATA\PDC20378\Driver\fasttx2k file
\IDE\Promise\S-ATA\PDC20378\Driver\ULSATA file
     \IDE\Promise\S-ATA\PDC20378\Driver\txtsetup.oem file
- Driver for WinXP
Please copy CDROM:\IDE\Promise\S-ATA\PDC20378\Driver\WinXP\ folder
    \IDE\Promise\S-ATA\PDC20378\Driver\fasttx2k file
\IDE\Promise\S-ATA\PDC20378\Driver\ULSATA file
     \IDE\Promise\S-ATA\PDC20378\Driver\txtsetup.oem file
- Driver for Win2003
Please refer to WS2003.txt
Copy CDROM:\IDE\Promise\S-ATA\PDC20378\Driver\Win2003\ folder
\IDE\Promise\S-ATA\PDC20378\Driver\fasttx2k file
\IDE\Promise\S-ATA\PDC20378\Driver\ULSATA file
\IDE\Promise\S-ATA\PDC20378\Driver\txtsetup.oem file

Oracle Linux 6.2 64bit install problem

Hi all,
I had a installation problem of 64bit Oracle Linux 6.2 with HP proliant dl380 g7 (build-in P410i array controller),
when i try to install the OS, it will keep in black screen after loading the vmlinuz.
I had try the 5.8 32bit version it can pass the vmlinuz.
So, I guess it may be related to driver.
Does any one can help me fix this problem.
thanks,
Kenny

I suggest to try the following:
When the bootloader screen prompts you to press any key to enter the menu... press any key.
Move the cursor to your default Linux kernel, normally Oracle Linux UEK and press the letter 'e'.
Move the cursor down 1 line to the kernel parameter and press the letter 'e' again.
Add the word "nomodset".
If you want to see more details, remove "rhgb quiet"
Press the Enter key when done
Press the letter 'b' to boot the system
If all works, edit /etc/grub.conf and modify the kernel parameter line for a permanent change.

Pls hlp: Oracle 8.16/Forms 6i Install Problems

I am currently running Oracle 8.16 on WIN2K w/o any problems. I want to install Forms and Reports 6i on same machine. Pls tell me how to correctly install Forms and Reports 6i and allow me to use current database in Oracle 8.16.. Thanks

First of all, I wouldn't recommend it. We have many years of experience with Oracle versions 7 through 8i Release 2 and the various incantations of Developer from 2.1 through 6i and the simple fact is that if you try to run them on the same NT system, you will have nothing but headaches. In fact, I would not even run Forms Server and Reports Server on the same machine and definitely NOT either on an 8.1.6 server.
That having been said, begin by reading the 8i Administrator's Guide for Release 2 (8.1.6) for Windows NT. Chapter 3 explains the Optimal Flexible Architecture (OFA, which is a solution to the problem you describe but which cannot easily be retrofit onto even the most current versions of Developer, which use older versions of Net8. This chapter should discourage you even more, but if it doesn't....
Remember that you will need to create your 8.1.6 ORACLE_HOME, FIRST! Install your server there.
Next, install your Forms and Reports Servers:
1. You MUST create a separate ORACLE_HOME for each of these.
2. Don't install these on the same machine as each other or 8.1.6 if you are going to use OEM to start them. In other words, install them as NT services.
3. Ideally (and I mean STRONGLY recommended). Create two adminstrator-level accounts, one for each of Reports Server and Forms Server and do the install as someone in this account. Make sure that you have a default printer set up for the Oracle Reports Server account.
4. Make sure that your DEFAULT ORACLE_HOME is the home of the Forms Server for the Forms Server operation (and the DEFAULT ORACLE_HOME for the REPORTS_SERVER is the Reports Server ORACLE_HOME). This is why you do not want to install these as Administrator. If you do, you'll run into loads of problems with networking.
5. You will need to make note of your NT Registry AFTER the 8.1.6 install but BEFORE the Forms/Reports server install and AFTER the Forms/Reports server install. The registry entries for Oracle products changed with OFA so you will end up with a hybrid of the pre-OFA (Forms/Reports registry) and the OFA registry. Since software using the former will not look for keys created by the latter, make sure that you enter your configuration details (such as REPORTS60_REPORTS_SERVER) in the right branch or things won't work and you won't know why.
Again, I would strongly recommend that you don't do this, but rather, you get a couple of dedicated machines to run the Forms and Reports Server.
Also, if you are going to make either of these accessible via the Web, you will need to consider your WebDb (or alternative) setup as well.
FYI, after trying NUMEROUS configurations with these, we now run 8.1.6, Forms Server and Reports Server on three different machines and run the Web CGI's for Forms and Reports on a fourth machine. That is what I would recommend that you do.

Oracle VM Server 2.2 Install Problems (Management Info Screen Skipped)?

Hi,
I am new to Oracle VM Server and I basically following the install guide to install the server on a spare machine we have in the office (a relatively new Dell with an i7 processor and 8gb memory) so we can evaluate it and play with it a bit.
When running the install from a bootable CD everything goes as expected and documented in the install guide up to point number "11. The Oracle VM Management Interface screen is displayed." - when we install it skips these screens and jumps directly to step "15. TimeZone Selection."
We continued with the install but when the VM Server comes up we have no network enabled?
Any help would be greatly appreciated.
Regards,
Bren

Hi BOF,
if the network screen is not displayed during installation, the network card could not correctly be identified, and it may be that the network drivers are not installed.
If you are lucky, the network is still detected and working, but not with the correct drivers.
Did you use OVM Server 2.2. or the latest 2.2.1 (which includes some more network card detections?).
Otherwise I recommended getting the correct network drivers for the card and installing them after the server is running.
Keep in mind, that OVM Server 2.2 is based on OEL 5.3 (respectivly RHEL 5.3) if you are looking for the correct drivers.
Maybe this thread on realtek network cards can give you some more information:
oracle vm - network issue
Regards
Sebastian

Oracle 11g for WinXP VirtualMachine install problem

Similar Messages

Maybe you are looking for