Oracle 11gr2 RAC installation

Hi Gurus,
In new project we have proposed to have 2 nodes single site RAC database Oracle 11gR2 64 Bit . We are going to have OEL 5.4 64 Bit Linux as OS and IBM as machine .
We are migrating standalone 10g R2 database to 11r2 Rac and from HP-UX to OEL Linux . We are migrating from different datacenter .
What would be the pfile configuration (i mean memory size doubles ) in RAC ?
We are going to use IBM storage . Need light on followings . Pls help me out
1>Requirements for installation
2>Grid installation requirements
3>ASM instance is physical database instance or just service ?
4>Any oracle document for installation of 11gR2 Grid and RAC?
If you provide me authorized links of RAC installation that would be better .
Thanks & Regards

1>Requirements for installation
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10840/toc.htm
2>Grid installation requirements
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10812/toc.htm
3>ASM instance is physical database instance or just service ?
Resp.: ASM is a database instance (i.e. just the memory structures, no physical files). See this link:
4>Any oracle document for installation of 11gR2 Grid and RAC?
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10813/toc.htm (RAC), the GI is in item 2 above.
Always check the documentation site 1st: http://www.oracle.com/pls/db112/homepage

Similar Messages

SCAN Name issue in Oracle 11gR2 RAC Installation

Hi,
I am trying to install Oracle 11gR2 RAC on VM ware and I got the INS-40922 (Invalid SCAN name). Do I need to create the SCAN name prior to the installation?
I have public,private, and VIP's. I am not sure how I create this SCAN Name. Please share your thoughts
Thanks

During installation of grid infrastructure SCAN will be automatically created. If you are using DNS then put the scan name and scan ip addresses entries in DNS . If you are not using dns/gns then put scanname and scan ipadress hosts file on each node in the cluster. Before installation, you should not be able to ping scan ipadresses.

Oracle 11gR2 RAC installation with DNS

Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)

Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena

Oracle 11GR2 rac installation in vmware

Hi all experts,
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , i get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure
-bash: /etc/init.d/oracleasm: No such file or directory
I would appreciate if some one can help me out with this.

You have not installed the required RPMs, in order to configure ASM. You can find them below. You can follow this step by step guide on how to configure ASM Eriglen Gani's Blog: Step By Step: Configuring Automatic Storage Management (ASM) on Standalone Server with Oracle Enter…
oracleasm-2.6.18-194.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-194.el5xen-2.0.5-1.el5
oracleasm-2.6.18-194.el5PAE-2.0.5-1.el5
oracleasm-2.6.18-194.el5debug-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5

Oracle 11gR2 RAC Installation - ASM Disks - Need advice on configurations

Hi Guys
How many disks are needed for Voting, Data, Log and Failover. Each should be in a seperate group or it can be in a single group of disk. Please advice. Thanks.

Hi Friend,
Option 1 :
If Oracle Clusterware is used for implementing normal redundancy. We require the following for failover purpose also.
1. Two OCR files - 280 MB each
2. Three Voting Disks - 280 MB each
Total - 1.4 GB approx
Option 2 :
Oracle recommends that the disk used for the file system be on a RAID. When you use external redundancy the minimum requirement is One OCR and One Voting Disk with 280 MB each.
Choices :
1. External Redundancy - > Minimum No Of Disks (1) - > One OCR (280 MB) and One Voting Disk (280 MB) -> 580 MB
2. Normal Redundancy - > Minimum No Of Disks (3) - > Two OCR (560 MB) and Three Voting Disk (840 MB) -> 1.4 GB
3. High Redundancy - > Minimum No Of Disks (5) - > Three OCR (840 MB) and Five Voting Disk (1.4 GB) -> 2.3 GB
So, Choose based on redundancy...
Hope it helps..
Note : Use ASM for storing above files..
Thanks
LaserSoft

Oracle 11gR2 RAC - R language integration

Hello,
We want statistical language R integration with oracle database. Does this come with default installation of oracle database Oracle 11gR2 RAC ?
OR it requires EXADATA - BIGDATA (oracle appliance)?
Kindly let us know steps for installation /enabling R language ? Basically we are looking for 3 options (transparency, In-database, embedded). Optimal option choice is done automatically depending on R language script (I think R script needs to have different calls?)
Thanks

Please do NOT duplicate your questions here.
R is a language. Oracle is a database. You store data in a database. You write programs [using a language such as R] to extract and manipulate data from the database.

