Oracle 11g XE: Some services cannot be started

Hello,
I installed Oracle 11g XE on Windows 7 Home Premium.
In Windows Task Manager --> Services, There are the following services:
    OracleJobSchedulerXE (Stopped)
    OracleMTSRecoveryService (Stopped)
    OracleSeviceXE (Running)
    OracleXEClrAgent (Stopped)
    OracleXETNSListener (Running)
The status of three of them are stopped. I tried to start them from Windows Task Manager, I got message: The operation could not be completed, Access denied. Could someone tell me why they cannot started? What these services used for?
Many thanks.

Hi,
    OracleJobSchedulerXE (Stopped)
    OracleMTSRecoveryService (Stopped)
    OracleSeviceXE (Running)
    OracleXEClrAgent (Stopped)
    OracleXETNSListener (Running)
You should be able able to access the database if OracleSeviceXE is running. If you can't access the database check the alret_XE.log and post last few lines from the file.
Hope this old thread is helpful
https://community.oracle.com/thread/2496025
Regards
Yoonas

Similar Messages

PCMCIA Wlan card is not detected: Error 1058: service cannot be started

PLEASE HELP!
I am running WXP Pro for over 2 years and I have been connecting to the internet via a wireless pc card in my laptops PCMCIA slot with no problems. Suddenly last week it started to randomly disconnect and reconnect, and now it has gone off completely.
I bought a new WiFi card and still didn't work. I have checked the device manager and the PCMCIA cardbus driver is working fine as is every other device. The wireless card driver and some other network related drivers fail to start no matter what I try and how many times I try. I have tried another laptop and both my old card and the new one work fine.
All the device driver that I try to start have the error
"Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
The card driver is installed, just not starting, it's like the laptop cannot detect or see the card in the slot
Please help; I am having trouble finding anyone with the same problem after a week of searching the web.

Hi
This behavior can occur if the service is disabled or if the service is disabled for the hardware profile that you are currently using.
To enable the service do this:
1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
2. Double-click the service that did not start.
3. Click the Log On tab.
4. Verify that the service has not been disabled for the hardware profile that you are using. If it has, click Enable.
5. Click the General tab. Verify that the service has not been disabled in the Startup Type box. If it has, click Automatic to have it start when you start the computer.
This was described here in the MS knowledge base article
http://support.microsoft.com/kb/241584

Server 2012 R2 - Complete WSUS Installation Issue - The service cannot be started...

Hi all,
installed SCCM 2012 R2 CAS on a 2012 server. The SQL is off box on a server cluster. I've installed WSUS through the 'Add Roles and Features'. I configured it to have local storage for the content and a remote DB instance (called SQL1 on our cluster). All this
worked well and the install completed as expected. I checked the SQL cluster and the "SUSDB" database was created ok.
As a final step, i went to Tools in Server Manager and launched Windows Server Update Services. This brought up the 'Complete WSUS Installation' dialogue box. I entered the exact same DB info as i had done when completing the initial install of WSUS:
Yet when i hit 'run' the following message returns:
The relevant bit of logging is shown here:
2015-01-14 16:58:42 Starting service W3SVC
2015-01-14 16:58:42 Configuring IIS...
2015-01-14 16:58:42 Start: ConfigureWebsite
2015-01-14 16:58:42 System.Runtime.InteropServices.COMException (0x80070422): The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Since i'm pretty sure i need WSUS working correctly to use it for SCCM, can anyone suggest what my problem is here? I'd assume it's falling down because the 'ConfigureWebsite' job can't start but what service does that need to run?
Really stumpoed by this so any help would be much appreciated! Thanks

2015-01-14 16:58:42 Start: ConfigureWebsite
Did you install the Web Server role before installing the WSUS Server role? Is the Web Server role already installed? If so, is it installed and configured in a compatible manner with the WSUS role?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Service cannot be started. Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database. Ensure that the SQL Server is running and configured correctly

Hi All,
I am setting up SCVMM 2012 R2 in a production environment. Whenever I restart the SCVMM virtual machine the VMM service doesn't start automatically, I have to manually start it. I checked the VMM logs and in the event viewer i find the below error,
Service cannot be started. Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database. Ensure that the SQL Server is running and configured correctly. ---> System.Data.SqlClient.SqlException: Cannot open database "VirtualManagerDB"
requested by the login. The login failed. Login failed for user 'NXTRA\VMMSVC'. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&
dataReady) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.Sq...
I added the 'VMMSVC' account as db_owner and sysadmin and also NT_Authority\System with same permissions still the service doesn't start on the start up.
I googled a lot and I find the threads with the error containing "General failure" but not with the above. Can someone please help me to find out why this error is occuring.
Thanks,
Ravi

