Oracle 11gR2 RAC on Linux 5
Hi,
I am trying to setup Oracle 11gR2 RAC on Linux 5.4 64-bit machine. I have used OCFS2 for creating shared disks. Encountered with the following error message while installing "Grid Infrastructure".
[INS-30014] Unable to check wether the location specified is on CFS
[INS-40103] The installer has detected that the software location specified is on an OCFS2 partition.
[IS-41312] One or more locations specified for Oracle cluster Regestry (OCR) cannot be used.
[INS-41514] One or more locations specified for placing voting disks cannot be used.
-- At the time of configuration i have created 2 share disks, 1) For Oracle software 2) For voting disk and OCR
Provided the same details at time of Clusterware installation.
Please hel me.
Thanks,
Actually for both Oracle software and OCR i have used OCFS2. bcz earlier in Oracle 11g1 RAC i did the same and able to do smooth installation Well, you can no more do that with 11gR2 and it's clearly mentioned in 11gR2 Error messages documentation that configuration of grid Infrastructure software for a cluster is not supported on OCFS2 partition. You'll need to specify a location that is not an OCFS2 partition.
Search for the error INS-40103 message at http://download.oracle.com/docs/cd/E11882_01/server.112/e10880/giinstaller_errormessages.htm
Cheers.
Similar Messages
-
Uninstall of oracle 11gR2 RAC on linux
Hi all,
i am in learning stage, can anybody help me how to uninstall the Oracle 11gR2 RAC on linux.
thank you.http://gruffdba.wordpress.com/2012/10/29/oracle-11gr2-rac-install-cleaning-up-a-failed-install-on-linux/
you can go through this link you will get an idea -
Can we install Oracle 11gR2 RAC on Linux using OCFS2 for both Oracle software and OCR.
Actually i am facing problems with Oracle software location which is on OCFS2
Please help meThough it would be technically feasible, oracle recommends against sharing oracle binaries for RAC.
You would be better off installing oracle binaries on a local mount on all nodes rather than a shared file system.
Cheers. -
Oracle 11gR2 RAC Vs Linux Version
Hi Guys
Please let me know whether i can start the Oracle 11gR2 RAC Grid installation in RHEL 6 or the higher version. Will i able to download the ASM libs for RHEL 6 n greater version. Thanks.Hi,
You can install 11.2.0.3 on RHEL 6 or OEL 6. Please note that asmlib rpms are no more available on RHEL 6 and hence will advise to go for OEL 6. For RHEL, you have to use udev rules.
Regards,
Sharma -
Oracle 11gR2 RAC on Linux - testing/practice/lab purpose
Hi Gurus,
Need your assistance & help here, I've 3 servers, equipped with almost everything, for this testing/sufficient enough; cpu, memory & hard disk.
I'm looking for some guidance/assistance or link, doc or anything, which I should follow to build this RAC and then Data Gurad environment too, successfully.
This is just for practice purpose, as last time did in 2009 and it's been quite some time, forgot a lot of stuff.
Please provide some best practices, guidelines and assistance too, enable to build it correctly and successfully too.
Thanks a lot in advance.
Best regards.Hi,
check : http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php
and
ORACLE-BASE - Articles on Real Application Clusters (RAC) (12c, 11g, 10g, 9i)
replace virtual server used in this article for your physical server.
i also helped you to do a google search... https://www.google.com.ng/search?q=oracle+best+practices+for+rac&oq=oracle+best+practices+for+rac&aqs=chrome..69i57j0l5.…
HTH
Tobi -
Problem of Copying the Original VM to 2nd VM in Oracle 11gR2 RAC system
Folks,
Hello. I have been installing Oracle Database 11gR2 RAC system using 2 nodes that are 2 Virtual Machines (rac1 and rac2) on the top of VMPLayer 3.
I follow the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html to do.
The original Virtual Machine rac1 has run correctly. I configure rac1 network (eth0 and eth1) by opening VM rac1 and using command "[root@rac1\] #neat" as root user to invoke the network configuration.