Oracle 11gR2 RAC with Sun clsuter 3.3 clsetup not showing ASMDiskGroup RS

Hello,
I am installing Oracle 11gR2 RAC on Solaris cluster 3.3 with hardware RAID and ASM
I was able to register rac-famework-rg and crs-framework-rg.
Oracle RAC is up and running (confirmed from crs_stat -t -v)
However, while creating option 5. Automatic Storage Management (ASM) on clsetup, I was getting ERROR: ASM is either not installed or the installation is invalid!
I have created the asm-inst-rg with resource asm-inst-rs and asm-dg-rg with resources asm-dg-fra, asm-dg-data and asm-dg-crs using CLI. Please find the complete clrg and clrs status output below:
root@rac1 # clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
rac-framework-rg rac1 No Online
rac2 No Online
asm-inst-rg rac1 No Online
rac2 No Online
asm-dg-rg rac1 No Online
rac2 No Online
root@rac1 # clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
crs_framework-rs rac1 Online Online
rac2 Online Online
rac-udlm-rs rac1 Online Online
rac2 Online Online
rac-framework-rs rac1 Online Online
rac2 Online Online
asm-inst-rs rac1 Online Online - +ASM1 is UP and ENABLED
rac2 Online Online - +ASM2 is UP and ENABLED
asm-dg-fra rac1 Online Online - Mounted: FRA
rac2 Online Online - Mounted: FRA
asm-dg-crs rac1 Online Online - Mounted: CRS
rac2 Online Online - Mounted: CRS
asm-dg-data rac1 Online Online - Mounted: DATA
rac2 Online Online - Mounted: DATA
Once I reach clsetup option 6: Resources for Oracle Real Application Clusters Database Instances, I was able to select cluster db name, oracle home, SID for both nodes, and it listed the asm-inst-rg and asm-inst-rs for selection of "Specify Oracle ASM Instance Resource".
The problem is the the next selection which is "Specify Oracle ASM Disk Group Resources" which does NOT list any asm-dg-rg or asm-dg-fra or anything, instead, it throws error "No existing disk-group resources available for selection. Run ASM subwizard create new resource(s) and come back to this panel for the selection."
Kindly guide me to create Resources for Oracle Real Application Clusters Database Instances either in CLI or clsetup
Thanks and Regards
Ushas Symon

Solaris Cluster 3.3 u1 solved the issue.
The problem right now I am facing is IPMP on the public interface.
When I remove the cable on the bge0, the ip on bge0 and the SCAN IP's are plumbed to bge1 which is in sc_ipmp0, but NOT the virtual IP!!! and the listeners on both nodes go offiline!!!
any inputs on the configuration will be highly appreciated..
Thanks and Regards
Ushas Symon

Oracle 11gR2 RAC - timeseries

Hello,
We would like to know if Oracle 11gR2 RAC supports timeseries data storage and time-series functions. Timeseries storage is quite different - in terms of storage optimization - block storages, compressions, columnar databases and others. Time-series functions like regressions, data-mining. Does these options come by default or we require statistical language R integration?
Thanks

937054 wrote:
Hello,
1. Usally time-series data goes in multiple millions, so timeseries databases like FAME,KDB,SYBASE-IQ are used. Does oracle11gr2 provide storage optmizations, compressions, columnar database like FAME,KDB,SYBASE-IQ?
The only methods of optimization are partitioning of the data by some date or if data set is narrow (few columns)l enough, partitioned IOT.
2. http://www.oracle.com/us/corporate/press/1515738
Link is about R statistical language and data mining integration with Oracle database 11gR2. Does this come default during installation or with BigData - EXADATA? OR this is a seperate license?I am not sure about the licensing, you will need to ask your sales person, but it looks like it might be apart of ODM (oracle data mining - a licensed product)
Take a read through this case study.
http://www.oracle.com/technetwork/database/options/advanced-analytics/odm/odmtelcowhitepaper-326595.pdf?ssSourceSiteId=ocomen
>
Thanks

Oracle 11gr2 RAC hardware

Hello experts,
how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
RAM 6GB
i7 processer, 500GB Hard Disk
Thanks in Advance.

Hi,
Also two more articles on the same portal with regards to 11gR2 RAC installations
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
Regards,

Oracle 11gR2 RAC: Running the script root.sh problem

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.

you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC)

Oracle 11gR2 RAC Root.sh Failed On The Second Node

Hello,
When i installing Oracle 11gR2 RAC on AIX 7.1 , root.sh succeeds on first node but fails on the second node:
I get error "Root.sh Failed On The Second Node With Error ORA-15018 ORA-15031 ORA-15025 ORA-27041 [ID 1459711.1]" within Oracle installation.
Applies to:
Oracle Server - 11gR2 RAC
EMC VNX 500
IBM AIX on POWER Systems (64-bit)
in /dev/rhdiskpower0 does not show in kfod output on second node. It is an EMC multipath disk device.
But the disk can be found with AIX command.
any help!!
Thanks

the soluation that uninstall "EMC solutitons enabler" but in the machine i just find "EMC migration enabler" and conn't remove without remove EMC Powerpath.