It's often only a problem of the service dependencies. SCVMM starts to fast, SQL server on the same machine in not initialized yet. Here are working service dependencies to ensure SQL server is initializes before SCVMM starts.
You can set the service dependencies directly in regedit (as always: be careful modifying the registry ...)
Here is the content of a reg file setting the dependency.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SCVMMService]
"DependOnService"=hex(7):53,00,51,00,4c,00,53,00,45,00,52,00,56,00,45,00,52,00,\
41,00,47,00,45,00,4e,00,54,00,00,00,53,00,51,00,4c,00,42,00,72,00,6f,00,77,\
00,73,00,65,00,72,00,00,00,53,00,51,00,4c,00,57,00,72,00,69,00,74,00,65,00,\
72,00,00,00,4d,00,53,00,53,00,51,00,4c,00,46,00,44,00,4c,00,61,00,75,00,6e,\
00,63,00,68,00,65,00,72,00,00,00,00,00

Oracle 11g native web services

Is there any formal explanation about how to configure and create Oracle 11g native web services and how to correctly secure these services? Since Oracle APEX now supports consumption of SOAP and REST web services, it makes sense to have more explanation about creating and securing web services. As many PL/SQL programmers know, it is always not an easy job to develop web services in jDeveloper to work with databases - with all those add-on technologies like jPublisher/Toplink to get tiny things work. It is not easy to find the "how-to" guide about creating and securing Oracle 11g native web services.
Thanks.
Andy

Thanks for the link Tim...it is very useful. I was told that, in APEX 4.2, it will become able to create RESTful web services through APEX - if you run APEX through APEX Listener - by using resource templates in APEX Listener. I will wait for more information about this feature to come out.
Thanks.
Andy

Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]"

Is there a solution to years old error message "Cannot create a system restore point [service cannot be started in Safe Mode (0x8007043c)]" I have been trying to create a restore point or image on an external hard drice, but I get the quoted message
and the system is NOT in safe mode. I have reviewed all the previous suggestions on this forum to no avail. Are there any new suggestions. My computer had Windows 7 installed and I have no source to re-load the OS. Ralph

Hi,
So actually you're not in safe mode (not black background, no "safe mode" on the left-bottom of the screen), right?
I think something is causing your PC thinking itself is in the safe mode, run sfc/scannow and chkdsk /f/r, check if the two tools can find any error.
Or perform a startup repair in recovery console, check the result
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
Yolanda Zhu
TechNet Community Support

Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

HI all.
New install of 2008R2 on HP DL-380 G6. I have created (several) VM's none of which will start. If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD).
It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD. The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD? I can attach the VHD
in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
Full error is:
'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
Any Ideas?

Hi ,
Did you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Nothing will work in my Vista 64bit! "The service cannot be started, either because..."

Hello,my windows Vista will not run anything, no antivirus', no system restore no administrative tools. I'm getting the message,"The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."... No system recovery at boot-up, I press F11 at boot up and the only service that won't start at boot up is system recovery. Any programs that I try to run that will have interact with windows system status keeps showing the same message, "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." Thanks in advance for anybody who has a solution to this.

On a Microsoft Web site I found the following information. It says it is for Win 7, but it might help you trouble shoot and maybe find out what is going on in your Windows Vista.
Good luck, GeorgeFN
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/the-service-cannot-be-started-ei...
GeorgeFN
I work on behalf of HP.

Oracle 11g 2, Windows Service OracleDBConsole doesn't start.

Hi!
I installed ORACLE 11.2 database (11.2.0.1.0) On Windows XP SP3.
Global database name: orcl
SID : orcl11g2
At the end of installation I got the error :
+01.12.2010 14:50:17 oracle.sysman.emcp.EMDBPostConfig invoke+
WARNING: Error starting Database Control.Please execute the following command(s).
+1) Set the environment variable ORACLE_UNQNAME to Database unique name+
+2) E:\app\u_kudinov\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole+
I type
set ORACLE_UNQNAME=orclin emctl.bat
end execute:
emctl.bat start dbconsoleI get that :
D:\>E:\app\u_kudinov\product\11.2.0\dbhome_1\bin\emctl.bat status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://2-3-67-7:1158/em/console/aboutApplication
EM Daemon is not running.+
with error message:
Specific error of service : 2
Q: How can I start the Windows Service OracleDBConsole ?
Thanks ...
Edited by: muma on 03.12.2010 2:19

