Oracle 8.1.5 vs Oracle Enterprise Manager 2.2

Hi,
I've installed 8.1.5 server in my machine, do I need to installed OEM 2.2 into a different Oracle home? Or I can install them in the same Oracle Home?
Any feedback is appreciated!! Thanks!

OEM 2.2 should presumably have some sort of installation doc that goes over minimum versions, etc. Assuming it works with Oracle 8.1.5, I don't forsee a problem.
Justin

Similar Messages

Oracle scheduler : Setting job attributes using Enterprise Manager

Hi,
I have created below job and set the attribute "'raise_events" using the dbms_scheduler.set_attribute procedure.
begin
dbms_scheduler.create_job
( 'ebj_A', job_action =>
'/tmp/job_A.ksh',
job_type => 'Executable',
enabled => false ,
auto_drop =>false) ;
dbms_scheduler.set_attribute
( 'ebj_A' , 'raise_events' , dbms_scheduler.job_run_completed);
end;
Now I am creating the same job using the Enterprise Manager (GUI).
I donot see any where to set the attribute (Raise_events) using GUI.
Please can you tell me can we set that attribute using the Enterprise manager or not.
If yes please let me know how.
Thanks in advance.
Sreenath.

Hi ,
I am modified my question.
We could set the value for "raise_events" attribute using Dbms_Scheduler.Set_Attribute.
Can we also set the value for the "raise_events" attribute using the EM.(GUI).
Please let me know.
Thanks in advance.
Sreenath.

Unable to launch Enterprise Manager console(Oracle 9.2.0.4.0)

I am using oracle 9i db (9.2.0.4.0).
when i try to launch oracle enterprise manager console i am not able to do so.
In short
After putting username, password,service,connect as ...
and clicking on OK button.
nothing happens.No message,no warning.
but i am able to connect to the same schema in sql*plus.
please suggest wat needs to be done.

I met the same problem, can use plsql to connect db (oracle 10g release2), but in the enterprise manager webpage, when I keyed in the right userid/password, nothing happen, but if I purposely key in wrong userid or password, it will show "invalide userid or password", can anyone help?

Configure Enterprise Manager Console in Oracle 10.2.0.4

Hi.. Friends,
We recently upgraded our SAP 4.7 to ECC 6 with Oracle 10.2.0.4 DB.. In Oracle 9 we have an option Enterprise manager console But in our new Oracle 10.2.0.4 there is no option like that. How can i configure Enterprise Manager console in this.
Our Operation System is Windows Server 2008.
Regards
Mahendran

Hi Mahendra,
OEM not supported in standard SAP See note Note 105047 - Support for Oracle functions in the SAP environment.
You can configure OEM but first check your license scope - Note 740897 - Info about the Oracle license scope; Required Oracle options
After fullfill read below note
Note 355770 - Oracle Enterprise Manager Database Control
Note 386413 - Oracle Enterprise Manager (OEM) in the SAP environment
SurendraJain

Unable to drop Oracle Enterprise Manager console in Oracle 11g

Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos drop
STARTED EMCA at Jun 16, 2009 9:59:58 PM
EM Configuration Assistant, Version 11.1.0.7.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: NM45
Listener port number: 1529
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.util.EMCALogManager addLogFileIntern
al
WARNING: Adding log file D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log failed. Messages will not be logged in this file.
Jun 16, 2009 10:00:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log.
Jun 16, 2009 10:00:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 16, 2009 10:00:22 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Can't find file D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
Could not complete the configuration. Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.
D:\Oracle\Ora11G\BIN>
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanks
With Regards
Hemant

hem_kec wrote:
Hello all,
I am trying to drop the Oracle Enterprise Manager console in Oracle 11g (Windows server 2008 32 bit). I am getting the following error.
D:\Oracle\Ora11G\BIN>emca -deconfig dbcontrol db -repos dropBefore this you shoud do :
ORACLE_HOME/bin/emca -x <sid>
ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
Refer to the log file at D:\Oracle\Ora11G\cfgtoollogs\emca\ENMSCSDB\emca_2009_06_16_22_00_20.log for more details.did you check this log ?
Even though the D:\Oracle\Ora11G\F1SMLFS_NM45\sysman\config\emoms.properties is exists in the disk. Any Idea.yes. you could visit metalink and see 278100.1 How To Drop, Create And Recreate DB Control In A 10g Database
In Oracle 9i " Enterprise manager Configuration Assistant" (Open “Start ---> Programs ----> Oracle - OraHome92 ---> Configuration and Migration
Tools -----> Enterprise manager Configuration Assistant) was present. Is there any replacement of this in Oracle 11g ?
Thanksok
With Regards
Hemantbest regards

Oracle XE enterprise manager

Installed and used oracle XE with the cut down enterprise manager. I opted not to restart the db on reboot. Now there's no enterprise manager, no emctl, no documentation on starting it back up again. ANyone come across this?
I know this is not really a grid question, but you can only register for the XE discussion forum from a link on the em xe home... grr.

I think that XE comes with HTMLDB application for XE database control and not with EM console.Actually EM DB console that comes with Enterprise edition is an additional component even in Enterprise edition.
Michael

Enterprise Manager is not able to connect to the database instance. Open??

Hello there,
After I installed oracle database and tried to start Enterprise Manager, I got the message:
Enterprise Manager is not able to connect to the database instance.
All statuses are OK (green and up) except database instance. It is also green and up but open. (Details: The instance is open.)
Can anyone help me about it?
I use Windows XP x64 with all patches installed. Oracle database R11g x64.
I tried with different database versions and different machines and different OS and loopback adapter and... my EM still want to log in.
I can log in with sqlplus. It accepts any pass for sys (as sysdba). Why?
My log files are available here: http://195.66.185.187/log.zip

You are using a bequeath connection when logging in with SQL*Plus on the server so the password is not validated.
Log in using SQL*Plus this way:
sqlplus /nolog
followed by
conn sys@<service_name> AS SYSDBA
and provide the correct password
My guess it it will fail.
If so then you need to use the correct password and if you don't know what it is set it when logged on as SYS.

