Oracle 11g RAC on Red Hat EL 4 x86_64 check failed for glibc-2.3.4-2.19

Hi , I had a Red Hat EL 4 linux with FULL installion, so all the packages are installed auto.
when I check the glibc with RPM, I got :
rpm -q --queryformat "%{NAME}-%{VERSION}.%{RELEASE}.%{ARCH}\n" glibc
glibc-2.3.4.2.41.i686
glibc-2.3.4.2.41.x86_64
It looks the 32 bit and 64 bit glibc are all installed.
but when I run cluvfy to check RAC installion , I got :
Check: Package existence for "glibc-2.3.4-2.19"
Node Name Status Comment
wcmrac2 missing failed
wcmrac1 missing failed
Result: Package existence check failed for "glibc-2.3.4-2.19". －－－－－32 bit check failed ？？
Check: Package existence for "glibc-2.3.4-2.19"
Node Name Status Comment
wcmrac2 glibc-2.3.4-2.41 passed
wcmrac1 glibc-2.3.4-2.41 passed
Result: Package existence check passed for "glibc-2.3.4-2.19".－－－－64 bit check passed ？？
why does this ?

Did you check the compatibility of Oracle Database 11g with RedHat 4 in the compatibility matrix or the installation docs?

Similar Messages

Can Oracle 11g RAC support 2 separate databases?

1. Can Oracle 11g RAC support 2 separate databases given that it asks for SCAN ip for cluster with a single Listener port number?
2. Will the Oracle 11.2 database connections work successfully if I setup a mandatory DNS server within the Oracle RAC servers?
I'm leading a team for a 11g project and appreciate responses.
Thanks
Satish.

No Real Application Cluster technology has ever supported more than one database.Quite untrue.
I know that both you and Tom Kyte take the stand that a cluster should have only 1 instance per node.
That doesn't mean that it is not possible to have more than one database in a cluster -- i.e more than one instance in a node.
That doesn't mean that it must always be so. Installing a separate cluster and additional EE + RAC licences for a separate database can be quite expensive. Of course, your reply is "consolidate". That is another debate that has been going on for years.
A discussion on multiple databases on RAC is also at
http://www.freelists.org/post/oracle-l/multiple-databases-in-a-single-RAC-cluster
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 12, 2010 11:15 AM

User equivalence check failed for user "oracle" while running cluvfy

Hi All,
I am getting User equivalence error as follows while executing cluvfy. I want to install CRS on this server.
oracle@node200$ ./runcluvfy.sh stage -pre crsinst -n node200,node201,node202
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "node200".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
node202,node201,node200
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
I have sucessfully configured ssh and able to do ssh from all the nodes without prompting for the password. Also oracle uid and gid on all the servers are same.
I also checked in .kshrc file and there is no tty entry in that file. and I have also setup /etc/hosts.equiv file on all the node.
I still get the user equivalance error. Can anybody help me in this ?
Regards,
Raj.

Hi,
thanks.
i need some more help because first time i am working on RAC,
i am also having User equivalence check failed for user "oracle"
i got two machines, one is IBM machine and one is DELL machine installed with solais 10 (AIX installation). both machines are not connected by private network now. and no shared external HDD available now. it will take one week time to set up the HW. the user equivalence check depends the above two factors?
now public network is available and node reachability test "passed"
could you please tell me what may be the reason for the user equivalence check in my case. details are given below
i have oracle user in both machine. user creation done through SMC. home directory is /export/home/oracle
the following are the details.
1) $ ssh pc000905 id -a oracle
Enter passphrase for key '/home/oracle/.ssh/id_rsa':
uid=100(oracle) gid=300(oinstall) groups=301(dba)
$ ssh pc026376 id -a oracle
Enter passphrase for key '/home/oracle/.ssh/id_rsa':
uid=100(oracle) gid=300(oinstall) groups=301(dba)
2) user nobody exists.
3) all files n .ssh directory have same permissions.
4) ssh and scp is working with out password(rsa and dsa keys generated).
5) oracle user is using bourne shell
6)soft link of /usr/bin/ssh and /usr/bin/scp are created to /export/home/oracle/bin
7)ForwardX11 is "yes" in sshd_config
8) created a config file in .ssh directory and ForwardX11 is "no" in that file
8) umask =022 in both nodes.
error displaying is
$/export/gome/cluvfy/runcluvfy.sh stage -pre crsinst -n pc026376,pc000905
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "PC026376".
Checking user equivalence...
User equivalence check failed for user "oracle".
Check failed on nodes:
pc026376,pc000905
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
$

Oracle 11g RAC on RHEL 4.0, error on 1 Node while running ./root.sh for CRS

Hi,
I am trying to install Oracle 11g RAC on RHEL 4.0 on Vmware and at the end of CRS installation when installer asks to run the two scripts (orainstRoot.sh and root.sh) on one node (on the node where runInstaller is started) throws following error
[root@LRAC1 crs]# ./root.sh
WARNING: directory '/xhdd/u01/crs/oracle/product/11.1.0' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle/product' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle' is not owned by root
WARNING: directory '/xhdd/u01/crs' is not owned by root
WARNING: directory '/xhdd/u01' is not owned by root
WARNING: directory '/xhdd' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up Network socket directories
/xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig: line 78: /xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig.bin: cannot execute binary file
/xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig: line 78: /xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig.bin: Success
Failed to upgrade Oracle Cluster Registry configuration
[root@LRAC1 crs]#
While on the second node the root.sh script does not give any errors, here the output
[root@LRAC2 crs]# ./root.sh
WARNING: directory '/xhdd/u01/crs/oracle/product/11.1.0' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle/product' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle' is not owned by root
WARNING: directory '/xhdd/u01/crs' is not owned by root
WARNING: directory '/xhdd/u01' is not owned by root
WARNING: directory '/xhdd' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/xhdd/u01/crs/oracle/product/11.1.0' is not owned by root. Changing owner to root
The directory '/xhdd/u01/crs/oracle/product' is not owned by root. Changing owner to root
The directory '/xhdd/u01/crs/oracle' is not owned by root. Changing owner to root
The directory '/xhdd/u01/crs' is not owned by root. Changing owner to root
The directory '/xhdd/u01' is not owned by root. Changing owner to root
The directory '/xhdd' is not owned by root. Changing owner to root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: lrac1 lrac1-priv lrac1
node 2: lrac2 lrac2-priv lrac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/sdd1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
lrac2
Cluster Synchronization Services is inactive on these nodes.
lrac1
Local node checking complete. Run root.sh on remaining nodes to start CRS daemons.
Any ideas to solve this issue.
Thanks in advance,
Sameer

