Oracle 11GR2 on windows 2008 Geo-Dispersed cluster
Hi all,
anyone can guide me about the installing oracle 11GR2 on windows 2008 Geo-dispersed cluster environment? Please guide and provide documentation if possible,
thanks
By "geo-dispersed", do you mean a cluster with servers is physically remote locations ? If so, the install process does not care about how far apart the servers are physically. Follow the standard install doc at http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/toc.htm
Srini
Similar Messages
-
Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed
Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
SujithHi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios -
Dataguard installation oracle 11gr2 on windows 2008 server
Hi,
I have oracle 11gr2 database on windows 2008 server. I have been given a primary and secondary server with the same setup.
Now i want to install dataguard. AFter installing i need to test it for disaster recovery.
Can anyone please suggest me a document for this? I searched in this forum but i couldnt get any.
Please help.An obvious place to look at is our Online Documentation about Data Guard Installation:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17022/toc.htm
See
3 Creating a Physical Standby Database
there.
There is not much special-Windows for Data Guard - of course you need to create Windows Services for both Databases etc. as described here:
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides
Kind regards
Uwe Hesse
http://uhesse.wordpress.com -
Oracle 11gR2 on Windows 2008 R2 - access denied error
I just installed 11gR2 on a Windows 2008 R2. When I tried to unsecure the dbconsole I noticed that an "Access is denied" error is returned, so I am not able to use the stop/start/unsecure command from emctl.
I am able to log in into the db and asm, but if I try to perform an imp/exp operation an create a log file from the operation I get an error EXP-00028: failed to open <log file name> for write.
I have already turned off the firewall, but the problem persists.
I know that Windows 2008 R2 has a lot of security enhancements that could cause issues, but I don't know what else I can turn off to deal with this situation.
BTW, I am logged with an account part of the Local Admins. and it belongs to the group ora_dba.
Thanks,
AlbertoThis may be a little late but did you run the command line using the Run As Administrator option? Windows 2008 will return that error when trying to do certain privileged operations under regular user rights.
-
Install Oracle 10g on windows 2008 Server 64bit
Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11gYou mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20 -
Can't install oracle 10g on windows 2008 R2
Please help me
I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
and oracle 11g i not license
Where can download file oracle install 10.2.0.4
thank youuser9357585 wrote:
same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered -
How to install Oracle 11gR2 on Windows 7
Hi friend;
There are many questions about *"how we can make instalaltion on win7"*. Thatswhy i made one video tutorial which is mention *"How to install Oracle 11gR2 on Windows 7*
Its avaliable at my blog:
*http://heliosguneserol.wordpress.com/*
Hope it helps who need to make this installation
Regard
HeliosThis question is not related to the Database Migration Assistant for Unicode (DMU). Please, post your question to one of the more appropriate forums, for example:
General Database Discussions
Database Installation
-- Sergiusz -
Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server
Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animeshactualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus -
Install Oracle 11 On Windows 2008 Cluster
Hi,
I am planning to go for the installation of Oracle 11g R2 on Microsoft Windows 2008 cluster.
Can any one suggest me how can i go with the installation.
I have done Oracle 11g R2 RAC implementation and Oracle 11g R2 on dedicated microsoft Servers.
Can anyone help me out to sort out this problem.It would be helpful for me.
Is there any documentation on this.
Regards
BobsHi all,
I have just got a link which might help me and others.
http://download.oracle.com/docs/cd/E16161_01/doc.342/e14976/toc.htm
Regards
Bobs -
Can't backup Oracle DB on Windows 2008 R2 via DB13
Hi All,
I'm having an issue that is driving me nuts.
First off, I'm using CA arcserve version 16. I checked the read me and i fall into the supported versions.
Windows Server 2008 R2 Service Pack 1 x64 with BR*TOOLS 7.2 for Oracle 11gr2
Windows Server 2008 R2 x64 with BR*TOOLS 7.2 for Oracle 11gr2
I have no issues at all with Windows 2003/2008 server, just 2008R2.
I have 10 2008R2 servers and all of them do not work.
I can use DB13 to run a local backup to disk. No Problem.
I can use Brtools to run a backup to disk. No Problem.
I can use Brtools to run a backup with a Util_file to my tape unit and CA Arcserve manager no issues.
I cannot use DB13 to backup with a Util_file.
The very same server using the uttil_file with brtools, will not work with db13.
