Oracle 11gR2 RAC with ASM with asm_preferred_read_failure_group

Hello DBAs,
I apologize first if this question has been posted somewhere.
I have a two nodes cluster so essentially, I have 2 ASM instances (ASM1 & ASM2). It seems like both instances share the same ASM spfile.
+ASM1> show parameter spfile;
NAME TYPE VALUE
spfile string +OCRDG/clone-cluster/asmparame
terfile/registry.253.759424467
=====================================
+ASM2> show parameter spfile;
NAME TYPE VALUE
spfile string +OCRDG/clone-cluster/asmparame
terfile/registry.253.759424467
The Oracle docs says that you can configure asm_preferred_read_failure_group for each instance so when I logged in instance 1, I ran the command:
+ASM1> alter system set asm_preferred_read_failure_groups='DATA.FG1', 'DATA.FG2';
then it showed DATA.FG1 is primary and DATA.FG2 is secondary but this also shows on instance 2 because it uses the same spfile.
How can I make instance 1 uses DATA.FG1 for primary and instance 2 uses DATA.FG2 for primary. I have separate GRID home for each node.
Any help is much appreciated.
thanks,
TD

user11380530 wrote:
Hello DBAs,
I apologize first if this question has been posted somewhere.
I have a two nodes cluster so essentially, I have 2 ASM instances (ASM1 & ASM2). It seems like both instances share the same ASM spfile.
+ASM1> show parameter spfile;
NAME TYPE VALUE
spfile string +OCRDG/clone-cluster/asmparame
terfile/registry.253.759424467
=====================================
+ASM2> show parameter spfile;
NAME TYPE VALUE
spfile string +OCRDG/clone-cluster/asmparame
terfile/registry.253.759424467
The Oracle docs says that you can configure asm_preferred_read_failure_group for each instance so when I logged in instance 1, I ran the command:
+ASM1> alter system set asm_preferred_read_failure_groups='DATA.FG1', 'DATA.FG2';
then it showed DATA.FG1 is primary and DATA.FG2 is secondary but this also shows on instance 2 because it uses the same spfile.
How can I make instance 1 uses DATA.FG1 for primary and instance 2 uses DATA.FG2 for primary. I have separate GRID home for each node.
Any help is much appreciated.Normally we can give different values for each instance, But i never tried in ASM.
Here is example
SQL> alter system set asm_preferred_read_failure_groups='DATA.FG1' sid='ASM1';
SQL> alter system set asm_preferred_read_failure_groups='DATA.FG2' sid='ASM2';So DATA.FG1 will be allocated to ASM1, DATA.FG2 will be allocated to ASM2.
Now check from ASM1
SQL> show parameter asm_preferred_read_failure_group
& from ASM2
SQL> show parameter asm_preferred_read_failure_group
HTH.

Similar Messages

Installing Oracle 11gR2 RAC Problem: ASM disks

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
At the first time, I create VM rac1. While its OS Oracle Linux 5.6 is booting, initializing ASMLib Driver OK. I create 5 ASM disks successfully using the command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: OK
Because the hard disk space of rac1 is not enough to install Database, I create VM rac1 again with bigger hard disk space (30GB). I do everything the same with that at the first time. But this time, While OS Oracle Linux 5.6 is booting, initializing ASMLib Driver failed. I create 5 ASM disks using the same command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: failed
But when I use the command:
[root@rac1 /]# /etc/init.d/oracleasm listdisks
Output: ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5
My questions are:
First, can the 5 disks "ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5" be used correctly in spite of Marking disk "ASMDISK1(2 3 4 5)" as an ASM disk failed ?
Second, how to fix OS Oracle Linux 5.6 so that initializing ASMLib Driver OK while booting ?
Thanks.

Folks,
Hello. The issue is solved by myself. Thanks.

Oracle 11gR2 RAC Installation - ASM Disks - Need advice on configurations

Hi Guys
How many disks are needed for Voting, Data, Log and Failover. Each should be in a seperate group or it can be in a single group of disk. Please advice. Thanks.

