Oracle 7.3.4 on Sun Solaris 7

Help needed
Could anyone tell me whether Oracle 7.3.4, Oracle 8, Forms 6 and Forms 5 are available for Sun Solaris 7? Thanks

Oracle 7.3.4 i guess is not available on Solaris Intel but is avaliable on NCR-MP RAS
8.0.6
8i yes it is available
This is for intel.Sparc yes it should be available
forms 6.0 yes available on Intel Solaris
[email protected]

Similar Messages

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Is it Possible to install oracle 9i 32 bit on Sun Solaris Intel Edition

Dear OTN Members ,
It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
Sun Solaris Intel Editon 2.8 . Please inform me on
email :-
[email protected]
[email protected]
Thanking You
Piyush Patel
- Server name :- pi.com
- Filename
- Date/Time
- Browser + Version : Netscape 4.7
- O/S + Version : Sun Solaris Intel Edition 2.8

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

Can't download Oracle 9i Database Server for SUN Solaris 32 bit platform

I was not able to download Oracle 9.2.0 DB Server for Sun Solaris 32 bit platform from OTN site this morning. Could someone please take a look at it?
Thanks,
Wen Davis

At this time, Oracle is offering only the 64- bit and we do not
have additional information if in the future 32-bit will be
offered.
Best Regards,
OTN Team

Oracle 9i and IDS under sun solaris 8

Need some help on oracle 9i and IDS under sun OS
i want some clariffication in my project.
If i develop my application under "sun solaris 8" OS for x86 with "oracle 9i"
as the backend and "IDS" (internet developer suite) as the front end, Can my
application be ported to the other environment i.e "SUNFIRE 280R" as the
server with sun solaris 8 as the OS and the same DB and front-end ?.
will there be any porting problems ?.
i am new to this environment.And i don't have SUNFIRE 280R server with me and
the customer won't supply it.
can anybody guide me please ?.(i am looking for the suggestions form those who
really worked on this environment.)
Murthy

Andrea...for a faster response, please post this question in the Database - Installation forum:
Database Installation

Forte M2 and Oracle 8.1.6 on Sun Solaris 2.5.1

Anybody out there running Forte M2 with Oracle version 8.1.6?? The best
would be on a Sun Solaris 2.5.1 machine.
Our Oracle dba wants to upgrade for another application but Forte's
certification matrix only goes up to Oracle 8.0.3
Any experiences with version M and Oracle 8.1 would be helpful.
Jerry Fatcheric
Verizon (Formerly Bell Atlantic Mobile)

did this problem ever get solved. My problem seems similar, but, I get the "value not allowed" with the "end-of-file on communication channel" errors

Installation of Oracle 9.0.1 on Sun Solaris 5.8

Hi,
I am trying to install Oracle9i Enterprise Edition (9.0.1) on Sun Solaris.
I started the installer and the installation proceeded fine. When the installer asked for the second CD, I aborted the installation as the second cd was not available to me at that time.
After obtaining all the 3 installation CDs, I started the installer once again and the installation GUI does not show up. This is what I get
$ ./runInstaller
$ Initializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait..
This ".... Please wait..." prompt remains for ever.
Could somebody please give a pointer on what needs to be done to get the GUI running?
TIA,
Babu

Hi harsh
I'm no guru of Linux,
but heard somewhere u just cant make 9i to work with 128 MB RAM it needs at least 512.
u can refer a document
http://www.puschitz.com/OracleOnLinux.shtml
bye
Good Luck
Shalini

Sun Solaris 10,Upgrade 8 or higher,having issues with VxFS,for Oracle 11gr2

A while ago, we tried doing a prototype upgrade of our main Oracle 10g db to Oracle 11gr2.
The OS on which our Oracle 10g is running is Sun Solaris 10, upgrade 4.
According to Oracle 11gr2 documentation, we need Sun Solaris 10, upgrade 6 or higher for Oracle 11g2.
The filesystem we are using is VxFS, Veritas File System.
According to our system administrator, we had issues , making Sun Solar 10, upgrade 8 , work with the VxFS filesystem.
I was wondering if anybody is running Oracle 11g2 on Sun Solaris 10 upgrade 6 or higher with VxFS file system.
At present, our Oracle db upgrade project is on a hold, because of the above issue. So your help on this , can really help us in figuring out if there is an issue between VxFS filesystem and Sun Solaris 10 OS.
Thanks
Ashish

