Oracle 8.1.6 for NT installation error

Hi, I have oracle 7.3 client installed on a NT server. I then installed 8.1.6 in a different directory. The installation hit an error on ms???.dll file. By ignoring the message, the installation is successful. I can connect to a Oracle database server vi sqlplus and query the table. While Access 97
will just hang when I try to link the table. Question, can I remove the ms???.dll and do
another install? Should I uninstall the 7.3 before I install 8.1.6. Any comments will be appreciated.
null

Dear:
My English is bad, but I think you will understand me what I
saying.I show what i did in my computer system.
First: I download i386-glibc-2.1-linux.tar.bz2,
readme.oracle8i from
ftp://ftp.ca.kernel.org/pub/software/libs/glibc/hjl/sdk/2.1
and
Second : I read the file readme.oracle8i,and do what it
said.
It's ok to solve the problem.
Good Luck.

Similar Messages

ICloud for Windows Installation Error Windows 8.1

Updated to IOS 8.0 on iPhone and iPad. Cannot get Contacts from these devices onto PC. Tried removing iCloud and reinstalling but keep getting "iCloud for Windows Installation Error". Data Files in Outlook shows iCloud but states it is Not available. The following error codes are in the error report:
Error: 0x80070005: DataProviderRegistered
Error: 0x8007005: ZebraMapiCopySession::CanCreateZebraStpre: CreateMessageService failed

Nothing? Nobody....

Oracle 8.1.5 for NT installation Windows XP proffessional

Oracle 8.1.5 for NT is installed on windows XP Proffessional. Installation time SID = ORCL815. Oracle TNSListner service and oracle webAssistant service are started. But oracle serviceORCL815 status is showing as starting when startup type is Automatic. If startup type is manual and when I am stating it this gives "error 1053: The service did not respond to the start, or control request in a timely fashion".
Now the documentation says "ORA-01053 user storage address cannot be read
Cause: A bind variable or other user area could not be read by Oracle.
Action: Check that binds are done correctly on valid user buffers, then retry the operation.
So what will be the solution to start the oracle service.

Rick,
I just mailed you the code and instructions for a work-around. However, we strongly advise you to upgrade to 8.1.6 or 8.1.7 !
null

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Oracle 10g for Windows installation - Error 1067

Hello Folks
I am trying to install Oracle 10g for Windows on my WIndows 7 Ultimate OS. Everything went fine until I rebooted and tried to run the *SQL Plus. ALthough the Listener as well as the Oracle Servide shoudl automatically start, but for some reason..they didn't. As a result, I went into the Services and tried to manually run them but to my disappointment getting the folowing error:
Windows could not start the OracleServiceORADB1 service on local computer.
Error 1067: The process terminated unexpetedly.
Any idea what went wrong..and how should I get this right?
Thanks

Pl identify the exact version of "10g" that was installed.
The only version that is supported is 10.2.0.5 - see http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
Srini

On RHEL 5.7, Oracle 11.2.0.3 Client installation error

Hello Friends,
I am getting below error while installing Oracle 11gR2 client on a RHEL5.7 Machine. After I finished the installation by silent mode whenever I am launching the sqlplus /nolog command
sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory
whereas I guess the settings in .bash_profile seems ok. Please validate:
[oracle@localhost ~]$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
        . ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/oraapp
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=/u01/oracle/oraapp/bin:$PATH
I checked metalink where It is said that this could be because of RPM, ID 1329085.1
Also please find the gcc details:
[oracle@localhost ~]$ gcc -v
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)
Any help on this problem would be really nice
-Regards,
J_DBA

