Oracle 11g On Suse Linux 9.1

Hi all,
I have downloaded both Oracle 11g and Oracle Application Server 10g Release 2 from Oracle Website. I am using Suse linux 9.1. I am having problems in installing Oracle 11g on it.
Please somebody help me.
Thanks in advance.

You're using an unsupported Linux-distro... Check
http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#CIHFICFD
to see you need at least "SUSE Linux Enterprise Server 10.0".

Similar Messages

Error when Installing Oracle XE on Suse Linux 10.0

I am installing Oracle xe on Suse Linux 10.0.
I get following error.
gthomas@linux:~/oraclexe> rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm
error: cannot get exclusive lock on /var/lib/rpm/Packages
error: cannot open Packages index using db3 - Operation not permitted (1)
error: cannot open Packages database in /var/lib/rpm
Please help
George

I found another thread in this forum where you can look up how to extend your swap space (look at the bottom of that thread):
re:Out of swap space during 9iAS install.
I am very new to Linux, I am very much disappointed,
I installed Linux with lots of hopes that I can
Install Oracle tools easily on Linux and work
comfortably. Now If I cannot intall a small database
Oracle XE, even with 1GB Ram and 25GB harddrive on
Linux, I don't realize why people run for Linux.
I could Oracle XE on windows on a machine with 512
mb ram in 4 minutes.Maybe you should take into consideration that you are not so "new" to windows and that each new system has a learning curve.
Someone please help.. in detail. How to resize the
swap partition at this point.Look in the provided link.
I have very limitted or no knowldge in Linux.Maybe you should change that or stay with what you know. I don't see any other way ...
As a sidenote, each command under Linux does have a so called "man" page (from manual). You also need to open a shell to access those commands as shown in the thread.
And please, take a look at the commands in that thread before you start implementing, since for example the dd command seems only to create a file with a size of 512M.
Knowing how to use a search engine would also be a valuable asset in your current position.
C.

How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

Problem in Installing oracle 11g in enterprise linux

Hello all,
Iam new to linux and oracle .... I had downloaded enterprise linux from oraclewebsite, My question is i was not able to install oracle 11g in enterprise linux...
And when i am trying to install ./runInstaller
iam getting error message (permission denied).
is that necessary to install oracle vm server or manager .. if so how to do it .. Please give me clear idea how and where to start..

Hi,
The error message which iam getting is
[root@Karthik database]# ls -la
total 48
drwxr-xr-x 8 root root 4096 Sep 10 15:42 .
drwxr-xr-x 3 root root 4096 Sep 10 15:40 ..
drwxr-xr-x 12 root root 4096 Sep 10 15:42 doc
drwxr-xr-x 4 root root 4096 Sep 10 15:42 install
drwxr-xr-x 2 root root 4096 Sep 10 15:42 response
drwxr-xr-x 2 root root 4096 Sep 10 15:42 rpm
-rwxrwxrwx 1 root root 4352 Aug 13 23:56 runInstaller
drwxr-xr-x 2 root root 4096 Sep 10 15:42 sshsetup
drwxr-xr-x 14 root root 4096 Sep 10 15:46 stage
-rw-r--r-- 1 root root 5400 Aug 17 12:25 welcome.html
[root@Karthik database]# ./runInstaller
./runInstaller: line 137: /root/Desktop/linux_11gR2_database_1of2/database/install/.oui: Permission denied
The command
bash ./runInstaller.sh didnt helped. again got the error of bash: ./runInstaller.sh: No such file or directory
Thanks,
karthik

