Oracle 7 install fails with Windows XP SP3

After installing Windows SP3 on systems with XP Professional 32 bit, we cannot install Oracle 7.3.4, which is required for an older 16 bit program. Running the Oracle 7 setup.exe returns an error "setup.exe is not a valid Win32 application". The installer file is not corrupt, we can still run the setup successfully on any computers that still have XP Pro SP2 installed.
However, systems that had Oracle 7.3.4 installed prior to the Windows SP3 update will run the software OK; it is just new installations of Oracle 7.3.4 that fail.
I have tried running the install off of a CD, network drive, and copied the files to the local machine, all return the same error. I have tried different users all with Admin privileges. I tried installing with each compatibility mode checked, clean booting the machine, and updating Windows Installer. I always get the "setup.exe is not a valid Win32 application" error.
Any suggestions or info?
Thanks

Here is some updated information.
Systems that have been in service for a long time and updated from Windows XP Pro SP2 to SP3 will not run the Oracle 7 installer. All machines that still have SP2 will run the installer.
However, systems that we recently formatted and reinstalled Windows XP Pro with SP2, and then updated to SP3, will run the installer for Oracle 7 with SP3 already installed. This indicates that it is not SP3 that is the issue. It could be an update that was done in the past (Microsoft or another software vendor), or some different file that is on the other machines (same brand, models, and OS, just been in service without being formatted recently).
We also have Oracle 10g on all the systems, but the old CrisPlus program probably won't run with Oracle 10g, because we have to add "C:\ORAWIN\BIN" to the system Environmental Variables or we get a "Ora7win.dll" error when launching the CrisPlus program. An Oracle expert or programmer may know how to work around this issue, but I do not know how.
This does give us options to fix the Oracle 7 issue. Either rollback the SP3 update and then install CrisPlus prior to the installation of SP3, or format the systems and reinstall Windows XP Pro, Service Pack3, and Oracle 7.
Thanks for the input. If anyone thinks of an easier workaround please let me know.

Similar Messages

DTM install fails with Windows 7 and Oulook 2007

I installed a clean version of Windows 7 and preceeded to install applications. Installed Office pro 2007 with Outlook. Set up my msn mail account with POP (tried) and install recommended installing Live Connector for mail instead. Did that. Outlook syncs with MSN Live. All OK so far. Downloaded DTM 5.0.1. from BB. DTM connects to my 8830 ok and gets the PIN. Go to configure for first synchronization. Pick outlook from list, calender sync both ways, all items (tried future and date range too), and DTM congratulates me on successful configure. I immediately get a Microsoft Outlook Connector Error "No available message stores". Same for Tasks, Memo, and Address book. I've read this is a MAPI.dll problem and I should delete the file and run FIXMAPI. Can't do it. Mapi.dll is owned by Trusted installer and I dont want to mess with the ownership if I dont have to. If I do, is there a step by step procedure? Is there a batch file fix? The PC is a an ASUS 1000HE with 2Gb RAM, 320 Gb HD. I updated the BIOS to V1104 (latest for W7) Everything ran perfectly under XP Pro. I don't think win7 is going away. When is a version of DTM going to be available that runs under windows 7?

Spoke to MSN Tech support. DTM does NOT work with MSN Live connector.Had to delete LIVE connector account and data file. I had MSN help with setting up POP3 configuration.DTM now works as expected. Incoming server is: pop3.live.com and Outgoing is: smtp.live.com. I didn't know "live" was in the server address's and had not seen this info on other forums. Hope this helps.

Can i install oracle BI enterprise edition on windows xp sp3?

hi, i downloaded oracle BIEE 10.1.3.4 for windows x86, can i install it on windows xp sp3. must it be on a server operating system?
thanks

Read the "System Requirements and Supported Platforms" document:
http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm

DTM install fails with error 1935 on Windows 7

Trying to install DTM 600_b047 on a Windows 7 64-bit system. Install fails with
Error 1935 and HRESULT= 80073712. Have tried to run via Run As Administrator. It seems to get most of the way through before failing. (Without Run As Admin, it fails much earlier complaining about a cab file not found.)
Any ideas?