Also I got below thing in LOG of silent Installation
filename = /u01/oracle/oraapp/opmn/bin/onsctl
INFO: Query Returned: true
INFO: Setting up 'HAS Common Files 11.2.0.3.0 '
INFO: Setting up 'HAS Common Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component HAS Common Files
INFO: component has plugIns in XML: no configlog.xml written
INFO: Setting up 'SQL*Plus Required Support Files 11.2.0.3.0 '
INFO: Setting up 'SQL*Plus Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component SQL*Plus Required Support Files
INFO: Setting up 'XDK Required Support Files 11.2.0.3.0 '
INFO: Setting up 'XDK Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component XDK Required Support Files
INFO: Setting up 'RDBMS Required Support Files Runtime 11.2.0.3.0 '
INFO: Setting up 'RDBMS Required Support Files Runtime 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component RDBMS Required Support Files Runtime
INFO: Setting up 'RDBMS Required Support Files 11.2.0.3.0 '
INFO: Setting up 'RDBMS Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component RDBMS Required Support Files
INFO: Calling Action unixActions10.2.0.3.0 createLink
        source = /u01/oracle/oraapp/lib/libclntsh.so.11.1
        destination = /u01/oracle/oraapp/lib/libclntsh.so
        overwriteExistingLink = true
        overwriteExistingDir = null
INFO: creating link '/u01/oracle/oraapp/lib/libclntsh.so.11.1' for '/u01/oracle/oraapp/lib/libclntsh.so'
INFO: creating link '/u01/oracle/oraapp/lib/libclntsh.so.11.1' for '/u01/oracle/oraapp/lib/libclntsh.so'
INFO: Exception thrown from action: createLink
Exception Name: FileNotFoundException
Exception String: File not found: %fileName%
Exception Severity: 2
INFO: Retry Handler not registered, using Super class functionality
File not found: %fileName%
INFO: Exception handling set to prompt user with options to Retry Ignore
User Choice: Ignore
INFO: Setting up 'Required Support Files 11.2.0.3.0 '
INFO: Setting up 'Required Support Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component Required Support Files
INFO: Setting up 'Installation Common Files 11.2.0.3.0 '
INFO: Setting up 'Installation Common Files 11.2.0.3.0 '
INFO: 7/16/13 5:39:21 PM IST: Starting install Install Phase 2 of component Installation Common Files
INFO: Calling Action generalActions10.2.0.9.0 setenv