Hi Friend,
Option 1 :
If Oracle Clusterware is used for implementing normal redundancy. We require the following for failover purpose also.
1. Two OCR files - 280 MB each
2. Three Voting Disks - 280 MB each
Total - 1.4 GB approx
Option 2 :
Oracle recommends that the disk used for the file system be on a RAID. When you use external redundancy the minimum requirement is One OCR and One Voting Disk with 280 MB each.
Choices :
1. External Redundancy - > Minimum No Of Disks (1) - > One OCR (280 MB) and One Voting Disk (280 MB) -> 580 MB
2. Normal Redundancy - > Minimum No Of Disks (3) - > Two OCR (560 MB) and Three Voting Disk (840 MB) -> 1.4 GB
3. High Redundancy - > Minimum No Of Disks (5) - > Three OCR (840 MB) and Five Voting Disk (1.4 GB) -> 2.3 GB
So, Choose based on redundancy...
Hope it helps..
Note : Use ASM for storing above files..
Thanks
LaserSoft

Oracle 11gR2 RAC and DR setup

Environment:
Oracle 11gR2 RAC (2 node) with ASM
HP-UX B.11.31 U ia64
We have configured two ASM disk group for Data & FRA, and we configured RMAN backup into FRA location. Now our Database, Log file, Archive logs and RMAN backup files all are in ASM on primary site.
Our network team is using Recover Point to mirror all the disks into DR site; we have no setup from Oracle side. What is the possible configuration that we need to have in DR site from Oracle side in order to bring-up the database in-case of primary site failure (disaster).
I am new to Oracle RAC can some one give me a suggestion.
- Mano

What is the possible configuration that we need to have in DR site from Oracle side in order to bring-up the database in-case of primary site failure ORACLE DATAGUARD is what you need; not RAC

Oracle 11gR2 RAC with Sun clsuter 3.3 clsetup not showing ASMDiskGroup RS

Hello,
I am installing Oracle 11gR2 RAC on Solaris cluster 3.3 with hardware RAID and ASM
I was able to register rac-famework-rg and crs-framework-rg.
Oracle RAC is up and running (confirmed from crs_stat -t -v)
However, while creating option 5. Automatic Storage Management (ASM) on clsetup, I was getting ERROR: ASM is either not installed or the installation is invalid!
I have created the asm-inst-rg with resource asm-inst-rs and asm-dg-rg with resources asm-dg-fra, asm-dg-data and asm-dg-crs using CLI. Please find the complete clrg and clrs status output below:
root@rac1 # clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
rac-framework-rg rac1 No Online
rac2 No Online
asm-inst-rg rac1 No Online
rac2 No Online
asm-dg-rg rac1 No Online
rac2 No Online
root@rac1 # clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
crs_framework-rs rac1 Online Online
rac2 Online Online
rac-udlm-rs rac1 Online Online
rac2 Online Online
rac-framework-rs rac1 Online Online
rac2 Online Online
asm-inst-rs rac1 Online Online - +ASM1 is UP and ENABLED
rac2 Online Online - +ASM2 is UP and ENABLED
asm-dg-fra rac1 Online Online - Mounted: FRA
rac2 Online Online - Mounted: FRA
asm-dg-crs rac1 Online Online - Mounted: CRS
rac2 Online Online - Mounted: CRS
asm-dg-data rac1 Online Online - Mounted: DATA
rac2 Online Online - Mounted: DATA
Once I reach clsetup option 6: Resources for Oracle Real Application Clusters Database Instances, I was able to select cluster db name, oracle home, SID for both nodes, and it listed the asm-inst-rg and asm-inst-rs for selection of "Specify Oracle ASM Instance Resource".
The problem is the the next selection which is "Specify Oracle ASM Disk Group Resources" which does NOT list any asm-dg-rg or asm-dg-fra or anything, instead, it throws error "No existing disk-group resources available for selection. Run ASM subwizard create new resource(s) and come back to this panel for the selection."
Kindly guide me to create Resources for Oracle Real Application Clusters Database Instances either in CLI or clsetup
Thanks and Regards
Ushas Symon

Solaris Cluster 3.3 u1 solved the issue.
The problem right now I am facing is IPMP on the public interface.
When I remove the cable on the bge0, the ip on bge0 and the SCAN IP's are plumbed to bge1 which is in sc_ipmp0, but NOT the virtual IP!!! and the listeners on both nodes go offiline!!!
any inputs on the configuration will be highly appreciated..
Thanks and Regards
Ushas Symon

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Oracle 11gR2 RAC clusterware not picking up ASM diskgroups

Hello: I had to deinstall a failed oracle 11gR2 rac cuslterware. But, not the asm disks are not in the OUI pick list. How can I resolve that?
The storage is on SAN partitions.

Probably the install already put something on the disks.
Clean them with dd if=/dev/zero of=<your asm disks> bs=1M count=10
Regards
Sebastian

RAC and ASM with geographically seperated disks

We are planning to use RAC and ASM with four nodes. The two nodes will be at one location and another two nodes at different location. The ASM disks also will be available locally. Is it possible to configure ASM with geographycally serepared disks.
We are thinking of two RAC and ASM setups with two nodes each and streams replication between the RACs.
I want to know what is the best method to implement. Is it RAC with four nodes OR two RACs with two nodes each and streams replication between the RACs.