Hi Ashish,
We are not running Veritas Cluster file system.
We tried moving our Oracle 10g r2 db on ZFS ,before doing the upgrade and performance on ZFS was worst.
ZFS has certain memory parameter setting. If you did not configure that then ZFS will eat your complete system memory.
My system administrator, has gotten a copy of Solaris 10 upgrade 9 and will try that with VxFS.
I was curious to find out if folks are running Oracle 11g on Sun Solaris 10 with VxFS file system and if they had experienced any issue.If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Recently i installed Oracle database 11.2.0.2 on one of my test server. I have created two databases - one on ZFS and another on ASM.
Refer:
http://appsdbaworkshop.blogspot.com/2010/10/installation-of-11202-on-oracle-solaris.html
We dont have any performance issues. We are testing it for the performance benchmarks on both of the filesystem.
If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Regards,
X A H E E R

(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7

제품 : ORACLE SERVER
작성날짜 : 2003-06-02
(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7
====================================================================
PURPOSE
이 자료는 O/S startup 시에 Oracle RDBMS 서비스를 자동으로 startup하
는 방법에 대한 자료이다.
Explanation
sun solaris 부팅 시 oracle DB를 auto startup하도록 하는 데 관련된 화일들이다.
/etc/inittab : o/s의 초기화 과정을 조절하는 화일
/etc/rc2 : 부팅 run-level 2 에서 사용되는 스크립트
/etc/rc0 : 부팅 run-level 0 에서 사용되는 스크립트
/etc/rc2.d/S99dbstart : /etc/init.d/dbstart 에 대한 symbolic link
/etc/rc0.d/K01dbshut : /etc/init.d/dbshut 에 대한 symbolic link
/var/opt/oracle/oratab : 시스템에 설치된 오라클 인스턴스에 대한 정보.
(참고)
/etc/init.d/dbstart, dbshut 화일은 super user(root)로 생성하시고,
symbolic link도 super user로 만드시기 바랍니다.
이 화일들은 super user가 owner가 되도록 하고, super user(root)만이
실행 가능하도록 해야 합니다.
1. 먼저 vi /etc/inittab 화일을 열어보십시오.
ap::sysinit:/sbin/autopush -f /etc/iu.ap
fs::sysinit:/sbin/rcS >/dev/console 2>&1 </dev/console
is:3:initdefault:
p3:s1234:powerfail:/usr/sbin/shutdown -y -i5 -g0 >/dev/console 2>&1
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
s1:1:wait:/usr/sbin/shutdown -y -iS -g0 >/dev/console 2>&1 </dev/console
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
s3:3:wait:/sbin/rc3 >/dev/console 2>&1 </dev/console
s5:5:wait:/sbin/rc5 >/dev/console 2>&1 </dev/console
s6:6:wait:/sbin/rc6 >/dev/console 2>&1 </dev/console
fw:0:wait:/sbin/uadmin 2 0 >/dev/console 2>&1 </dev/console
of:5:wait:/sbin/uadmin 2 6 >/dev/console 2>&1 </dev/console
rb:6:wait:/sbin/uadmin 2 1 >/dev/console 2>&1 </dev/console
sc:234:respawn:/usr/lib/saf/sac -t 300
co:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` console login: " -T
sun
-d /dev/console -l console -m ldterm,ttcompat
s1부터 s6까지 os file들에 대해 위와 같이 device redirection이 연결되어
있으면 됩니다.
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
위와 같이 설정하면 run-level 2일 경우 /sbin/rc2 스크립트가 실행된다.
/sbin/rc2 는 /etc/rc2.d 디렉토리에 들어있는 스크립트를 실행한다.
만약 스크립트가 S 로 시작하면 /sbin/rc2 는 이 스크립트에 startup 파라미
터를 부여하고 여기서 지정된 프로세스를 실행시킨다.
따라서 /etc/rc2.d/S99dbstart 화일을 사용하여 dbstart를 실행한다.
shutdown 과정도 거의 비슷하다. /etc/inittab 에 다음과 같은 라인을 보자.
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
이것은 /sbin/rc0 를 실행시키는데 /sbin/rc0 는 /etc/rc0.d 디렉토리에
들어있는 스크립트를 실행시킨다.
스크립트 이름이 K 로 시작하면 이것은 stop 파라미터를 갖고 실행되어서 이
스크립트에 지정된 프로세스를 정지시킨다.
따라서 /etc/rc0.d/K01dbshut 스크립트는 stop 파라미터를 갖고 실행되며
이 스크립트는 $ORACLE_HOME/bin/dbshut 스크립트를 실행시켜서 오라클을
shutdown 시킨다.
2. 그 다음에 vi /etc/rc2 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 2에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
set `/usr/bin/who -r`
if [ x$9 = "xS" -o x$9 = "x1" ]
then
echo 'The system is coming up. Please wait.'
BOOT=yes
3. 그 다음에 vi /etc/rc0 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 0에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
echo 'The system is coming down. Please wait.'
# make sure /usr is mounted before proceeding since init scripts
# and this shell depend on things on /usr file system
/sbin/mount /usr > /dev/null 2>&1
# The following segment is for historical purposes.
# There should be nothing in /etc/shutdown.d.
if [ -d /etc/shutdown.d ]
then
for f in /etc/shutdown.d/*
if [ -s $f ]
then
/sbin/sh ${f}
fi
fi
4. /etc/init.d/dbstart 와 /etc/init.d/dbshut 스크립트를 만들어야 합니다.
그 내용은 각각 다음과 같이 한 줄로 작성합니다.
/etc/init.d/dbstart 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
/etc/init.d/dbshut 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
5. /etc/rc2.d/S99dbstart 화일을 /etc/init.d/dbstart에 대한 link로 생성합니다.
ln -s /etc/init.d/dbstart /etc/rc2.d/S99dbstart
6. /etc/rc0.d/K01dbshut 화일을 /etc/init.d/dbshut에 대한 link로 생성합니다.
ln -s /etc/init.d/dbshut /etc/rc0.d/K01dbshut
7. /var/opt/oracle/oratab 화일을 엽니다.
oratab 화일은 일반 텍스트 화일로서 시스템에 설치된 오라클 인스턴스에 대한
정보를 가지고 있는데 보통 3개의 필드로 이루어져 있으며,
첫번재 필드는 ORACLE_SID, 두번째 필드는 ORACLE_HOME, 세번째 필드는 Y 또는
N으로 구성되어 있습니다. 해당 인스턴스를 auto startup 시키려면 세번째
필드가 반드시 Y로 세팅되어 있어야 합니다.
아래에 예를 참조하세요.
ORA805:/oracle4/ora8/app/oracle/product/8.0.5:Y
ORA815:/oracle4/ora8i/app/oracle/product/8.1.5:Y
(주)
만약, <$ORACLE_HOME>/bin/dbstart 수행에 오류가 있으면 기존의 dbstart 화
일을 다른 path에 rename하고, 아래 내용만 가지고 <$ORACLE_HOME>/bin/ 아래
에 dbstart 화일을 다음과 같이 만든다.
svrmgrl <<EOF
connect internal
startup
exit
EOF
Example
none
Reference Documents
none