Oracle 10g (10.2.0.1) installation error

Hi everyone !!! I know that Oracle doesn't support FreeBSD but I'm my problem is probably stopping a decision of choosing Oracle as a project database. This means licenses guys!!!!! Can you please just guide me for a solution to my problem?
I need to test Oracle 10g in FreeBSD. I've installed FreeBSD 7 from the ISOs in Freebsd homepage with full base system and full packages. I've then activated the linux_base-fc4 linux emulation port and compile a new kernel version for Oracle with:
options COMPAT_LINUX
options SEMMAP=128
options SEMMNI=128
options SEMMNS=32000
options SEMOPM=100
options SEMMSL=250
options SHMMAXPGS=262144
options SHMMNI=4096
options SHMSEG=4096
options MAXDSIZ="(1024*1024*1024)"
options MAXSSIZ="(1024*1024*1024)"
options DFLDSIZ="(1024*1024*1024)"
I've then created an Oracle account with the /compat/linux/bin/bash sheel for linux compatability. I unzip the 10201_..... oracle zip for linux and run the installer from within oracle account.
I've manage to solve a lot of problems but with this one I'm stucked!!! At 62% I receive a message box saying "Error invoking target 'relink' of makefile ins_precomp.mk". I go to the make.log and I see:
/usr/bin/make -f ins_precomp.mk relink ORACLE_HOME=/home/oracle/10gR2 EXENAME=proc/Linking /home/oracle/10gR2/precomp/lib/proc
/usr/bin/ld: warning: libc.so.6, needed by /home/oracle/10gR2/lib//libnnz10.so, may conflict with libc.so.7
/usr/local/lib/compat/libc.so.6: warning: WARNING! setkey(3) not present in the system!
/usr/local/lib/compat/libc.so.6: warning: warning: this program uses gets(), which is unsafe.
/usr/local/lib/compat/libc.so.6: warning: warning: mktemp() possibly used unsafely; consider using mkstemp()
/usr/local/lib/compat/libc.so.6: warning: WARNING! des_setkey(3) not present in the system!
/usr/local/lib/compat/libc.so.6: warning: WARNING! encrypt(3) not present in the system!
/usr/local/lib/compat/libc.so.6: warning: warning: tmpnam() possibly used unsafely; consider using mkstemp()
/usr/local/lib/compat/libc.so.6: warning: warning: this program uses f_prealloc(), which is not recommended.
/usr/local/lib/compat/libc.so.6: warning: WARNING! des_cipher(3) not present in the system!
/usr/local/lib/compat/libc.so.6: warning: warning: tempnam() possibly used unsafely; consider using mkstemp()
/usr/bin/ld: warning: ld-linux.so.2, needed by /home/oracle/10gR2/lib/stubs//libdl.so, not found (try using -rpath or -rpath-link)
/home/oracle/10gR2/precomp/lib/pdc.o(.text+0x236): In function `pdlitlen':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgstdf.o)(.text+0x39e): In function `pgswget':
: undefined reference to `_IO_getc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x10d): In function `o2ucpnametoc':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x22f): In function `o2ucpnametoc':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x24e): In function `o2ucpnametoc':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x268): In function `o2ucpnametoc':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x282): In function `o2ucpnametoc':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x370): In function `o2ucpnametoc':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x397): In function `o2ucpnametoc':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x3b9): In function `o2ucpnametoc':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/precomp/lib/libpgp.a(pgo2ucp.o)(.text+0x3db): In function `o2ucpnametoc':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/lib//libpls10.a(spssimb.o)(.text+0x4ac): In function `pss_putc':
: undefined reference to `_IO_putc'
/home/oracle/10gR2/lib//libpls10.a(spssimb.o)(.text+0x649): In function `pss_getc':
: undefined reference to `_IO_getc'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0x10): In function `spdzjF99_System_Error':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0x486): In function `spdzjF01_Execute_Command':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0xa87): In function `spdzjF02_Delete_File':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0xac1): In function `spdzjF03_Rename_And_Delete':
: undefined reference to `__xstat64'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0xb36): In function `spdzjF03_Rename_And_Delete':
: undefined reference to `__xstat64'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0xb77): In function `spdzjF03_Rename_And_Delete':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.text+0xbed): In function `spdzjF03_Rename_And_Delete':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(spdzj.o)(.gnu.linkonce.t.stat64+0xc): In function `stat64':
: undefined reference to `__xstat64'
/home/oracle/10gR2/lib//libpls10.a(ph1pp.o)(.text+0x688): In function `ph1pp_check_ccflags':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(ph1pp.o)(.text+0x1940): In function `ph1pp_build_ccflags_list':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(ph1pp.o)(.text+0x1c5e): In function `ph1pp_resolve_ccflags':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(ph1pp.o)(.text+0x21c9): In function `ph1pp_read_id':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(ph1pp.o)(.text+0x2247): In function `ph1pp_read_integer':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(ph1pp.o)(.text+0x2289): more undefined references to `__ctype_b_loc' follow
/home/oracle/10gR2/lib//libpls10.a(speplm.o)(.text+0x2e): In function `speplm_dlopen':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(speplm.o)(.text+0x8c): In function `speplm_dlclose':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(speplm.o)(.text+0xf7): In function `speplm_dlsym':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libpls10.a(pdy6.o)(.text+0x17e6): In function `pdy6M64_Native_Name':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(phdd.o)(.text+0x147): In function `phddnoden':
: undefined reference to `stdout'
/home/oracle/10gR2/lib//libpls10.a(pdz2.o)(.text+0x1ac9): In function `pdz2M25_Base_Name':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libpls10.a(pfrdis.o)(.text+0x395): In function `pfrdis':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhcnv.o)(.text+0x2f9): In function `lxhcnv':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhcnv.o)(.text+0x332): In function `lxhcnv':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhlmod.o)(.text+0xec): In function `lxhlmod':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhlmod.o)(.text+0x148): In function `lxhlmod':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhlmod.o)(.text+0x1a1): In function `lxhlmod':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhlmod.o)(.text+0xc0b): In function `lxhlmod':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxhlmod.o)(.text+0xc6d): more undefined references to `__ctype_tolower_loc' follow
/home/oracle/10gR2/lib//libnls10.a(lxpcget.o)(.text+0x8f): In function `lxpcget':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/lib//libnls10.a(lxplget.o)(.text+0x5e): In function `lxplget':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxplget.o)(.text+0x75): In function `lxplget':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/lib//libnls10.a(lxplset.o)(.text+0xf9): In function `lxplset':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxpname.o)(.text+0xd0): In function `lxpname':
: undefined reference to `__ctype_b_loc'