Error is,
BR0280I BRBACKUP time stamp: 2011-11-18 14.01.43
BR0279E Return code from 'D:\usr\sap\S90\SYS\exe\uc\NTAMD64\backint.exe -u S90 -f backup -i D:\oracle\S90\sapbackup\.behgdxaa.lst -t file -p D:\oracle\S90\11202\database\initS90.utl -c': 22
BR0232E 0 of 21 files saved by backup utility
BR0280I BRBACKUP time stamp: 2011-11-18 14.01.43
BR0231E Backup utility call failed
ALl my 2003 and 2008's work fine.
ANyone have SAP running on 2008R2 and can use a util_file via DB13?
Edited by: Joshua Lacroix on Nov 18, 2011 8:45 PMSo i've been debugging..From DB13, it does pass it to windows and then windows tries to execute it.looks clean...I cant fingure this out...
Log Name: Application
Source: Oracle.s90
Date: 11/21/2011 4:19:02 PM
Event ID: 34
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: SAPSRV60.saps.local
Description:
Audit trail: LENGTH: '180' ACTION :[7] 'CONNECT' DATABASE USER:[1] '/' PRIVILEGE :[4] 'NONE' CLIENT USER:[19] 'NT AUTHORITY\SYSTEM' CLIENT TERMINAL:[8] 'SAPSRV60' STATUS:[4] '1031' DBID:[10] '3556861972' .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Oracle.s90" />
<EventID Qualifiers="16386">34</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-11-21T21:19:02.000000000Z" />
<EventRecordID>129844</EventRecordID>
<Channel>Application</Channel>
<Computer>SAPSRV60.saps.local</Computer>
<Security />
</System>
<EventData>
<Data>LENGTH: '180' ACTION :[7] 'CONNECT' DATABASE USER:[1] '/' PRIVILEGE :[4] 'NONE' CLIENT USER:[19] 'NT AUTHORITY\SYSTEM' CLIENT TERMINAL:[8] 'SAPSRV60' STATUS:[4] '1031' DBID:[10] '3556861972' </Data>
</EventData>
</Event> -
How to install a database on a MS Windows 2008 R2 failover cluster?
Hello,
I have to install a Oracle 11g R2 database onto a MS cluster (Windows Server 2008 R2 Failover Cluster with 2 nodes and shared storage). I installed the DBMS on both nodes. On the first node, I created a tablespace, the files are on the shared storage. I can connect to that database, up to here everything is fine.
But the problem is: How do I have to configure the DBMS on the second node to use the existing database files in the case when the second node gets the Cluster IP and the shared storage? The switchover is done, all database files (in the filesystem) can be seen on the second node.
The goal is to connect to the database from an external application, regardless which node is active.
I know the "Oracle Fail Safe Manager", it is already installed on both nodes.
A link to the related documentation would be helpful, I can't find anything.
Best regards,
C. Jost
Edited by: user13250186 on 07.06.2010 09:40Hello,
But the problem is: How do I have to configure the DBMS on the second node to use the existing database files in the case when the second node gets the >Cluster IP and the shared storage? The switchover is done, all database files (in the filesystem) can be seen on the second node.When you switch the database from one node to another one do you have any error ?
Can you connect to the database and check for the Tablespaces ?
Normally, with OFS you define Groups. In one Group you'll have the Database, the Disk, the IP address and the Listener. So when you move the Group from one node to another one, the disk will be recognized on the second node then, the database, listener, ... will start and, there's no reason to loose a datafile.
Please, find enclosed, an introduction to Oracle Fail Safe concept:
http://www.oracle.com/technology/tech/windows/failsafe/pdf/fisc32.pdf
Hope this help.
Best regards,
Jean-Valentin -
Instances in one node runningi in Oracle Clustster on Windows 2008 r2 VM
Helo,
I have created a Oracle 11g (11.2.0.2)cluster in windows 2008 r2 Environment in Vm
I have created the dbs also and every thing was working fine.
