Oracle 11gr2 RAC hardware
Hello experts,
how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
RAM 6GB
i7 processer, 500GB Hard Disk
Thanks in Advance.
Hi,
Also two more articles on the same portal with regards to 11gR2 RAC installations
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
Regards,
Similar Messages
-
Oracle 11gR2 RAC with Sun clsuter 3.3 clsetup not showing ASMDiskGroup RS
Hello,
I am installing Oracle 11gR2 RAC on Solaris cluster 3.3 with hardware RAID and ASM
I was able to register rac-famework-rg and crs-framework-rg.
Oracle RAC is up and running (confirmed from crs_stat -t -v)
However, while creating option 5. Automatic Storage Management (ASM) on clsetup, I was getting ERROR: ASM is either not installed or the installation is invalid!
I have created the asm-inst-rg with resource asm-inst-rs and asm-dg-rg with resources asm-dg-fra, asm-dg-data and asm-dg-crs using CLI. Please find the complete clrg and clrs status output below:
root@rac1 # clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
rac-framework-rg rac1 No Online
rac2 No Online
asm-inst-rg rac1 No Online
rac2 No Online
asm-dg-rg rac1 No Online
rac2 No Online
root@rac1 # clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
crs_framework-rs rac1 Online Online
rac2 Online Online
rac-udlm-rs rac1 Online Online
rac2 Online Online
rac-framework-rs rac1 Online Online
rac2 Online Online
asm-inst-rs rac1 Online Online - +ASM1 is UP and ENABLED
rac2 Online Online - +ASM2 is UP and ENABLED
asm-dg-fra rac1 Online Online - Mounted: FRA
rac2 Online Online - Mounted: FRA
asm-dg-crs rac1 Online Online - Mounted: CRS
rac2 Online Online - Mounted: CRS
asm-dg-data rac1 Online Online - Mounted: DATA
rac2 Online Online - Mounted: DATA
Once I reach clsetup option 6: Resources for Oracle Real Application Clusters Database Instances, I was able to select cluster db name, oracle home, SID for both nodes, and it listed the asm-inst-rg and asm-inst-rs for selection of "Specify Oracle ASM Instance Resource".
The problem is the the next selection which is "Specify Oracle ASM Disk Group Resources" which does NOT list any asm-dg-rg or asm-dg-fra or anything, instead, it throws error "No existing disk-group resources available for selection. Run ASM subwizard create new resource(s) and come back to this panel for the selection."
Kindly guide me to create Resources for Oracle Real Application Clusters Database Instances either in CLI or clsetup
Thanks and Regards
Ushas SymonSolaris Cluster 3.3 u1 solved the issue.
The problem right now I am facing is IPMP on the public interface.
When I remove the cable on the bge0, the ip on bge0 and the SCAN IP's are plumbed to bge1 which is in sc_ipmp0, but NOT the virtual IP!!! and the listeners on both nodes go offiline!!!
any inputs on the configuration will be highly appreciated..
Thanks and Regards
Ushas Symon -
Oracle 11gR2 RAC in LDOM Network issue
Hi, Requesting your expert advise regarding this configuration.