/home/oracle/10gR2/lib//libnls10.a(lxpsget.o)(.text+0x63): In function `lxpsget':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxpsget.o)(.text+0x7a): In function `lxpsget':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/lib//libnls10.a(lxptget.o)(.text+0x64): In function `lxptget':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxptget.o)(.text+0x7b): In function `lxptget':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/lib//libnls10.a(slms.o)(.text+0x362): In function `slmsop':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libnls10.a(slms.o)(.text+0x462): In function `slmscl':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libnls10.a(slms.o)(.text+0x5d9): In function `slmsrd':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libnls10.a(slms.o)(.text+0x5f1): In function `slmsrd':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libnls10.a(slms.o)(.text+0x6cb): In function `slmspe':
: undefined reference to `stderr'
/home/oracle/10gR2/lib//libnls10.a(lxedget.o)(.text+0x42): In function `lxedget':
: undefined reference to `__ctype_tolower_loc'
/home/oracle/10gR2/lib//libnls10.a(lxedget.o)(.text+0x59): In function `lxedget':
: undefined reference to `__ctype_toupper_loc'
/home/oracle/10gR2/lib//libcore10.a(slffgtc.o)(.text+0x5a): In function `SlfFgtc':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libcore10.a(slffgtc.o)(.text+0x72): In function `SlfFgtc':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libcore10.a(slffgts.o)(.text+0x65): In function `SlfFgts':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libcore10.a(slffgts.o)(.text+0x7d): In function `SlfFgts':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libcore10.a(slffprintf.o)(.text+0x3b): In function `SlfFprintf':
: undefined reference to `__errno_location'
/home/oracle/10gR2/lib//libcore10.a(slffprintf.o)(.text+0x53): more undefined references to `__errno_location' follow
/home/oracle/10gR2/lib//libirc.a(proc_init.o)(.text+0x7): In function `__bad_processor_detected':
: undefined reference to `stderr'
/home/oracle/10gR2/lib//libirc.a(proc_init.o)(.text+0x17): In function `__bad_processor_detected':
: undefined reference to `stderr'
/home/oracle/10gR2/lib//libirc.a(proc_init.o)(.text+0x27): In function `__bad_processor_detected':
: undefined reference to `stderr'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `free@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `strchr@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `atoi@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `_setjmp@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `__ctype_b_loc@GLIBC_2.3'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `getpid@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `realloc@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `localtime@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fgets@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `ftello64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `strncpy@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `opendir@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `calloc@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `getutent@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `recvfrom@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fread@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `closedir@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fseek@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `sprintf@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `strncmp@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `close@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `gmtime@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__sigsetjmp'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `sscanf@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `sleep@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `ctime@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `truncate64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `read@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `gethostbyname@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `stdin'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `strncasecmp@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `gettimeofday@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `gethostname@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `open@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `clock@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `time@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fputs@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `malloc@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `readdir@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fclose@GLIBC_2.1'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `stdout@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `mktime@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `open64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `longjmp@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `endutent@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__assert_fail'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__h_errno_location'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `getuid@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `__h_errno_location@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fprintf@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `vsnprintf@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `setutent@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `mmap64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `perror@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__lxstat64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `vfprintf@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `send@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `strstr@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__fxstat64'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__xstat'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `getppid@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `socket@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `__errno_location@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `__fxstat'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `stderr@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `feof@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `__ctype_tolower_loc@GLIBC_2.3'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fwrite@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fdopen@GLIBC_2.1'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `getrusage@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `vsprintf@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `lseek64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `memmove@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `fopen@GLIBC_2.1'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `rewind@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `connect@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `fseeko64'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `printf@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `strerror@GLIBC_2.0'
/home/oracle/10gR2/lib//libnnz10.so: undefined reference to `__xstat@GLIBC_2.0'
/home/oracle/10gR2/lib//libclntsh.so: undefined reference to `fopen64'
chmod: /home/oracle/10gR2/precomp/lib/proc: No such file or directory
make: *** [home/oracle/10gR2/precomp/lib/proc] Error 1
I can't find out what is missing. Can you give me an idea?

