Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1
I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
Please Help !!!!!
Hi,
I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.
Similar Messages
-
Oracle 10g problem on win 2000 server!!
Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot.. -
Problem installing Oracle 9i database entreprise edition on win 2000 server
Hi,
I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
"Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
Could somebody help...........
Thanks in advance.
Mayahi,
try to install service pack for windows 2000 and try. -
What i need to have to run oracle 10g on win 2000 server.
hi,
I want to install oracle 10g on win 2000 server,what should I need to do to install oracle 10g.
thanks Alok kumarHi...
Try check http://tahiti.oracle.com
There are complete documentation and also installation guide for Windows where pre-requisites are included. -
New Install Win 2000 Server ORA-12560 : TNS : Protocol Adapter Error
I am trying to learn Oracle.
I get the following when logging into SQL*Plus.
ORA-12560 : TNS : Protocol Adapter Error
I have just installed New Install Win 2000 Server and then Oracle 8i for Win2k
nullStep 1 - from a command line on the database machine, enter 'lsnrctl status' and report the output
Step 2 - display the contents of the %ORACLE_HOME%\network\admin\tnsnames.ora file on the machine running sqlplus.
These are the first two stepo, whether on the database machine or in a traditional client-server configuration. -
Install Oracle 8i Personald Edition on Windows 2000 Server SP2
Hi
I have problem to install the Oracle 8i Personal Edition on
Windows 2000 Server SP2.
I run the Setup.exe, I become the message (not exactly) “JRE
(Java Runtime Environment) was not found…… please visit
www.javasoft.com….. and install JRE version 1.1.7 or higher…”
Now, I have download and install this JRE (JavaTM 2 Runtime
Environment v 1.2.2_008 / Internationalized version of Java 2
Runtime Environment).
The error-messages comes again.
Have everyone a idea?hi phill...
why dont you try it out with the same CD and increase your RAM
by another 64MB? This will be enough. The reason is , most
Oracle 8i releases are combined with a java based Oracle
Universal Installer. This requires some good amount of RAM. Just
try it out with some extra memory. If this also didnt work, then
send in the problem,error with your system config. This will
help me in solving your problem.
Imran. -
Oracle 8i Client running on Windows 2000 Server
Hi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mkaHi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mka -
Microsoft Remote Desktop for Mac and Win 2000 Server
Hello guys,
Could you please confirm that the latest version 8.0.15 is compatible with WIN 2000 Server connections? If not, could you please advise which version of Microsoft Remote Desktop for Mac is the match in order to connect to a WIN 2000 server.
Thank you in advance,
BogdanHello Bogdan
WIN 2000 is supported. See a complete list of supported Windows SKUs here:
https://technet.microsoft.com/en-us/library/dn473006.aspx
Go to the AppStore and download Microsoft Remote Desktop. -
How to send STRG+ALT+DELETE throug ARD to a Win 2000 Server
Hello,
Just stuck, how do I send STRGALTDELETE through ARD via VNC-connection to a Win 2000 Server?
Had to restart the machine, but cannot log in now. Thanks for your help.
Jochensame basic answer, but I'd recommend JollysfastVNC if you go the VNC route:
http://www.jinx.de/JollysFastVNC.html
Or CoRD instead of Microsoft's RDC for Mac
http://cord.sourceforge.net/
The CoRD/RDC is the route I'd go, by the way, since it works very well. It's one thing MS has included with Windows which Apple should have years ago. -
Oracle 9i release 2 for Win 2003 Server 32 bit
From the Oracle download site, do I need to download Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP 32 bit before administering the Release 2 for Win 2003 Server. (approx. 180 Meg)
Interesting. I've been using APEX 3.2 with Firefox 3.5 for several months now without any issues and I know several other developers doing the same. Can you test it from another client machine to see if it's something with the PC or the install of Firefox? You might also try [a href="http://portableapps.com/apps/internet/firefox_portable"]Firefox 3.5 Portable[a], as it will basically give you a clean, fresh install of 3.5 without uninstalling your current 3.5. Just make sure you close all instances of Firefox before you start up the portable one.
On a totally unrelated note, just wanted to make sure you know the 9.2 is no longer a supported database (unless you pay for extended support) and the upcoming 4.0 release of APEX will not work with 9.2 at all.
Tyler Muth
http://tylermuth.wordpress.com -
Oracle 8.1.7 on Win 2K Server DC
I installed an 8.1.7 Enterprise Edition version of Oracle 8i on Win 2K Server DC.
At the first moment, I ran SQLPlus and there was no errors. Now, when I try to execute SQLPlus again, the following errors are displayed:
ORA-01034: Oracle not available.
ORA-27101: Shared memory realm does not exist.
At the installation process, the database was created by default.
Any ideas?Your Oracle instance is not running. Start it in SVRMGRL, in the command prompt window:-
SVRMGRLSVRMGR>connect internal
Connected.
SVRMGR>startup
SVRMGR>Oracle instance started etc...
SVRMGR>quit
As to why it's not starting, I have installed Oracle on many Windows NT and 2000 servers, and this happens where the Server is a PDC, I have no idea why.
You can execute the above as a script from autoexec to ensure that the database is running, but I'm sure there's a better way to fix it.
I installed an 8.1.7 Enterprise Edition version of
Oracle 8i on Win 2K Server DC.
At the first moment, I ran SQLPlus and there was no
errors. Now, when I try to execute SQLPlus again, the
following errors are displayed:
ORA-01034: Oracle not available.
ORA-27101: Shared memory realm does not exist.
At the installation process, the database was created
by default.
