Oracle 11g via Form 6i

Hi,
Is it possible that Oracle Form 6i running under Oracle Database 11g? Since we don't want to upgrade the application to web version.
Thanks.

It's about the only version of Developer I managed to get working on Windows7 against my 11g database.

Similar Messages

Getting an error while cofiguring Oracle 11g Portal, Forms, reports

Hello All,
I installed the jrockit, weblogic server 10.3.5 and forms 11g 1.1.1.2 and ran the patchset for 11.1.1.3 and I was able to complete those without any problems.
After that I started configuring and creating the domain I encountered the error OPMN start process failed. I tried to resume but it again failed at OPMN restart process.
Ultimately the configuration of the forms failed only because of the above two failures.
I used the following path to configure (Start -> All Programs -> Oracle Classic 11g – Home1 -> Configure Classic Instance) which will invoke configuration wizard.
I think if I can fix the problem with OPMN, I can complete the configuration without problems.
Also I would like to know whether I can follow the steps mentioned in the link (http://www.bea-weblogic.com/how-to-delete-a-weblogic-server-wls-domain.html) to remove the domain
since configuration is already failed.
Could somebody help to resolve this issue.
Thanks in Advance
Ram

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Can not open database control in oracle 11g r2, listener issues

Hi,
I installed Oracle 11g r2 database on my laptop for testing. at beginning everything was fine and working. 2 days later i am unable to run oracle database control.. i get page not found!
I tried all the tricks and read almost 200 pages from oracle documentation, none of this was even close to help!
(by the way oracle documentation is a fail in my opinion, it really tend to complicate things so much and talk about things not related to what a developer want to read about, its even hard for professional programmer to keep up with this, I started to hate dealing with Oracle before even going deep!!)
I tried deleting database and creating new database i get the following warning:
- Enterprise manager configuration failed due to the following error:
listener is not up or database service is not registered with it. start listener and register database service.. etc.
Some how after few hours the control is working but the database is not there, and it shows that the listener is up, but database is down.
I tried creating a new database, but i get the error above (it seems its created but not linked to listener!!)
I guess what triggered this error is running xampp, i was also working in php project and ran xampp for test, since then oracle is corrupted!
any help would be appreciated (please don't send me links to oracle documentation because its useless and not straight to the point)
Regards

Hi
thank you for the reply
I assume i should do this through SQL plus?
anyway, now am getting new error: ORA-00020: maximum number of processes (150) exceeded
I get this error when trying to login to SQL plus, or create/configure database.
I tried deleting oracle 11g via universal installer i get message saying run the command c:\...dbhome_1\deinstall\deinstall
I don't understand Oracle totally collapsed in my laptop with no reason

Insert sound file into Oracel DB via Forms 6i

Dear All
Pls let me know how to insert sound files in to Oracle DB via Forms 6i.
Regards
Lakmal Marasinge

by the way - just for info : Sound-Items in Forms 6i can't be migrated to 10g. They are now obsolet.
So, the best way is to develop in 6i a solution based on java. Then you use it and communicate with it per java bean.
try it
Gerd

Error while configuring Oracle 11g Forms/Reports Product during istallation

Dears,
We are trying to configuring Oracle 11g Forms / Reports during istallation.
OS using: Win 7 -- 32 bit
RAM: 4 GB
We have installed the following modules successfully.
Following are the steps which we have followed:
1. Installation of Oracle jdk's --> Successful
2. Installation of Oracle web Logic Product --> Successful
3. Installation of Oracle Forms & reports Products ---> Successful
4. Configuration of Oracle 11g Forms / Reports Products --> Failed
After performing step 4, we are getting an error in the .out file
Can anyone please let us know what we have to do for making the step 4 successful.
Following is the content present in the "install2012-08-30_04-43-55PM.out" file..
Setting ORACLE_HOME to C:\Oracle\Middleware\frs11.1.2
Setting Doracle.config.mode to true
Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/classic.jar
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/template.jar
[email protected]lassicPage.ScreenRes
configFileName:C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM\ext\jlib\footprint.xml
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:15
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:27
PROXY_HOST=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:30
PROXY_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:33
PROXY_USER=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:39
COLLECTOR_SUPPORTHUB_URL=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:75
DOMAIN_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:90
STATICPORT INI FILE LOCATION=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:99
PROXY HOST NAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:102
PROXY PORT NO=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:105
PROXY BY PASS ADDRESS=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
In processErrorMsgStringOracle Instance
needWritableDirectory: false
needWritableDirectory: true
middlewareHomeLocation:C:\Oracle\Middleware
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
weblogicHome:C:\Oracle\Middleware\wlserver_10.3
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
In processErrorMsgStringInstance Name
In processErrorMsgStringunknown
In processErrorMsgStringOracle Home
In processErrorMsgStringDomain Name
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator Password
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringunknown
configuration Failed. Exiting configuration due to data validation failure.+
outputFile:C:\Program Files\Oracle\Inventory\logs\installProfile2012-08-30_04-43-55PM.log
in writeProfile method..
+[ENGINE] Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.+
Thanks in advance..
Suhail
Edited by: 956027 on 30-Aug-2012 23:13
Edited by: 956027 on 30-Aug-2012 23:14