Hi everyone !!! I know that Oracle doesn't support FreeBSD but I'm my problem is probably stopping a decision of choosing Oracle as a project database. This means licenses guys!!!!! Can you please just guide me for a solution to my problem?
Since you are calling the 'Licenses guys' I assume you have a valid Oracle License for your project. Don't expect Oracle support services to monitor this forum, everyone here are regular oracle users and we are not in any way related with Oracle Support.
If you have a valid Oracle CSI you should raise a SR in Metalink. And since you already know FreeBSD is not a supported platform, then there are no surprises, you know where the problem is. It may work after some workarounds, but you are on your own and dessuported. The only free linux supported by Oracle is OEL, and if you are planning to use Oracle it means you should change the OS.
~ Madrid
http://hrivera99.blogspot.com

Oracle Portal 3.0 for NT installation problems.. HELP!!!

this is what shows up when I try to access my portal page:
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Wed, 06 Dec 2000 19:09:23 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
Notes:
I'm running Oracle 8.1.6 on a different box then the Portal application. I loaded the Oracle Client on my machine(with Portal). I've gone through the Portal installation instructions many times and I'm almost certain I've configured everything correctly(but obviously not). I've also gone through the Net8 Assistant to see if I can get a connection and can.. I've made sure my db is up by using SQL Plus. Any help would be greatly appreciated.

I thought I was out of the woods but have gotten some strange behavior. I'm able to work inside of the Portal application.. then I got this error..
Proxy log On failed.
Please verify that you have specified correct connectivity information i.e.username, password & connect-string in the Database Access Descriptor
Error-Code:12500
Error TimeStamp:Fri, 08 Dec 2000 18:32:38 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network
transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
This is sort of the same thing from before. As soon as it happened I tested things out like:
testing out the Oracle HTTP Server
- Apache
- Jserv (demo)
- modplsql
for connectivity. I'm able to click on the above links and see that they are working. Then I brought down the OracleportalHTTPServer service and restarted.
I then tried to use SQL Plus to test db connectivity using Username: internal Password:xxxx with the service name but it spits back:
TNS:listener failed to start a dedicated server process. It seems no matter who I try and login as using SQL Plus I get the same thing. As I mentioned before I have the db on another machine with the Portal application & Oracle 8.1.6 Client on my machine. I didn't configure anything after I installed the 8.1.6 Enterprise Edition.. I was able to bring up the Portal page with no problems. Am I missing something.. seems very strange that I'm able to work in the application for a bit and then have it die on me.
I jumped onto the machine with my db.. brought down the TNSListener on that end, brought down the db service (OracleServiceXXX)and brought it back up and was able to use SQL Plus on this machine and get a connection to the db. I then got back on my machine, brought down the OracleportalHTTPServer service on my side, brought it back up and used SQL Plus to show a connection to the db. Thoughts??

Oracle BEA Platform 10.2 MP1 Installation Error

Hi,
I'm trying to install Oracle BEA Platform 10.2 MP1 (using the generic installer) on Windows 7 64 bit OS.
After I proceed from the 'Create a new bea home' step, right before installing any files it gives me the error "A fatal error has occured, this application will terminate" and on clicking on Ok, it quits the installer.
I have Weblogic 10.2 MP1 installed on my machine using the 32-bit installer and it works fine. I'm just trying to install the 64-bit version to extract maximum memory performance.
Also, the version of java installed on my machine is 1.6:
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode)
Any idea how to resolve the error?
Thanks!