We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
vnet inside the LDOM are not tagged:
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:f9:ec:7f
vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
ether 0:14:4f:fb:2b:8f
Here is the whole configuration:
root@gp-cpu-suh004 # ldm -V
Logical Domains Manager (v 2.2.0.0)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.4
System PROM:
Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
root@gp-cpu-suh004 # ldm ls
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 2.5% 48m
oidrac1 active -n---- 5000 32 16G 0.0% 27m
root@gp-cpu-suh004 # ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 3.1% 48m
SOFTSTATE
Solaris running
UUID
e73421fe-7003-e748-be7e-801fee5bfcc7
MAC
00:21:28:f1:95:26
HOSTID
0x85f19526
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
VCPU
MEMORY
RA PA SIZE
0x20000000 0x20000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
keyboard-layout=US-English
nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
VCONS
NAME SERVICE PORT
UART
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oidrac1 active -n---- 5000 32 16G 0.0% 27m
SOFTSTATE
Solaris running
UUID
0fcbbf21-14a2-eb21-f544-d4424212f3ef
MAC
00:14:4f:f9:1b:d4
HOSTID
0x84f91bd4
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
CID CPUSET
VCPU
VID PID CID UTIL STRAND
MEMORY
RA PA SIZE
0x20000000 0x420000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot?=true
boot-device=disk:a
keyboard-layout=US-English
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
DISK
NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
oid_data data_oid@primary-vds0 1 disk@1 primary
oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
VCONS
NAME SERVICE PORT
oidrac1 primary-vcc0@primary 5000
root@gp-cpu-suh004 # ldm ls-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
root@gp-cpu-suh004 # dladm show-link
vsw0 type: non-vlan mtu: 1500 device: vsw0
vsw1 type: non-vlan mtu: 1500 device: vsw1
vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
qlge0 type: non-vlan mtu: 1500 device: qlge0
qlge1 type: non-vlan mtu: 1500 device: qlge1
qlge2 type: non-vlan mtu: 1500 device: qlge2
qlge3 type: non-vlan mtu: 1500 device: qlge3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
root@gp-cpu-suh004 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
ether 0:21:28:f1:95:26
vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:fa:33:8b
root@gp-cpu-suh004 # netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 10.220.128.1 UG 1 7
10.220.128.0 10.220.128.9 U 1 5 vsw1501001
10.223.0.0 10.223.12.1 UG 1 2
10.223.12.0 10.223.12.14 U 1 1 igb0
224.0.0.0 10.220.128.9 U 1 0 vsw1501001
127.0.0.1 127.0.0.1 UH 8 261 lo0Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
Here's the VNET config for the other LDOM in the RAC cluster:
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
Thanks for reviewing my configuration. -
SCAN Name issue in Oracle 11gR2 RAC Installation
Hi,
I am trying to install Oracle 11gR2 RAC on VM ware and I got the INS-40922 (Invalid SCAN name). Do I need to create the SCAN name prior to the installation?
I have public,private, and VIP's. I am not sure how I create this SCAN Name. Please share your thoughts
ThanksDuring installation of grid infrastructure SCAN will be automatically created. If you are using DNS then put the scan name and scan ip addresses entries in DNS . If you are not using dns/gns then put scanname and scan ipadress hosts file on each node in the cluster. Before installation, you should not be able to ping scan ipadresses.
-
Oracle 11gR2 RAC - R language integration
Hello,
We want statistical language R integration with oracle database. Does this come with default installation of oracle database Oracle 11gR2 RAC ?
OR it requires EXADATA - BIGDATA (oracle appliance)?
Kindly let us know steps for installation /enabling R language ? Basically we are looking for 3 options (transparency, In-database, embedded). Optimal option choice is done automatically depending on R language script (I think R script needs to have different calls?)
ThanksPlease do NOT duplicate your questions here.
R is a language. Oracle is a database. You store data in a database. You write programs [using a language such as R] to extract and manipulate data from the database. -
Oracle 11gR2 RAC VM and SCAN and DNS and /etc/hosts (two) setup questions
Hi,
I am looking forward to setting up two Oracle 11gR2 RAC instances
on my Oracle VM test machine.
I plan on using the Oracle 11gR2 RAC VM template.
I want the final Oracle 11gR2 RAC instances to have SCAN that uses DNS.
The DNS will be pre-installed in the JeOS.
My first simple question about the setup is the following.
In my DNS name file, for example,
/var/named/chroot/var/named/milkyway.univ.db
do I need to provide the racnode1 and racnode2 information,
for example,
# DNS name file (snippet)
myjeos IN A 192.168.1.150
racnode1 IN A 192.168.1.161
racnode1-vip IN A 192.168.1.163
racnode2 IN A 192.168.1.162
racnode2-vip IN A 192.168.1.164
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
Or, can I just provide only the rac-scan information
# DNS name file alternate (snippet)
myjeos IN A 192.168.1.150
rac-scan IN A 192.168.1.131
rac-scan IN A 192.168.1.132
rac-scan IN A 192.168.1.133
What I am getting at is the following.
Within the install process, will racnode1, racnode1-vip, racnode2,
and racnode2-vip host names and their IP address be written
to the RAC instances /etc/hosts files? (So I should not bother
to put them in the DNS name file like '# DNS name file alternate (snippet)'?)
Or, should I put the racnode and racnode-vip host names and IP addresses
in the DNS name file like '# DNS name file (snippet)'?
The second question is the following.
Are the cluster name and the scan name allowed to be different?
Currently, I would plan them to be different,
for example, rac-cluster and rac-scan.
Or, are they required to be the same,
for example, rac-cluster and rac-cluster.
Thank you.
