Oracle 8.1.5 install on Linux Redhat 6.0: character set (and other) problem(s)

I am trying to install Oracle 8i on Linux and it does not work : once the install is finished, I have a message saying that "Character Set not found".
I am runing a french version of Linux (fr-latin 1) and I try to install Oracle with French and English as languages
An other problem about this install : Oracle does not seem to recognize that I have 6,9 Giga for it to install, and says that I have not enough space for the install...
And at the end of the install, it takes for ages (about 15mns) during which nothing seems to happen. On one machine I got out of this phase, but on the other I never saw it finish, it looks as if the computer crashed. Is that normal?
I went through all the initialization phases, set the correct environment variables...
thanks
Solange
null

I've been dealing with the same problems in the english version but could bypass thiss by doing the folowing.
-Just ignore the disk space stuff
-Ignore the charset message, also
-When creating a database, choose custom and then select the WE8ISO8859P1 char set. It worked for portuguese, must work for french also.
-Everyone here recommended, and I do the same, leave the database creation for later, not during instalation.
Good Luck!

Similar Messages

Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform?

Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank

9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM

I have a new iMac. Can I install my iWork from my Snow Leopard set and upgrade it, or will I need to buy new iWork?

I have a new iMac. Can I install my iWork from my Snow Leopard set and upgrade it or will I need to buy new iWork? If so why?

cherylfrommiami wrote:
I paid for the cd set when my last computer needed an upgrade. I just want to use iWork on my new computer OSX10.8
As Niel states you can use your current iWorks.
If you want the latest version you will need to purchase the componets in the Mac App Store.

[urgent] oracle character set and national character set !!(dictionary)

Hi. everyone.
What is the oracle dictionary that contains information of
oracle character set and national character set?
I checked v$database, but there was not the information.
It seems that there are some differences between "nls_* " init parameters
and the database character set.
"Alter database backup controlfile to trace" gave me the character set of db,
but I would like to know whether there are oracle dictionary regarding them.
Thanks in advance. Have a nice day.
Best Regards.

I found the dictionary which contains the information of character set and
natiional character set of database.
select * from nls_database_parameters
where parameter like '%CHARACTERSET';
Thanks for reading.
Have a good day.
Best Regards.

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it?

After installing Flash Player, I lost sound on Youtube and other sites. How do I fix it? I still have sound on some apps.

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
Thanks,
Chris

I cant start netasst after I installed oracle-8.1.7.01 for linux(redhat 7.2))

