ORACLE 8.0.5 on SuSE 5.3 and 6.0 - Corrupt Block

I do some heavy loading (Designer 2000) and I do get similar
errors on 2 different computer with mirrored disks -different
systems - on each one. So I'd like to exclude hardware problems.
it's experimental - so I do not run archives -
Designer on W95 crashes quite often but this should never lead
to corrupted data blocks.
Linux was hanging too - and disk-cache might not have been
written to disk ????? could this be a reason ???
Corrupt block relative dba: 0x01003aa8 file=4. blocknum=15016.
Fractured block found during buffer read
Data in bad block - type:6. format:2. rdba:0x01003aa8
last change scn:0x0000.00014914 seq:0x3 flg:0x00
consistancy value in tail 0x496b0605
check value in block header: 0x0, check value not calculated
spare1:0x0, spare2:0x0, spare2:0x0
would be happy to get some feedback
null

Ferdinand Gassauer (guest) wrote:
: I do some heavy loading (Designer 2000) and I do get similar
: errors on 2 different computer with mirrored disks -different
: systems - on each one. So I'd like to exclude hardware
problems.
: it's experimental - so I do not run archives -
: Designer on W95 crashes quite often but this should never lead
: to corrupted data blocks.
: Linux was hanging too - and disk-cache might not have been
: written to disk ????? could this be a reason ???
: Corrupt block relative dba: 0x01003aa8 file=4. blocknum=15016.
: Fractured block found during buffer read
: Data in bad block - type:6. format:2. rdba:0x01003aa8
: last change scn:0x0000.00014914 seq:0x3 flg:0x00
: consistancy value in tail 0x496b0605
: check value in block header: 0x0, check value not calculated
: spare1:0x0, spare2:0x0, spare2:0x0
: would be happy to get some feedback
Please check first /var/log/messages for any linux errors. It is
likely that if linux crashes and cannot sync to disk that there
might be some corruption problems. For this reason lts of people
would like to see raw device support but apparently Linus is not
willing for some reason...
I assume some hardware relevant problems though
Marcus
null

Similar Messages

Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

Hi!
I am trying to compile the above packets but am running into massive problems.
PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
I am using GCC 2.7.2.3 with the bugfixes from SuSe.
Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
And PHP still wont compile. Any ideas would be welcome.
P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
thx
Uwe Schurig

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

SQL Loader (Oracle 8.1.5 on Suse 6.3) Internal Error

Hi all,
I try to insert data with SQL Loader on Linux (Suse 6.3) and get the following message:
SQL*Loader-704: Internal error: ulmtsyn: OCIStmtExecute (tabhp) [-1073747572]
ORA-00942: table or view does not exist
The control file and data file did work on another platform.
Please help me!
Thanks,
Thies Mauker

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

How to install Oracle 8.1.7 on Suse 9.3

hello,
i want to install oracle 8.1.7 on Suse 9.3
first of all i install orarun8i.rpm:
rpm -Uhv orarun8i.rpm
and there are my problems:
Updating etc/rc.config....
fillup: Exception in ../SRC/services.c, line 344 concerniong file not opened
mv: cannot stat etc/rc.config.new: No such file or directory Done.
insserv: Service inetd has to be enabled for service oracle
insserv: exiting now!
error: %post(orarun8i-1.1-0) scriptlet failed, exit status 1
how can i solve this problem? how can i install oracle on suse 9.3?
thanx
tomi
sorry for my english

Hi ,
I suggest you to have a check with otn.oracle.com where oracle is supported with this OS. If so there must be some installation docs available.
cheers,
kamalesh jk

Oracle 8.1.7 on SuSE 6.4

Can anyone recommend a procedure to install Oracle 8.1.7 on SuSE 6.4. It is for practice only so security is not an issue. My unix/linux is basic and I am new to Oracle. I am doing an Oracle dba subject at uni this semester and need access to 8i at home to reinforce it. System is running on AMD 400MHz with 192Mb ram and 400Mb swap space.
Regards,
Peter

just read installation prerequired and run
./runInstaller. See also on www.suse.com they give an orarun.rpm to finish install.
(to start/stop database on boot/shutdown).
I tryed RH,Mdk before and I had no problem to ran Oracle on a Pentium MMX 200 with 64 Mo ram :-) 256 Mo swap with suse 6.3 whithout any patches and database files on reiserfs ... but it's just for practice to.
Eric

Oracle 8.1.5 on SUSE Linux 7.2 - Is it worth it?

Hello-
I have been trying to install Oracle 8.1.5EE on SUSE 7.2 for
days now and the installation has been the worst I have
encountered in many a year! I am thinking about scapping this
whole thing and moving onto another RDMS. If and when I get
Oracle running on Linux will I be faced with these same
installtion problems in my day to day maintenence? For such a
well known company I sure thought they could come up with
something slicker than this!
Problems so far:
JRE - Too many to list.
OraInstaller:
1. Does not show any Networking options
2. Reports not enough space for a 4GB /u01
3. Even when I select to "not" to run dbassist it does anyways
Patch:
1. I had to dig through mounds of documentation to find this
patch was neccesary.
2. Reboot. ?
dbassist:
1. Unset NLS_LANG etc...
2. SIGFAULTS halfway thru process.
At this point I am ready to bag Oracle and go with PostgreSQL
Sincerely,
Davin Flatten

Look, nobody should be going to anything other than 901 on 7.2.
Do you like to waste your time? Fastcenter sells these systems,
they install without a flaw and they're rock solid. Why install
a version that's unsupported ?!?