Hi,
Patch 6365595 is an application which should be applied as applmgr user using adpatch. Please refer to the following threads for details about applying application patches.
Need to apply patch!
Need to apply patch!
How to apply NLS patches in R12
How to apply NLS patches in R12
Once you apply the patch successfully, just bounce the application services and check the login page again.
Regards,
Hussein

Oracle RAC 10g R2 in Windows Installation error

Hi!
Can anyone help me with this one?
I have trying to installa RAC 10g R2 in Windows Server 2008 R2. I am encountering the error below:
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
nodes. The specified service does not exist as an installed service
Thanks..

Pl indicate which version of 10gR2 - only 10.2.0.5 is supported on Win 2008 R2
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
Pl also post in the RAC forums - RAC, ASM & Clusterware Installation
Srini

Oracle RAC 10.2.0.4 installation error in windows 2008 R2

Hi!
below is the error i got;
INFO: Command = C:\Windows\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.

Hi,
this is not enough information to help you with this problem.
=> Have you checked any necessary prerequisites (Documentation and RAC Starter Kit in support.oracle.com)
=> Do you use OCFS or RAW devices for OCR?
=> Do you use an english Windows version or another language?
=> What is included in the clusterware logs?
etc...
Regards
Sebastian

Oracle Application Server 10.1.4 Installation Error

Hi,
Ive been trying to install OAS and keep getting installation erros at the OID Configuration Assistant. Im on Sun Solaris 10 and meet all system requirements and have all the patches listed. When I check the oidca.log i get this:
Entering Ldap Post Installation Set File Permissions
Setting wallet file protections
Leaving Ldap Post Installation Set File Permissions
Stopping OID Server using OPMN..
Starting OID Server using OPMN..
Mon Oct 29 04:30:44 GMT 2007 Bind request issued. Waiting for OID Server response.
with a retryCount:20
Mon Oct 29 04:31:14 GMT 2007 Bind request issued. Waiting for OID Server response.
javax.naming.CommunicationException: itsstx2orcdb01:389 [Root exception is java.net.ConnectException: Connection refused]
 at oracle.ldap.util.jndi.ConnectionUtil.returnInitialLdapContext(ConnectionUtil.java:491)
 at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:134)
 at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:156)
 at oracle.ldap.oidinstall.backend.OIDConfiguration.isOIDSrvUp(OIDConfiguration.java:961)
 at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:277)
 at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:508)
 at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:845)
 at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:984)
Caused by: java.net.ConnectException: Connection refused
 at java.net.PlainSocketImpl.socketConnect(Native Method)
 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
 at java.net.Socket.connect(Socket.java:452)
 at java.net.Socket.connect(Socket.java:402)
 at java.net.Socket.<init>(Socket.java:309)
 at java.net.Socket.<init>(Socket.java:124)
 at com.sun.jndi.ldap.Connection.createSocket(Connection.java:346)
 at com.sun.jndi.ldap.Connection.<init>(Connection.java:181)
 at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:119)
 at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1668)
 at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2599)
 at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:290)
 at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
 at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
 at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
 at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
 at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
 at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
 at javax.naming.InitialContext.init(InitialContext.java:219)
 at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:133)
 at oracle.ldap.util.jndi.ConnectionThread.run(ConnectionThread.java:61)
it tries many times and then get this at the end:
Mon Oct 29 05:00:14 GMT 2007Could not contact OID server.
Stopping OID Server using OPMN..
oracle.ldap.oidinstall.backend.OIDCAException: OID Server could not be started. Please see the log files.
 at oracle.ldap.oidinstall.backend.OIDConfiguration.isOIDSrvUp(OIDConfiguration.java:972)
 at oracle.ldap.oidinstall.backend.OIDConfigWrapper.configOID(OIDConfigWrapper.java:277)
 at oracle.ldap.oidinstall.OIDCA.doSilent(OIDCA.java:508)
 at oracle.ldap.oidinstall.OIDCA.run(OIDCA.java:845)
 at oracle.ldap.oidinstall.OIDCA.main(OIDCA.java:984)
when i check the opmn.log I get this:
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
I saw some documentation that said to restart using oidmon...but I cant find oidmon anywhere....can anyone help?

user602714, have you been able to get past this? I have the same issue. Thanks.