Following is the last part of thecontent in .log file
This is the only part wher I have found the term "error"
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of domainName+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] domainName: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of wlHome+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] wlHome: C:\Oracle\Middleware\user_projects\domains+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] mwHome: C:\Oracle\Middleware+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] errID ====>>>>:INST-07277+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error:Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Cause:Specified Domain name is either not valid or the domain location already has a domain with the same name.+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Action:Enter a valid Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: weblogicQueries.isValidDomainHome+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: FAILED+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Inputs passed to the handler: [ FIELD DOMAIN NAME ( field ) = "Domain Name" ], [ DOMAIN_NAME ( val ) = "frsDomain" ], [ INVALID_TEXT_CHAR_MSG_STRING ( invalidCharMsgString ) = "unknown" ], [ Valid Character List for Farm Name ( regEx ) = "[\p{Alnum}_-]+" ]+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper] [SRC_METHOD: launch] Handler class: class oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch begin: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Entering method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of isCanBeBlank+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of val+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Value to be tested: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of field+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Text Field name: Domain Name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of regEx+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Regular Expression: [\p{Alnum}_-]++
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of minlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of maxlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of invalidCharMsgString+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Invalid Char Msg String: unknown+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for minimum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for maximum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for invalid characters+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: SUCCESS+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(ADMIN_PASSWORD) to:<SECURE>. Value obtained from:USER+

Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew

Hi All,
I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
As per my understanding of pre-requisites:
1)     I need to install Oracle SOA Suite 10g on my VM.
2)     I also need to install Oracle SOA Suite 11g on my VM.
3)     I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
4)     I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
5)     I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
If there is any alternative suggestion then please let me know.
Regards,

What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.

Can not configure Oracle 10g form on oracle 11g client

Hi
I need to install oracle 10g form in my system .
Here is my system
1. OS --XP
2. 32 Bit
4. Already oracle 11g release client installed ( I think that create the problem )
I tried to install oracle 10g form , it installed but can cont configure net manager for it , Always it point to 11g client and hence I could not configure .
Also I tried install Oracle Forms first then 11g client , But I got same issue .
I think if I created multiplr home one for 11g client and other for forms , it may work out .
Please help me
Debashis

While deploying the example 'VacationRequest' in the oracle complete guide for 11g, i got an exception like this
"12:08:15 PM] Deploying Application...
[12:11:16 PM] [Deployer:149191]Operation 'deploy' on application 'VacationRequestTaskFlow' is initializing on 'soa_server1'
[12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[12:11:24 PM] [Deployer:149193]Operation 'deploy' on application 'VacationRequestTaskFlow' has failed on 'soa_server1'
[12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: Failed to load webapp: 'VacationRequestTaskFlow.war'.
[12:11:24 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
[12:11:24 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
[12:11:24 PM] See server logs or server console for more details.
[12:11:24 PM] weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
[12:11:24 PM] #### Deployment incomplete. ####
[12:11:24 PM] Deployment Failed"
Can anyone help in this.

Calling Stored procedure in Oracle 11g from Oracle forms developer 6i

We have Oracle 11g (11.1.0.7.0 ) database (64 bit) installed on Windows Server 2008.
In this database, we have stored procedure ABC(arg1) which is accesing a table in another instance through DB LINK. If we EXECUTE this procedure from SQL/TOAD. It runs successfully and generates the desired output.
If we write the contents of the stored procedure in the PROGRAM UNIT / ANY TRIGGER in FORM 6i then also, It runs successfully and generates the desired output.
It is also mentioned, that if we try to use any table in the same instance (and not through DBLINK) then it works fine.
However, if we try to call this stored procedure (which is accesing a table in another instance through DB LINK) from ORACLE FORMS 6i in WHEN-BUTTON-PRESSED trigger then the FORM BUILDER gets hanged while compiling the form developed in FORMS 6i.
Please provide a solution to this problem.
THANKS IN ADVANCE.
Hemant Singh.
Asstt. Manager(IT)
Software development team.

Forms 6i was never meant to run against a 11g database, this was not tested and is also not supported.Well, that is not completely true. Developer 6i is supported against a 11g database, but only for Oracle Apps R11. That means that for most other customers (not Apps) Forms 6i will work against an 11g database. However, only Apps R11 is supported, and patches are only created specifically for Apps. We are also running Forms 6i against an 11g database without (well, minor) problems.
In this case, you need to find a solution. You can try to put the stored procedure in a package. The package body, with the reference to the remote table, will be hidden from Forms this way.

