Oracle 11g upgrade prerequisite fails for all the values

Hi,
We have planned Oracle upgrade from 10.2.0.4 to 11.2.0.2. We have
followed the upgrade guide Database Upgrade Guide "Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". Our OS versionis HP-UX ia64 B.11.31. According to the upgrade guide we have set all the environment vairables. And started the Oracle 11.2.0.2 software installation prerequisite with the command " ./RUNINSTALLER -check " The result of the prerequisite check was giving the all the parameters are failed. But the parameters like Physical memory, orasid user also showing failed eventhough we are having 16 GB of physical memory & we logged on
with orasid it self and all the parameters are showing failed.
We have check the Oracle metalink note#169706.1, According to the note we have valid version of HP-UX 11.31 and some patches are already installed and some of them are not installed. But the prerequisite check showing all the patches are in failed state irrespective of some installed patches.
Regards,
Sreekanth

Hi there
For DB upgrades to 11g there are couple technical notes .
SAP Note No. 1431793
SAP Note No. 1431797
SAP Note No. 1431800
Hope them can be useful
BR
Venkat

Similar Messages

How to avoid report running for all the values in roll up of guided naviga

Hi
Thanks in Advance
I have 3 reports on three different pages of a dashboard. (Implemented guided navigation on one column of each report).When I click on value of guided navigation column it guides me to report 2 for that particular value (is prompted), same way for 3 report also till here it works fine.
However when I return from report 3 to report 2 and 2 to 1, the reports are running for all the values instead for the value which was passed by guided navigation of previous report earlier (Value on which I clicked to pass to the next report).
Edited by: 808623 on Nov 9, 2010 2:10 AM

Yes
Example : If i click on values 'X' in report 1
Report 2 shows results for 'X' only. And if i click on Value say 'Y' in 2 then report 3 shows for only 'Y'. But when i rollup from 3 to 2, Report 2 is showing for all values rather than showing 'x'.
I'm using Link or Image Dashboard Object > Destination>Request or Dashboard (path of previous report)
Edited by: 808623 on Nov 9, 2010 2:37 AM

Oracle 11g DB installation failed when checking Prerequisite.

Hi,
I am installing Oracle 11g DB in linux box using the shiphome "/net/stlinma7.us.oracle.com/vol/shiphomes_linux/rdbms/11.1.0/11.1.0.2/11102-BETA3". During installation process when i get "Product-Specific Prerequisite Checks" wizard screen, I am getting the following error message. and also the status of all the prerequisite is "Not executed".
OUI-15038: Unable to execute rule 'CertifiedVersions' from ruleset 'OSChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczOSChecks.checkCertifiedOSVersions' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking operating system package requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckPackages' from ruleset 'PackagesChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczPackagesChecks.checkPackages' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Install the required packages before continuing with the installation.
=======================================================================
Checking kernel parameters
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckParameters' from ruleset 'KernelChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczKernelChecks.checkParameters' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Perform operating system specific instructions to update the kernel parameters.
=======================================================================
Checking Recommended glibc version
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckGLIBC' from ruleset 'GLIBCChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczGlibcChecks.checkGlibc' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.
=======================================================================
Checking physical memory requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckPhysicalMemory' from ruleset 'SystemChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczSystemChecks.checkPhysicalMemory' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.
=======================================================================
Checking available swap space requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckSwapSpace' from ruleset 'SystemChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczSystemChecks.checkSwapSpace' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Make more swap space available to perform the install.
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Checking PATH environment variable...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Restart the installer after removing other ORACLE_HOME locations from PATH environment variable.
=======================================================================
Checking for sufficient diskspace in TEMP location...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking LD_LIBRARY_PATH environment variable...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Restart the installer after removing other ORACLE_HOME locations from LD_LIBRARY_PATH environment variable.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Unset the environment variable 'ORACLE_BASE' or make sure it is specified as a parent of the Oracle home directory.
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: You must completely remove the ASM instance by deleting the entry for it from the oratab file, or you must configure it properly by ensuring that the oratab file is updated to point to a valid Oracle Home where ASM is configured.
=======================================================================
Checking for Oracle Home incompatibilities ....
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckCompatibility' from ruleset 'CompatibilityChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczCompatibilityChecks.checkProductCompatibility' has thrown an unhandled exception [null]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Choose a new Oracle Home for installing this product.
=======================================================================

am installing Oracle 11g DB in linux box using the shiphome Where do you get this Oracle version ? If you're including in beta tests program, you maybe want to feedback your experience to 11g's Oracle team.
Nicolas.