Looking for what software required for Enterprise Manager Installation

Hi All,
I am fairly new in working with Enterprise Manager, Previously used 11g Database Control, but never install Enterprise Manager (OEM). Now due to the increase in databases, I am considering to install OEM (Oracle Enterprise Manager) to list all database (from over 20 Linux severs) to one location.
I have read documentation and still confused on what should be installed for OEM. I am planning to use OEM 12c Release (12.1.0.4), my current databases are 11gR2 (11.2.0.4 ).
Could you tell what I need from below list?
OEM (12.1.0.4)
Web Logic server (Do I need that separately, or will this be installed with OEM?)
OEM Agent on all other 20 servers (do I need to install separate software on them? Please guide)
Any specific version of Java.
Please guide me if I need any other software or plugin.
I have already installed oracle software and have created a database by using “Custom” option in DBCA. My server OS is Linux 64 Bit for Enterprise Manager.
Thanks in Advance.

Hi,
You would need 12c OEM cloud control software , Database software(For creating repository) and agent software (For monitoring targets on other hosts)
Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11g Release 1 (10.3.6) are installed by default with the 12c OMS installation although you do have a option of installing it separately if you want but Oracle strongly recommends using the 12c installation process to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12c.
Below is the link for Enterprise Manager Cloud Control 12c Architecture
http://docs.oracle.com/cd/E24628_01/doc.121/e25353/overview.htm#EMCON112
For 12c OMS installation steps refer to
http://docs.oracle.com/cd/E24628_01/install.121/e22624/toc.htm
EM 12c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using GUI Mode (Doc ID 1488154.1)
For agent installation refer to
Installing Management Agents Using Add Host Targets Wizard or EM CLI
http://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#EMBSC181
Installing agents using other methods
http://docs.oracle.com/cd/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323
To download 12c software
http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
Regards,
Rahul

Enterprise Manager Java Console for 10G

Hi
I have oracle 10g R2.
can i install Enterprise Manager Java Console for 10G.
if yes then tell me from where i can download Enterprise Manager Java Console for 10G
any Link or help please.
Regards,
Nasir.

From the same link..
>>
In addition to using Oracle Enterprise Manager Database Control or Grid Control, you can use the Oracle Enterprise Manager Java Console to manage databases from this release or previous releases. You install the Java Console by using the Administrator installation type.
>>

Enterprise Manager - Hang Analysis

I am using Oracle 10g Release 1 . On Enterprise Manager , Hang Analysis I am looking for a way to examine data from the last 40 hours. I had some frozen sessions starting yesterday morning and am searching for possible causes. The system is working fine at the moment. On the hang analysis option on Enterprise Manager there doesn't seem to be a way of examing past data.

Did you check the entries you made in your preferred credentials?
Eric

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Problem with login using Oracle Enterprise Manager

I am new to Oracle. I installed the software (my Operating System is Windows XP) and created a database following the guidelines in the documentation and Oracle By Example. Now I can not log on as the user SYS through the Enterprise Manager. However, I can login through SQL Plus. I am using the password that I assigned during the installation.
In OBE, I got stuck at the step where you check the status of (or start) the dbconsole. I went to the DOS prompt and typed:
emctl status dbconsole
I got the error:
Environment variable ORACLE_SID not defined. Please define it.
If anyone can explain what the problem is, I'd appreciate it.

there are a number of files at this location.
Here is an error from emdctl.trc:
2006-10-23 14:12:36 Thread-236 ERROR http: 1760: snmehl_read: error on read: An existing connection was forcibly closed by the remote host.
(error = 10054)
emoms.log:
2006-10-23 00:00:02,485 [JobWorker 63:Thread-13] ERROR em.jobs executeCommand.159 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup to set required parameters.

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to configure Oracle Enterprise manager.

Hello,
I recently installed Oracle EBS 12.1.1 on RedHat Enterprise Linux 6.2(64 bit). Then upgraded the database to 11.2.0.3 and application to 12.1.3.
While upgrading the database i got the error message that enterprise manager configuration failed.
I now want to configure the enterprise manager, can anyone please help me with this.
Please find the log file and screen shot at below link:-
https://docs.google.com/file/d/0B_bzj8IFyvCRNnRUclpUVnNjVTQ/edit?usp=sharing
Thanks,
Swapnil

Hi,
Following your attached files i noted that the error was :
oracle.sysman.emcp.exception.EMConfigException: Password file may be missing or configured incorrectly
is the password file exists under $ORACLE_HOME/dbs/orapwSID?
if there is not a orapw file so you have to create it
orapwd file=orapwSID password=sys entries=3
Thnx

How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance

Hi All,
Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
Reagrds,
Vikas

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

Error while creating data source using Oracle Enterprise Manager 10g

Hi,
I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
However, I get an error when I try to create a data source.
The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="TestDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/TestDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          url="jdbc:oracle:thin:@hostName:1521:test"
          username="user"
          password="password"
          min-connections="5"
          max-connections="20"
          inactivity-timeout="30"
     />
When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
quote:
Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
unquote:
Could somebody tell me what I'm doing wrong ?
I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
Any help will be greatly appreciated.
Thanks,
Shyam

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Oracle 8.1.5 vs Oracle Enterprise Manager 2.2

Similar Messages

Maybe you are looking for