Oracle 8.1.5 can install on SPARC solaries 8?

I have a copy of oracle 8.1.5 for sparc solaries 8 , but my colleage told me there is not compatible with solaries 8 and oracle 8.1.5 , only oracle 8.1.7 can be install on solaries 8.
is it true?

Hi,
Check if the listener process has started or not.
Sometimes you will have to manually start the listener process.
Go to Oracle Home. Run lsnrctl from bin.
Now you may be able to connect.
Good Luck,
Raghuraman

Similar Messages

Permission Denied error on RAC Install Sun SPARC Solaris-NetApps

Our RAC Installation is failing when installing in silent mode the base install of Oracle RDBMS 10.2.0.1. During the process file emtgtctl is copied from node1 to node2. On node1 the file has the following permissions:
-rwsr-s--x (note the user group and set-id "s" is on).
Oracle user is performing the intsall and he is a member of oinstall.
We get the error:
"Permission Denied" and the install fails.
We try and do the copy manually as well and this fails also.
Any one ever run accross something like this?

is oinstall the primary group for that user ?

Oracle 8.1.6 on Sun Sparc Solaris 8

Any successful story of Oracle 8.1.6 runs on Sun Sparc Solaris 8?
The documentation of Oracle 8.1.6 mentions that it can run on Solaris 2.6 and 7. But how about Solaris 8?
Thanks.

Could you tell us how to do that????
We all met the ORA-01034 problem!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Wile E. Coyote:
Yes, that's no problem
I've installed 8.1.6 on several machines running Solaris 8 without any problem<HR></BLOCKQUOTE>
null

Installing isqlplus for Solaris 8/Oracle 9i

Does anyone know how I can install isqlplus for Solaris 8? It does not seem to be installed with the Oracle 9.0.1 Enterprise Ediition full installation.
Thanks.

Did you resolve this issue?

Oracle 8.1.5 can't install on PC Server with 2GB RAM

The Oracle Database Configration Assistant can't create a database instance.
I have tried on several servers include DELL PE6400, HP Netserver LH3000 and so on.
all failed . But when i change the ram size to 1GB or less, the installation
will success.

David Tamburin (guest) wrote:
: Does anyone have a successful installation of Oracle 8.1.5
: running on Red Hat 6.0? I have tried to install it but, I
can't
: get the installer to run. I get java errors when I run,
: runInstaller. I have installed jre1.1.6. Any help would be
: appreciated.
We have gotten it running on two RH6 machines. Took a little
extra work.
Briefly...
* Make sure you use the latest JRE, and try using the one
with native threads (if not you will have to hand edit the
netasst script and remove the -native flag)
* For some reason some of the libs that get installed are
zero length. Find the thread on this forum where someone posted
some sample code to recreate these. If I remember right its the
libjni library. It is a very short easy compile.
* Make sure you got lots of RAM (128 min) and double that in
swap
* Watch for binaries that get installed without the execute
bit set. For instance I think tnslsnr is one of them, as well as
SQLPlus. I can't remember exactly, but that's one other problem
to watch out for.
So far things here are working. I even tried a little java in a
stored procedure. My latest issue is trying to get the PROC
samples to compile.
-Scott
null

Please How i can install Oracle weblogic 10.3.5 on AIX

Please How i can install Oracle weblogic 10.3.5 on AIX

HI ,
First of all, you should read following link : Oracle WebLogic Platform 10.3 on IBM AIX 5.3 pSeries
Thank you

Can I install sparc solaris 11.2 (32 bit) OS on LDOM created in Sparc T4-1 server

Hi,
I want to create a LDOM on Sparc T4-1 server which has 11.2 sparc Solaris OS 64 bit installed in it.
1. I am unable to find and download sparc 32 bit image for 11.2 sparc solaris. Can anyone help?
2. Is this doable?

Solaris 11 is only available with 64-bit kernel.

Oracle 9i install failing on Solaris 10

Oracle 9i install on Solaris 10 fails at the Database creation stage with Ora error "Out of Memory"
I have a Ultra 10 with 1GB RAM, 2GB swap and lot of space in the filesystem where I am installing Oracle
The oracle release notes asks for increased value for shmmax, shmmni etc by editing /etc/system and according to Solaris 10, it is not required as kernel dynamically allocates those values. It looks like it is NOT. How can I verify?
rcladm talks about shmmax values only with projects. How can I verify that all my applications running on a this box has a higher SHMMAX values and not on per project basis.
In older versions, sysdef could tell us the current SHMMAX values. Is there any comparable commands in Solaris 10.
I am not that comfortable with the rcladm features. Can some one show some examples.
Is anyone successful in installing Oracle9i on Solaris 10. I heard Oracle patch set 9.2.0.5 and 9.2.0.6 is certified with Solaris 10. Does it mean the original version of 9.2 does not install on Solaris 10?

