Oracle 11g R2 Grid Control Installation on AIX 6
hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & Regards
user13672598 wrote:
hi,
is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
Thanx & RegardsHi
Grid Control is only available in 11GR1.
I have an installation walkthrough on my Blog. It is on http://managingoracle.blogspot.com in the section September 2010
There are more related Blog entries also.
Success!!
FJFranken
Edit: P.S. Welcome to this Forum
Edited by: fjfranken on 11-jan-2011 6:18
Similar Messages
-
Oracle 11g R2 Grid Infrastructure Installation stuck on 65%
Dear All,
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
Many Thanks
NukeshNo nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
Actually I found/resolved the problem and forgot about this post.
It happens that in staging my server, iptables was enabled which stopped the progress.
I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
Thanks -
Errors in Oracle 11g R2 Grid Infra Installation
Hi all,
I went through the steps to install Oracle 11g R2 Infrastructure on RHEL 5.2 (32-bit) in a couple of Vmware machines.
- As I relied on the Vmwaretool for time sync, I didn't configure SNP.
- As I don't have a DNS server, I configured the scan-rac in /etc/hosts.
I know in production this is wrong, but for this testing env it is Ok (according to http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php)
All the configuration went Ok and the OUI went on successfully till
it reached to the last step: "Oracle Cluster Verification Utility" which, as expected, failed.
It generates the following long and complicated log: http://www.ahmedbaraka.com/temp/installActions.txt
My question is: Did all the errors in the log result only from the SNP and SCAN issues? Is there any other discovered issues?
Thanks in advance.this could be just from ntp.
The following note might be of assistance:
CTSSD Runs in Observer Mode Even Though No Time Sync Software is Running [ID 1054006.1] -
The Grid control installer has inside an Oracle Server ?
Hi
The Grid control installer has inside an Oracle Server to create the Repository Database or I have to install and Oracle Server before ?
ThanksI have installed both Grid Control and with GC 11g and WebLogic Server and I don't recall creating the respository before the install.
You will have to choose which install you are going to use. Grid Control 11g requires WebLogic Server install.
Grid Control 11g >>> http://download.oracle.com/docs/cd/E11857_01/index.htm
Grid Control 10g >>> http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm
KDSDBA
OCP -
OEM 11g Grid Control installation for 10g R2 database
Hi ,
I am new with oracle enterprise manager grid control ,
I have 3 questions ,
1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
I will really appreciate if someone can help me with these details , thank you.1. My customer is using windows server 2008 with oracle 10g R2 database , can I install OEM 11g R2 to monitor all the 10g databases ?
Yes
2. I found only 32 bit installers for windows , where as they are using 64 bit OS , is it fine to install 32 bit OEM in a 64 bit OS ?
Yes
3. Do they require any separate license for OEM 11g , they have license for oracle 10g database ?
You don't need any license to use OEM 11g, however you do need licenses to use Management Packs
Checkout:
Oracle® Enterprise Manager Licensing Information
11g Release 1 (11.1)
http://download.oracle.com/docs/cd/E11857_01/license.111/e11987/toc.htm
Regards
Rob
http://oemgc.wordpress.com -
How to monitor Oracle Glassfish with Grid Control 11g
Hi,
Could someone tell me how can i monitor Oracle Glassfish with Grid Control 11g ?? i think i need a plug-in but i don't know where could i download it
I guess the information i can monitor depends on the plug-in :)
Regards
CarlosHi Carlos,
We do have partners that routinely write plug-ins to extend OEM. If you take a look at the EM Extensibility Exchange below, you will find various extensions that partners such as Blue Medora have written:
http://apex.oracle.com/pls/apex/f?p=34841:1:26399399216901:::::
Please keep in mind though that between SLM and JVM diagnostics, you would have a significant amount of visibility even without the Glassfish target.
Cheers,
Glen -
hi
i am trying to install the OEM grid control on my machine configured with statis IP address
After installation when configuration assistants start to configure. i face the following error continuously.
java security configuration assistan fails with the following errors
jaznca.log at "E:\oracle\product\10.1.0\em\cfgtoollogs" contains the following
Oracle JAAS [Fri Mar 10 18:01:55 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: oracle.ias.sysmgmt.exception.TaskException: TaskMaster initialization failed.
Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
Resolution: check the system configuration and make sure that the client can access the repository database.
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
I started the OPMN manually and clicked on RETRY to configure this assistant. again failed and now
jaznca.log contains the following
Oracle JAAS [Fri Mar 10 18:06:50 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: java.lang.Exception: At instance:EnterpriseManager0.lhrpc419.lhr.systemsltd.com Error:See base exception for details.
Base Exception:
oracle.ias.sysmgmt.exception.TaskException:OPMN process startup has timed out.
Resolution: Try starting the OPMN process using the command line utility "$ORACLE_HOME/OPMN/bin/OPMNctl start". If the OPMN process does not start check the log files in $ORACLE_HOME/OPMN/logs for more information.See base exception for details.