I tried reinstalling again and it worked on Vmware Server.Some oracle products are certified on Oracle VM , but not RAC at the moment.
You can download Oracle VM from otn.oracle.com
Check ML Note:464754.1 for details about Certified Software on Oracle VM.
- Virag Sharma
http://virag.sharma.googlepages.com/

Oracle Installation errors on Red Hat AS 2.1

Hi, I've installed Oracle 9i on a Red Hat AS 2.1, but after the installation, when running the Database Configuration Assistant gave this error:
ORA-03113: end-of-file on communication channel
I found an installation guide on http://www.puschitz.com and it recommends you, when this error comes up , to remove the shared memory segments owned by oracle, and i did so, it just couldn't remove on , which chmod was 777..after that i retry the Database configuration assistan and it failed again but telling me a different error happened:
ORA-12571:TNS:Packet writer failure....
And i tried again and got the same error i got in the first place...and so on, and so on....
What can i do????
thanks...
Mario

Hi Paulo,
The problem is in the jre in your $ORACLE_BASE directory. The data in jre is corrupted, you can see the note 230693.1 "Netassist and Dbassist Hanging on RedHat Advanced Server (RHAS)" in metalink, and resolv your problem sure...
Good Luck

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment

We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB.
- Frest installation of oracle 11g using export/iimport dumps
- Migration
- Upgrade process
Any information regarding this will be appreciated.

Pl identify exact versions of "10g" and "11g", along with the exact OS versions.
Pl see the upgrade doc - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
HTH
Srini

Upgrade oracle 9i RAC to Oracle 11g RAC

Hi all,
db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.
thanks,
Visu.
Edited by: visu996253 on Apr 8, 2013 5:30 AM

db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
http://www.oracle.com/technetwork/products/upgrade/index-088044.html
785351.1 - Oracle 11g Upgrade Companion
http://download.oracle.com/docs/cd/E11882_01/server.112/e17222.pdf - Oracle® Database Upgrade Guide 11g Release 2 (11.2) E10819-02
Edited by: KR10822864 on Apr 8, 2013 5:52 AM
added more info.

Graphic manager Oracle 9i on linux Red Hat 8.0

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

Install oracle 9i on Linux Red Hat 8.0 Professional

Hi all,
i need to install oracle 9i on Linux red hat 8.0 professional. I dont know if this platform is certified by oracle and if there are any problem to install that.
Any information will be appreciate.
Thanks in advance
Regards
Giuseppe

HI,
According to Oracle "Unix Installation/OS: RDBMS Technical Forum", it is not supported.
I am pasting the final answer from one of the Oracle Analyst: (Hope it is OK)
From: Oracle, Amit Podder 19-Aug-03 15:14
Subject: Re : Does oracle support 9.2.0.2.0 on Redhat 7.X or 8.0
Hi,
AS of now Oracle Server - Enterprise Edition Version 9.2 is not certified on Red Hat 8.0.
The information on future plans is not published so we are unable to convey any info on the same.
Warm Regards
AMIT

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Which one is best option RAC 10g or oracle 11g RAC for certifiction point ?

hi ,
which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?
can any one detail difference between above 2 options?
Regards,
A.Anwar

A. Anwar wrote:
hi ,
which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?
can any one detail difference between above 2 options?The main difference is: Oracle Lifetime Support
Premier Support Ends
Oracle 10g R2 - Jul 2010
Oracle 11g R2 - Jan 2015
Extended Support Ends
Oracle 10g R2 - Jul 2013
Oracle 11g R2 - Jan 2018
http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
Oracle 10g R2 is getting unsupported.

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Install Oracle 11G, RAC with VMWare, APPS R12, and OBIEE on one server?

Dear Experts,
I'm looking to upgrade my skills, and want to learn more of:
Oracle 11G, RAC, VMWare, APPS R12, and OBIEE
My server has two quad cores (8 CPU altogether) and 16 gigs of RAM.
Years ago, I took a shots at installing RAC on multiple servers and firewire.
One thing I remember was that after I installed RAC, I was not able to use the database unless I enabled all the RAC processes on the server. So, I was not able to just boot the database and use it in the traditional single server manner.
Which I will also want to do.
1) Does this symptom/aspect/characteristic of RAC install still exist?
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?
Thanks a lot!

Hi,
1) Does this symptom/aspect/characteristic of RAC install still exist?No.
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?For learning/traning/demonstration purpose you can Install all these software on same machine.
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?There will not be any conflicts. I would suggest you to select vmware or virtual box in order to configure all these sw's.
I have done such a configuration on my laptop with i7 Quad processor, 16GB RAM and 640 GB HDD.
I have Installed 2 node RAC, 2 Node ERP and all are running smoothly without any issues.
Refer:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
thanks,
X A H E E R

Oracle 11g RAC on Red Hat EL 4 x86_64 check failed for glibc-2.3.4-2.19

Similar Messages

Maybe you are looking for