Installation of Oracle 11g R2 in Linux.........Step By Step

Oracle 11g R2 installtion in Linux
Author: Arun
For Reference:
http://www.morganslibrary.org/reference/linux_oracle_inst11gR2.html
Operating System Configuration
1.As root: Install RPM’s
For RHEL 5 (32-bit):
rpm -Uvih binutils-2*
rpm -Uvih compat-libstdc++-33*
rpm -Uvih elfutils-libelf-0*
rpm -Uvih elfutils-libelf-devel-0*
rpm -Uvih elfutils-libelf-devel-static-0*
rpm -Uvih gcc-4*
rpm -Uvih gcc-c++-4*
rpm -Uvih glibc-2*`uname -p`*
rpm -Uvih glibc-common-2*
rpm -Uvih glibc-devel-2*
rpm -Uvih glibc-headers-2*
rpm -Uvih kernel-headers-2*
rpm -Uvih ksh-20*
rpm -Uvih libaio-0*
rpm -Uvih libaio-devel-0*
rpm -Uvih libgcc-4*
rpm -Uvih libgomp-4*
rpm -Uvih libstdc++-4*
rpm -Uvih libstdc++-devel-4*
rpm -Uvih make-3*
rpm -Uvih numactl-devel-0*
rpm -Uvih sysstat-7*
rpm -Uvih unixODBC-2*
rpm -Uvih unixODBC-devel-2*
For RHEL 5 (64-bit):
rpm -Uvih binutils-2*`uname -p`*
rpm -Uvih compat-libstdc++-33*`uname -p`*
rpm -Uvih compat-libstdc++-33*i386*
rpm -Uvih elfutils-libelf-0*`uname -p`*
rpm -Uvih elfutils-libelf-devel-0*`uname -p`*
rpm -Uvih gcc-4*`uname -p`*
rpm -Uvih gcc-c++-4*`uname -p`*
rpm -Uvih glibc-2*`uname -p`*
rpm -Uvih glibc-2*i686*
rpm -Uvih glibc-common-2*`uname -p`*
rpm -Uvih glibc-devel-2*`uname -p`*
rpm -Uvih glibc-devel-2*i386*
rpm -Uvih glibc-headers-2*`uname -p`*
rpm -Uvih ksh-20*`uname -p`*
rpm -Uvih libaio-0*`uname -p`*
rpm -Uvih libaio-0*i386*
rpm -Uvih libaio-devel-0*`uname -p`*
rpm -Uvih libaio-devel-0*i386*
rpm -Uvih libgcc-4*`uname -p`*
rpm -Uvih libgcc-4*i386*
rpm -Uvih libstdc++-4*`uname -p`*
rpm -Uvih libstdc++-4*i386*
rpm -Uvih libstdc++-devel-4*`uname -p`*
rpm -Uvih make-3*`uname -p`*
rpm -Uvih numactl-devel-0*`uname -p`*
rpm -Uvih sysstat-7*`uname -p`*
rpm -Uvih unixODBC-2*`uname -p`*
rpm -Uvih unixODBC-2*i386*
rpm -Uvih unixODBC-devel-2*`uname -p`*
rpm -Uvih unixODBC-devel-2*i386*
2.As root: Create DBA Group and Oracle User
/usr/sbin/groupadd -g 500 oinstall
/usr/sbin/groupadd -g 501 dba
/usr/sbin/groupadd -g 502 oper
/usr/sbin/useradd -u 500 -m -g oinstall -G dba,oper oracle
id oracle
-- set the password to oracle1
passwd oracle
3.As root: Create Installation Directories
mkdir -p /app/oracle
chown -R oracle:dba /app/oracle
chmod -R 775 /app/oracle
mkdir /stage
chown -R oracle:dba /stage
4.As root: Alter Kernel Parameters
Vi /etc/sysctl.conf
Place this parameters in the end of the file.
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.core.rmem_default = 4194304
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.tcp_wmem = 262144 262144 262144
net.ipv4.tcp_rmem = 4194304 4194304 4194304
fs.aio-max-nr = 1048576
net.ipv4.ip_local_port_range = 9000 65500
EOF
-- Activate changes
/sbin/sysctl -p
5.As root: Set Shell Limits
-- Modify limits.conf
Vi /etc/security/limits.conf
Place these lines in the end of the file.
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
EOF
6.As root:set Logins
-- Modify /etc/pam.d/login
Vi /etc/pam.d/login
session required pam_limits.so
7.As root: Change Default Profile
Vi /etc/profile
if [ $USER = "oracle" ]; then
if [ \$SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
umask 022
fi
EOF
8.As root: Append servers to hosts file
Vi /etc/hosts
Add this lines
127.0.0.1 localhost.localadmin localhost
10.0.0.33 insight33.acolade.com.au insight33
9.As root: Modify .bashrc
# cd /home/oracle
vi .bashrc
-- append the following:
umask 022
ORACLE_HOSTNAME=?.mlib.org
ORACLE_BASE=/app/oracle/product
ORACLE_HOME=/app/oracle/product/11.2.0/db_1
ORACLE_SID=?
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
TMP=/tmp
TEMP=/tmp
TMPDIR=/tmp
PATH=$ORACLE_HOME/bin:$PATH
export PATH ORACLE_BASE ORACLE_HOME ORACLE_SID LD_LIBRARY_PATH
export TMP TEMP TMPDIR
alias oh='cd $ORACLE_HOME'
alias sql='sqlplus "/ as sysdba"'
-- close all open terminal windows and open new ones
$ set
-- validate the environment
10.Run the file for to start Installation
Unzip the oracle file in “tmp” folder.
After unzipping the installation files, change the user as “oracle” and take “database” folder.
Su oracle
cd /tmp/database/
./runInstaller
Note:If any one of the checking is failed during installation starting,take new terminal and use
Su root
Xhost +SI:localuser:oracle