For the second Virtual Machine rac2, I simply copy all files in "C:\VM\rac1" into "C:\VM\rac2". Then I have done the following:
1) In the directory "C:\VM\rac2", rename "rac1.vmx" to "rac2.vmx".
2) Change display name from "rac1" to "rac2" in the file "rac2.vmx".
The next thing to do for rac2 is to open the Virtual Machine rac2 and configure its network (eth0 and eth1) by using the command "[root@rac2\]#neat" as root user.
But by this step, I don't understand how to open the Virtual Machine rac2 so that can configure its network (eth0 and eth1).
Can any folk tell me how to open the VM rac2 to configure its network by this step ?
Thanks.Folks,
Hello. Thanks a lot for replying.
The public IP for eth0 and private IP for eth1 in the file "/etc/hosts" are as follows:
rac1 eth0 192.168.138.35 eth1 192.168.137.35
rac2 eth0 192.168.138.36 eth1 192.168.137.36
In rac1, I have added 2 entries in /etc/hosts as following:
#VIP for eth0
192.168.138.130 rac1-vip.localdomain rac1-genetic-vip
192.168.138.131 rac2-vip.localdomain rac2-cellar-vip
Then I execute the command: [root@rac1 /]# ping rac2
Output:
PING rac2.localdomain (192.168.138.36) 56(84) bytes of data
From rac1.localdomain (192.168.138.35) icmp_seq=1
Destination Host Unreachable
In rac2, I try to add the above 2 entries in /etc/hosts. But cannot save it. The following error message comes up:
"E45: readonly option is set (add ! to override)".
My questions are:
First, do I need to add VIP in the file "/etc/hosts" for both rac1 and rac2 ?
Second, why rac1 still cannot reach rac2 after add VIP in /etc/hosts for rac1 ?
Third, why the file "/etc/hosts" in rac2 is read-only ? How to change it to be editable ?
Thanks. -
Hello experts,
how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
RAM 6GB
i7 processer, 500GB Hard Disk
Thanks in Advance.Hi,
Also two more articles on the same portal with regards to 11gR2 RAC installations
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
Regards, -
Oracle 11gR2 RAC: Running the script root.sh problem
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC) -
Oracle 11gR2 RAC : How to resume runInstaller to continue to install Grid ?
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
After finish running the script root.sh in VM rac1 and rac2, the Computer is shut down automaticall because I don't touch the keyboad for a long time. When I resume the Computer, runInstaller Wizard is gone. My question is:
How to resume runInstaller to continue to install Grid ?
Thanks.Hi!
You can't resume runInstaller.
You must Clear you envinronment, and try again. -
Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
There are 3 ways to solve this issue:
1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
2) In the file /etc/profile, add line "umask 0022" at the end of the file.
3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.Folks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks. -
The best option to create a shared storage for Oracle 11gR2 RAC in OEL 5?
Hello,
Could you please tell me the best option to create a shared storage for Oracle 11gR2 RAC in Oracel Enterprise Linux 5? in production environment? And could you help to create shared storage? Because there is no additional step in Oracle installation guide. There are steps for only asm disk creation.
Thank you.Here are names of partitions and permissions. Partitions which have 146 GB, 438 GB, 438 GB of capacity are my storage. Two of three disks which are 438 GB were configured as RAID 5 and remaining disk was configured as RAID 0. My storage is Dell MD 3000i and connected to nodes through ethernet.