AIMAIM wrote:
do I need to provide the racnode1 and racnode2 information,
Or, can I just provide only the rac-scan information You need to provide all of it in DNS, because other hosts in your network will need to be able to resolve all of the normal, VIP and SCAN addresses for your RAC nodes. We write this data out to /etc/hosts just to reduce the amount of round-trip DNS requests the cluster nodes make for themselves.
Are the cluster name and the scan name allowed to be different?They can be different. -
Hello,
We would like to know if Oracle 11gR2 RAC supports timeseries data storage and time-series functions. Timeseries storage is quite different - in terms of storage optimization - block storages, compressions, columnar databases and others. Time-series functions like regressions, data-mining. Does these options come by default or we require statistical language R integration?
Thanks937054 wrote:
Hello,
1. Usally time-series data goes in multiple millions, so timeseries databases like FAME,KDB,SYBASE-IQ are used. Does oracle11gr2 provide storage optmizations, compressions, columnar database like FAME,KDB,SYBASE-IQ?
The only methods of optimization are partitioning of the data by some date or if data set is narrow (few columns)l enough, partitioned IOT.
2. http://www.oracle.com/us/corporate/press/1515738
Link is about R statistical language and data mining integration with Oracle database 11gR2. Does this come default during installation or with BigData - EXADATA? OR this is a seperate license?I am not sure about the licensing, you will need to ask your sales person, but it looks like it might be apart of ODM (oracle data mining - a licensed product)
Take a read through this case study.
http://www.oracle.com/technetwork/database/options/advanced-analytics/odm/odmtelcowhitepaper-326595.pdf?ssSourceSiteId=ocomen
>
Thanks -
Oracle 11gR2 RAC: Running the script root.sh problem
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC) -
Oracle 11gR2 RAC : How to resume runInstaller to continue to install Grid ?
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
After finish running the script root.sh in VM rac1 and rac2, the Computer is shut down automaticall because I don't touch the keyboad for a long time. When I resume the Computer, runInstaller Wizard is gone. My question is:
How to resume runInstaller to continue to install Grid ?
Thanks.Hi!
You can't resume runInstaller.
You must Clear you envinronment, and try again. -
Oracle 11gR2 RAC clusterware not picking up ASM diskgroups
Hello: I had to deinstall a failed oracle 11gR2 rac cuslterware. But, not the asm disks are not in the OUI pick list. How can I resolve that?
The storage is on SAN partitions.Probably the install already put something on the disks.
Clean them with dd if=/dev/zero of=<your asm disks> bs=1M count=10
Regards
Sebastian -
Oracle 11gR2 RAC Root.sh Failed On The Second Node
Hello,
When i installing Oracle 11gR2 RAC on AIX 7.1 , root.sh succeeds on first node but fails on the second node:
I get error "Root.sh Failed On The Second Node With Error ORA-15018 ORA-15031 ORA-15025 ORA-27041 [ID 1459711.1]" within Oracle installation.
Applies to:
Oracle Server - 11gR2 RAC
EMC VNX 500
IBM AIX on POWER Systems (64-bit)
in /dev/rhdiskpower0 does not show in kfod output on second node. It is an EMC multipath disk device.
But the disk can be found with AIX command.
any help!!
Thanksthe soluation that uninstall "EMC solutitons enabler" but in the machine i just find "EMC migration enabler" and conn't remove without remove EMC Powerpath.
-
Oracle 11gR2 RAC Vs Linux Version
Hi Guys
Please let me know whether i can start the Oracle 11gR2 RAC Grid installation in RHEL 6 or the higher version. Will i able to download the ASM libs for RHEL 6 n greater version. Thanks.Hi,
You can install 11.2.0.3 on RHEL 6 or OEL 6. Please note that asmlib rpms are no more available on RHEL 6 and hence will advise to go for OEL 6. For RHEL, you have to use udev rules.
Regards,
Sharma -
Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
There are 3 ways to solve this issue:
1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
2) In the file /etc/profile, add line "umask 0022" at the end of the file.
3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.Folks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks. -
Environment:
Oracle 11gR2 RAC (2 node) with ASM
HP-UX B.11.31 U ia64
We have configured two ASM disk group for Data & FRA, and we configured RMAN backup into FRA location. Now our Database, Log file, Archive logs and RMAN backup files all are in ASM on primary site.