According http://download.oracle.com/docs/cd/E11882_01/install.112/e16765/pre_install.htm#BABCFBDG it is not not.
Minimum system requirements are for Linux x86 and x86-64 are:
Oracle Enterprise Linux 4 Update 7
Oracle Enterprise Linux 5 Update 2
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
Since you are running *5.1* you need to perform an upgrade

Installation problem Oracle 9i on SuSE Linux 7.2 s390

Hi all
I've got a problem after having installed Oracle9i on a S390 box with SuSE linux 7.2. When I launch sqlplus, I've got the following message :
sqlplus: error while loading shared libraries: libclntsh.so.9.0: cannot load shared object file: No such file or directory
It appears the shared library libclntsh.so.9.0 was not included in the tarball I've downloaded from the Oracle site.
Any idea ?
Thanks
Frangois Basquin

Forget my question : I've found the answer in the document ID 158104.1. Even if my problem was not exactly the one mentioned (I hadn't any problem during compile time), the cure was good.
Frangois

Problem with installing Oracle 10g on Suse Linux

Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fiction

Yes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again.

Installation: Oracle 10g on SUSE Linux 10.1

Can this be? I sat for hours preparing my all new clean SUSE Linux 10.1 server for the installation of Oracle 10g (Standard Edition)... and when running the installer it simply tells me that SUSE 9 is needed...
I've found others here in the forum having experienced the same.
Maybe I just downloaded the wrong version of Oracle?
The main download page is at:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
I selected entry "Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86" (the one directly below the Windows version):
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html
The size of the file^^ is 668,734,007 bytes.
Or should i have downloaded entry "Oracle Database 10g Release 2 (10.2.0.2) for z/Linux":
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10202zlinuxsoft.html
The size of the file^^ is 838,518,746 bytes.
By the way, all these versions on the main page should have some kind of description, something like "This is the Linux Version for most standard 32Bit single and multiprocessor Intel compatible servers."
Well, since I'm completely stuck now with SUSE 10.1, is there any way to make the Oracle installer go on that SUSE version? Maybe SUSE can pretend to be version 9... but how do I achieve something freaky as this?
Thanks for any help, comments, suggestions...
Karsten

BTW, I think it's bad practice by Oracle not supporting SUSE 10.1.Actually, I think it is good practise for Oracle not to certify the public beta versions of an operating system.
Please remember that Fedora and SuSE Linux are cycled every 6-8 months, making then truly unstable for commercial purposes. IN addition, they are often desupported by the comminuty within 2-3 years, forcing upgrades. And finally, Both Red Hat and SuSE/Novell publically state that these are 'proving grounds for new features' (meaning they are beta).
Certification means that Oracle will invest heavily and train people on the specific operating system and work with the operating system supplier, 24x7 if needed, to make sure that customers will continue in production. I am not aware that the SuSE Linux or Fedora supporters are willing to put in 24x7 support they way the Red Hat and SuSE Enterprise groups are.
This does not imply the public OSs are bad. It just means that Oracle (and I) believe they are unsuited for commercial, business mission critical, immediate support required, environments.
By the way, I have the combination of Oracle10g and SuSE Linux 10.1 working, and it works well. However, I did need to make sure that the libraries to which Oracle10g was compiled are available in the OS.
Or maybe Sybase does better.... ;-pNot if the [glibc] libraries are incompatible. Nor does PostgreSQL nor MySQL.

Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment

We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB.
- Frest installation of oracle 11g using export/iimport dumps
- Migration
- Upgrade process
Any information regarding this will be appreciated.

Pl identify exact versions of "10g" and "11g", along with the exact OS versions.
Pl see the upgrade doc - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
HTH
Srini

Install Oracle 10g on Suse Linux Enterprise Server 10

Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?

Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.

Oracle 11g installation on Linux Enterprise 5 remains hanging at 43%!

