Oracle 7.23 in a Netware SERVER
I am working in a NT 9.1 server using a XP workstation using ODBC. I must connect to another Oracle instance in a Netware server using version 7.23, simultaneously. If I install Oracle 7 client will I lose my actual configuration. How should I manage this ?
Thanks for any help.
Fernando
Step 1: Go to http://docs.oracle.com
Step 2: Download the installation document for your version.
10g is not a version it is a marketing label. 10.1.0.3 is not 10.2.0.4.
and you didn't think your operating system important enough to mention.
Step 3: Follow the installation steps in the document without deviation.
If you run into a problem ask a specific question and provide sufficient information so someone can help you rather than just giving you a generic answer (such as this).
Similar Messages
-
Oracle8 & Oracle 8i on same Netware Server
Can I install Oracle 8i on the same Netware server that currently holds Oracle 8 and only migrate 1 instance to Oracle 8i?
I have problems too.
No such files *.prd on CD. =( -
Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter
Hi
I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
i
The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
It is showing a blank screen after the prerequiste checks are complete.
Request you to help me out in resolving the issue.
Thanks in advance for your cooperation.Hi Helios
Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
The installation screen is greyed out with out any message or error.
Please could you share if you have any thoughts on this. -
Installation problem of Oracle 9iAS rel2 on redhat advanced server 2.1
Hi,
I am trying to install Oracle 9ias Rel2 on redhat advanced server 2.1
Following instructions i downloaded and installed the binutils patch binutils-2.11.90.0.8-13.i386.rpm
I have set ORACLE_HOME appropriately and created a new user oracle.
During installtion of 'J2EE and WebCache' , when it starts linking, the installer gives the following error
Error in invoking target ntcontab.o of makefile /home/oracle/Appserver/network/lib/ins_net_client.mk
Retry, Ignore,cancel...
If i press ignore, it gives series of such errors.
My ORACLE_HOME is /home/oracle/Appserver/
I am trying to set up the production environment.
Please help!!!
thanks
srinathCheck out Metalink Note:191567.1
(http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=191567.1)
Step 11.
11. Error in invoking target relink of makefile
/home/ias/infrastructure/precomp/lib/ins_precomp.mk
To fix it:
As ias go to $ORACLE_HOME/bin
vi genclntsh
change line LD_SELF_CONTAINED="-z defs" to LD_SELF_CONTAINED="" (line 147 of 200)
save genclntsh file
./genclntsh
Created /home/ias/infrastructure/lib/libclntst9.a
Click "Retry" at error popup window. Installer will continue.
Link successful. -
The Oracle MapViewer brings the WebLogic Managed Server to crash
Problem Description: The Oracle MapViewer brings the WebLogic Managed Server to crash, when we call a GetMap-Request with wrong Coordinates.
This was found out for the SRS=EPSG:25833. Example:
http://igdb-qm-svra1.blva.bayern.de:8080/mapviewer/wms?
REQUEST=getMap&
Version=1.1.1&
LAYERS=&
FORMAT=image/png&
TRANSPARENT=false&
STYLES=&
Datasource=igvert_alkis_wms&
basemap=AT_WMS_TN-KOMPLETT&
SRS=EPSG:25833&
BBOX=3.32358690717E7,5529425.0143,3.32369088846E7,5530464.8272&
WIDTH=500&
HEIGHT=500&
With the Enterprise Manager was also evaluated during and after a crash of Server the SQL-Statements.
If the SQL statements executed on the database itself, it takes a few seconds after a correct answer returns.
I know that have the look for the EPSG coordinate as follows:
BBOX=235869.071700,5529425.014300,236908.884600,5530464.827200&
My question therefore: Why are these coordinates by the Oracle MapViewer approved and not caught? An Request with incorrect
coordinates goes into a StuckThreads and then the ManagedServer crashed.
In the appendix you will find the evaluation of the Enterprise Manager.
I have tested the request with two different versions of Oracle MapViewer (Ver11_1_1_5_B110527 and Ver11_B100426). In both the same problem occurs on.
I have also filed an SR.
Best Regards
KerstinHi,
Can you confirm that you're trying to setup a managed server on another machine using the pack/unpack commands ?
You might to want to take a look at that post.
Clustering of 2 Physical server
Hope that helps !
Regards -
Error on clone database, oracle 10g release 2 for windows server 2008
Hi,
OS: Windows Server 2008 X64
Oracle: oracle 10g release r2 for windows server 2008
An error occurred when creating a database, stop at last step, Screenshot:
[http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
the trace log content:
[main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
[main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
[main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
[main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
[main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
[main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
[main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
[main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
[main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
[main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
[main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
[main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
[main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
[main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
[main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
[main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
[main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
[main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
[main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
[main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
[main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
[main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
[main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
[main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
[main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
[main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
[main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
[main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
[main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
[Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
[Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
[Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
[Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
[Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
[Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.oraCheck your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
ORA-28547 : Connection to server failed, probable Net8 admin error
thanks
http://swervedba.wordpress.com/ -
Can't uninstall or reinstall oracle 10g express edition in w/server 2003
Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
ThanksHi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM -
Can't uninstall or reinstall oracle 10g express edition in windows server 2
Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
ThanksHi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks -
SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
Hi,
I need to find out whether it's possible to install SAP R/3 4.6C
with Oracle 9.2 on a Windows 2003 - Server.