Oracle lite xsql web to go installation error

I have installed Oracle lite in windows 2000 professional. I installed the XSQL also. I configureged web to go. I get the demo (index.html) screen. I changed the connection name in helloworld.xsql to lite. WhenI try to run it
I am getting the following error
XSQL-007: Cannot acquire a database connection to process page.
java.lang.ClassNotFoundException: oracle.lite.poljdbc.POLJDBCDriver
What should I do to correct this?
null

the web-to-go server portion of Oracle Lite can only be installed on NT at this time. the future relase version 4.1.1 should support solaris (per oracle support).
After installation on the server side is complete, the web-to-go client software can be pushed down by connecting through a web browser to your web-to-go server by
typing http://yourwebtogoservername/webtogo/setup
the client setup.exe file that will download can be run on 95,98 and NT (per Oracle support)

Dialog instance for portal installation error in db2 linux

Dear all,
i am installing a dialog instance for the exsisting portal server for the load balancing .while installing i am facing the following error.
SAPINST_DEV.log is as follows
TRACE 2011-08-17 12:17:39.380
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks. '.
TRACE 2011-08-17 12:17:39.380
Function setMessageIdOfExceptionMessage: nw.configError
WARNING[E] 2011-08-17 12:17:39.381
 CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks. '.
TRACE 2011-08-17 12:17:39.381 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-08-17 12:17:39.398 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 7072
TRACE 2011-08-17 12:17:39.435 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 7073
ERROR 2011-08-17 12:17:39.718 [sixxcstepexecute.cpp:951]
FCO-00011 The step runBatchconfig with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|runBatchconfig was executed with status ERROR .
TRACE 2011-08-17 12:17:39.727 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Application Server > IBM DB2 for Linux, UNIX, and Windows > Dialog Instance. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI. </body></html>
TRACE 2011-08-17 12:17:39.727 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
SAPINST.log error
INFO 2011-08-17 12:17:36.946
Creating file /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/batchconfig.log.
INFO 2011-08-17 12:17:36.971
Output of /opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/ESP/SYS/global/security/lib/tools:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/BatchConfig.xml is written to the logfile batchconfig.log.
WARNING 2011-08-17 12:17:39.377
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig /usr/sap/ESP/SYS/global/security/lib/tools:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/install/sharedlib:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar:/usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar /tmp/sapinst_instdir/NW04S/LM/AS/DB6/DI/BatchConfig.xml" finished with return code 183. Output:
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks.
WARNING[E] 2011-08-17 12:17:39.381
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc.jar file stated but does not exist !
Warning : /usr/sap/ESP/SYS/global/db6/jdbc/db2jcc_license_cu.jar file stated but does not exist !
Can not get DB connection. Batchconfig will only be able to execute offline tasks. '.
ERROR 2011-08-17 12:17:39.718
FCO-00011 The step runBatchconfig with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|runBatchconfig was executed with status ERROR .
kindly help on this issue.
Regards
Revantha Vishnu

> Java EE Engine configuration error. DIAGNOSIS: See output of logfile batchconfig.log: '
What do you see in that log?
Markus

Photoshop Elements 11 for MAC Installation Errors

Why do I receive the error message “inconsistency in the installer database. Please restart your computer and install again”.? I have restarted my computer several times and have re-downloaded the software several times but always end us with the same error message at the final stage of installation. What can I do to correct this? OS Mountain Lion 10.8.2

if you have no other cs6 programs installed, run the cleaner to remove your installer database: http://www.adobe.com/support/contact/cscleanertool.html
then try re-installing.

Oracle 8.1.6 for NT installation error

Similar Messages

Maybe you are looking for