I can run netca normal
I found some problem in the last two rows of th netasst,who can help me.
below is th netasst scripts in my machine:
#!/bin/sh
# $Header: netasst.sbs 10-jul-00.14:40:53 mclose Exp $
# Copyright (c) Oracle Corporation 1997, 1998, 1999, 2000. All Rights Reserved.
# NAME
# netasst - Shell script to run Net Assistant
# DESCRIPTION
# Runs the Net Assistant Java Application. This file comes in two
# forms its original, with a .sbs extension, and its final, without
# a .sbs extension. The .sbs version is source for the final
# version which the Oracle Universal Installer creates by
# doing variable substitution at install time.
# MODIFIED (MM/DD/YY)
# mclose 07/10/00 - Change location of ewtcompat
# mclose 11/19/99 - Update to ewtcompat 3.3.6
# mclose 10/13/99 - 816 install variable changes
# mclose 09/22/99 - Remove JRE -native flag (990089)
# mclose 09/17/99 - add nls message jar
# rgiardin 07/22/99 - update dependency versions
# rgiardin 07/14/99 - remove extraneous header info.
# rgiardin 07/14/99 - add config jar dependency
# mclose 06/24/99 - fixed bug 882986
# mclose 01/14/99 - Update to ewt 3.1.10.
# mclose 12/30/98 - Add check for DISPLAY
# rgiardin 12/16/98 - stop changing to %TOOLS dir before running asst
# rgiardin 12/07/98 - update ewt version to 3_1_9
# rgiardin 11/20/98 - update ewt ver to 3.1.8.1
# rgiardin 11/18/98 - update ewt version to 318 and remove reference to e
# mclose 11/13/98 - Change substitution variable names
# rgiardin 11/11/98 - add ewtcompat variable for sed replacement
# mclose 11/03/98 - Change for sbs to shell script processing
# mclose 10/28/98 - added missing HotJavaBean.jar
# mclose 09/02/98 - Update for 8.1.4
# mclose 07/01/98 - Set 8.1.3 location for maf,ewtcompat,ewtdev
# mclose 06/04/98 - add $ORACLE_HOME/lib to LD_LIBRARY_PATH
# mclose 06/04/98 - Fix possible classpath problem
# mclose 06/02/98 - fix Net Assistant schell script for 8.1
# skanjila 10/15/97 - Append current LD_LIBRARY_PATH
# skanjila 06/05/97 - Add i18n.jar in classpath
# skanjila 05/28/97 - Creation
case $ORACLE_HOME in
"") echo "****ORACLE_HOME environment variable not set!"
echo " ORACLE_HOME should be set to the main"
echo " directory that contains Oracle products."
echo " Set and export ORACLE_HOME, then re-run."
exit 1;;
esac
case $DISPLAY in
"") echo "****DISPLAY environment variable not set!"
echo " Net8 Assistant is a GUI tool which"
echo " requires that DISPLAY specify a location"
echo " where GUI tools can display."
echo " Set and export DISPLAY, then re-run."
exit 1;;
esac
# Unset any existing JAVA_HOME variable to ensure that only
# the JRE we want to use is used.
unset JAVA_HOME
# External Directory Variables set by the Installer
JREDIR=/usr/app/oracle/product/8.1.7.0/JRE
JLIBDIR=/usr/app/oracle/product/8.1.7.0/jlib
# External File Variables set by the Installer
SHAREJAR=$JLIBDIR/share-1_0_8.jar
SWINGJAR=$JLIBDIR/swingall-1_1_1.jar
EWTJAR=$JLIBDIR/ewt-3_3_6.jar
EWTOTHER=$JLIBDIR/ewtcompat-opt-3_3_6.zip
HELPJAR=$JLIBDIR/help-3_1_8.jar:$JLIBDIR/ice-4_06_6.jar
NETCFGJAR=$JLIBDIR/netcfg.jar
MAFJAR=$ORACLE_HOME/network/jlib/sysmanmaf.jar
# Net Assistant Directory Variables
NETJLIBDIR=$ORACLE_HOME/network/jlib
NETTOOLSDIR=$ORACLE_HOME/network/tools
# Net Assistant File Variables
NETASSTJAR=$NETJLIBDIR/netasstm.jar:$NETJLIBDIR/netasst.jar
# JRE Executable and Class File Variables
JRE=$JREDIR/bin/jre
JREJAR=$JREDIR/lib/rt.jar:$JREDIR/lib/i18n.jar
# Set Classpath for Net Assistant
CLASSPATH=$NETASSTJAR:$MAFJAR:$EWTJAR:$HELPJAR:$SHAREJAR:$JREJAR:$EWTOTHER:$NETCFGJAR:$SWINGJAR:$NETTOOLSDIR
# Set the shared library path for JNI shared libraries
# A few platforms use an environment variable other than LD_LIBRARY_PATH
SET_DEFAULT=YES
PLATFORM=`uname`
case $PLATFORM in "HP-UX")
SET_DEFAULT=NO
SHLIB_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/network/lib:$SHLIB_PATH
export SHLIB_PATH
esac
case $SET_DEFAULT in "YES")
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/network/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
esac
# Run Net Assistant
$JRE -classpath $CLASSPATH oracle.net.asst.container.NetApplication oracle.net.asst.container.NetApplication
exit $status

I don't understand:
My spatial data does not use projection (the SRIDs are 262148).
What is 262148? It is an SRID that isn't in the 8.1.7.4 database.
If the SRID isn't an issue, you might want to make sure the coordinate
system bounds of the geometries match if your data is coming from two
different tables and they both have quadtree indexes built on them.
If the coordinate system bounds don't match, then you can see this kind of problem.
Hope this helps,
Dan