Hey adairlw,
Welcome to the BlackBerry Support Community Forums.
What security software is currently installed on the computer?
Also can I get you to re-name the install shield folder which is located under C:\Program files\common files. Once you re-name the folder, then try to install the software.
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

ProClarity 6.3 PAS install fails on Windows Server 2012

We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
Kevin

I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

Install failed with exit code 11?

Hi,
I am trying to deploy a language pack and set the override language to English-US which I have created 2 programs for in my package. When the first program runs I am getting an error in the execmgr.log that "Install failed with exit code 11" Any
ideas what this means? When I run this command manually on the machine it works fine:
"C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
I checked the dism.log as well but I don't see any errors. Both logs are below, any help or suggestions would be greatly appreciated TIA
<![LOG[Command line = "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab", Working Directory = C:\WINDOWS\ccmcache\4j\]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr"
context="" type="1" thread="4976" file="scriptexecution.cpp:352">
<![LOG[Running "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab" with 32bitLauncher]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr" context=""
type="1" thread="4976" file="scriptexecution.cpp:370">
<![LOG[Created Process for the passed command line]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="scriptexecution.cpp:513">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
CommandLine = "\"C:\\WINDOWS\\System32\\Dism.exe\" /online /add-package /packagepath:\"en-us\\lp.cab\"";
DateTime = "20150127130028.509000+000";
MachineName = "";
PackageName = "";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 4976;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\WINDOWS\\ccmcache\\4j\\";
]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:715">
<![LOG[Raised Program Started Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976"
file="executioncontext.cpp:459">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[MTC task with id {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}, changed state from 4 to 5]LOG]!><time="08:00:28.525+300" date="01-27-2015" component="execmgr" context="" type="1" thread="5904"
file="execreqmgr.cpp:6288">
<![LOG[Program exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="scriptexecution.cpp:676">
<![LOG[Looking for MIF file to get program status]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="executionstatus.cpp:282">
<![LOG[Script for Package:LIA002A0, Program: Install failed with exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="3" thread="2488" file="executionstatus.cpp:252">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127130028.650000+000";
ExitCode = "11";
MachineName = "";
PackageName = "LIA002A0";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 2488;
UserContext = "NT AUTHORITY\\SYSTEM";
]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="event.cpp:715">
<![LOG[Raised Program Error Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488"
file="executioncontext.cpp:572">
<![LOG[Execution is complete for program Install. The exit code is 11, the execution status is FailureNonRetry]LOG]!><time="08:00:28.665+300" date="01-27-2015" component="execmgr" context="" type="1"
thread="1956" file="execreqmgr.cpp:4165">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[MTC task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D} deleted successfully.]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9070">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
<![LOG[Deleting request for program Install. Failing parent program InstallEN]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="execreqmgr.cpp:8147">
<![LOG[Requesting MTC to delete task with id: ]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
015-01-27 08:00:28, Info                  DISM   DISM.EXE:
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2015-01-27 08:00:28, Info                  DISM   DISM.EXE:
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.3.9600, Running architecture=x86, Number of processors=4
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Dism.exe version: 6.3.9600.16384
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Executing command line: "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Loading Provider from location C:\WINDOWS\System32\Dism\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info                  DISM   DISM Provider Store: PID=5984 TID=4336 Connecting to the provider located at C:\WINDOWS\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2015-01-27 08:00:28, Info                  DISM   DISM.EXE:
2015-01-27 08:00:28, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2015-01-27 08:00:28, Info                  DISM   DISM.EXE:

Thanks, it seems as though it is not doing anything now. I just see that the policy has arrived in the log below but it is not installing it? The dism.log hasn't changed at all so it seems that it isn't even executing the command now? Am I missing something
else? I even tried re-advertising it though client center.
Command is now:
C:\WINDOWS\sysnative\Dism.exe /online /add-package /packagepath:"en-us\lp.cab"
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:52:28.943+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="5036" file="event.cpp:405">
<![LOG[Policy arrived for child program Install]LOG]!><time="09:12:48.440+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6867">
<![LOG[Policy arrived for parent package LIA002A0 program InstallEN]LOG]!><time="09:12:48.487+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6893">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="09:12:48.487+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:405">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "LIA20116";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127141248.502000+000";
MachineName = "";
ProcessID = 2012;
SiteCode = "";
ThreadID = 3528;
]LOG]!><time="09:12:48.502+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:715">
<![LOG[The user has logged off.]LOG]!><time="09:36:59.174+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4320" file="execreqmgr.cpp:5138">

SCVMM Installation Failed: vmmServer.msi failed with Windows Installer error 1603.

Error seen when attempting to install Microsoft System Center 2012 R2 Virtual Machine Manager
Installing D:\amd64\setup\msi\Server\vmmServer.msi failed with Windows Installer error 1603.
See C:\ProgramData\VMMLogs\vmmServer.log for more information. After resolving the problem, retry setup.
Searched the log file for 1603 errors -
CustomAction EnableWsmanCredSSP returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B8:20) [02:00:47:180]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (B8:20) [02:00:47:180]: Machine policy value 'DisableRollback' is 0
Action ended 2:00:47: EnableWsmanCredSSP. Return value 3.
SI (s) (B8:20) [02:00:47:228]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Server (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
I've tried disabling my Firewall and troubleshooting the Enable-WSManCredSSP command-let however nothing has worked and I'm quite stuck.
Any help would be appreciated.

I had the same problem in my environment.
Here are the steps how i did solve this issue
Since VMM 2012 R2 Requires ADK 8.1 and this requires SQL 2012 Express.
In order SQL Server 2012 to be installed successfully .Net Frame Work 3.5 feature on Windows Server has to be enabled first, in this case it is not not being installed by ADK Installation wizard as a result SQL service fails to start, which results on VMM
installation to fail.
Please try to enable .Net Frame Work 3.5 feature on Windows Server 2012 R2 before you install ADK 8.1

ACR 8.4 CC RC install fails with AAM message 'patch not applicable'

ACR 8.4 CC RC install fails with AAM message 'patch not applicable' - Running Photoshop CC on OSX 10.7.5
Anyone seen this or have any ideas for a fix?
I also have my legacy CS6 installed on the same Mac - tried installing ACR 8.4 CS6 RC and that fails with the same dialogue box from AAM
The DNG converter installs no issue.
Thx
Chris.

Do you have some other software, like Photoshop Elements 12 on your system that would generally also be compatible with ACR 8.4 final but isn’t compatible with the RC because the RC’s only for PS users?
I installed the RC the same day it was released on my computer that has PS-CS6 & PS-CC with Windows 7 and it worked ok, so the update generally works, but something isn’t on your systems.
Are you up-to-date with your PS-CC version, which seems to be 14.2.1:
http://blogs.adobe.com/crawlspace/2014/02/photoshop-cc-14-1-1-update-now-available.html
And is CS6 updated to 13.0.6?
http://www.adobe.com/support/downloads/product.jsp?product=39 <http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh> &platform=Macintosh

SCEP Install Failing with Error Code 8004FF83

Hello,
We are having an issue with the manual install of SCEP on some devices. So far we've only noticed this on devices with Windows XP, SP3. We first allow SCCM to automatically attempt to push the client and on those that do not succeed
we have been manually running SCEPInstall.exe. This is where we are getting the error
8004FF83. It happens at the end of the install. It appears that files and folders are being written to the device and services are even created. Then everything gets deleted and the
error message is thrown.
We have tried reboots, and even running SCEPInstall.exe with the uninstall switches, reboot, and then retry. Our SCCM environment is 2012 R2 so our SCEP client should be fully patched. One thing to note is that we have also had to repair or re-install the
SCCM client on some of these devices. That is always the first troubleshooting step regardless - getting the SCCM client healthy and making sure it is properly communicating with its management point. Anybody have any thoughts?
Thanks for your help.