'Net Configuration Assistant is failing" from installation. I tried twice and got the same problem. I tried to run 'netca' from the command line and got the same problem - Java runtime problem. I tried to install patch and could not find Oracle patches for Solaris 10 and the patches are for Solaris 9.
Does anyone have suggestion?
$ ./netca
ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Compiled Code)
at oracle.net.ca.NetCA.<init>(Compiled Code)
at oracle.net.ca.NetCA.main(Compiled Code)

Oracle 8.1.6 autimatic startup/shutdown on sparc solaris 8

I tried to setup a script in /etc/init.d that should call dbstart to auto-start my DB when I boot my sparc solaris 8 server. I tried to run it in rc3 and then in rc2 to no avail. I'd like to know how to setup the server to automatically startup oracle on boot and automatically stop it on shutdown... Can anyone help please?

Could you tell us how to do that????
We all met the ORA-01034 problem!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Wile E. Coyote:
Yes, that's no problem
I've installed 8.1.6 on several machines running Solaris 8 without any problem<HR></BLOCKQUOTE>
null

EBS12 post install steps on sparc Solaris 10.

hi !
I have successfully installed EBS 12 on Sparc Solaris 10 . following the
document shown below .
I am now looking for the similar document that i followed on Linux to upgrade
the application version from 10.X to something , on solaris .
is there a post install document to follow for Solaris ?
Oracle® Applications
Installation Guide: Using Rapid Install
Release 12.1 (12.1.1)
Part No. E12842-02
thanks

1) Query AD_BUGS table to verify AutoConfig Patches -- Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 (Doc ID 387859.1)
2) You need to source the application env file before applying Patch 6400501 -- How to apply Patch 6400501 to a Release 12 APPS-Tier ORACLE_HOME ? (Doc ID 799907.1)
3) If you are planning to keep the same database port number, then you can ignore this step
You will need to install 11.2.0.3 ORACLE_HOME software and upgrade your database to this version.
Thanks,
Hussein

Installing 11gR2 Grid Infrastructure on SPARC Solaris 10

Please help! I am following the RACGuides_Rac11gR2OnSolaris.pdf to install 11gR2 Grid Infrastructure on SPARC Solaris 10 MU8.
bash-3.00# cat /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
1. I installed Oracle Solaris Studio 12.2, ignored 124861-15 per doc ID 969497.1.
Installation went well, but root.sh gave on node1...
CRS-2676: Start of 'ora.evmd' on 'sunt2k-02' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'sunt2k-02'
CRS-2676: Start of 'ora.asm' on 'sunt2k-02' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'sunt2k-02'
CRS-2676: Start of 'ora.DATA.dg' on 'sunt2k-02' succeeded
u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-02 ... failed
Configure Oracle Grid Infrastructure for a Cluster ... failed
2. Per doc ID 1053192.1, I rerun the following....
bash-3.00# /u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-02
PRKO-2421 : Network resource is already started on node(s): sunt2k-02
PRCR-1079 : Failed to start resource ora.sunt2k-02.vip
CRS-5005: IP Address: 10.112.0.150 is already in use in the network
CRS-2674: Start of 'ora.sunt2k-02.vip' on 'sunt2k-02' failed
CRS-2632: There are no more servers to try to place resource 'ora.sunt2k-02.vip' on that would satisfy its placement policy
PRKO-2422 : ONS is already started on node(s): sunt2k-02
PRKO-2423 : eONS is already started on node(s): sunt2k-02
same problem on node2....
CRS-2676: Start of 'ora.crsd' on 'sunt2k-03' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'sunt2k-03'
CRS-2676: Start of 'ora.evmd' on 'sunt2k-03' succeeded
/u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-03 ... failed
Configure Oracle Grid Infrastructure for a Cluster ... failed
3. Per doc ID 1053192.1, I rerun the following on node2.....
bash-3.00# /u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-03
PRKO-2421 : Network resource is already started on node(s): sunt2k-03
PRCR-1079 : Failed to start resource ora.sunt2k-03.vip
CRS-5005: IP Address: 10.112.0.152 is already in use in the network
CRS-2674: Start of 'ora.sunt2k-03.vip' on 'sunt2k-03' failed
CRS-5005: IP Address: 10.112.0.152 is already in use in the network
CRS-2674: Start of 'ora.sunt2k-03.vip' on 'sunt2k-02' failed
CRS-2632: There are no more servers to try to place resource 'ora.sunt2k-03.vip' on that would satisfy its placement policy
PRKO-2422 : ONS is already started on node(s): sunt2k-03
PRKO-2423 : eONS is already started on node(s): sunt2k-03
4. Now I got stuck here that can not bring up CRS....this is the last step from installing Grid Infrastructure.
bash-3.00# cat installActions2010-10-26_09-10-36PM.log
INFO: Checking user equivalence...
INFO: User equivalence check passed for user "grid"
INFO: ERROR:
INFO: CRS is not installed on any of the nodes
INFO: Verification cannot proceed
INFO: Post-check for cluster services setup was unsuccessful on all the nodes.
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Cluster Verification Utility
INFO: Oracle Cluster Verification Utility failed.
INFO: Oracle Cluster Verification Utility failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is /u01/11.2.0/grid/oui/bin/runConfig.sh ORACLE_HOME=/u01/11.2.0/grid MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing /u01/11.2.0/grid/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/11.2.0/grid/cfgtoollogs/configToolFailedCommands.bak.2
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
bash-3.00#
Any advise would be appreciated.
Thanks much in advance...
R-