Is is only possible to install this sap-system with Oracle 8.1.7 on a Windows 2000-Server? Or are there some other ways?
If no, please tell me the possibilities for the correct installation of the desired sap-system.
Awaiting for your feedback.
Kind Regards->SAP R/3 4.6C with Oracle 9.2 on Windows 2003-Server
GreetZ, AH -
Oracle ODBC version error on windows server 2008 64 bit
We had installed oracle 10g standard edition on windows server 2008 64 bit. After one hour use of ODBC connection, we are getting a error message like 'Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed'
Find the link for error message. http://www.google.co.in/imgres?newwindow=1&biw=1600&bih=1075&tbm=isch&tbnid=zc1Vas4O9Eqj4M:&imgrefurl=http://social.tech…
Please give solution for the said issue. Thanks in advance.SAP said it is Oracle not support windows server 2008.
-
Oracle 10GR2 on Mac Os X Server
hi all
I tried to install oracle on MacOSX Server, everything went well (I think) but at the end when I try to run sqlplus I get:
-bash: //Users/oracle/oracle/product/10.2.0/db_1/bin/sqlplus: Bad CPU type in executable
can you help me plz
thanksBut no, we need to update your info, a version of oracle for mac intel exists,
on my macbook I have oracle 10gR2 installed, it works well,
the error I got when I tried to install oracle on MacOsX 10.5.7 Server
look here
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204macsoft_x86-64.html
http://blog.rayapps.com/2009/04/12/how-to-install-oracle-database-10g-on-mac-os-x-intel/ -
Oracle 10g database creation in windows2003 server
hi,
i need the step by step procedure to create oracle 10g database in windows 2003 server.
with regards
veluasifkabirdba wrote:
http://download.oracle.com/docs/cd/B19306_01/install.102/b15681/toc.htm
Asif,
IMO, the OP wanted to have steps given to him for the database creation , not the installation of the software.Not sure though since the wording chosen by him is not very clear.
@OP,
If you are looking for the database creation steps , the best would be to use DBCA! Other than that, you may want to look at the manual way of doing the same, given over here.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#i1017640
That said, if you were looking for the installation instructions, please look at the link given by Asif.
HTH
Aman.... -
9i's Oracle Universal Installer problem in W2K server! Please Help.
Hi all,
I am trying to install Oracle database 9i on my w2k server (domain controller). The Oracle Universal Installer quits right after I choose install in autorun menu with this message:
'Error in writing to directory C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall. Please ensure that this directory is writable and has at least 25 MB of Disk Space. Installation could not continue.'
I am installing as the administrator of the domain/server and I have 17GB left on my harddisk. I am using a P3 600 with 384 MB of RAM. My HD is Seagate ATAIV Baracuda and my motherboard uses VIA chipset.
Thanks in advance for your help.
Regards,
HartonoI am using Diamond TNT2 video card. I have tried to install new (not newest) detonator drive and VIA 4 in 1 driver ver4.29 but it still gives me the error. Would it help if I install Java2 runtime on this computer?
Regards,
Ari -
Differences oracle 8.0.6 between NT Server and Windows2000 Server
hello all,
today we have oracle 8.0.6 on NT Server ...
we need install the same release oracle 8.0.6 on new IBM server, with Windows 2000 Server ...
i´m looking information about differences between config oracle 8.0.6 in NT Server and Windows 2000 Server
thanks in advance
rodolfoHello.
If install Oracle8 into wk2, check nect
1. Apply SP3 or SP4 to WK"
2. Apply the las patch to Oracle8, this is 8.0.6.2.0
Now, I checked the RDBMS availability matrx on metalink and Oracle8 IS NOT SUPPORTED on WK2 plattforms
good lock
Mario -
Diff between Oracle 9i database and 9ias application server.
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.
Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.
Maybe you are looking for
-
I tried to reboot and worked for a while. but, if simple hybernate the ipad, once I enter again the keyboard doesnt work...so obliged to reboot and reboot every time i leave the ipad alone for few minutes. Of course a bag. any way to fix the bug?
-
Hello, I love the fact that I can move all my tool bars to other screens besides the main one, but does anyone know if I can move the actual design area (the main work area) to a separate screen? For example, I would like to have two HTML pages side
-
Hi, Please help, unable to read information of application in app store. Still can download but unable to read the application infor before downloading. I'm using iphone4, ios 6
-
Hi everybody!!! Does anybody knows if exist any user-exit or badi for aleaud idoc??? We receive an Idoc from PI and we sent an Aleaud Idoc to Pi as Ack and we need populatel some fields. Thanks a lot
-
Can't locate Adobe Media Encoder Vista (64bit)
I am having trouble locating AME in C:>Program Files (x86)>Adobe>Premiere Pro CS5. This is the trial version, Installed it about a week ago and had to reinstall because of a system restore I had to do. Last time I installed it, there was a sub fold