Hi all,
as per Subject, I have installed a Linux Enterprise 5 OS downloaded by Oracle Download Center and it is now installed following the nice Guide here.
I have added the missing Linux packages and set up the kernel parameters as per Guide quoted above.
If I launch the Oracle installation, it completes the packages and parameters check fine, install goes fine until 43% and then hangs.
It's not freezing as the Installation window shows ongoing animations, if I try to stop installation it responds immediately asking for confirmation.
It just hangs up!
The Linux machine is actually on a VMWare image on a MacOS Leopard host.
I have tried it on my laptop and desktop as well, but the hang point keeps being the same.
Any idea?
Thanks in advance.

Satish Kandi wrote:
Can you post last 10 lines from the installation log? That might provide some clue.Sure.
I will copy more that last 10 lines as last 10 lines do not look too descriptive to me.
This will contain also my Installation abort.
Summary
Global Settings
Source: /mnt/hgfs/Oracle/database/install/../stage/products.xml
Oracle Base: /home/oracle/app/oracle
Oracle Home: /home/oracle/app/oracle/product/11.1.0/db_1 (OraDb11g_home1)
Installation Type: Enterprise Edition
Product Languages
English
Space Requirements
/ Required 3.43GB (includes 224MB temporary) : Available 30.10GB
New Installations (125 products)
Oracle Database 11g 11.1.0.6.0
Enterprise Edition Options 11.1.0.6.0
Oracle Partitioning 11.1.0.6.0
Oracle Spatial 11.1.0.6.0
Oracle OLAP 11.1.0.6.0
Oracle Database 11g 11.1.0.6.0
Oracle Text 11.1.0.6.0
Oracle Net Services 11.1.0.6.0
Oracle Enterprise Manager Console DB 11.1.0.5.0
Oracle Net Listener 11.1.0.6.0
HAS Files for DB 11.1.0.6.0
Oracle Call Interface (OCI) 11.1.0.6.0
Enterprise Manager Agent 10.2.0.3.1
Oracle Programmer 11.1.0.6.0
Oracle Database Gateway for ODBC 11.1.0.6.0
Oracle Advanced Security 11.1.0.6.0
Oracle JVM 11.1.0.6.0
Database Configuration and Upgrade Assistants 11.1.0.6.0
Oracle XML Development Kit 11.1.0.6.0
Generic Connectivity Common Files 11.1.0.6.0
Oracle Multimedia 11.1.0.6.0
Oracle Multimedia Locator 11.1.0.6.0
Oracle Internet Directory Client 11.1.0.6.0
Oracle Database Utilities 11.1.0.6.0
Secure Socket Layer 11.1.0.6.0
PL/SQL 11.1.0.6.0
Oracle Recovery Manager 11.1.0.6.0
Oracle Net 11.1.0.6.0
Assistant Common Files 11.1.0.6.0
Installation Common Files 11.1.0.6.0
Enterprise Manager plugin Common Files 11.1.0.5.0
Oracle LDAP administration 11.1.0.6.0
SQL*Plus 11.1.0.6.0
HAS Common Files 11.1.0.6.0
Oracle Help for the Web 2.0.14.0.0
Oracle UIX 2.2.20.0.0
Precompiler Common Files 11.1.0.6.0
Oracle Clusterware RDBMS Files 11.1.0.6.0
Cluster Verification Utility Common Files 11.1.0.6.0
Oracle Wallet Manager 11.1.0.6.0
Oracle Security Developer Tools 11.1.0.6.0
XML Parser for Java 11.1.0.6.0
Enterprise Manager Minimal Integration 11.1.0.6.0
Oracle Database User Interface 2.2.13.0.0
SQL*Plus Files for Instant Client 11.1.0.6.0
Oracle ODBC Driver 11.1.0.6.0
Required Support Files 11.1.0.6.0
Database SQL Scripts 11.1.0.6.0
OLAP SQL Scripts 11.1.0.6.0
PL/SQL Embedded Gateway 11.1.0.6.0
Oracle Globalization Support 11.1.0.6.0
Character Set Migration Utility 11.1.0.6.0
Oracle Locale Builder 11.1.0.6.0
Secure Socket Layer 11.1.0.6.0
Oracle Java Client 11.1.0.6.0
