Oracle 12c Environment does not meet minimum requirements

Trying to install Oracle 12c on Red Hat Linux Enterprise 6 and getting the following error message;
WARNING: [WARNING] [INS-13001] Environment does not meet minimum requirements.
CAUSE: Minimum requirements were not met for this environment
ACTION: Either check the logs for more information or check the supported configurations for this product..
I know that In version 11g it would list the RPM that are missing for the install. Where can I find the same thing for 12c?
Looking at the log file;
---# Begin Stacktrace #---------------------------
ID: oracle.install.ivw.common.validator.SupportedOSValidator:381
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:354)
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:200)
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:182)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8304)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8253)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:7300)
at oracle.install.library.util.cvu.CVUHelper.isPreReqSupported(CVUHelper.java:377)
at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnvironment(SupportedOSValidator.java:67)
at oracle.install.ivw.common.validator.SupportedOSValidator.validate(SupportedOSValidator.java:94)
at oracle.install.commons.flow.validation.ValidationHelper.validateState(ValidationHelper.java:188)
at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlowExecutor.java:420)
at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(AbstractFlowExecutor.java:644)
at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:336)
at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:276)
at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:235)
at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:129)
at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:105)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:439)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
---# End Stacktrace #-----------------------------
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:384
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:354)
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:200)
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:182)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8304)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:8253)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:7300)
at oracle.install.library.util.cvu.CVUHelper.isPreReqSupported(CVUHelper.java:377)
at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnvironment(SupportedOSValidator.java:67)
at oracle.install.ivw.common.validator.SupportedOSValidator.validate(SupportedOSValidator.java:94)
at oracle.install.commons.flow.validation.ValidationHelper.validateState(ValidationHelper.java:188)
at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlowExecutor.java:420)
at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(AbstractFlowExecutor.java:644)
at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:336)
at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:276)
at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:235)
at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:129)
at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:105)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:439)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
---# End Stacktrace #-----------------------------

Check page #58 of below document.
http://docs.oracle.com/cd/E16655_01/install.121/e17720.pdf
For other linux
Oracle Linux 6:
# yum install oracle-rdbms-server-12cR1-preinstall
Oracle Linux 5:
# yum install oracle-validated
HTH
Anuj
Oracle 12c SIG --> http://www.linkedin.com/groups?gid=4847720&mostPopular=&trk=tyah

Similar Messages

Oracle Installer:[INS-13001] Environment does not meet minimum requirements

Hi,
I am trying to install the latest Oracle Database software on the latest Oracle Enterprise Linux and the installer returns "Environment does not meet minimum requirements".
Oracle Enterprise Linux 6.3 x86-32
Oracle Database 11.2.0.3 x86-32
cd /stage/Oracle_Database_11.2.0.3_Linux/x86_32/database
./runInstaller
1. Configure Security Updates <next>
2. Download Software Updates <next>
Get the warning screen with the error,
Oracle 11g Database Release 2 Installer:
[INS-13001] Environment does not meet minimum requirements.
Are you sure you want to continue ?
I looked the log file but it didn't tell much.
cd /tmp/OraInstall2012-12-15_04-26-04PM
tail installActions2012-12-15_04-26-04PM.log
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
SEVERE: CVU do not support target environment..
Refer associated stacktrace #oracle.install.ivw.common.validator.SupportedOSValidator:371
INFO: Completed verification of target environment.
WARNING: Verification of target environment returned with errors.
WARNING: [WARNING] [INS-13001] Environment does not meet minimum requirements.
CAUSE: Minimum requirements were not met for this environment
ACTION: Either check the logs for more information or check the supported configurations for this product..
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:374
INFO: Advice is WITHDRAW
WARNING: Advised to shutdown the installer due to target environment verification errors.
INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Database 11g Release 2 Installer
Have you seen this before?
Thanks,
Marcelo Marques
Technical Manager, Esri