Question about Oracle Fusion Middleware 11g.- Installation FORMS

Hello everyboyd,
I am installing Forms version 11. First, I installed Oracle Weblogic Server version 10.3.6. After, I installed Forms 11g R2, but when the installation is in the step Create Dominion, the installation fails. I watch in the logs the follow error:
oracle.as.provisioning.util.ConfigException:
Error al iniciar el dominio.
Cause:
Se ha producido un timeout al iniciar el servidor de administración.
Action:
Consulte los logs para obtener más información.
*     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)*
*     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)*
*     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)*
*     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)*
*     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)*
*     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)*
*     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)*
*     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)*
*     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)*
*     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)*
*     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)*
*     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)*
*     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)*
*     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)*
*     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)*
*     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)*
*     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)*
*     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)*
*     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)*
*     at java.lang.Thread.run(Thread.java:662)*
In other log, the error is :
Executing Task: Creando Dominio
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
Creating Weblogic Domain.
Adding Template : C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
Adding Template : C:/Oracle/Middleware/Oracle_FRHome1/common/templates/applications/classic_template_11.1.2.jar
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JROCKI~1.0-1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbynet.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Could Somebody help I?
Thanks in advance
Carlota Viña Sirgo

Hi Carlota,
Now that the WebLogic and OHS environments are functional, there are some configurations that will be required to set up your Forms environment. Before deploying your own 11g forms, I would test to see if Oracle's test form (test.fmx) can run which is deployed by default in %ORACLE_HOME%\forms. What is supposed to happen is that when you run the URL you are using, Oracle Forms will:
1. Attempt to download the Java Runtime if not installed already. A Java Runtime (JRE) is required to run Oracle Forms 11gR2. The application will try to download the JRE specified in the formsweb.cfg file (sets up the Web environment for Forms) based off the jpi_codebase parameter (if using IE) or jpi_mimetype (if using other supported browsers). Make sure that your browser is able to download the JRE. Alternatively, you may also download a JRE from the Java website http://www.oracle.com/technetwork/java/javase/downloads/index.html. NOTE: Unless you are running Internet Explorer 64-bit (if you simply run Internet Explorer, this is 32-bit), I would download the 32-bit JRE.
2. Attempt to start the test.fmx form deployed in the FORMS_PATH variable. This variable is set in default.env, which is the standard environment variable deployment file for Forms (formsweb.cfg also references this file in the default section). If successful, you should receive a page saying "Installed successfully" as well as show you the version of Oracle Forms you are running (ex. 11.1.2.1.0).
Once those tests are work, if you need any assistance with deploying your own 11g forms, the Oracle Forms 11gR2 deployment guide provides a great source of information to help you get started: http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/toc.htm
Thanks,
Scott (PITSS)

Deploy 10g forms and reports in Oracle 11g

Hi, I'm working in 10g forms and reports development. However, in my company want to migrate to Oracle 11g.
My doubt is: May I deploy 10g forms and reports in Oracle 11g installation (Weblogis server + Oracle Fusion Middleware)?
Thanks.

I downloaded developer suite.does this developer suite includes 10g database also.becoz there are two disks for the developer suite whereas there was only one disk for oracle 10g datbase that i downloaded earlier and installed.if this developer suite includes database,reports and forms then do i need to uninstall the previous data base 10g that i installed.please help me regarding this.
thanking you all

Forms 10g - Oracle 11g DB - Date Format Error - Urgent

Hi All,
We are migrating forms 6i to forms 10g.Data Base is 9i to 11g Migration.
In 10g forms pre-form trigger ,i have statement
:head.yr_st_dt := to_date(sc.get_property('ps.yr_st_dt'),'MON DD YYYY HH:MI:SSPM');
In 6i ,it is working fine,the :head.yr_st_dt=22-SEP-09.
In 1og forms with 11g Database, I am getting the below error
frm-40735:PRE-FORM trigger raised unhandled exception ORA-01843
It seems invalid month.
In 9i ,the NLS_DATE_FORMAT is DD-MON-RR.In 11g also same.
Thanks in Advance,
Regards,
Shan

