Oracle 11gR2 RAC deployment userid and group setup.

I am looking for some input here from all the RAC experts in this forum. Here is the situation.
We are in the process of setting grid infrastrucutre 11gR2 for RAC deployment. In order to follow the best practice we have grid user with primary group as oinstall which will hold grid installation. oraInventory will also be owned by grid:oinstall The DBMS software product will be owned by oracle user id with dba as the primary group and oinstall as the secondary group. We are aware that as a best practice, oracle id should also have oinstall as primary group but we are unable to do that. The reason is, oracle id is an LDAP id and is used enterprise wide and has dba as primary group and oinstall as secondary group/ We do not want to interrupt the existing operations by reversing it. I am looking for some insight if this is a supported configuration and want to know if u forsee any future problems or support issues. Here is our current userid setup
$ id
uid=5393(oracle) gid=273(dba) groups=101(asmdba),273(dba),2289(oinstall)
id
uid=14617(grid) gid=2289(oinstall) groups=101(asmdba),102(asmadmin),273(dba),2289(oinstall)

In your configuration since the oinstall and dba groups are reversed for the 'oracle' ID, you would need to reverse for the 'grid' ID as well. For example:
- Primary group for 'grid' is 'dba', secondary 'oinstall' and so on.
- 'dba' group owns all software and Oracle Inventory location
This is a bit confusing for anyone coming into the company since they expect the reverse.
I don't see why you couldn't swap the group names 'oinstall' and 'dba' within your LDAP setup. The actual group IDs would be the same, all you are doing is switching the names so everything actually stays the same since the group ID is what is used, not the name itself.
Hope this helps.

Similar Messages

Oracle 11gR2 RAC and DR setup

Environment:
Oracle 11gR2 RAC (2 node) with ASM
HP-UX B.11.31 U ia64
We have configured two ASM disk group for Data & FRA, and we configured RMAN backup into FRA location. Now our Database, Log file, Archive logs and RMAN backup files all are in ASM on primary site.
Our network team is using Recover Point to mirror all the disks into DR site; we have no setup from Oracle side. What is the possible configuration that we need to have in DR site from Oracle side in order to bring-up the database in-case of primary site failure (disaster).
I am new to Oracle RAC can some one give me a suggestion.
- Mano

What is the possible configuration that we need to have in DR site from Oracle side in order to bring-up the database in-case of primary site failure ORACLE DATAGUARD is what you need; not RAC

Oracle 11gR2 RAC VM and SCAN and DNS and /etc/hosts (two) setup questions

Hi,
I am looking forward to setting up two Oracle 11gR2 RAC instances
on my Oracle VM test machine.
I plan on using the Oracle 11gR2 RAC VM template.
I want the final Oracle 11gR2 RAC instances to have SCAN that uses DNS.
The DNS will be pre-installed in the JeOS.
My first simple question about the setup is the following.
In my DNS name file, for example,
/var/named/chroot/var/named/milkyway.univ.db
do I need to provide the racnode1 and racnode2 information,
for example,
# DNS name file (snippet)
myjeos IN A 192.168.1.150
racnode1 IN A 192.168.1.161
racnode1-vip IN A 192.168.1.163
racnode2 IN A 192.168.1.162
racnode2-vip IN A 192.168.1.164
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
Or, can I just provide only the rac-scan information
# DNS name file alternate (snippet)
myjeos IN A 192.168.1.150
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
What I am getting at is the following.
Within the install process, will racnode1, racnode1-vip, racnode2,
and racnode2-vip host names and their IP address be written
to the RAC instances /etc/hosts files? (So I should not bother
to put them in the DNS name file like '# DNS name file alternate (snippet)'?)
Or, should I put the racnode and racnode-vip host names and IP addresses
in the DNS name file like '# DNS name file (snippet)'?
The second question is the following.
Are the cluster name and the scan name allowed to be different?
Currently, I would plan them to be different,
for example, rac-cluster and rac-scan.
Or, are they required to be the same,
for example, rac-cluster and rac-cluster.
Thank you.
AIM

AIM wrote:
do I need to provide the racnode1 and racnode2 information,
Or, can I just provide only the rac-scan information You need to provide all of it in DNS, because other hosts in your network will need to be able to resolve all of the normal, VIP and SCAN addresses for your RAC nodes. We write this data out to /etc/hosts just to reduce the amount of round-trip DNS requests the cluster nodes make for themselves.
Are the cluster name and the scan name allowed to be different?They can be different.