Oracle 8.1.7 on Suse 7.3

I am installing Oracle 8.1.7 on Suse Linux 7.3. I am getting the error 'Error invoking target relink of make file /oracle/precomp/lib/ins_precomp.mk' at 65% of relinking. I tried with unsetting LD_SELF_CONTAINED as mentioned here and re-running genclntsh under $ORACLE_HOME/bin, but it gives a lot of systax errors and finally the message create library /oracle/lib/libclntst8.a The relinking error continues. Is there any other solution?

Hallo,
Can you send me the page 817_73.html ?
The link is not accessable !
Thanks
W. Ackva

Oracle 9i Release 2 on SUSE 10

Dear Sir,
It is stated that i have installed SUSE LINUX ENTERPRISE SERVER 10 with SP1 with oracle check box checked during SUSE installation.
Now i am trying to install Oracle 9i release 2 on that machine i have completed almost every prerequisit for Oracle 9i R2.
But when i start "./runinstaller" after sccessfully cross "WELCOME" screen, "FILE LOCATION" screen, "AVAILABLE PRODUCTS" screen when it comes on "INSTALLATION TYPES" screen i select ENTERPRISE EDITION it gives me error (with out any error no just with HELP RETRY CONTINUE AND CANCELLED BUTTONS) at Executing Pre-requisites i click on CONTINUE button and it went on nect screen of "DATABASE CONFIGURATION" screen i select General Purpose and click on next IT STUCK ON 85 % bar.
Kindly help me in this regard
Special thanks
Malik Adeel Imtiaz
Netsol Technologies LTD

hi
Kindly re-check the packages you have install while installation of SUSE linux
Recheck the pre-requites also ........for oracle ...
Cheers

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

Problem installing Oracle 9.2 on RedHat Linux 7.1 and 9.0

Hi everyone,
As the subject line says, I tried installing Oracle 9.2 on
RedHat Linux 7.1 and 9.0, strictly following instructions
written by Werner Puschitz
(http://www.puschitz.com/InstallingOracle9i.shtml). Both
attempts failed with identical symptoms:
- the installer asks for Disk 2
- after the disk is inserted, it hangs. It turns out that
kernel is writing messages similar to these in
/var/log/messages:
Jun 16 02:45:19 boston kernel: 16:00: rw=0, want=317696, limit=149920
Jun 16 02:45:19 boston kernel: attempt to access beyond end of device
Unless interrupted, this continues until the /tmp filesystem gets full.
Has anyone experienced this? I haven't been able to find
an explanation so far.
Any help would be much appreciated.
Regards,
Ljubomir Buturovic

Providing a thread-bare configuration of your machine on which you are trying to install Oracle on Linux (and mind you - which kernel/distro, coz that's important) would definitely help you elicit more responses to your messages.

Oracle 8.1.5 windows NT 32 BIT and we want to migrate to 10.2.0.1 on windo

We have Oracle 8.1.5 windows NT 32 BIT and we want to migrate to 10.2.0.1 on windows 2003 64-BIT
Please suggest me what is best way ...to go for export import or taking cold backup and migrate
Think twice because i m going for production
ANY UPDATES!!!!!!!!!
Message was edited by:
user531314

Depends on how big is your database.
For small database, doing a export and import is quick and dirty.
For larger database, I would suggest migrate the database. But this means a lot of work and test. This is what I would do if I am doing amigration:
1. Do a cold backup of your 815 database
2. On your new test box, try to install 815 and start your old database
3. Upgrade your database to 8174
4. Install 10gr2 on your new test box
5. Migrate your 8174 database to 10gr2.
6 Test a lot
7. Repeat steps 1-6 2-3 times
8. Document tthe process and your test results completely.
9. Repeat what you document on your production box.

Does Oracle have Extended Stored Procedure like SQL Server and Sybase?

Hi, i am new to Oracle. I want to know if...
Does Oracle have Extended Stored Procedure like SQL Server and Sybase?
If it does not have, then how can i call outside program written in C or JAVA from the Database stored procedure or trigger?

refer to this link on external procedures
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/manproc.htm#11064

Oracle BI Suite EE 10g R3: Create Reports and Dashboards Self Study CD

Hi All,
Has anyone used Oracle BI Suite EE 10g R3: Create Reports and Dashboards self study CD? Any comments...
Thanks,
RK

Havent used it, but I guess it will be the same as: http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/index.html
and that one is ok.. to learn some basis things!

Oracle intelligent agent executable has encountered a problem and needs to

Hi All,
I am getting the following message after commence of OS (windows XP) on my LAPTOP.
"Oracle Intelligent Agent Executable has Encountered a Problem and needs to close."
due to the above problem it takes time to be fit to start working. that is; when i start my laptop then it gets ready very shortly but just later on it is seen that my laptop gets to be hanged. it seems that some background process runs and during this time nothing can be done on my laptop (even REFRESH - F5 doesn't respond). then after some time the above message comes. this process seems to be very much annoying.
there is a small Oracle database (9i) in my laptop along with Oracle developer (10g).
Thanks in advance.

Hi Tapash,
You probably don't want/need that service to run anyway. So go to your control panel/Adminstrative Tools/Services
and set Start Type to Manual for Oracle<ORACLE_HOME_NAME>Agent service
[OIA Users Guide|http://lbdwww.epfl.ch/f/teaching/courses/oracle9i/em.920/a96676/toc.htm]
Regards
Peter

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
Can anyone share their experiences and how to with me?
Thank in advance.
Katherine

Hi Katherine,
yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
HTH
Borys

ORACLE 8.0.5 on SuSE 5.3 and 6.0 - Corrupt Block

Similar Messages

Maybe you are looking for