Oracle Database Character set and DRM

Hi,
I see the below context in the Hyperion EPM Installation document.
We need to install only Hyperion DRM and not the entire Hyperion product suite, Do we really have to create the database in one of the uft-8 character set?
Why it is saying that we must create the database this way?
Any help is appreciated.
Oracle Database Creation Considerations:
The database must be created using Unicode Transformation Format UTF-8 encoding
(character set). Oracle supports the following character sets with UTF-8 encoding:
l AL32UTF8 (UTF-8 encoding for ASCII platforms)
l UTF8 (backward-compatible encoding for Oracle)
l UTFE (UTF-8 encoding for EBCDIC platforms)
Note: The UTF-8 character set must be applied to the client and to the Oracle database.
Edited by: 851266 on Apr 11, 2011 12:01 AM

Srini,
Thanks for your reply.
I would assume that the ConvertToClob function would understand the byte order mark for UTF-8 in the blob and not include any parts of it in the clob. The byte order mark for UTF-8 consists of the byte sequence EF BB BF. The last byte BF corresponds to the upside down question mark '¿' in ISO-8859-1. Too me, it seems as if ConvertToClob is not converting correctly.
Am I missing something?
BTW, the database version is 10.2.0.3 on Solaris 10 x86_64
Kind Regards,
Eyðun
Edited by: Eyðun E. Jacobsen on Apr 24, 2009 8:26 PM

No Battery Charge and Other Problems After OS3 Install - Solution?

This relates ONLY to iPhone Users using the "PUSH" Function for Email or Other Apps!
PROBLEM: It seems as though Apple is at least aware of the problem(s), i.e. once Exchange Email or another App using PUSH is configured, there is an OS3 bug that seems to be hardware independent (impacting ALL 1G, 2G and GS iPhones, but not consistently).
SYMPTOMS: Include some or all of the following . . . rapid discharge (less than two hours from a fully charged phone, failure to charge (by AC adapter or USB to computer), failure to charge completely, perpetual dead battery icon, inability to boot, inability to automatically sleep, quite warm on upper back side, slow email, indication of a full or partially full charge dropping to no charge or dead when removed from charging source.
CAUSE: OS3 Bug prevents consistent charging, draining the battery even when plugged in to a computer via the USB or into an A/C adapter (although I've been able to intermittently charge on an A/C adapter). In push mode, the Exchange email client on the iPhone continually queries the Exchange Server, cycling the iPhone CPU and continually draining the battery at a high rate (can
WHAT I'VE BEEN TOLD BY APPLE:
1) Defective Hardware (though I'm on my third 3G in a week, so I don't think hardware is the problem . . . Apple will consider replacement with a new 3G if my third 3G has the same problem)
2) Corrupted App in iTunes - so I manually reloaded each app directly over wi-fi, one app at a time, this worked until I configured Exchange Email, at which time symptoms immediately appeared . . . so corrupted app unlikely.
3) Initial data transfer after email configuration . . . but symptoms continued long after this.
4) Wi-Fi - but turning wi-fi on or off had little effect, beyond normal.
5) Restore to New Phone - this works fine UNTIL Exchange Email is configured and activated. Thus, the time consuming practice of reload all apps, photos, music, etc. will be for naught, once exchange email is turned on with "push"
SOLUTION: Turning off "push" on your exchange email account
1) Go to Settings - Mail, Contacts, Calendars - Fetch New Data
2) Set Fetch Setting to 15 minutes to approximate the much more frequent "push" uploads and downloads. NOTE: Turning off \"push\" at this level will NOT turn off push on your exchange email account and the problem will not be resolved
3) Scroll down and select - Advanced -
4) Identify and select your Exchange Server account
5) Select - Fetch -
6) Leave settings
Phone should cool down in a few minutes and work normally. The problem can be replicated and resolved repeatedly merely by toggling "push" on and off in your exchange email configuration.
I was told that this is likely to be the "fix" until a patch is issued. No time frame was given for an actual fix that allows Exchange users to use push technology. Disappointing, since broader use of "push" technology beyond exchange was one of the big benefits of OS 3.0.
NOTE: THIS PROBLEM DOES NOT OCCUR ON ALL iPHONES WITH OS3 USING THE EXCHANGE CLIENT. I have second 3G phone, identically configured (including push to exchange email) that has no symptoms at all. Go figure.