Reinstalling Oracle 11gR2 RAC Grid Problem - ASM Disks Group

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
The directory for installing Grid in the 2 VMs is the same: /u01
In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
I have understood it's not the right way to delete /u01. The right way is to follow the tutorial
http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC
But I have deleted /u01 and need to fix one by one. I install Grid again and get the error message on step 5 of 9 as follows:
[INS - 30516] Please specify unique disk groups.
[INS-3050] Empty ASM disk group.
Cause - Installer has detected the disk group name provided already exists on the system.
Action - Specify different disk group.
In Wizard, the previous Disk Group name is "DATA" and its Candidate disks (5 ASMDISKs) are gone. I try to use a different name "DATA2", but no ASMDISKs come up under "Candidate disks". For "ALL Disks", all ASMDISKs cannot be selected.
I want to use the same ASM disk group "DATA" and don't want to create a new disk group.
My question is:
How to have the previous ASM disks and its group "DATA" come up under "Candidate Disks" so that can use it again ?
Thanks.

Hi, in case this helps anyone else. I got this INS-30516 error too was stumped for little while. I have 2 x 2-node RAC which are hitting same SAN. The first-built RAC has a DATA diskgroup. When went to build second RAC on new ASM disk new DIskgroup (but same diskgroup name DATA) got INS-30516 about diskgroup name already in use etc. Finally figured out all that was required was to restrict diskstring using button in installer to only retrieve the LUNS for this RAC (this was quick and dirty - all LUNS for both RAC being presented to both RAC). Once diskstring only searched for the LUNS required for this RAC only, e.g.
ORCL:DATA_P* (for DATA_PD and FRA_PD)
the error went away.
I also have DATA_DR and FRA_DR presenting to both RAC. Apparently it scans the header and if it finds a diskgroup name that is already in use based on the diskstring scan it will not allow reuse of the diskgroup name since it has no way of knowing that the other ASM disks are for a different RAC.
HTH

Oracle 11gR2 RAC in LDOM Network issue

Hi, Requesting your expert advise regarding this configuration.
We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
vnet inside the LDOM are not tagged:
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:f9:ec:7f
vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
ether 0:14:4f:fb:2b:8f
Here is the whole configuration:
root@gp-cpu-suh004 # ldm -V
Logical Domains Manager (v 2.2.0.0)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.4
System PROM:
Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
root@gp-cpu-suh004 # ldm ls
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 2.5% 48m
oidrac1 active -n---- 5000 32 16G 0.0% 27m
root@gp-cpu-suh004 # ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 3.1% 48m
SOFTSTATE
Solaris running
UUID
e73421fe-7003-e748-be7e-801fee5bfcc7
MAC
00:21:28:f1:95:26
HOSTID
0x85f19526
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
VCPU
MEMORY
RA PA SIZE
0x20000000 0x20000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
keyboard-layout=US-English
nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
VCONS
NAME SERVICE PORT
UART
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oidrac1 active -n---- 5000 32 16G 0.0% 27m
SOFTSTATE
Solaris running
UUID
0fcbbf21-14a2-eb21-f544-d4424212f3ef
MAC
00:14:4f:f9:1b:d4
HOSTID
0x84f91bd4
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
CID CPUSET
VCPU
VID PID CID UTIL STRAND
MEMORY
RA PA SIZE
0x20000000 0x420000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot?=true
boot-device=disk:a
keyboard-layout=US-English
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
DISK
NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
oid_data data_oid@primary-vds0 1 disk@1 primary
oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
VCONS
NAME SERVICE PORT
oidrac1 primary-vcc0@primary 5000
root@gp-cpu-suh004 # ldm ls-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
root@gp-cpu-suh004 # dladm show-link
vsw0 type: non-vlan mtu: 1500 device: vsw0
vsw1 type: non-vlan mtu: 1500 device: vsw1
vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
qlge0 type: non-vlan mtu: 1500 device: qlge0
qlge1 type: non-vlan mtu: 1500 device: qlge1
qlge2 type: non-vlan mtu: 1500 device: qlge2
qlge3 type: non-vlan mtu: 1500 device: qlge3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
root@gp-cpu-suh004 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
ether 0:21:28:f1:95:26
vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:fa:33:8b
root@gp-cpu-suh004 # netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 10.220.128.1 UG 1 7
10.220.128.0 10.220.128.9 U 1 5 vsw1501001
10.223.0.0 10.223.12.1 UG 1 2
10.223.12.0 10.223.12.14 U 1 1 igb0
224.0.0.0 10.220.128.9 U 1 0 vsw1501001
127.0.0.1 127.0.0.1 UH 8 261 lo0

Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
Here's the VNET config for the other LDOM in the RAC cluster:
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
Thanks for reviewing my configuration.

Oracle 11gR2 RAC with Sun clsuter 3.3 clsetup not showing ASMDiskGroup RS

Hello,
I am installing Oracle 11gR2 RAC on Solaris cluster 3.3 with hardware RAID and ASM
I was able to register rac-famework-rg and crs-framework-rg.
Oracle RAC is up and running (confirmed from crs_stat -t -v)
However, while creating option 5. Automatic Storage Management (ASM) on clsetup, I was getting ERROR: ASM is either not installed or the installation is invalid!
I have created the asm-inst-rg with resource asm-inst-rs and asm-dg-rg with resources asm-dg-fra, asm-dg-data and asm-dg-crs using CLI. Please find the complete clrg and clrs status output below:
root@rac1 # clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
rac-framework-rg rac1 No Online
rac2 No Online
asm-inst-rg rac1 No Online
rac2 No Online
asm-dg-rg rac1 No Online
rac2 No Online
root@rac1 # clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
crs_framework-rs rac1 Online Online
rac2 Online Online
rac-udlm-rs rac1 Online Online
rac2 Online Online
rac-framework-rs rac1 Online Online
rac2 Online Online
asm-inst-rs rac1 Online Online - +ASM1 is UP and ENABLED
rac2 Online Online - +ASM2 is UP and ENABLED
asm-dg-fra rac1 Online Online - Mounted: FRA
rac2 Online Online - Mounted: FRA
asm-dg-crs rac1 Online Online - Mounted: CRS
rac2 Online Online - Mounted: CRS
asm-dg-data rac1 Online Online - Mounted: DATA
rac2 Online Online - Mounted: DATA
Once I reach clsetup option 6: Resources for Oracle Real Application Clusters Database Instances, I was able to select cluster db name, oracle home, SID for both nodes, and it listed the asm-inst-rg and asm-inst-rs for selection of "Specify Oracle ASM Instance Resource".
The problem is the the next selection which is "Specify Oracle ASM Disk Group Resources" which does NOT list any asm-dg-rg or asm-dg-fra or anything, instead, it throws error "No existing disk-group resources available for selection. Run ASM subwizard create new resource(s) and come back to this panel for the selection."
Kindly guide me to create Resources for Oracle Real Application Clusters Database Instances either in CLI or clsetup
Thanks and Regards
Ushas Symon

Solaris Cluster 3.3 u1 solved the issue.
The problem right now I am facing is IPMP on the public interface.
When I remove the cable on the bge0, the ip on bge0 and the SCAN IP's are plumbed to bge1 which is in sc_ipmp0, but NOT the virtual IP!!! and the listeners on both nodes go offiline!!!
any inputs on the configuration will be highly appreciated..
Thanks and Regards
Ushas Symon