Node 1
[root@rac1 home]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:39 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:40 /dev/sda1
brw-r----- 1 root disk 8, 16 Aug 8 17:39 /dev/sdb
brw-r----- 1 root disk 8, 17 Aug 8 17:39 /dev/sdb1
brw-r----- 1 root disk 8, 32 Aug 8 17:40 /dev/sdc
brw-r----- 1 root disk 8, 48 Aug 8 17:41 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 18:26 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:43 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 18:34 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:43 /dev/sdf1
brw-r----- 1 root disk 8, 96 Aug 8 18:34 /dev/sdg
brw-r----- 1 root disk 8, 97 Aug 8 18:43 /dev/sdg1
[root@rac1 home]# fdisk -l
Disk /dev/sda: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8844 71039398+ 83 Linux
Disk /dev/sdb: 72.7 GB, 72746008576 bytes
255 heads, 63 sectors/track, 8844 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 4079 32764536 82 Linux swap / Solaris
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 17784 142849948+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
Disk /dev/sdg: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdg1 1 53352 428549908+ 83 Linux
Node 2
[root@rac2 ~]# ll /dev/sd*
brw-r----- 1 root disk 8, 0 Aug 8 17:50 /dev/sda
brw-r----- 1 root disk 8, 1 Aug 8 17:51 /dev/sda1
brw-r----- 1 root disk 8, 2 Aug 8 17:50 /dev/sda2
brw-r----- 1 root disk 8, 16 Aug 8 17:51 /dev/sdb
brw-r----- 1 root disk 8, 32 Aug 8 17:52 /dev/sdc
brw-r----- 1 root disk 8, 33 Aug 8 18:54 /dev/sdc1
brw-r----- 1 root disk 8, 48 Aug 8 17:52 /dev/sdd
brw-r----- 1 root disk 8, 64 Aug 8 17:52 /dev/sde
brw-r----- 1 root disk 8, 65 Aug 8 18:54 /dev/sde1
brw-r----- 1 root disk 8, 80 Aug 8 17:52 /dev/sdf
brw-r----- 1 root disk 8, 81 Aug 8 18:54 /dev/sdf1
[root@rac2 ~]# fdisk -l
Disk /dev/sda: 145.4 GB, 145492017152 bytes
255 heads, 63 sectors/track, 17688 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 8796 70653838+ 83 Linux
/dev/sda2 8797 12875 32764567+ 82 Linux swap / Solaris
Disk /dev/sdc: 146.2 GB, 146278449152 bytes
255 heads, 63 sectors/track, 17784 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 17784 142849948+ 83 Linux
Disk /dev/sdd: 20 MB, 20971520 bytes
1 heads, 40 sectors/track, 1024 cylinders
Units = cylinders of 40 * 512 = 20480 bytes
Device Boot Start End Blocks Id System
Disk /dev/sde: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 53352 428549908+ 83 Linux
Disk /dev/sdf: 438.8 GB, 438835347456 bytes
255 heads, 63 sectors/track, 53352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdf1 1 53352 428549908+ 83 Linux
[root@rac2 ~]#
Thank you.
Edited by: user12144220 on Aug 10, 2011 1:10 AM
Edited by: user12144220 on Aug 10, 2011 1:11 AM
Edited by: user12144220 on Aug 10, 2011 1:13 AM -
Installing Oracle 11gR2 RAC Problem: ASM disks
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
At the first time, I create VM rac1. While its OS Oracle Linux 5.6 is booting, initializing ASMLib Driver OK. I create 5 ASM disks successfully using the command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: OK
Because the hard disk space of rac1 is not enough to install Database, I create VM rac1 again with bigger hard disk space (30GB). I do everything the same with that at the first time. But this time, While OS Oracle Linux 5.6 is booting, initializing ASMLib Driver failed. I create 5 ASM disks using the same command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: failed
But when I use the command:
[root@rac1 /]# /etc/init.d/oracleasm listdisks
Output: ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5
My questions are:
First, can the 5 disks "ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5" be used correctly in spite of Marking disk "ASMDISK1(2 3 4 5)" as an ASM disk failed ?
Second, how to fix OS Oracle Linux 5.6 so that initializing ASMLib Driver OK while booting ?
Thanks.Folks,
Hello. The issue is solved by myself. Thanks. -
Install Oracle 11gR2 RAC : Cannot remove directory bootstrap under /tmp
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a "
In order to fix the above error, I run "cluster verification utility" according to
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/cvu.htm I run the following command:
[ora11g@rac1 \]$ /home_grid/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Output:
/bin/rm: cannot remove directory '/tmp/bootstrap': Operation not permitted
./runcluvfy.sh:line 99:/tmp/bootstrap/ouibootstrap.log: permission denied
From the above output, we can see the directory bootstrap under /tmp causes the problem. The solution is to remove the directory bootstrap. I run the 2 commands:
[ora11g@rac1 tmp]$ rmdir bootstrap
Output: Operation not permitted
[ora11g@rac1 tmp]$ rm -rf bootstrap
Output: cannot remove bootstrap: Operation not permitted.