Oracle 11g upgrade: How to update stale statistics for sys and sysman?

Hi,
I am in the process of testing Oracle 11g upgrade from Oracle 10.2.0.3. I have run utlu111i.sql on the 10g database.
The utility utlu111i.sql reports about the stale statistics for SYS and SYSMAN components.
I executed dbms_stats.gather_dictionary_stats; dbms_stats.gather_schema_stats('SYS'); and dbms_stats.gather_schema_stats('SYSMAN');
After that the utlu111i.sql still reports the stale statistics for sys and sysman. Does anyone know how to get rid off this warning successfully?
Thanks,
Sreekanth

Does anyone know how to get rid off this warning successfully?Just ignore the warnings. Check The Utlu111i.Sql Pre-Upgrade Script Reports Stale Sys Statistics - 803774.1 from Metalink.

I pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????

Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support

How to create a global property for all the reports in Oracle BIP

Hi,
I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
If(bproperty)
else
I do not want to have a property for each of the reports but this should be a global one for all the reports.
Please help. Your help is greatly appreciated :)
Thanks,
Karthik

Hi,
I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
If(bproperty)
else
I do not want to have a property for each of the reports but this should be a global one for all the reports.
Please help. Your help is greatly appreciated :)
Thanks,
Karthik

Why is the ios6 compatible for all the iphones but not all the phones got the all upgrades, for example the panorama camera??

why is the ios6 compatible for all the iphones but not all the phones got the all upgrades, for example the panorama camera?? this is another reason I am starting to dislike apple. An ipod is able to us an upgrade but not all the phones are? makes sense

"why is the ios6 compatible for all the iphones"
Ios 6 is not available for all iphones. Original Iphone and iphone 3 are not supported.
"but not all the phones got the all upgrades, "
This is common for most any device/computer. Not all iphone/computer/device models can handle all of the new features. Like any device, hardware is limited and cannot always support all new features and software.

Bpel deployment fails for all processes that have revision other than 1.0.

Using: Release *10.1.3.3.1*
Hello All,
Bpel deployment fails for all processes that have revision other than *1.0*.
We have been attempting to deploy several BPEL projects via ANT script to a target environment and are encountering failures to deploy for every project which isn’t a (revision 1.0). We are getting the following error whenever we try to deploy a process with a revision other than 1.0:
D:\TJ_AutoDeploy\BPEL_AutoDeploy_BETA\build.xml:65: BPEL archive doesnt exist in directory "{0}"
     at com.collaxa.cube.ant.taskdefs.DeployRemote.getJarFile(DeployRemote.java:254)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.deployProcess(DeployRemote.java:409)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.execute(DeployRemote.java:211)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
     at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
The structure of our automated deployment script is as follows:
First, a batch script calls (Jdeveloper_BPEL_Prompt.bat) in order to set all necessary environment variables i.e. ORACLE_HOME, BPEL_HOME, ANT_HOME, etc for ant.
Next, the script lists every .jar file within the directory to an .ini file called BPEL_List.ini. Furthermore, BPEL_DIR, ADMIN_USER and ADMIN_PSWD variables are set and initialized respectively to:
-     “.” – point to directory where script is running from because all the BPEL processes are located here
-     “oc4jadmin”
-     “*********” (whatever the password for out environment is)
We’ve developed a method to have the script prompt the user to select the target environment to deploy to. Once the user selects the appropriate environment, the script goes through the BPEL_List.ini files and a loop tells it that for every BPEL process listed:
DO ant
-Dprocess.name=%%b
-Drev= !Rev!
-Dpath=%BPEL_DIR%
-Ddomain=default
-Dadmin.user=%ADMIN_USER%
-Dadmin.password=%ADMIN_PWD%
-Dhttp.hostname=%HOST%
-Dhttp.port=%PORT%
-Dverbose=true
(What’s happening is that the variables in the batch file are being passed on to the ANT script where *%%b* is the process name, !rev! is revision #, and so on…)
The loop goes through each line in the BPEL_List.ini and tokenizes the BPEL process into 3 parts *(%%a, %%b, and %%c)* but we only extract 2 parts: *%%b* (process name) and *%%c* which becomes !Rev! (revision number).
Example:
Sample BPEL process:
bpel_ThisIsProcess1_1.0.jar
bpel_ThisIsProcess2_SOAv2.19.0.001B.jar
After tokenizing:
%%a     %%b     %%c
bpel     ThisIsProcess1     1.0.jar
bpel     ThisIsProcess2     SOAv2.19.0.001B.jar
*!Rev!* and not *%%c* because *%%c* will return whatever the revision number is + the “.jar” file extension as illustrated above. So to circumvent this, we parse *%%c* so that the last 4 characters are stripped. Such is done like this:
set RevN=%%c
set RevN=!RevN:~0,-4!
Hence, the usage of !Rev!.
Below is a screenshot post of the ANT build.xml that goes with our script:


<project name="bpel.deploy" default="deployProcess" basedir=".">
     
     <property name="process.dir" value="${basedir}" />
          
          
     <property environment="env"/>
     
          <condition property="bpel.home" value="${env.BPEL_HOME}">
               <available file="${env.BPEL_HOME}/utilities/ant-orabpel.xml" />
          </condition>
     
     
     
     
     <property name="oracle.home" value="${env.ORACLE_HOME}" />
     <property name="bpel.home" value="${oracle.home}/bpel" />
     
     <property file="${process.dir}/build.properties"/>
     
     <import file="${bpel.home}/utilities/ant-orabpel.xml" />
     
     <property file="${bpel.home}/utilities/ant-orabpel.properties" />
     
     <target name="deployProcess">
          <tstamp>
               <format property="timestamp" pattern="MM-dd-yyyy HH:mm:ss" />
          </tstamp>
          
          <record name="build_verbose.log" loglevel="verbose" append="true" />
          <record name="build_debug.log" loglevel="debug" append="true" />
          <echo></echo>
          <echo>####################################################################</echo>
          <echo>BPEL_AutoDeploy initiated @ ${timestamp}</echo>
          <echo>--------------------------------------------------------------------</echo>
          <echo>Deploying ${process.name} on ${http.hostname} port ${http.port} </echo>
          <echo>--------------------------------------------------------------------</echo>
          <deployProcess
               user="${admin.user}"
               password="${admin.password}"
               domain="${domain}"
               process="${process.name}"
               rev="${rev}"
               dir="${process.dir}/${path}"
               hostname="${http.hostname}"
               httpport="${http.port}"
               verbose="${verbose}" />
          <sleep seconds="30" />
          
     </target>
     
</project>
SUMMARY OF ISSUE AT HAND:
~ Every bpel process w/ 1.0 revision deploys with no problems
~ At first I would get an invalid character error most likely due to the “!” preceding “Rev”, but then I decided to set rev=”false” in the build.xml file. That didn’t work quite well. In another attempt, I decided to leave the –Drev= attribute within the batch script blank. That still led to 1.0s going through. My next thought was deploying something other than a 1.0, such as 1.2 or 2.0 and that’s when I realized that if it wasn’t a 1.0, it refused to go through.
QUESTIONS:
1.     IS THERE A WAY TO HAVE ANT LOOK INTO THE BPEL PROCESS AND PULL THE REVISION ID?
2.     WHAT ARE WE DOING WRONG? ARE WE MISSING ANYTHING?
3.     DID WE GO TOO FAR? MEANING, IS THERE A MUCH EASIER WAY WE OVERLOOKED/FORGOT/OR DON’T KNOW ABOUT THAT EXISTS?
Edited by: 793292 on Jul 28, 2011 12:38 PM

Only thing i can think of is instead of using a MAC ACL , u cud jus use the default class
Policy Map Test
class class-default
police 56000 8000 exceed-action drop
Class Map match-any class-default (id 0)
Match any
You would be saving a MAC-ACL ;-).