Oracle JDBC/THIN Interfaces 11.1.0.6.0
Oracle Multimedia Client Option 11.1.0.6.0
Oracle Universal Connection Pool 11.1.0.6.0
Oracle Notification Service 11.1.0.5.0
Oracle Code Editor 1.2.1.0.0I
Oracle Ultra Search Server Rdbms 11.1.0.6.0
Oracle Help For Java 4.2.9.0.0
Oracle Containers for Java 11.1.0.6.0
JAccelerator (COMPANION) 11.1.0.6.0
Database Workspace Manager 11.1.0.6.0
SQLJ Runtime 11.1.0.6.0
Oracle Core Required Support Files 11.1.0.6.0
Platform Required Support Files 11.1.0.6.0
Oracle Ice Browser 5.2.3.6.0
Oracle Application Express 11.1.0.6.0
Oracle SQL Developer 11.1.0.6.0
Oracle JDBC Server Support Package 11.1.0.6.0
regexp 2.1.9.0.0
Enterprise Manager Common Files 10.2.0.3.1
Installation Plugin Files 11.1.0.6.0
Oracle JDBC/OCI Instant Client 11.1.0.6.0
XML Parser for Oracle JVM 11.1.0.6.0
Oracle XML Query 11.1.0.6.0
Oracle Message Gateway Common Files 11.1.0.6.0
Oracle Starter Database 11.1.0.6.0
Sample Schema Data 11.1.0.6.0
Precompiler Required Support Files 11.1.0.6.0
Parser Generator Required Support Files 11.1.0.6.0
Oracle Multimedia Locator RDBMS Files 11.1.0.6.0
Oracle Globalization Support 11.1.0.6.0
Oracle Multimedia Annotator 11.1.0.6.0
Oracle Multimedia Java Advanced Imaging 11.1.0.6.0
Oracle Database 11g Multimedia Files 11.1.0.6.0
Agent Required Support Files 10.2.0.3.1
Oracle 11g Warehouse Builder Server 11.1.0.6.0
Oracle Ultra Search Server 11.1.0.6.0
Oracle Ultra Search Middle-Tier 11.1.0.6.0
Oracle Ultra Search Common Files 11.1.0.6.0
Perl Interpreter 5.8.3.0.4
RDBMS Required Support Files 11.1.0.6.0
Oracle Display Fonts 9.0.2.0.0
RDBMS Required Support Files for Instant Client 11.1.0.6.0
Enterprise Manager Agent Core Files 10.2.0.3.1
Enterprise Manager Common Core Files 10.2.0.3.1
Enterprise Manager Grid Control Core Files 10.2.0.3.1
Enterprise Manager Database Plugin -- Agent Support 11.1.0.5.0
Enterprise Manager Database Plugin -- Management Service Support 11.1.0.5.0
Enterprise Manager Repository Core Files 10.2.0.3.1
Enterprise Manager Database Plugin -- Repository Support 11.1.0.5.0
Provisioning Advisor Framework 10.2.0.3.1
XDK Required Support Files 11.1.0.6.0
Oracle RAC Required Support Files-HAS 11.1.0.6.0
SQL*Plus Required Support Files 11.1.0.6.0
Oracle JFC Extended Windowing Toolkit 4.2.36.0.0
Oracle Extended Windowing Toolkit 3.4.47.0.0
Oracle OLAP API 11.1.0.6.0
Oracle OLAP RDBMS Files 11.1.0.6.0
Oracle Data Mining RDBMS Files 11.1.0.6.0
Oracle Real Application Testing 11.1.0.6.0
Bali Share 1.1.18.0.0
Buildtools Common Files 11.1.0.6.0
Oracle Net Required Support Files 11.1.0.6.0
SSL Required Support Files for InstantClient 11.1.0.6.0
LDAP Required Support Files 11.1.0.6.0
Oracle ODBC Driverfor Instant Client 11.1.0.6.0
Oracle Configuration Manager 10.2.6.0.0
Oracle Universal Installer 11.1.0.6.0
Oracle One-Off Patch Installer 11.1.0.6.0
Installer SDK Component 11.1.0.6.0
Sun JDK 1.5.0.1.1
INFO: Method 'dispose()' Not implemented in class 'OiCcrCsi'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'EE'.
INFO: Link phase has been specified as needed
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/app/oracle/product/11.1.0/db_1/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/app/oracle/product/11.1.0/db_1/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
Thanks :)