Oracle 11gR2 RAC on Linux 5

Hi,
I am trying to setup Oracle 11gR2 RAC on Linux 5.4 64-bit machine. I have used OCFS2 for creating shared disks. Encountered with the following error message while installing "Grid Infrastructure".
[INS-30014] Unable to check wether the location specified is on CFS
[INS-40103] The installer has detected that the software location specified is on an OCFS2 partition.
[IS-41312] One or more locations specified for Oracle cluster Regestry (OCR) cannot be used.
[INS-41514] One or more locations specified for placing voting disks cannot be used.
-- At the time of configuration i have created 2 share disks, 1) For Oracle software 2) For voting disk and OCR
Provided the same details at time of Clusterware installation.
Please hel me.
Thanks,

Actually for both Oracle software and OCR i have used OCFS2. bcz earlier in Oracle 11g1 RAC i did the same and able to do smooth installation Well, you can no more do that with 11gR2 and it's clearly mentioned in 11gR2 Error messages documentation that configuration of grid Infrastructure software for a cluster is not supported on OCFS2 partition. You'll need to specify a location that is not an OCFS2 partition.
Search for the error INS-40103 message at http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/giinstaller_errormessages.htm
Cheers.

Oracle 11gR2 RAC Backup & Recovery

I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC.
- Mano

ManoRangasamy wrote:
I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC. There won't be any different settings for RMAN for RAC except for where and how you would be configuring the Archive logs and place your backups. Both, ideally speaking, should be on the shared storage like ASM but there are other combinations also possible. Review the above given links for the same. That should provide a good starting point.
Aman....

Oracle 11gR2 - RAC to RAC replication via SAN

Hi,
Anyone there experience before on Oracle 11gr2 RAC to RAC via EMC SRDF setup? Please share some information and also provide links if there is any white paper/technical paper.
Thanks
Edited by: 858013 on May 11, 2011 12:10 AM

In SAN replication, the database instance at the remote site cannot be started up and running as the SAN cannot allow read-write access to the filesystems.
When the primary site goes down, you simply issue a STARTUP at the remote site --- provided that the SAN replication has guaranteed write ordering, else you will have a corrupted database. That is why it is very important to talk to your SAN storage vendors to get the replication setup correctly.
(If the replication is correctly done, the STARTUP will "see" that the database files are fuzzy and that the onlin redo log files are available and attempt an Instance Recovery -- as if the instance / server had crashed or suffered a shutdown abort).
Hemant K Chitale

Install Oracle 11gR2 RAC : Cannot remove directory bootstrap under /tmp

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a "
In order to fix the above error, I run "cluster verification utility" according to
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/cvu.htm I run the following command:
[ora11g@rac1 \]$ /home_grid/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Output:
/bin/rm: cannot remove directory '/tmp/bootstrap': Operation not permitted
./runcluvfy.sh:line 99:/tmp/bootstrap/ouibootstrap.log: permission denied
From the above output, we can see the directory bootstrap under /tmp causes the problem. The solution is to remove the directory bootstrap. I run the 2 commands:
[ora11g@rac1 tmp]$ rmdir bootstrap
Output: Operation not permitted
[ora11g@rac1 tmp]$ rm -rf bootstrap
Output: cannot remove bootstrap: Operation not permitted.
[ora11g@rac2 tmp]$ ls
Output: there is no 'bootstrap' directory.
My questions are:
First, does "cannot remove boostrap in rac1" cause that /tmp in rac2 could not be determine mount point ?
Second, can any folk help to remove the directory bootstrap under /tmp ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I have just run the 2 commands:
[root@rac2 \]# chown -R ora11g:dba /u01
[root@rac2 \]# chmod -R 775 /u01
ora11g is the user who installs the Grid and /u01 is the directory where Grid is installed and dba is the group.
I go back to Grid Installer Step 7 of 10 in rac1 and check again and see as below:
Free Space: Rac2 : /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available
Expected Value: n/a
Actual Value: n/a
The problem is not solved after run the above 2 commands in rac2.
In addition, I have run Cluster Verification Utility using the command:
[ora11g@rac1 grid]./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -r 11gR2 -orainv ora11g -verbose
Output: All of items for rac2 are passed. There is only one item for rac1 is failed as below:
Check default user file creation mask:
NodeName: rac1
Available: 0002
Required: 0022
Comment: failed
As we see above, the result of CVU command is not the same with Grid Installer step 7 of 10 (Installation Environment Verification):
CVU command doesn't find /tmp mount point problem for rac2 that Grid Installer does.
Grid Installer step 7 of 10 doesn't find user file creation mask problem for rac1 that CVU command does.
I have tried to find out whether creation mask failed for rac1 causes /tmp problem for rac2. I have changed the line "umask 002" to "umask 0022" for rac1 in each of the 3 files below and run CVU command each time for each file:
rac1:
/etc/bashrc
/etc/profile
/etc/csh.cshrc
But chang the line "umask 002" to "umask 0022" for rac1 in each of the above 3 files does not solve the problem.
My questions are:
First, why is the result of CVU command not the same with that of Grid Installer step 7 of 10 ?
Second, why change the line "umask 002" to "umask 0022" in 3 files can't solve creation mask problem for rac1 ?
Third, how to solve /tmp problem for rac2 and creation mask problem for rac1 ?
Thanks.