Hi,
A follow up on my comments from the previous message.
"The DNS server failed to resolve the nslookup using host.domain."
[marcelo]: I don't think this is a major problem, I have installed on the same hardware OEL5 and Oracle 11.2.0.1 without problems.
$ nslookup student03
Server: 8.8.8.8
Address: 8.8.8.8#53
** server can't find student03: NXDOMAIN
"You have incorrect versions of binutils, compat_libcap1, compat-libstdc++-33, gcc, gcc-c++, glibc, glibc-devel, ksh, libaio, libaio-devel, libgcc, libstdc++, libstdc++-devel, make, or sysstat installed on your system. Make sure that the correct versions are installed. For the required versions, see Knowledge Article 169706.1."
[marcelo]: I have reinstalled the rmps but still get the same problem.
[root@student03 Packages_x86_32]# rpm -Uvh binutils-2*
Preparing... ########################################### [100%]
package binutils-2.20.51.0.2-5.34.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh compat-libcap1*
Preparing... ########################################### [100%]
package compat-libcap1-1.10-1.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh compat-libstdc++*
Preparing... ########################################### [100%]
package compat-libstdc++-33-3.2.3-69.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh gcc-4*[root@student03 Packages_x86_32]# rpm -Uvh glibc-2*
Preparing... ########################################### [100%]
package glibc-2.12-1.80.el6.i686 is already installed
Preparing... ########################################### [100%]
package gcc-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh gcc-c++-4*
Preparing... ########################################### [100%]
package gcc-c++-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh glibc-2*
Preparing... ########################################### [100%]
package glibc-2.12-1.80.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh glibc-devel*
Preparing... ########################################### [100%]
package glibc-devel-2.12-1.80.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh ksh*
Preparing... ########################################### [100%]
package ksh-20100621-16.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libaio*
Preparing... ########################################### [100%]
package libaio-0.3.107-10.el6.i686 is already installed
package libaio-devel-0.3.107-10.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libaio-devel*
Preparing... ########################################### [100%]
package libaio-devel-0.3.107-10.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libgcc*
Preparing... ########################################### [100%]
package libgcc-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libstdc++*
Preparing... ########################################### [100%]
package libstdc++-4.4.6-4.el6.i686 is already installed
package libstdc++-devel-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libstdc++-devel*
Preparing... ########################################### [100%]
package libstdc++-devel-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh make*
Preparing... ########################################### [100%]
package make-1:3.81-20.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh sysstat*
Preparing... ########################################### [100%]
package sysstat-9.0.4-20.el6.i686 is already installed
Thanks,
Marcelo

My PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an Update for a newer version of my op.sys. software, or, what is a better choice of an Upgrade?

my PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of FireFox ... is there an UpDate to a newer version of my op.sys. software, Or, what is a better choice of an UpGrade to a newer/different op.sys. software ?
Thanx!

The best maintained PowerPC browser at the moment is TenFourFox:
http://www.floodgap.com/software/tenfourfox/
It is a Mac port of a newer version of FF thatn any PowerPC Mac can support natively. It runs, looks and feel like FF.
I found some add-ons that helped TFF with speed issues. Pleae see my post in another PPC forum:
FYI: Speed-up for TenFourFox on PowerPC

Software problem? Installed graphics card does not meet minimum requirements

Ok - I seem to have just met the same problem that others have experienced. MB Pro, less than 3 years old, graphics card NVIDIA GeForce 9400M 256MB. I have been using Aperture up until about 1/2 hour ago with no problem. Just now trying to sync my iPad, and Aperture (which launches automatically) responds with "installed graphics card does not meet minimum requirements". All software is fully up to date, running latest versions of all Apple software. What is going on please? I have restarted several times, tried Command/Option/P/R on restarting, but nothing seems to make it work.

You might try to reboot again, this time with the Shift-key hold down to boot into safe mode. This will clear some caches and reset the graphics card. Aperture will not run in safe mode. You will have to reboot a second time.
Do you use an external Monitor? Then disconnect it, before rebooting.
Regards
Léonie
P.S: Do you use a blue tooth keyboard? If you turn it on while booting, you may accidentally boot into Safe mode without noticing it, and then Aperture will give exactly the above error message.

Adobe CS3 Windows 7 installation says does not meet minimum requirements

I am trying to install Adobe Creative Suite 3 Design Premium on a brand new Windows 7 machine (32-bit). It is a downloaded copy from Adobe's website.
When I start the install process, it takes me to the "Options" Screen and will not let me install Photoshop, Illustrator, or InDesign. All those options are grayed out.
At the bottom, the reason it gives is as follows:
"The minimum system requirements listed below needed to run adobe photoshop cs3 are required and are not met:
- Windows XP (Service Pack 2)
- Windows Vista"
It gives the same error for the other 2 programs as well.
I have tried the following troubleshooting steps already with no luck:
1. Run Setup.exe as Administrator
2. Run Setup.exe in compatibility mode (either as Windows XP SP2, or Windows Vista)
3. Logged-in to Administrator profile and tried installing from there
4. did the regsvr32 on both vbscript.dll and jscript.dll.
5. Tried the CS3 cleanup tool at multiple levels.
6. Made sure there are no other Adobe products installed
7. Called Adobe Tech support, they are no help. They said to re-install the OS, which doesn't make any sense since it's a clean install.
No AV installed yet, so that's not the issue either.
Any ideas?