Oracle 11gR2 RAC Vs Linux Version

Hi Guys
Please let me know whether i can start the Oracle 11gR2 RAC Grid installation in RHEL 6 or the higher version. Will i able to download the ASM libs for RHEL 6 n greater version. Thanks.

Hi,
You can install 11.2.0.3 on RHEL 6 or OEL 6. Please note that asmlib rpms are no more available on RHEL 6 and hence will advise to go for OEL 6. For RHEL, you have to use udev rules.
Regards,
Sharma

Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
There are 3 ways to solve this issue:
1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
2) In the file /etc/profile, add line "umask 0022" at the end of the file.
3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Folks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

The best option to create a shared storage for Oracle 11gR2 RAC in OEL 5?

Hello,
Could you please tell me the best option to create a shared storage for Oracle 11gR2 RAC in Oracel Enterprise Linux 5? in production environment? And could you help to create shared storage? Because there is no additional step in Oracle installation guide. There are steps for only asm disk creation.
Thank you.

Here are names of partitions and permissions. Partitions which have 146 GB, 438 GB, 438 GB of capacity are my storage. Two of three disks which are 438 GB were configured as RAID 5 and remaining disk was configured as RAID 0. My storage is Dell MD 3000i and connected to nodes through ethernet.
Node 1
[root@rac1 home]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:39 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:40 /dev/sda1
brw-r----- 1 root disk 8, 16 Aug 8 17:39 /dev/sdb
brw-r----- 1 root disk 8, 17 Aug 8 17:39 /dev/sdb1
brw-r----- 1 root disk 8, 32 Aug 8 17:40 /dev/sdc
brw-r----- 1 root disk 8, 48 Aug 8 17:41 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 18:26 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:43 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 18:34 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:43 /dev/sdf1
brw-r----- 1 root disk 8, 96 Aug 8 18:34 /dev/sdg
brw-r----- 1 root disk 8, 97 Aug 8 18:43 /dev/sdg1
[root@rac1 home]# fdisk -l
Disk /dev/sda: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8844 71039398+ 83 Linux
Disk /dev/sdb: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4079 32764536 82 Linux swap / Solaris
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 17784 142849948+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
Disk /dev/sdg: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 53352 428549908+ 83 Linux
Node 2
[root@rac2 ~]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:50 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:51 /dev/sda1
brw-r----- 1 root disk 8, 2 Aug 8 17:50 /dev/sda2
brw-r----- 1 root disk 8, 16 Aug 8 17:51 /dev/sdb
brw-r----- 1 root disk 8, 32 Aug 8 17:52 /dev/sdc
brw-r----- 1 root disk 8, 33 Aug 8 18:54 /dev/sdc1
brw-r----- 1 root disk 8, 48 Aug 8 17:52 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 17:52 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:54 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 17:52 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:54 /dev/sdf1
[root@rac2 ~]# fdisk -l
Disk /dev/sda: 145.4 GB, 145492017152 bytes
255 heads, 63 sectors/track, 17688 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8796 70653838+ 83 Linux
/dev/sda2 8797 12875 32764567+ 82 Linux swap / Solaris
Disk /dev/sdc: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 17784 142849948+ 83 Linux
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 53352 428549908+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
[root@rac2 ~]#
Thank you.
Edited by: user12144220 on Aug 10, 2011 1:10 AM
Edited by: user12144220 on Aug 10, 2011 1:11 AM
Edited by: user12144220 on Aug 10, 2011 1:13 AM

Oracle 11gR2 RAC on Linux 5

Hi,
I am trying to setup Oracle 11gR2 RAC on Linux 5.4 64-bit machine. I have used OCFS2 for creating shared disks. Encountered with the following error message while installing "Grid Infrastructure".
[INS-30014] Unable to check wether the location specified is on CFS
[INS-40103] The installer has detected that the software location specified is on an OCFS2 partition.
[IS-41312] One or more locations specified for Oracle cluster Regestry (OCR) cannot be used.
[INS-41514] One or more locations specified for placing voting disks cannot be used.
-- At the time of configuration i have created 2 share disks, 1) For Oracle software 2) For voting disk and OCR
Provided the same details at time of Clusterware installation.
Please hel me.
Thanks,

Actually for both Oracle software and OCR i have used OCFS2. bcz earlier in Oracle 11g1 RAC i did the same and able to do smooth installation Well, you can no more do that with 11gR2 and it's clearly mentioned in 11gR2 Error messages documentation that configuration of grid Infrastructure software for a cluster is not supported on OCFS2 partition. You'll need to specify a location that is not an OCFS2 partition.
Search for the error INS-40103 message at http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/giinstaller_errormessages.htm
Cheers.

Oracle 11gr2 RAC installation

Similar Messages

Maybe you are looking for