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
ons.log at "E:\oracle\product\10.1.0\em\opmn\logs" contains following
06/03/10 18:05:32 [4] ONS server initiated
06/03/10 18:05:47 [4] Logging disabled
06/03/10 18:05:49 [4] ONS server initiated
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [2] 0.0.24.56:6200 - listener BIND failed
06/03/10 18:05:49 [4] Listener thread 860: 192.168.0.70:6200 (0x401) terminating
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [1] Local listener terminated
can you guide that how to catter with this?
regardsAre you doing the Grid Control installation into a new Oracle Home? I would try a fresh installation...Typically, the installation itself is fairly straightforward..
-
10g R2 Grid Control Installation
Hi,
I want to go for 10g R2 Grid Control Installation...
I have setup like this
Software:
Oracle 10g R2 Grid Controller
Oracle 10g R3 patchset
Hardware:
Small PC with 2 GB RAM and 80 GB HDD
Target Nodes:
Oracle Applications Database Tier Node with 10g Database
Oracle Applications Tier Node
Oracle 9i Database standaalone
==========================
I want to install the 10gR2 Grid control on the SMALL PC on Linux...
I will Apply the Patchset 10g R3 on top it...
Then I want to install the OEM Grid Control Agent in Target Nodes...Where can I get this software...Please sched some light on thisHi,
Cannot we install 10gR2 Grid Control on Existing
Target Database Server in a seperate Oracle Home with
a seperate user for installation..It is adviceable to use the same oracle user in a different Oracle Home. -
Configuration Assistant failed during OEM 10g Grid control installation
Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha -
Please provide the patch set for Oracle Enterprise Manager Grid Control 10
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com -
10g Grid Control Installation/configuration on RAC
Hi Experts,
I am new to RAC and I need your help.
I need to configure 2 node RAC and install/configure Oracle 10g Grid control (High Availability) on HP-UX Itanium servers. Is there any good document or link?
Thank You all in advance
BellHi Bell,
Here is the link for the 10gR5 Grid Control Installation Guide: http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm
Considering the GC repository is a RAC database you will be performing the "+Using an Existing Database+" installation type.
I would highlight the below part of the documentation:
To view a list of certified Oracle Database, see Document ID 412431.1 on My Oracle Support (formerly Metalink).
If you want to use a RAC database, which is configured on a virtual host, as the existing database, then refer to Document ID 561441.1 on My Oracle Support (formerly Metalink).
HTH,
Regards,
Jozsef
Edited by: Jozsef on Oct 22, 2010 12:14 AM -
10g Grid Control Installation/Configuration
I want to install and configure the 10g grid control agent in our environment.
Is there any step by step document for installation and configuration.[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha -
Certification AMP for Oracle EBS on Grid Control v10.2.0.5
Hi,
Our company is currently using Grid Control v10.2.0.2 and different agent versions on 32-bits linux servers.
We are using this version for about 3 years and now we want to start with a fresh Grid Contol enviroment so started a new project.
The goal of the project is to use the latest version of Grid Control and 64bits linux servers, but also to monitor our EBS enviroments.
Is Oracle currently working to certify AMP(3.0) for Oracle Ebs for Grid Control 10.2.0.5 and agents version 10.2.0.5 on 64-bits linux servers??
I searched OTN and metalink but couldnt find anything about it.
greetingsHi,
You can check this Doc :Installing Enterprise Manager Grid Control
Section. Installing Enterprise Manager Grid Control Using an Existing Database its included RAC database also.
HTH -
Grid Control installation for 11G: is 10g grid required ?
Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.user6116850 wrote:
Dear All,
We are currently using the local dbconsole for the monitoring and doing administrative work on our 11g database. My limited experience and observation indicates that 11G does not have its own enterprise Grid control yet and it requires the older 10G grid control ? So if we deploy (albeit successfully 10G grid control), does the enterprise manager control tabs will be very different than the current dbconsole in 11G ?
Thanks.Upgrade Grid Control to 10.2.0.5. Grid Control is an independent product and will not follow the same numbering as Database and App Server/Fusion.
It will provide a lot of extra pages and tabs anyway. And it will format and present the information for Oracle 11g properly to work in it's pages.
Try it and see.
and ask Grid Control questions in the Grid Control forum for better Grid Control answers. -
Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0
I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
RajActually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink.
Maybe you are looking for
-
Hello, I created a view object (which bases on an entity object) that I'd like to use for searching for records in a table called "CARS". Cars will be searched by names. I also have a JSP page for adding cars (administration functionality). The situa
-
Purpose of transaction code MB52
what is the purpose of Transaction code MB52
-
Problem using template in database configuration assistant Oracle 10g
Hi, I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (whic
-
App Conflicts downloading the newer Dreamweaver CC against exisiting CS5.5 Trial Version
Good afternoon, I am currently using a Mac Book Pro OS 10.10.1 with Intel Core 2 Duo. If I upgrade to Dreamweaver CC, will there be any conflicts. Also, in the past I have downloaded a Dreamwever trial for CS5.5. Again, will I have any problems if I
-
Can I add/buy more storage for my ipod 4th generation
can I add/buy more storage for my ipod 4th generation--without deleting what I already have?