I realise I'm a bit late to the party here.. but after spending a few hours going through the Adobe CS3 Bootstrapper and Install process and files, I have the answer to why Windows 7 does not meet the minimum requirements.
The answer is in the xml files contained in the payloads for the CS3 Installation.
Line 72786 of AdobeIllustrator13en_US.proxy.xml :
<SystemRequirementsJSON>[
     {"OS":{"Windows":{"XP":{"Exclude":true,"Require":{"MinServicePack":"2","@servicePack64Bit" :1
,"Need64Bit":"0"}},"Server2003":{"Exclude":true},"Vista":{"Require":true}}},
                              "Memory":{"System":{"Default":{"Require":"512","Exclude":"500"}}},
                              "Display":{"Default":{"Require":{"Width":"1024","Height":"768"},"Exclude":{"Width":"800"," Height":"600"}}}
]</SystemRequirementsJSON>
Basically it is this: For Adobe Illustrator CS3 the following is supported: Windows XP SP2, or Vista ONLY
Not Windows XP SP2 or above, or Windows XP SP2 and Vista or above ...
The same is in several other files, but not all. Illustrator and InDesign are the 2 that I know of.
I have 500 odd machines that I need to deploy this software to.
If Adobe would like to offer a work around with consideration to deploying the software silently via Microsoft SMS to 500 Windows 7 Workstations - I would be most grateful.
My rage at software installer developers with such little foresight is only tempered by the knowledge that the task itself is so difficult.
However, that does not excuse the lack of thought given to how enterprise level administrators are supposed to deal with updates, patches, and deployments to machines where users have limited rights, and the difficulty that is caused by the inclusion of unhelpful and sparse documentation and software (such as Adobe Updater).

After updating to lion installed graphics card does not meet minimum requirements for aperture

Hello,
I updated to OSX lion yesterday. and Apterture is given me this error message. "The installed graphics card does not meet the minimum requirements for Aperture.   I tried the Option Command Open app thing to try rebuild the database. But nothing happens when I try opeing the app using those combo key's So I removed the app using mackeeper and tried reinstalling it. still same issue.
I have following machine
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B0E
SMC Version (system):          1.69f1
Serial Number (system):          C02F94ETDMGG
Hardware UUID:          132AE53D-0766-5E17-9F54-ED935D6F7AB3
Sudden Motion Sensor:
State:          Enabled
Chipset Model:          AMD Radeon HD 6750M
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x8
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x6741
Revision ID:          0x0000
ROM Revision:          113-C0170L-521
gMux Version:          1.9.23
EFI Driver Version:          01.00.521
Displays:
Color LCD:
Resolution:          1680 x 1050
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
VX2245wm:
Resolution:          1680 x 1050 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          QD0064002266
Mirror:          Off
Online:          Yes
Rotation:          Supported
Adapter Type:          Apple Mini DisplayPort To VGA Adapter
Adapter Firmware Version:          1.03
Display Connector:
Status:          No Display Connected

HAve you tried disconnecting the external monitor rebooting and then runnig Aperture?

Mid 2007 iMac video card does not meet minimum requirements for latest iMovie update

Tried updating to the latest version of iMovie and I get the following message. "Your computer's video card does not meet the minimum system requirements." I haven't had any luck finding what those requirements are. What are the minimum requirements?
Thanks.

I'm having the same issue here too. I'm using a mid 2007 iMac 2.4 GHz Intel Core 2 Duo with 4GB of SDRAM and ATI Radeon HD 2600 Pro 256 MB.
What bugs me is that the update shows up but you are not allowed to install it. Either one of two things needs to happen.
#1 apple allows users to hide the update but still let you know that there is a hardware incompatibality
#2 don't let the update show up at all

System does not meet minimum requirements - Apeture Checker indicates ok

When loading Apeture I got the message that my system does not meet the minimum configuration. Running the Apeture Checker I get the message that my system is fine.
What gives, what do I do?
I have tried this on my G5, 1.8 GHz, 2.5 GB Ram, 20" Apple display.
Larry in SC

throw away the prefs files for both aperture and the checker and try again. that may help.
cheers,
k.

Sp54471 - Does not meet minimum requirements (Trying to get switchable graphics back)

I accidentally lost my switchable graphics by trying to update using drivers directly from AMD. I do not have the HP restore manager anymore. I tried downloading sp54471.exe from HP, but whenever I try to install it, it says I do not meet the minimum requirements. I have tried useing the Support Assistant tool as well, but it also gives the same error. When trying to just use the tool to find updates, it does not include anything for the graphics.