Apart from the latency issue, which has been mentioned by others, you also need to mirror your disks between the two sites and be very careful about split brain scenarios under node or site crashes.
You need to mirror the disks between the sites in case one site crashes completely and loses all network access. The only way the second site can carry on is if it has access to all the data disks, and the cluster control disks (terms vary for this, such as quorum or voting disk). If you do not mirror you simply do not have a resilient design. Resilience is about eliminating all single points of failures, which means duplicating everything i.e. mirroring.
And mirroring between two remote sites adds more volume to the data traffic between the two sites. And it would need to be synchronous rather than asynchronous to guarantee no data loss. And your commits for each transaction would be limited by the round trip time to write to the remote site and get the acknowledgement back.
Split brain is something you need to avoid with remote clusters, and local clusters too. If the network goes down between the two sites and both sites have local copies of all of the data and cluster control disks, which site becomes the primary and which one becomes the standby? You cannot have both sites coming back up as primary with active databases and accepting transactions! At this point you have split brain, and each side is processing transactions independently, and both databases are now deviating from each other with different data changes.
I don't think a 4 node RAC environment split across geographical distances is really viable, except under small transaction volumes, and where response time (transaction time) is not critical. If you have high volumes and need fast transactions then you need to only use local RAC configurations, and replicate between the two sites asynchronously. DataGuard is easier, but you need to decide if you need Streams and how to make it work for you.
John

Oracle Database 11gR2 RAC - Configure ASM Libraries on VM

Folks,
Hello. I am installing Oracle 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2 - Oracle Linux 5.6) on the top of VMPlayer.
I am configuring ASM libraries on rac1 using the command:
[root@rac1 dev]# oracleasm configure -i
But this message comes up:"Command not found."
I cannot find the directory where "oracleasm" is located. Can any folk help to solve the issue ?
Thanks in advance.

I would suggest you to take a look at these guides
http://www.oracle-base.com/articles/11g/Articles11g.php#db11g_release_2_installations
Many of them are installed in virtual machines.

Reinstalling Oracle 11gR2 RAC Grid Problem - ASM Disks Group

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
The directory for installing Grid in the 2 VMs is the same: /u01
In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
I have understood it's not the right way to delete /u01. The right way is to follow the tutorial
http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC
But I have deleted /u01 and need to fix one by one. I install Grid again and get the error message on step 5 of 9 as follows:
[INS - 30516] Please specify unique disk groups.
[INS-3050] Empty ASM disk group.
Cause - Installer has detected the disk group name provided already exists on the system.
Action - Specify different disk group.
In Wizard, the previous Disk Group name is "DATA" and its Candidate disks (5 ASMDISKs) are gone. I try to use a different name "DATA2", but no ASMDISKs come up under "Candidate disks". For "ALL Disks", all ASMDISKs cannot be selected.
I want to use the same ASM disk group "DATA" and don't want to create a new disk group.
My question is:
How to have the previous ASM disks and its group "DATA" come up under "Candidate Disks" so that can use it again ?
Thanks.

Hi, in case this helps anyone else. I got this INS-30516 error too was stumped for little while. I have 2 x 2-node RAC which are hitting same SAN. The first-built RAC has a DATA diskgroup. When went to build second RAC on new ASM disk new DIskgroup (but same diskgroup name DATA) got INS-30516 about diskgroup name already in use etc. Finally figured out all that was required was to restrict diskstring using button in installer to only retrieve the LUNS for this RAC (this was quick and dirty - all LUNS for both RAC being presented to both RAC). Once diskstring only searched for the LUNS required for this RAC only, e.g.
ORCL:DATA_P* (for DATA_PD and FRA_PD)
the error went away.
I also have DATA_DR and FRA_DR presenting to both RAC. Apparently it scans the header and if it finds a diskgroup name that is already in use based on the diskstring scan it will not allow reuse of the diskgroup name since it has no way of knowing that the other ASM disks are for a different RAC.
HTH

Oracle 11gR2 RAC: Running the script root.sh problem

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.

you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC)

Oracle 11gR2 RAC Backup & Recovery

I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC.
- Mano

ManoRangasamy wrote:
I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC. There won't be any different settings for RMAN for RAC except for where and how you would be configuring the Archive logs and place your backups. Both, ideally speaking, should be on the shared storage like ASM but there are other combinations also possible. Review the above given links for the same. That should provide a good starting point.
Aman....