SCAN Name issue in Oracle 11gR2 RAC Installation

Hi,
I am trying to install Oracle 11gR2 RAC on VM ware and I got the INS-40922 (Invalid SCAN name). Do I need to create the SCAN name prior to the installation?
I have public,private, and VIP's. I am not sure how I create this SCAN Name. Please share your thoughts
Thanks

During installation of grid infrastructure SCAN will be automatically created. If you are using DNS then put the scan name and scan ip addresses entries in DNS . If you are not using dns/gns then put scanname and scan ipadress hosts file on each node in the cluster. Before installation, you should not be able to ping scan ipadresses.

Oracle 11gR2 RAC - R language integration

Hello,
We want statistical language R integration with oracle database. Does this come with default installation of oracle database Oracle 11gR2 RAC ?
OR it requires EXADATA - BIGDATA (oracle appliance)?
Kindly let us know steps for installation /enabling R language ? Basically we are looking for 3 options (transparency, In-database, embedded). Optimal option choice is done automatically depending on R language script (I think R script needs to have different calls?)
Thanks

Please do NOT duplicate your questions here.
R is a language. Oracle is a database. You store data in a database. You write programs [using a language such as R] to extract and manipulate data from the database.

Oracle 11gR2 RAC - timeseries

Hello,
We would like to know if Oracle 11gR2 RAC supports timeseries data storage and time-series functions. Timeseries storage is quite different - in terms of storage optimization - block storages, compressions, columnar databases and others. Time-series functions like regressions, data-mining. Does these options come by default or we require statistical language R integration?
Thanks

937054 wrote:
Hello,
1. Usally time-series data goes in multiple millions, so timeseries databases like FAME,KDB,SYBASE-IQ are used. Does oracle11gr2 provide storage optmizations, compressions, columnar database like FAME,KDB,SYBASE-IQ?
The only methods of optimization are partitioning of the data by some date or if data set is narrow (few columns)l enough, partitioned IOT.
2. http://www.oracle.com/us/corporate/press/1515738
Link is about R statistical language and data mining integration with Oracle database 11gR2. Does this come default during installation or with BigData - EXADATA? OR this is a seperate license?I am not sure about the licensing, you will need to ask your sales person, but it looks like it might be apart of ODM (oracle data mining - a licensed product)
Take a read through this case study.
http://www.oracle.com/technetwork/database/options/advanced-analytics/odm/odmtelcowhitepaper-326595.pdf?ssSourceSiteId=ocomen
>
Thanks

Oracle 11gR2 RAC: Running the script root.sh problem

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.

you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC)

Oracle 11gR2 RAC : How to resume runInstaller to continue to install Grid ?

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
After finish running the script root.sh in VM rac1 and rac2, the Computer is shut down automaticall because I don't touch the keyboad for a long time. When I resume the Computer, runInstaller Wizard is gone. My question is:
How to resume runInstaller to continue to install Grid ?
Thanks.

Hi!
You can't resume runInstaller.
You must Clear you envinronment, and try again.

Oracle 11gR2 RAC deployment userid and group setup.

Similar Messages

Maybe you are looking for