Hi: You need to use this driver... This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp55092.exe You will never be able to update the switchable graphics driver, so after you get things working again with this driver you will have to leave well enough alone.

Id does not start on SE Xperia Mino pro, ALTHOUGH android 2.1 , it says (device does not meet system requirements)

Was able to install,
but at startup says: the device does not meet minimum system requirements.
sony ericsson xepria x10 mini pro Model U20i
android 2.1 update 1
probabaly the screen is too small?
build 2.2.A.0.504

That device is not compatible with the main mobile Firefox version, but checking the system requirements you may be able to use the experimental ARMv6 nightly builds. For details see https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements

My computer does not meet the requirements for iTunes 7.7

Okay, so I think all these problems that I'm having are because my new computer does not meet the requirements for iTunes 7.7.
The requirements are listed here: http://www.apple.com/itunes/download/
I checked my system and I have:
1. 1.60 GHz instead of 2GHz
2. 511 MB RAM instead of 512 MB RAM
I have no idea how to check MB for video RAM or MHz. Since it's not shown in system I'm assuming that this computer doesn't have any.
The system requirements compared to mine are just off by a bit, but could this still be the problem?
Also, could I use an older version of iTunes that will work with my system & could you please post the link for the download.
Thanks in advance.

Hi,
Firstly, please let us know more details about the issue, such as:
1. What is your network environment, workgroup or domain?
2. How do you implement DirectAccess?
Meanwhile, regarding the requirements, please see
DirectAccess Requirements.
More information:
Networking and Access Technologies-
DirectAccess
Hope this helps.
Jeremy Wu
TechNet Community Support

Computer does not meet the requirements for DirectAccess

computer does not meet the requirements for DirectAccess

Hi,
Firstly, please let us know more details about the issue, such as:
1. What is your network environment, workgroup or domain?
2. How do you implement DirectAccess?
Meanwhile, regarding the requirements, please see
DirectAccess Requirements.
More information:
Networking and Access Technologies-
DirectAccess
Hope this helps.
Jeremy Wu
TechNet Community Support

Bios update failed : does not meet system requirements code 9994/9996

bios update failed : does not meet system requirements code 9994/9996 / Model ny801av-aba HP Pavilion p6100z cto Desktop windows vista basic current bios version 5.38, released 03/20/09. 4GB ram (3.5 useable) AMD semperon LE- 1300 socket am2+ code name sparta. M2N68-LA Motherboard BIOS update verision 5.49 released 08/24/09 (am trying to upgrade to a AMD phenom triple core 8400 2.1 gig that is why I am trying to update the bios, when I put it in I got nothing.)
This question was solved.
View Solution.

Figure 1: Error message
The error displays when ...
the update requires certain hardware or software that is not installed on your computer (examples: keyboard replaced with a non-HP keyboard or Microsoft .NET software is not installed),
the computer does not meet a certain minimum hardware or software requirement (examples: 4 GB minimum memory, 200 MB free disk space, or .NET version 2.0 required and 1.0 is installed) .
Usually, this error indicates the update is not needed for your computer and it should not be installed.

10.5.7 This volume does not meet the requirements for this update.

First, 10.5.7 is not showing up in software update. I downloaded both the delta and combo 10.5.7 updates and they both give me "This volume does not meet the requirements for this update." I've done all the requisite stuff, permissions, volume check, reset PRAM, etc. I've downloaded the updates several times, and they worked on my 2008 iMac and 2007 Macbook Pro, so I know they work. I've searched and searched and can't find a resolution. It's as if there is some signature written to my boot volume that is preventing this update. Applecare was of no help either. Any ideas?

Hi! Im new to this forum and i really dont know if this is the right place for me to say this but i really need some help! I have a MAc OS x 10.5.7 and had bootcamp installed on it so i could run both windows and mac! Over the last few days ive recieved a trojan virus on my windows... so i deleted my partition on mac so i basically just had Mac... now i am trying to reinstall my partition but disk utility is saying that i have an invalid volume free block count as it should be 41189365 instead of 41182017....argh! ive read the help stuff on it and it suggests me removing everything off my mac... but will i need 2 still have the mac install disc 1 to hand? as i have currently misplaced this and im ripping my hair out! Ive never had problems with my Imac until now and im really worried! I could really do with the help! Thanks Sam

Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
thanks

That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements. A common phenomena. If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App. That's one possibility for the error message appearing. If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview. You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
Hope this helps

Oracle 12c Environment does not meet minimum requirements

Similar Messages

Maybe you are looking for