Our network team is using Recover Point to mirror all the disks into DR site; we have no setup from Oracle side. What is the possible configuration that we need to have in DR site from Oracle side in order to bring-up the database in-case of primary site failure (disaster).
I am new to Oracle RAC can some one give me a suggestion.
- ManoWhat is the possible configuration that we need to have in DR site from Oracle side in order to bring-up the database in-case of primary site failure ORACLE DATAGUARD is what you need; not RAC
-
The best option to create a shared storage for Oracle 11gR2 RAC in OEL 5?
Hello,
Could you please tell me the best option to create a shared storage for Oracle 11gR2 RAC in Oracel Enterprise Linux 5? in production environment? And could you help to create shared storage? Because there is no additional step in Oracle installation guide. There are steps for only asm disk creation.
Thank you.Here are names of partitions and permissions. Partitions which have 146 GB, 438 GB, 438 GB of capacity are my storage. Two of three disks which are 438 GB were configured as RAID 5 and remaining disk was configured as RAID 0. My storage is Dell MD 3000i and connected to nodes through ethernet.
Node 1
[root@rac1 home]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:39 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:40 /dev/sda1
brw-r----- 1 root disk 8, 16 Aug 8 17:39 /dev/sdb
brw-r----- 1 root disk 8, 17 Aug 8 17:39 /dev/sdb1
brw-r----- 1 root disk 8, 32 Aug 8 17:40 /dev/sdc
brw-r----- 1 root disk 8, 48 Aug 8 17:41 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 18:26 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:43 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 18:34 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:43 /dev/sdf1
brw-r----- 1 root disk 8, 96 Aug 8 18:34 /dev/sdg
brw-r----- 1 root disk 8, 97 Aug 8 18:43 /dev/sdg1
[root@rac1 home]# fdisk -l
Disk /dev/sda: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8844 71039398+ 83 Linux
Disk /dev/sdb: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4079 32764536 82 Linux swap / Solaris
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 17784 142849948+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
Disk /dev/sdg: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 53352 428549908+ 83 Linux
Node 2
[root@rac2 ~]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:50 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:51 /dev/sda1
brw-r----- 1 root disk 8, 2 Aug 8 17:50 /dev/sda2
brw-r----- 1 root disk 8, 16 Aug 8 17:51 /dev/sdb
brw-r----- 1 root disk 8, 32 Aug 8 17:52 /dev/sdc
brw-r----- 1 root disk 8, 33 Aug 8 18:54 /dev/sdc1
brw-r----- 1 root disk 8, 48 Aug 8 17:52 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 17:52 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:54 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 17:52 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:54 /dev/sdf1
[root@rac2 ~]# fdisk -l
Disk /dev/sda: 145.4 GB, 145492017152 bytes
255 heads, 63 sectors/track, 17688 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8796 70653838+ 83 Linux
/dev/sda2 8797 12875 32764567+ 82 Linux swap / Solaris
Disk /dev/sdc: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 17784 142849948+ 83 Linux
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 53352 428549908+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
[root@rac2 ~]#
Thank you.
Edited by: user12144220 on Aug 10, 2011 1:10 AM
Edited by: user12144220 on Aug 10, 2011 1:11 AM
Edited by: user12144220 on Aug 10, 2011 1:13 AM
Maybe you are looking for
-
Does the Apple Store in Sydney have an e-mail address or facsimile number that I can contact them on?
-
Hi, I have the following sql: select u.user_name,gu.grd_usg_date, (gu.grd_usg_cpu_time)/3600 "CPU TIME" from jcvsf.grid_usage gu, jcvsf.dept_proj_user dpu, jcvsf.inv_user u, jcvsf.department d, jcvsf.project p where d.dept_id=dpu.dpu_dept_id and u.us
-
How to create overlap menu in iphone application
Hi, I am new to iPhone development. I want to create overlap menu in iPhone application, like if i select Menu button then menu will pop up. Please help.
-
2.0 Firmware update: router & car connection successes, failures & warning
1. I found out that my Touch doesn't see the network on my Airport extreme 802.11n operating on 5GHz in a mixed Airport Extreme network. It does, however, see & connect to an attached Airport extreme 802.11g operating on 2.4GHz (with WPA2). Conclusio
-
Unable to create SQL database in Azure
Hi, I have an Azure free trial account. However, it doesn't allow me to create a Basic tier SQL database on the management portal, but shows an error saying 'the operation is not supported for your subscription offer type'. My free trial only starte