Since two days ago, my battery indicator has been indicating 100% until the phone dies, which seems to be one of the symptoms you're describing.
However, I don't use Push emails; my email client is configured to poll an imap server and has been that way since I got my phone over 6 months ago. To be on the safe side, I turned off Push anyway, but I'm still having the problem. Definitely 3.0 related as I've never had this problem before.
Perhaps it's linked to an app? Personally I don't have a whole lot of them installed: Aurora Feint, fstream, twitterific, flixster, wikipanion, google earth, urbanspoon, STM Mobile, iDicto, Air Sharing, Facebook and Apple Remote. I've removed a few and will see how it goes.

Install Oracle 8i 8.1.7 on Linux Redhat 7.1

Hi,
I am installing Oracle 8.1.7 on AMD-K6 CPU running Linux 7.1.
But almost the end of installation, I get the following error:
Error in invoking target install of makefile /opt/oracle/product/8.1.7/ctx/ins_ctx.mk
Anybody know what caused this error and how to resolve it??. Thanks.
regards,
Benny

Benny,
cd to the .../ctx/lib directory and check the ORACLE_HOME at the type of that file. Fix the path in the file or make sure that it's set propertly in the env of that shell.
Type make -f ins_ctx.mk
Linking should complete w/out error messages in shell, then tell Oracle Installer to ignore.
This worked for me on RH 7.2, see http://www.alsutton.com/oracle_install.html for more details, or reference the text below.
An error may occur towards the end of the install on ${ORACLE_HOME}/ctx/lib/ins_ctx.mk, to fix this I did the following;
1. Start a new shell
2. Type cd ${ORACLE_HOME}/ctx/lib
3. Type vi ins_ctx.mk
4. Inser a line at the top of the makefile which sets the ORACLE_HOME to the correct value. (Or set the ORACLE_HOME environment variable to the correct value).
5. Save the file and close vi
6. Type make -f ins_ctx.mk
Once the make is complete tell the Oracle install procedure to ignore the error.

Oracle 8.0.5 Install on Linux for Alpha

I am getting a orainst.cm not found error while trying to Install
Oracle on the Alpha Server with Redhat Linux .
Tried all the symbolic link tricks of /bin/bash. Nothing works
for me.
Help me if you have any clues!
Thanks
Anand
null

Colin 't Hart (guest) wrote:
: Anand Radhakrishnan (guest) wrote:
: : I am getting a orainst.cm not found error while trying to
: Install
: : Oracle on the Alpha Server with Redhat Linux .
: : Tried all the symbolic link tricks of /bin/bash. Nothing
works
: : for me.
: : Help me if you have any clues!
: Ummmm, maybe because Oracle on Linux is for the Intel
: architecture...
: Cheers,
: Colin
I'm also getting that error and i'm using an Intel machine.
orainst script calls this executable orainst.cm. when i do the
file command on orainst.cm it says its 32 bit ELF 80836 or
something. the installation i got is from the internet so its in
gzipped/tar format. when i unzipped it it looked fine. i've
really given up installing oracle 8 on my linux machine. until i
saw ur message here. what could be causing this problem? i even
try to upgrade my kernel from 2.0.34 to 2.2 and still its not
working. by the way i'm using turbo linux (kyoto) on my intel
Pentium. i hope somebody is kind enough to help us in our
problems. Good Luck
Paolo
null

Price: Oracle 9i Enterprise second Edi. for Linux Redhat 9

We are planing to use Oracle 9i Second edition for Linux as our DB for our ecommerce website. Can you please tell me How much that will cost me in USD? Also suggest approprate DB version for Linix Redhat9.

From a shell window within X Windows, type
oemapp dbastudio
and it should launch the main tool.

After effects cc incomplete renders and other problems after installing 2014

i left an almost 5 minute long project rendering last friday only to find out this morning that the first 55 seconds where left out of the render, with my work area set to the entire timeline. in the past i've had some other issues such as no audio when setting the output to audio or corrupted audio when setting it to on.
i'm not entirely positive, but i think this problems started when i installed 2014 a few weeks ago.
anyone experiencing similar issues, do you find a correlation between them and having both cc and 2014 in the same machine?
thanks,
d.