Change the Page Title for all the pages when viewing the Reports in Bi Publisher

Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.

As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home

My headphone jack no longer works. I just upgraded software and did all the iCloud install.

my headphone jack no longer works. I just upgraded software and did all the iCloud install. Any ideas?

It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
Alternatively ou could try Gutenprint (open source software):
http://gimp-print.sourceforge.net/MacOSX.php
I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

How to set up same timezone in BI Publisher for all the USERS?

Hi Experts,
My OBIEE version is 11.1.1.6.6 and any user can go into the My Account and then preferences and set the timezone.
But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
How do i setup common timezone in BI Publisher for all the users?
Thanks
Ashish

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

Recordcount for all the tables in my user

How I will get recordcount for all the tables in my user
with a single query??
Plz help.
Thanx in advance.

Not possible. As there can be any number of tables with any names, this requires dynamic SQL.
SQL given to the Oracle SQL Engine cannot be dynamic ito scope and references - it must be static. For example, one cannot do this:
SELECT count(*) FROM :table
For the SQL Engine to parse the SQL, determine if it is valid, determine the scope and security, determine an execution plan, it needs to know the actual object names. Objects like tables and columns and functions cannot be variable.
You will therefore need to write a user function (in PL/SQL) that dynamically creates a [SELECT COUNT] SQL for a table, execute that SQL and return the row count - and then use SQL to iterate through USER_TABLES for example and sum the results of this function.
Note that object tables are not listed in USER_TABLES - thus a more comprehensive list of all table objects in your schema can be found in USER_OBJECTS.

Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version

Hi,
Just curious to know when Oracle 11g grid control software for Oracle Enterprise Linux 5.0 version will be released. If already released, can you post the link?
Regards,
Manohar

aadragna wrote:
What is the best installlation document to follow for the latest EM Grid control ?The latest Grid Control is available for download at http://download.oracle.com (Scroll down to "Enterprise Management"). There is a README beside the download link. THAT README PROVIDES INSTALL INSTRUCTIONS.
In a nutshell, you install the lowest version (10.2.0.1 or 10.2.0.2, which ever is lower for your Grid Control platform), and then apply the 10.2.0.5 patch according to the readme. That should not normally take more than a day.
>
Also, can GRID discover PeopleSoft and Siebel application software ?
That can be found using the self-help portal: http://otn.oracle.com -> Products : Enterprise Management (left edge menu). In the 'Product Focus' area, you will notice 'Application Management' which will lead you to the appropriate data sheets and supporting information.

List of ports for all the WCI services

I'm trying to figure out why collab cant talk to the CNS, and I see in the log:
"Attempting to connect to teh notification server at host=blah (udp heartbeat port=28282 ..."
aarg. where is the configuraiton for this? can't find it anywhere.
Has anyone created a complete list of source - destination ports for all the new components?
I"m going to start writing them down here:
http://wiki.oracle.com/page/Webcenter+Interaction+Deployment

Hi Joel,
I have had a similar problem before but I am not sure if it is related to this, if you take a look inside the PTHOME/settings/configuration.xml file you will find some extra parameters which are not listed in the configuration manager for collab.
I suggest trying some of these settings to see if they coincide with your issue. The problem I had before was when a port that was not even listed in the config manager was blocked by my firewall.

"playback failed" for all podcasts using ios7

I just updated to IOS 7 and when I try to play a podcast that I am subscribed to, I get "playback failed" for all podcasts. The odd thing is that if I am connected via wifi, it seems to work fine. If wifi is not there, I get that error.
I cannot seem to find a setting anywhere that gets around this.
Help!

See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Oracle 11g upgrade prerequisite fails for all the values

Similar Messages

Maybe you are looking for