Hi,
it looks like the VIPs you used are already taken in your network or the name resolution on the VIP name does not return the correct IP address for the VIP, hence the problems.
Sebastian

Oracle 10g express edition can support forms 6i & reports

I have installed oracle 10g express edition and installed forms 6i. while connecting forms 6i into ora 10g express edition it is not connecting in windown xp platform.
It is showing only "dont send error". I want to know oracle 10g express edition can support forms & reports.
Please give me solution.
Thanks
Govindarajan

this is from metalink :(https://metalink.oracle.com/metalink/plsql/f?p=140:1:8190633972492825) for windows 2003
Application Tier Certifications
OS      Product      Server      Status      Addtl.      Info.      Components      Other      Issues
2003      6.0.8.26.0 Patch 17      9.2      Desupported      Yes      Yes      N/A      N/A
2003      6.0.8.26.0 Patch 17      10g      Desupported      Yes      Yes      N/A      N/ASeems you are right, but if you filter only certified version result is NONE!
And anther link is prooving that:
https://metalink.oracle.com/metalink/plsql/f?p=200:27:8190633972492825::::p27_id,p27_show_header,p27_show_help:609971.992,1,1
Nice start to read is:
http://www.oracle.com/technology/products/forms/htdocs/FormsSOD.html

Oracle Forms Fundementals Study CD installed but wont open!

Oracle Forms Fundementals Study CD installed but wont open! When I click on icon nothing happens! Anybody have any advice?

Sorry guys,was doing some more testing and there have been some new developments.
First, my database is version 10.2.0.4
secondly, on all client machines they have installed Oracle Forms 5.0.6.8.0
Interestingly, i can now open the form by connecting to the 10g database.
But when i try and query for data , run a report and things like that, am getting
the below error.
REP-0501: Unable to connect to the specified database
ORA-12637: TNS: Packet recieved failed

How to check if Oracle Data Access Components is installed?

How to check if Oracle Data Access Components is installed and version on my computer?
Also How to check if Oracle Data Provider is installed and version?
TIA
Steve42

Regedit HKLM->Software->Oracle. See what's there...
At the very least, that can give you paths and can check file versions from there.

How to determine which of the Oracle security products have been installed

Hello!
I would like to determine whether or not the Oracle security products have been installed for an Oracle database.
The Oracle security products are:
* Oracle Database Vault
* Oracle Audit Vault
* Oracle Configuration Management
* Oracle Total Recall
* Oracle Advanced Security
* Oracle Data Masking
* Oracle Label Security
* Oracle Secure Backup
* Oracle Database Firewall
So what I thought is to look at the "DBA_REGISTRY" table which displays information about the components loaded into the database.
But on the other hand there also is the "V$OPTION" view which lists database options and features.
Does anybody know, how I could correctly determine whether or not each of the product is installed?
I guess for "Oracle Database Vault" I should query V$OPTION, but what should I do with the other ones? And in case DBA_REGISTRY would be the right table, how would the comp_ids look like for the products?
SELECT 'Oracle Database Vault' , nvl( (SELECT VALUE FROM V$OPTION WHERE PARAMETER = 'Oracle Database Vault'),'FALSE') FROM sys.dual
OR
SELECT 'Oracle Database Vault' , nvl2( (SELECT 'valueFound' FROM DBA_REGISTRY WHERE comp_id = '??????' AND status NOT IN ('INVALID', 'REMOVING' , 'REMOVED')),'TRUE','FALSE') FROM sys.dual
Thanks in advance
Kai

Hi kai;
There are some script avaliable on net, first please check them and run it on test server first!
http://www.google.com.tr/#hl=tr&biw=1259&bih=793&q=installed%2Bproducts%2Boracle&aq=f&aqi=&aql=&oq=&gs_rfai=&fp=71a534c4a5161590
Secondly you can check oraInventory and also oratab file or you can run runInstaller and can check Installed product tab on installation screen
Regard
Helios

Oracle 8.1.5 can install on SPARC solaries 8?

Similar Messages

Maybe you are looking for