Oracle 11gR2 RAC in LDOM Network issue

Hi, Requesting your expert advise regarding this configuration.
We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
vnet inside the LDOM are not tagged:
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:f9:ec:7f
vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
ether 0:14:4f:fb:2b:8f
Here is the whole configuration:
root@gp-cpu-suh004 # ldm -V
Logical Domains Manager (v 2.2.0.0)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.4
System PROM:
Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
root@gp-cpu-suh004 # ldm ls
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 2.5% 48m
oidrac1 active -n---- 5000 32 16G 0.0% 27m
root@gp-cpu-suh004 # ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 3.1% 48m
SOFTSTATE
Solaris running
UUID
e73421fe-7003-e748-be7e-801fee5bfcc7
MAC
00:21:28:f1:95:26
HOSTID
0x85f19526
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
VCPU
MEMORY
RA PA SIZE
0x20000000 0x20000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
keyboard-layout=US-English
nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
VCONS
NAME SERVICE PORT
UART
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oidrac1 active -n---- 5000 32 16G 0.0% 27m
SOFTSTATE
Solaris running
UUID
0fcbbf21-14a2-eb21-f544-d4424212f3ef
MAC
00:14:4f:f9:1b:d4
HOSTID
0x84f91bd4
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
CID CPUSET
VCPU
VID PID CID UTIL STRAND
MEMORY
RA PA SIZE
0x20000000 0x420000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot?=true
boot-device=disk:a
keyboard-layout=US-English
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
DISK
NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
oid_data data_oid@primary-vds0 1 disk@1 primary
oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
VCONS
NAME SERVICE PORT
oidrac1 primary-vcc0@primary 5000
root@gp-cpu-suh004 # ldm ls-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
root@gp-cpu-suh004 # dladm show-link
vsw0 type: non-vlan mtu: 1500 device: vsw0
vsw1 type: non-vlan mtu: 1500 device: vsw1
vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
qlge0 type: non-vlan mtu: 1500 device: qlge0
qlge1 type: non-vlan mtu: 1500 device: qlge1
qlge2 type: non-vlan mtu: 1500 device: qlge2
qlge3 type: non-vlan mtu: 1500 device: qlge3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
root@gp-cpu-suh004 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
ether 0:21:28:f1:95:26
vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:fa:33:8b
root@gp-cpu-suh004 # netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 10.220.128.1 UG 1 7
10.220.128.0 10.220.128.9 U 1 5 vsw1501001
10.223.0.0 10.223.12.1 UG 1 2
10.223.12.0 10.223.12.14 U 1 1 igb0
224.0.0.0 10.220.128.9 U 1 0 vsw1501001
127.0.0.1 127.0.0.1 UH 8 261 lo0

Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
Here's the VNET config for the other LDOM in the RAC cluster:
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
Thanks for reviewing my configuration.

Oracle 11gR2 RAC - R language integration

Hello,
We want statistical language R integration with oracle database. Does this come with default installation of oracle database Oracle 11gR2 RAC ?
OR it requires EXADATA - BIGDATA (oracle appliance)?
Kindly let us know steps for installation /enabling R language ? Basically we are looking for 3 options (transparency, In-database, embedded). Optimal option choice is done automatically depending on R language script (I think R script needs to have different calls?)
Thanks

Please do NOT duplicate your questions here.
R is a language. Oracle is a database. You store data in a database. You write programs [using a language such as R] to extract and manipulate data from the database.

Oracle 11gR2 RAC - timeseries

Hello,
We would like to know if Oracle 11gR2 RAC supports timeseries data storage and time-series functions. Timeseries storage is quite different - in terms of storage optimization - block storages, compressions, columnar databases and others. Time-series functions like regressions, data-mining. Does these options come by default or we require statistical language R integration?
Thanks

937054 wrote:
Hello,
1. Usally time-series data goes in multiple millions, so timeseries databases like FAME,KDB,SYBASE-IQ are used. Does oracle11gr2 provide storage optmizations, compressions, columnar database like FAME,KDB,SYBASE-IQ?
The only methods of optimization are partitioning of the data by some date or if data set is narrow (few columns)l enough, partitioned IOT.
2. http://www.oracle.com/us/corporate/press/1515738
Link is about R statistical language and data mining integration with Oracle database 11gR2. Does this come default during installation or with BigData - EXADATA? OR this is a seperate license?I am not sure about the licensing, you will need to ask your sales person, but it looks like it might be apart of ODM (oracle data mining - a licensed product)
Take a read through this case study.
http://www.oracle.com/technetwork/database/options/advanced-analytics/odm/odmtelcowhitepaper-326595.pdf?ssSourceSiteId=ocomen
>
Thanks

Oracle 11gr2 RAC hardware

Hello experts,
how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
RAM 6GB
i7 processer, 500GB Hard Disk
Thanks in Advance.

Hi,
Also two more articles on the same portal with regards to 11gR2 RAC installations
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
Regards,

Oracle 11gR2 RAC with ASM with asm_preferred_read_failure_group

Similar Messages

Maybe you are looking for