Any ideas? -
Universal Installer refuses to run on Win 2000 Server P-II
Hello,
I've seen this problem all over but some people tell me it should only happen with P4 chips? As soon as I plop the 9i install CD into the drive, it auto runs and I click INSTALL. Within a couple seconds, I get a message:
"The Java Runtime Environment was not found at c:\docume~1\admini~1\locals~1\temp\orainstall\jre\bin\jrew.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or greater and try again."
I had this problem on an existing server so I did a BRAND NEW installation of Windows 2000 Server and then applied SP3. Still same problem. The processor is a PII-366. What could be wrong?
I've followed all the steps I have found so far:
I've tried copying the install disks to the hard drive.
I've tried renaming the symcjit.dll files (all of them).
I've made sure that all the files are not read only (since they came off of
the CD-R)
I've tried downloading various versions of the JRE (from 1.1.8 to 1.4)
I've read the installation .PDF included on the CD.
Thanks for any suggestions.
...BradHi Raghavan,
Have you applied Services Pack 4 to your WIN 2K SVR installation? If not please do so. After Installation of Oracle 8i you should update the listener.ora (found under ...\<oracle home>\ora82\network\ADMIN). For further details check Oracle installation guide.
Cheers,
Ravi -
Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional
Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
ZurvaanYes, of course. Both versions works but you have to be prepared for lots of RAM.
-
Problem Installing Oracle 8.0.5 on Windows 2000 Server (SP2)
When i trying to install Oracle 8.0.5 on Windowns 2K Server
(with SP2), after migration from NT4, the process the
installation stop (CD, screen) when load DLLs Oracle, without
msg error.
(I Know Oracle 8.0.5 is pretty old, but...i have).
I'm not sure what the problem is. Any help/commands/how to
would be great? If anybody has any idea of why I am experiencing
this problem, I would appreciate the help.
Thanks,
MJPDon't install SP2 on Win2k.
Reinstall Win2K without SP2.
Alex. -
IMQ Broker Not Shutting Down on Win 2000 Server Re-boot
I am using a Windows 2000 Server and have found that during a re-boot the Broker Service (3.5 SP1) is not shutting down completely. The following lines are missing from the log entry created when restarting the server: -
[17/Aug/2004:12:55:55 BST] [B1093]: Shutdown requested by broker administrator
[17/Aug/2004:12:55:55 BST] [B1047]: Shutting down broker...
[17/Aug/2004:12:55:55 BST] [B1077]: Broadcast good-bye to all connections ...
[17/Aug/2004:12:55:55 BST] [B1078]: Flushing good-bye messages ...
[17/Aug/2004:12:55:55 BST] [B1063]: Done
[17/Aug/2004:12:55:55 BST] [B1048]: Shutdown of broker complete.
[17/Aug/2004:12:55:55 BST] [B1066]: Closing: [email protected]:1108->admin:1074. Count=0
[17/Aug/2004:12:55:58 BST].
If the Broker service is manually stopped through Services the entries are placed into the log file.
The problem being created is the broker lock file is not cleared when service is not shutdown completely and when the server is restarted the broker service is then unable to launch as it believes an instance of the service is already running. When the lock file is deleted the broker service can be started.
Has anyone experienced this problem before and found a solution?
If any further information is required in this log then please update with required details.
Many thanks in advance.
Dave.Thanks Joe,
Please read to the end. Thanks to your suggestions I believe I have found the cause of the IMQ Broker problems I was experiencing.
As you suggested by adding the line: -
imq.hostname=257s-bs1a
to the end of the IMQ config.properties file this seems to have worked around the problem shutting down and restarting the IMQ Broker.
Following numerous server restarts the IMQ Broker Service had restarted with Windows successfully. However, I was unable to successfully access the Data Distribution Page.
Further investigation showed the server was using a leased IP address and not static.
I removed the 'imq.hostname' line added earlier and changed the server IP address to static. When the server was rebooted I found the IMQ Service had started successfully. On several successive re-boots the IMQ Broker service restarted with Windows correctly.
To check if this was related to having a dynamic IP address of the server was changed back to Dynamic. Following the first re-boot of the server IMQ had started successfully. On the second re-boot of the server with Dynamic IP the IMQ Broker service did not restart. Following additional re-boots with a dynamic IP address the IMQ Broker service did not restart.
With the IP address changed back to static the server was re-booted. Following the first re-boot the IMQ Broker service had not restarted. Following subsequent re-boots with a static IP address the IMQ Broker service did restart.
Thank you Joe for pointing me in the correct direction.
Regards,
Dave.
Maybe you are looking for
-
I keep being asked to agree to the terms of the Itunes license after which it does not open?
-
How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!
-
How can I block the autoplaying videos in this webpage?
On right column of this webpage ([http://www.wenxuecity.com/news/2015/03/11/4096330.html]), there is an autoplaying video, which I outlined in a red box. (You might need to refresh one more time for the video appears, as the website sometimes play fl
-
How Do i disable ""enable advance Printing features on windows server 2008 ""
Hi , I have a windows server 2008 which is used as a terminal server . Users at remote locations log on to this server via "" DYNDNS"" to user our ERP and company files. We use ""DOT MATRIX PRINTERS "" to print . As we all know that ""enable advanc
-
XSQLActionHandler extracting XML from ViewObject not displaying on XSQL pag
I have the following XSQLActionHandler for a STRUTS project which is supposed to extract the XML from a view object. When I call this from a xsql page I get nothing. I have examined the Node (n) and have seen that it does get XML but after I assign i