Did you check this post: http://cn.forums.oracle.com/forums/thread.jspa?threadID=1108281
Eric

Oracle 11g Enterprise Manager Issue -- Cannot run DB & em dbconsole at 1ce

Hi All
I am coming for your help with a query uncommon. I have configured, my oracle 11g database, on windows 32 bit machine. Initially I had set sga_target to enable ASMM expecting Oracle to manage this part. However, upon subsequent restart, DB could never be started with continuous +"ORA-12853 cannot allocate xxxxK blocks to PX"+ stuff.
Reading some content over the net, I've unset SGA_TARGET and turned OFF ASMM and managed to start the db. Now, when I configured the EM on this machine and start it up I am able to open the URL https://xxx.xxx.xxx.xxx:1158/em, I am not able to login as authentication failure is returned where as the same set of userid and password work with out any complaints. Upon some look up, I realise EM dbconsole on the db server is consuming almost all of the available memory on the host leaving no space for Oracle or other processes on server. I cannot add any more memory for H/W restrictions. Having a page file of 4xRAM is not doing the trick. My attempts to grow oracle also do not help. I thought if I could control the memory utils of the EM AGENT and the corresponding Java process, it might help. I do not if that could be achieved.
Can we control, the REAL Memory Utilisation of the EM processes? Does any OS setting or Oracle setting help us achieve this? Please advice.
Regards!
Sarat

I am running windows 32 bit on Intel x86. Below is the extract of the system info. I hope this is useful.
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free\
Sarat

Oracle Process Manager(instance1) Service does not start

Hello Friends,
My Oracle Process Manger (instance1) windows service is not starting up.Due to which my presentation service is also down.
Kindly suggest any solution. I am using OBIEE 11.1.1.7

Thank you Reddy for your reply.
I am getting below error message in presentation server log, as well I cannot open rpd in ONLINE mode.
[2013-11-14T12:07:40.000+05:30] [OBIPS] [ERROR:31] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Could not create a system user connection to Oracle BI Server during start-up. Please check the error message and try again.
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp

Error 1053 the oracle(8.1.6) service is not starting on a fresh windows 2000 install

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion.

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion. This is what I did to start the oracle service..
1. Change the startup type to manual in the windows service panel
2. Restart the Windows 2000 PC
3. Start the Oracle service by clicking the start button in the services window.
4. It will hit the same error ie 1053..
5. Now kill the oracle process using windows Task Manager
6 Once again go back to services window and click the start button
7. It will show the status meter window with a close button..
8. After the status meter crosses halfway hit the close button..
9. Your oracle process is started now..

Oracle 11g takes way too long to start

I find that Oracle 11g 11.1 takes much longer to start than Oracle 10g or 9g. I am on HP UNIX 11i server, Have others observed similar issue. Are they any init.ora parameters to speed up startup.
Thanks.

alter system set fast_start_mttr_target=300 scope=bothThis has nothing to do with the posters startup time - at least if he stops his database not with "shutdown abort" or "startup force".
@user12021554: What exactly is "long"? Can you compare these numbers to 10g or even 9i?
Can you further check the server is not swapping and database parameters are equal?
Ronny Egner
My Blog: http://blog.ronnyegner-consulting.de

Oracle Application Testing Suite Service does not start

Hi,
I have installed Oracle Application Testing suite to test web services.I have also installed Jboss 4.0.2 AS. Now wen i m starting the Oracle Application Testing suite Service it gets stopped automatically.I could not open the Load Testing Page.Anyone please help.
Thanks in advance.

Hi,
did you get any error during installation?
try to update the jboss server by running 'Update Oracle Application Testing Suite Application Service'.
-Theo

11g DB Control service won't start on Win XP Pro

Hi all,
In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
Querying further, I find the following:
SERVICE_NAME: OracleDBConsoleorcl11p1
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : 2 (0x2)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
Cheers,
Jim Greetham

Jim,
Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
I have the same issue.
DB version: 11.1.0.6.0
OS: Win XP (latest patches and updates applied)
The database and other pieces are working just fine.
Thank you,
Taj

Oracle 11g XE: Some services cannot be started

Similar Messages

Maybe you are looking for