There's no error on the log file, as far as the program concerns it rendered everything correctly.
My machine is an imac (iMac12,2) with 32gb ram and AMD Radeon HD 6970M with 2048 mb of VRAM.
My current settings (for approvals) are QT with H264 compression with audio output set to Auto and I'm rendering at half res, which in this project is 1024x1024 px, the render is taking approximately 4 and a half hours with MP off, last friday I tried it on and after 7 ours it only had less than 25% done and it said it still had 27 hours to go, so I canceled it and switch to MP off instead, it finished the render (incomplete, I found out today) in 2 hours and 38 minutes, plus 42 minutes for the missing portion this morning, which came with no audio.
I haven't rendered uncompressed or prores yet, but I will be doing tonight to see if that yields a different result.
Is this enough or you need more specifi data like solo switches settings, guide layers, etc?
Thanks,
D.

Can't "archive and install" or reinstall Snow Leopard and other problems

My laptop has been doing some funny things lately. I began noticing it mostly with video content. Especially when playing a DVD. The audio comes across as choppy. The video gets choppy. Now I have noticed that the mouse (track pad) seems jumpy. The arrow jumps across the screen when not intended to etc.
So, I thought I would do what was once called an Archive and install. I realize that Snow Leopard doesn't give that option, but it essentially does that if you choose to reinstall the OS.
This laptop is Model MacBook 2,1. It shipped with Leopard. I bout the SL upgrade and am trying to use that disc to reinstall the OS.
I get this message with a yellow triangle and exclamation point after I insert the disc and click the "install" button:
Mac OS X 10.6 cannot be installed on this computer. This disc requires that Mac OSX 10.5 or later already be installed on your computer."
I am confused because I am running 10.6.2
Any help??
Thanks.
Message was edited by: Daniel Peck

You get the message if you use the special, reduced price Leopard to Snow Leopard upgrade disc. The retail Snow Leopard disc doesn't require any OS to be preinstalled; the upgrade one requires that Leopard be installed for licensing reasons.

Microsoft Excel slowing down and other problems when SAP BPC EPM Add-in is installed

Hello,
Our client is having some problems with Microsoft Excel (MS Office 2013) since the SAP BPC EPM Add-in was installed in their computers.
They are suffering from Microsoft Excel slowing down, even when not connected to SAP BPC (10.0 NW version).
For example, when opening two or more excel archives, not connected to SAP BPC, Microsoft Excel crashes and is restarted with errors.
Have you experienced something similar in other installations?
Thank you very much, and kind regards,

In relation to the previous post , we have to emphasize that we have installed in ours PC's:
MS Office 2010 14.0.7116.5000 32 bit,
EPM add-on version 10.0 SP20 (10.0.0.8993).
and our customer have installed in theirs PC's:
MS Office 2013 15.0.4675.1001 32-bit.
EPM add-on version 10.0 SP19 patch 1 .NET 3.5 compilation 936.
Thank you very much

Not installing intel hd graphics hp oficcial site driver and brightness problem

after downgrading to window 8.1 to window 7 (64 bit ) issue of intel hd 4400 in hp 15 r0-14tx does not install the intel graphics (SHOWING ERROR : SYSTEM DOES NOT MEET MINIMUM REQUIREMENTS) PLZZZZZZZZZZZ help how to fix itzzzzzz.......
AND I also dont have recovery drive it is deleted by meeeee....

You have tried any other unsupported version of graphics driver???
If yes then uninstall it and reinstall your computer then try to reinstall driver which you have just downloaded.
If you dont have installed any unsupported driver then try the following
1) Right click on computer
2) Click on manage
3) In left panel select device manager.
4) Find your graphics controller (Mostly found in display adapter)and right click on it and choose option update driver software.(You need to find your graphics controller yourself because it was diferrent for diferrent models i.e. I have Intel(R)HD Graphics in display adaptars)
5)If this was doesnt fix your problem then try Intel driver updater or Driver navigator tool

Oracle 8.1.5 install on Linux Redhat 6.0: character set (and other) problem(s)

Similar Messages

Maybe you are looking for