[ora11g@rac2 tmp]$ ls
Output: there is no 'bootstrap' directory.
My questions are:
First, does "cannot remove boostrap in rac1" cause that /tmp in rac2 could not be determine mount point ?
Second, can any folk help to remove the directory bootstrap under /tmp ?
Thanks.Folks,
Hello. Thanks a lot for replying. I have just run the 2 commands:
[root@rac2 \]# chown -R ora11g:dba /u01
[root@rac2 \]# chmod -R 775 /u01
ora11g is the user who installs the Grid and /u01 is the directory where Grid is installed and dba is the group.
I go back to Grid Installer Step 7 of 10 in rac1 and check again and see as below:
Free Space: Rac2 : /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available
Expected Value: n/a
Actual Value: n/a
The problem is not solved after run the above 2 commands in rac2.
In addition, I have run Cluster Verification Utility using the command:
[ora11g@rac1 grid]./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -r 11gR2 -orainv ora11g -verbose
Output: All of items for rac2 are passed. There is only one item for rac1 is failed as below:
Check default user file creation mask:
NodeName: rac1
Available: 0002
Required: 0022
Comment: failed
As we see above, the result of CVU command is not the same with Grid Installer step 7 of 10 (Installation Environment Verification):
CVU command doesn't find /tmp mount point problem for rac2 that Grid Installer does.
Grid Installer step 7 of 10 doesn't find user file creation mask problem for rac1 that CVU command does.
I have tried to find out whether creation mask failed for rac1 causes /tmp problem for rac2. I have changed the line "umask 002" to "umask 0022" for rac1 in each of the 3 files below and run CVU command each time for each file:
rac1:
/etc/bashrc
/etc/profile
/etc/csh.cshrc
But chang the line "umask 002" to "umask 0022" for rac1 in each of the above 3 files does not solve the problem.
My questions are:
First, why is the result of CVU command not the same with that of Grid Installer step 7 of 10 ?
Second, why change the line "umask 002" to "umask 0022" in 3 files can't solve creation mask problem for rac1 ?
Third, how to solve /tmp problem for rac2 and creation mask problem for rac1 ?
Thanks. -
Reinstalling Oracle 11gR2 RAC Grid Problem - ASM Disks Group
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
The directory for installing Grid in the 2 VMs is the same: /u01
In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
I have understood it's not the right way to delete /u01. The right way is to follow the tutorial
http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC
But I have deleted /u01 and need to fix one by one. I install Grid again and get the error message on step 5 of 9 as follows:
[INS - 30516] Please specify unique disk groups.
[INS-3050] Empty ASM disk group.
Cause - Installer has detected the disk group name provided already exists on the system.
Action - Specify different disk group.
In Wizard, the previous Disk Group name is "DATA" and its Candidate disks (5 ASMDISKs) are gone. I try to use a different name "DATA2", but no ASMDISKs come up under "Candidate disks". For "ALL Disks", all ASMDISKs cannot be selected.
I want to use the same ASM disk group "DATA" and don't want to create a new disk group.
My question is:
How to have the previous ASM disks and its group "DATA" come up under "Candidate Disks" so that can use it again ?
Thanks.Hi, in case this helps anyone else. I got this INS-30516 error too was stumped for little while. I have 2 x 2-node RAC which are hitting same SAN. The first-built RAC has a DATA diskgroup. When went to build second RAC on new ASM disk new DIskgroup (but same diskgroup name DATA) got INS-30516 about diskgroup name already in use etc. Finally figured out all that was required was to restrict diskstring using button in installer to only retrieve the LUNS for this RAC (this was quick and dirty - all LUNS for both RAC being presented to both RAC). Once diskstring only searched for the LUNS required for this RAC only, e.g.