OTN for Oracle 11g R2 for Linux x86_64 "See All" link does not work

I'm trying to view all of the downloads for LInux x86_64 Oracle 11g R2. When I select the link I get the following message:
An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator
Can someone please investigate this issue.
Thanks

user457508 wrote:
An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administratorThis is somewhat reminiscent of the problems we faced a few months back. While you are waiting for someone to investigate, you can also try:
- log out of OTN completely
- clear all cookies and cached files in your browser
- log back in again
- try again

Oracle 11g installation for Linux

Hello,
I am new to Oracle and Linux and assigned the task to install Oracle 11g on Linux enterprise edition. How do I install 11g on Linux ? I am also planning to install Oracle Application Express on the Linux machine. How do I accomplish these task? Is there any steps by steps intruction?
Thank you,
Harish

Yes there is. The Oracle documentation site can be found at:
http://tahiti.oracle.com
Go to that link, and select your version (11g Release 1 or Release 2), and then select the "Installation" link.
From there you should find everything you need :)

Database is very slow in oracle 9i with Suse Linux

Hello All,
We are using Suse linux and installed Oracle 9i on it. Our ERP product is running on this database. It is very slow. But linux configuration seems Ok. Oracle's performance is very slow. But The same thing is working fast in oracle 8.1.6 and 8.1.7. Is there any special linux configuration parameters should we consider for this or we have to do something in init.ora file?. I added the size of the JAVA_POOL_SIZE, SHARED_POOL_SIZE and LARGE_POOL_SIZE to 300 MB each.
Thanks in advance and expecting your reply.
with regards,
sivababu

Which version of SuSE Linux would possibly help here. I'm using version 7.3 Pro and it is only 10 minutes slower than my installation on XP Pro (the script is 16 pages long and takes 8,000,000 records and converts them into 30,000 records of useful information-takes 20 minutes in XP, 30 minutes in SuSE 7.3 on a personal computer). I used the orarun9i script and followed the directions for re-compiling the genclntsh from the SuSE installations online.

Help to install oracle XE in suse linux 10.2

I have suse 10.2 installed in my laptop.
I downloaded the rpm for oracle XE and installed it by logging on as root
I ran the configuration to give 8080 as port etc.
Then i ran the ./.bash_profile script.
I am unable to login to sqlplus home page.
I am in a fix , as I seem to be missing something.
Using K menu/application and from there(graphical) when i say start database,
i get the message
Operation failed, root is not a member of 'dba' group.
I cant make sense out of this.
Can someone help me out.
if u need more info, do email me on [email protected]
or reply to this thread.

I have a Hp DV6000z laptop with the following config
AMD turion TL56 1.8GHz
2GB DDR ram
Nvidia Geforce Go7200 (256 MB)
a/b/g wireless with bluetooth
built in webcam
I had vista pre configured in my laptop.
I used Vista Boot pro to resize the partition.
I allocated 40GB hdd space for linux.
I installed Suse 10.2 and the OS works fine.
I wanted to install Oracle XE (Oracle 10g express edition) in my suse linux.
I was able to install Oracle XE in my vista, and it runs good.
#############I follwed the steps to install the rpm for oracle XE###
I logged in as root.
I downloaded the rpm for oracle XE from oracle website
i ran this command
rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
then i ran the command for configuring
$ /etc/init.d/oracle-xe configure
gave the default settings(i.e port 8080 , password etc..
then I went to
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
and from there ran the script file
. ./oracle_env.sh
the instruction says....
You may also want edit your login or profile files so that these environment variables are set properly each time you log in or open a new shell.
For Bourne, Bash, or Korn shell, enter the following line into the .bash_profile (to log in) or .bashrc file (to open a new shell):
. /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
For C or tcsh shell, enter the following line into the .login file (to log in) or .cshrc file (to open a new shell):
source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.csh
Where do I find the .bash_profile file in suse 10.2?
is this the final step to start working on my database...?
has anyone worked on this before?
****************************************8
I found .bashrc in the home folder of the user vikram. I did not find .bash_profile
I added the line in the .bashrc file.
I also added root and vikram as members of dba group
When i run sqlplus and give username SYSTEM and password what I set.
I get the error message
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
the isqlplus webpage is not getting displayed either.
I dont seem to understand the problem.
further in instruction...
It also says...
You can find the database creation logs in $ORACLE_HOME/config/log/*.
I cant find this path in my system...
Using K menu/application and from there(graphical) when i say start database,
i get the message
Operation failed, root is not a member of 'dba' group.
I am unable to see the webpage for sqlplus, nor am i able to log in to sqlplus with sys or system as user name and password i provided
Has some one installed oracle, please tell me what I am missing.
email [email protected], or reply to thread, to help me out.
I am unable to de install oracle.
Can someone tell me how to do that as well.
I also need help in this regard.
I want to install graphics drivers for nvidia Geforce go7200.
please give steps to do so.
I want to install drivers/able to use my wireless card.
a/b/g wireless
I want to install drivers for my webcam.
Can someone tell me the fixes for my problems!!!
thanks in advance

Oracle 11g On Suse Linux 9.1

Similar Messages

Maybe you are looking for