Hi Frank,
This is a bug in 9.0.1. It is fixed in 9.2 and
backported to 9.0.1.2 (rdbms 9.0.1.2 patch). Note that you
need to specify the sdo_indx_dims=2 in the parameter clause.
As a workaround in 9.0.1.0 you could do:
(1) remove the z coordinate (as you mentioned),
(2) set the srid to null (instead of 8307) both in
the geometries as well as the index metadata,
(3) set geodetic=false in the create-index parameters.
Hope that helps,
Ravi.

Installing oracle 10g release 2 on spark solaris!! urgent help!

hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.

This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh

Installing Oracle 8.1.5 on Sun

Can anybody help me in installing Oracle 8.1.5 on Sun Solaries 2.8 for INTEL. I have the Oracle CD that comes with Solaries 2.8 software but everyime when I insert the CD, the system does'nt mount it.
K

hi,
Please confirm that your media(oracle 8.1) is for Intel Solaris or for Sun Sparc (RISC).
bye
[email protected]

Comaptibility of Discoverer with Sun Solaris(5.10) Operating system

Please tell me which version of Oracle Discoverer is compatible with Sun Solaris(5.10).
Thanks&Regards
Pooja

Cross-posted
Sun Solaris 5.10 - SSH 1.1.3-Not able to connect to server with ssh -Urgent
@O.P.
Don't do that.
In the future, pick the most appropriate forum and make your post.
Cross-posting is considered to be the same as rude spamming.
I'm not aware of any forum web-site-of-value that would encourage cross-posting in its etiquette guidelines.
... and as far as "Urgent" goes?
This web site is for the end-user community to gather and discuss various topics in general conversations. Your self-imposed time pressures are irrelevant. If you need actual technical support for something, then log a support case and pay for a speedy answer.
See the FAQ link at the top of the page.

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Need Oracle 8.1.5 for Sun SPARC Solaris

I need this version of Oracle to use a vendor package that was developed and certified on this platform. Does anyone know where I can download this from? I cannot find it anywhere in the Oracle site.

Oracle 8i Enterprise Edition Release 8.1.5.0.0 was in the sun solaris 8 distribution.

Oracle 7.3.4 on Sun Solaris 7

Similar Messages

Maybe you are looking for