ORCL:DATA_P* (for DATA_PD and FRA_PD)
the error went away.
I also have DATA_DR and FRA_DR presenting to both RAC. Apparently it scans the header and if it finds a diskgroup name that is already in use based on the diskstring scan it will not allow reuse of the diskgroup name since it has no way of knowing that the other ASM disks are for a different RAC.
HTH -
Oracle 11gR2 RAC in LDOM Network issue
Hi, Requesting your expert advise regarding this configuration.
We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
vnet inside the LDOM are not tagged:
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:f9:ec:7f
vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
ether 0:14:4f:fb:2b:8f
Here is the whole configuration:
root@gp-cpu-suh004 # ldm -V
Logical Domains Manager (v 2.2.0.0)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.4
System PROM:
Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
root@gp-cpu-suh004 # ldm ls
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 2.5% 48m
oidrac1 active -n---- 5000 32 16G 0.0% 27m
root@gp-cpu-suh004 # ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 3.1% 48m
SOFTSTATE
Solaris running
UUID
e73421fe-7003-e748-be7e-801fee5bfcc7
MAC
00:21:28:f1:95:26
HOSTID
0x85f19526
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
VCPU
MEMORY
RA PA SIZE
0x20000000 0x20000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
keyboard-layout=US-English
nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
VCONS
NAME SERVICE PORT
UART
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oidrac1 active -n---- 5000 32 16G 0.0% 27m
SOFTSTATE
Solaris running
UUID
0fcbbf21-14a2-eb21-f544-d4424212f3ef
MAC
00:14:4f:f9:1b:d4
HOSTID
0x84f91bd4
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
CID CPUSET
VCPU
VID PID CID UTIL STRAND
MEMORY
RA PA SIZE
0x20000000 0x420000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot?=true
boot-device=disk:a
keyboard-layout=US-English
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
DISK
NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
oid_data data_oid@primary-vds0 1 disk@1 primary
oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
VCONS
NAME SERVICE PORT
oidrac1 primary-vcc0@primary 5000
root@gp-cpu-suh004 # ldm ls-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
root@gp-cpu-suh004 # dladm show-link
vsw0 type: non-vlan mtu: 1500 device: vsw0
vsw1 type: non-vlan mtu: 1500 device: vsw1
vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
qlge0 type: non-vlan mtu: 1500 device: qlge0
qlge1 type: non-vlan mtu: 1500 device: qlge1
qlge2 type: non-vlan mtu: 1500 device: qlge2
qlge3 type: non-vlan mtu: 1500 device: qlge3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
root@gp-cpu-suh004 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
ether 0:21:28:f1:95:26
vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:fa:33:8b
root@gp-cpu-suh004 # netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 10.220.128.1 UG 1 7
10.220.128.0 10.220.128.9 U 1 5 vsw1501001
10.223.0.0 10.223.12.1 UG 1 2
10.223.12.0 10.223.12.14 U 1 1 igb0
224.0.0.0 10.220.128.9 U 1 0 vsw1501001
127.0.0.1 127.0.0.1 UH 8 261 lo0Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
Here's the VNET config for the other LDOM in the RAC cluster:
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
Thanks for reviewing my configuration.
Maybe you are looking for
-
Hi All Wanted to understand the concept of Down payment chain in SAP... Its use and significance.. Any documents/links other than SAP help would be helpful please. Regards Prasanna
-
can some clear me the message mapping posted in the blog by pooja pandey /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm i didn't get message mapping done with idoc on sender side and what is on the other side? this is wa
-
Hi, Please help.. My iphone cable charger got a problem. its not charging now or charging for a while only. When I try to charge, it shows "the accessory may not be supported" , But some time it charges for a while and shows the message. What might b
-
The WD My Passport isn't showing up after installing 10.9.2
hello! I just updated my OS to 10.9.4 and the WD external drive isn't showing up at all. When i go to Disk Utilities... it shows up but states something about my needing to update the partition or something. Any help is greatly appreciated. as you ca
-
I need to purchase a newer used apple computer in order to run Firefox 8, what are the min. system requirements?