user642745: In the list of forum topics, the fourth topic down is this:
Before posting on this forum please read. Within that post there is a recommendation: "Also read the 10 Commandments on OTN forum posting." with this link: http://blogs.oracle.com/shay/2007/03/02
Please read and follow step 6, "Get a name".
You now have 101 posts to your "user642745" name. When you write, it is difficult to distinguish between your post and the original poster's since you both have a similar number as your names.
user648338: It is clear you do not understand how Oracle handles dates. Depending on the NLS_DATE_FORMAT and NLS_LANG for the session you are running, you will get different results when you display your sc.get_property('ps.yr_st_dt') output.
The fact that you are even trying to execute the command:
select to_date('01-MAY-09','MON DD YYYY HH:MI:SSPM') from dual;shows that you do not understand standard date processing.
Internally, Oracle stores ALL dates in a 7-byte format that includes both date AND time.
The fact that you are getting results like 01-MAY-09 just means that your session is running with NLS_DATE_FORMAT set to DD-MON-YY. It does NOT mean that the date is stored that way.
Your entire problem is caused by the fact that the system on which your old Oracle 9i -- Forms 6i environment has its NLS_DATE_FORMAT (and possibly NLS_LANG) set differently than on your Oracle 11g -- Forms 10g environment.
If you can set your new environment the same as the old, your trouble will go away. Here is how you determine what the values of those environment variables are. Run this in SQL Plus:
select * from nls_session_parameters
where parameter in('NLS_LANGUAGE','NLS_TERRITORY',
'NLS_DATE_FORMAT','NLS_DATE_LANGUAGE');Be aware, though, that it is possible for your Forms environment to change the settings only for the Forms sessions, so what you get from SQL Plus may not be the same.
Edited by: Steve Cosner on Sep 23, 2008 11:13 AM

Connecting to oracle 11g XE using forms 6i

Dear sir
i would like to connect to my database in oracle 11g xe using forms 6i; i have tried with normal procedure of defining a service name locally and connecting thru that, but it didn't work, forms 6i crashes while tring to connect to database. can anyone help me to do that?
thanks in advance
uday

911781 wrote:
yes tnsnames.ora i have configured accordingly
please find below the contents of respective tnsnames.ora
forms tnsnames.ora
CRMXE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xe)
database tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-E929IBU4N98.derivequity.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)Hello, Uday
copy bellow TNS to your forms TNS
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-E929IBU4N98.derivequity.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)It's just TNS Problem...
Hope it works...
If someone's response is helpful or correct, please mark it accordingly.

How to consume sap xi pi web services or sap RFC with oracle 11g forms.

Dear All
how to consume sap xi pi web services or sap RFC with oracle 11g forms.
or
how to config 11g forms with sap xi....
or how to call sap xi web services in 11g forms....
or can send sample code....
Regards
smfatmi
Edited by: smfatmi on Oct 17, 2011 2:16 AM
Edited by: smfatmi on Oct 17, 2011 2:17 AM

Dear All
how to consume sap xi pi web services or sap RFC with oracle 11g forms.
or
how to config 11g forms with sap xi....
or how to call sap xi web services in 11g forms....
or can send sample code....
Regards
smfatmi
Edited by: smfatmi on Oct 17, 2011 2:16 AM
Edited by: smfatmi on Oct 17, 2011 2:17 AM

How to run oracle 11g forms in windows xp

Hi friends,
I have installed weblogic 10.3.4, Oracle Fusion Middleware Forms 11g 11.1.4 version....
Configuration of domail also successful...
I use the following steps to run the form
1. WLS_FORMS
start -> programs - > Oracle Classic Instance - asinst_1_FR1 - > Forms Services -> Start Weblogic Server - WLS_FORMS
it is successfully running - showing the Running Mode
2. open the form bulider and connect to the database.
3. in form builder runtime path is - http://localhost:9001/forms/frmservlet
4. When i click on run button web page was invoked... but nothing is coming... blank page is displayed..
Please tell me how to run the form.... Am trying the test.fmx which is in D:\Oracle\Middleware\as_1\forms.
My system configuration in 2gb ram, windows Xp ser 2 , 2.4ghz processor...
Regards
Deepak Kumar H.R.

Do the following:
1. As Sarah mentioned, ensure that you have JRE 1.6.0_12 or newer installed.
2. In the Builder, ensure that you have entered both the Application Server URL and Web Browser Location values. Neither of these fields should be left blank. The browser location should be the complete path to the desired browser and include the exe name. For example if you were going to use IE it would look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
These settings are found in the Builder under EDIT > PREFERENCES > RUNTIME

Error while install oracle 11G forms and reports -creating Reports Server components error

Hello,
while install oracle 11G forms and report i face below issue on below step ( configuration step)
>> creating Reports Server components error
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.328+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.449+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2014-10-15T09:26:26.458+03:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: /u01/app/oracle/product/fmw11g/asinst_1/tmp
[2014-10-15T09:26:26.459+03:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 45] [ecid: 0000K^EnlatDg^WFLzfP8A1KFHkM00000^,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE

Ram,
You didn't read the response in your other thread.
WLS 10.3.5 isn't the right version of WLS to use with Forms 11.1.1.3
John

Oracle 11g via Form 6i

Similar Messages

Maybe you are looking for