Honestly, I would strongly recommend if you are concerned about endpoint protection that you stop troubleshooting these issues on Windows XP, and upgrade those devices to a newer operating system like Windows 8.1
Having a functioning antivirus is going to do you little good once support runs out for Windows XP, which is just a few weeks away

Cumulative Update 3 client update install failed with code 1642

We have SCCM 2012 R2 and recently updated to CU3
Existing client is version 5.00.7958.1000
Pushing update package created during CU3 update failing on some computers
I am trying to update some of laptops using CU3 x86 update and getting following errors
Script for Package:ABC00126, Program: Cumulative update 3 - x86 client update install failed with exit code 1642
I have reviewed many forms but couldn't find relevant.
Update works on about 70% on machines with same image but failed on rest with same 1642 error
Same issues occurs applying client on during TSequence on some of machines.
It is very inconsistent,
Any help would be greatly apprciated
Thanks
RJ
RJ09

I verified package does copied over in ccmcache folder.
Also try to run update package using pstools, got error same as Torsten mentioned.
Here are logs from client.
Checking content location C:\Windows\ccmcache\gt for use
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully selected content location C:\Windows\ccmcache\gt
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Executing program as a script execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Found executable file msiexec.exe with complete path C:\Windows\system32\msiexec.exe
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully prepared command line "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Command line = "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous, Working Directory = C:\Windows\ccmcache\gt\
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Created Process for the passed command line
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "ABC212D1";
ClientID = "GUID:f298da2e-dfd1-428e-8b3c-b03602f95719";
CommandLine = "\"C:\\Windows\\system32\\msiexec.exe\" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\\Windows\\TEMP\\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous";
DateTime = "20150114005604.541000+000";
MachineName = "DH-07";
PackageName = "ABC00126";
ProcessID = 3496;
ProgramName = "Cumulative update 3 - x86 client update install";
SiteCode = "abc";
ThreadID = 2588;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\gt\\";
execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Raised Program Started Event for Ad:ABC212D1, Package:ABC00126, Program: Cumulative update 3 - x86 client update install
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
MTC task with id {8EB498C5-71D5-4933-BA80-6EEB8E189F98}, changed state from 4 to 5
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Program exit code 1642 execmgr
13/01/2015 6:56:04 PM 2784 (0x0AE0)
Could some please review and advise..
Thanks
RJ09

I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

I keep getting an error message when installing iTunes with windows 8

See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2

How do I install itunes with Windows 7?

how do I install itunes with Windows 7? I always get a Windows Installer error or administrator error __

Have tried: download but do not install iTunes, then turn off virus protection and firewall, restart computer, login as admin, then run the iTunes insallation. After it installs, restart virus protection and firewall and logout and back in as standard user.
Windows leaves installers running or still resident which conflict with the iTunes installer.

Pc with windows xl/sp3 can't connect / acquire ip address from airport extreme; meanwhile, my macbook in connecting fine. We have a wpa2 personal password

My husband's Dell with Windows xl (sp3) can't get an ip address from our new airport extreme. Nor can my daughter's Windows 7 computer. There are no firewalls in place. Both computers worked with my old Airport, though it was sssslllllllowwww. My Macbook works fine and is super fast compared to the old airport. We are using a wpa2 personal password.
Anyone out there have a cure for this problem so we can hook up those sad pcs?
Thanks a lot.
Elizabeth

First, make sure that the new Airport is configured exactly the same as the old one. Hopefully you saved the configuration settings in a file and can look at them to be sure.
If the Windows PC's can't connect with the same password, it's possible that the PC's were using an older wifi protocol like 802.11a or b. The new Airport is backwards compatible but has to be setup that way check to see what versions of 802.11a the windows computers support and make sure that the wireless mode of the airport is setup to accomodate them.
Can the PC's get an IP address if they are connected to the AirPort using an ethernet cable? If they can, that would help naorrow things down to a wireless issue and not some other configuration problem.

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

While installing itunes with windows 7, i get error -the feature you are trying to us is on a network resource that is unavailable-

That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please....

Oracle 7 install fails with Windows XP SP3

Similar Messages

Maybe you are looking for