But after restarting the nodes instences in 1 node is not starting. 1 node is up so i can connect to DB.
when i do srvctl:
instance testdb1 is running on node xd-oradbb1-vm
instance testdb2 is not running on node xd-oradbb1-vm
srvct node apps - No Errors
crsctl - Both are online No Errors
When I try to start Below is the erro I am getting
The resource action "ora.testdb.db start"
encountered the following error:
ORA-00119: invalid specification for system parameter REMOTE_LISTENER
ORA-00132:
syntax error or unresolved network name 'RIE-ORADB-SCAN:1521'
Host file entries are :
#PUBLIC
10.53.52.41 XX-ORADBN1-VM.arg.internal XX-ORADBN1-VM
10.53.52.42 XX-ORADBN2-VM.arg.internal XX-ORADBN2-VM
#PRIVATE
10.1.1.41 XX-ORADBN1-VM-PRIV.arg.internal XX-ORADBN1-VM-PRIV
10.1.1.42 XX-ORADBN2-VM-PRIV.arg.internal XX-ORADBN2-VM-PRIV
#VIRTUAL
10.53.52.43 XX-ORADBN1-VM-VIP.arg.internal XX-ORADBN1-VM-VIP
10.53.52.44 XX-ORADBN2-VM-VIP.arg.internal XX-ORADBN2-VM-VIP
#SCAN ID
10.53.52.45 XX-ORADB-SCAN.arg.internal XX-ORADB-SCAN
10.53.52.46 XX-ORADB-SCAN.arg.internal XX-ORADB-SCAN
10.53.52.47 XX-ORADB-SCAN.arg.internal XX-ORADB-SCAN
Listener entry
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
Kindly help, I have created Oracle RAC Environment by refering the documents and and I am a beginner.
Thanks,
RajeshNode1 (In this node it is up)
D:\app\11.2.0\grid\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = D:\app\oraadmin
D:\app\oraadmin\product\11.2.0\dbhome_1\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES = (NTS)
remote_listener=RIE-ORADB-SCAN:1521
Node2 (not up)
D:\app\11.2.0\grid\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
ADR_BASE = D:\app\oraadmin
D:\app\oraadmin\product\11.2.0\dbhome_1\NETWORK\ADMIN
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
remote_listener=RIE-ORADB-SCAN:1521 -
Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2
Hi,
We are running Oracle 9.2.0.7 on Sun solaris (64 Bit) 5.10 and trying to install client on new Windows 2008 R2 (64 - bit) server. (Before this 2008 R2 we were using Windows 2003 32 bit and 9iR2 client was working great.) I can't install 9iR2 clinet and I tried installing 10gR1, 10gR2 and 11gR1 but none of them worked. It is only allowing me to install 11gR2. When I installed 11gR2 client I am getting some 'overflow exception on an arithmetic operation' error.
1.) Do I have any choice for client installation or only 11gR2?
2.) Any solution for overflow error?
Thanks,
-HMay I know the reason why ODBC driver is not include in option like Runtime?Oracle software utilizes SQL*Net (not ODBC) to connect to Oracle RDBMS.
ODBC is not required by Oracle client software to connect to Oracle RDBMS. -
Hi all,
I am planning to install Oracle R2 64 bin on windows 2008 64 bit. I have following question and need some guidance..
1) Will oracle 11i support windows cluster. (server A will be in NY and server B will be in TX)
2) should i install Oracle cluster as well on windows cluster.
3) I want to create DR or business continuity process so we ca fail over in any situation and fail back to original.
what are other option?? Please guide since i am new to this........
thanks
PareshHi;
Please follow below link:
http://download.oracle.com/docs/cd/E11882_01/install.112/e16783/toc.htm
Regard
Helios -
Can I install oracle 11gR2 on windows AD server?
I have a windows 2008 sever which has AD installed, can I install oracle 11gR2 on it?
If by AD you mean Active Directory, then it should not be an issue, as long as you meet minimum requirements - http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#i1011417
HTH
Srini
Maybe you are looking for
-
Linking report column to open a webpage
Hi All, Need a sincere help. I have a table TAB_ARC. In which i have columns ID PART_NUM LINK_TO_PART_NUM (Its a hyperlink) I have made report and form on same. I am inserting PART_NUM and LINK_TO_PART_NUM (which is a web link respective to the PART_
-
FLQAD: assignment for documents with local currency
Dear Gurus, I'm just curious with is it FLQAD assignment program uses transaction currency and since a company would normally view their cash flow statement in local currency. The FLQAD does not work for documents with zero transaction amount such as
-
I have deployed an 11g SOA-BPEL process that invokes a an external Web Service exposed by Oracle/PeopleSoft. When I test the deployment, I am getting the following error messages: *oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: javax.xml.
-
I dropped my ipad it dented the side of the case (the screen is OK) it dented right in the middle of the volume tap now volume tap doesn't work. Help...
-
Changing the default password when configuring.
Hi, can anyone tell me how to change the default password and username when you are first configuring your router? You know when you go to http://192.168.1.1/? I know the default password is admin and there is no user name but I would like to change