Oracle 8.1.6 on win2k datacentre

Hi there!
We have developed a software(2 tier architecture)using PB6.5.1
on win95,98 and Oracle7.3 on Unix server. We are planning to
upgrade the software to Oracle 8.1.6 and also change are OS to
Win2k datacentre. Can anyone tell me , if Oracle 8.1.6 supports
win2k.Would really appreciate a reply asap. Have to give a
feasibilty study report to the client.
Thanks,
Shalini
Tata Infotech Ltd.
India

Oracle 8.1.6 is not certified on windows XP.
Even if yes, it msut be Windows XP Pro.

Similar Messages

Upgrade Oracle 9.2 in 32bits(WIN2K) into Oracle 10G in 64bits(WIN2K)

Hi,
I want to upgrade Oracle 9.2 in 32bits(WIN2K) into Oracle 10G in 64bits(WIN2K) all in 4.6D.
I have installed:
the Oracle 10.2.0.4.0
a central instance with the template CENTRAL.R3S
i started to install the database instance on the target system
with the R3Setup template DBR3CP.R3S
I try to apply the note 932722, I find myself in the same procedure
point 6) c).
The following error message:
Tue Jan 26 21:52:45 2010 - Database service to be upgraded:
        Host = tirudev04
        Port = 1527
        Service = SAPServiceDEV
        ORACLE_HOME = E: \ oracle \ DEV \ 102
Error: Database connection failed to
sys / manager @ / / tirudev04: 1527/SAPServiceDEV
Can you give me some help?
Thank you.

>Service = SAPServiceDEV
This is probably the problem. you have to specify the Oracle network service name of the database you want to upgrade.
SAPServiceDEV is an Windows account name under which the SAP System is started.
Service = DEV will probably do the job.
regards
Peter

Installation Of Oracle 8.1.5 on Win2k machine

Hi,
I am installing Oracle 8.1.5 on a Win2k machine. The configuration of which is as under:
1> IBM X360.
2> iNTEL fOSTER xEON 1.5GHz
3> Dual Processor
4> 512KB Cache
5> 36GB * 3 HDD(RAID5)
6> Windows 2000 Advance Server.
While doing a typical installation, the installation after reaching 85% of the installation it throws an error as below:
ORA-04031:unable to allocate 81968560 bytes of shared memory("shared pool","unknown object","sga heap",db_block_buffers")
The problem was later solved by going for custom installation & giving a smaller sga size i.e. a smaller shared pool size & db_block_buffers.
My question is why the above mentioned error occurred when doing a typical installation on a totally new fresh server? & why after going for a custom installation with lesser SGA Size it worked?
Thanking you.

Hello,
Please repost this question in the appropriate section of the Discussion Forum.
This forum is for general suggestions and feedback about the OTN site.
You can also use our new offering called OTN Service Network:
For Oracle Advice/Minimal Support (fee based) on the Oracle Database Server, Oracle9i Application Server Containers for J2EE (OC4J), Oracle9i JDeveloper, Reports, Forums, SQL*Plus, and PL/SQL, please go to: http://www.oracle.com/go/?&Src=912386&Act=45
For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Regards,
OTN

Upgradtion from oracle 8.1.5 to oracle 8.1.7 on win2k server

hi,
In order to upgrade my database from oracle 8.1.5 to 8.1.7 on same win2k server I performed the following steps but not sure what exactly happened, whether I have upgraded or not:
1. Installed 8.1.5 in e:\oracle\ora815 and test database on same drive, both working fine means I am able to connect to the instance.
2. Installed 8.1.7 on same server but different ORACLE HOME.
3. Ran upgradation script called u0801050.sql from e:\oracle\ora817\RDBMS\Admin. I connected thru connect internal.
4. After running the script, I de-installed Oracle 8.1.5.
5. Then when I ran svrmgrl, instead of oracle 8.1.7, it is still showing 8.1.5, moreover when I connect to sql it does get connected but shows some messages , which I am not sure what they are.
6. In sqlplus, to see which version of oracle is running, I ran select * from v$version;
but there also it is showing, oracle 8.1.5 only.
What I fail to understand is that even after droping 8.1.5, how am I getting 8.1.5 instead of 8.1.7.
below is what I got when I connected to sqlplus:
SQL*Plus: Release 8.1.7.0.0 - Production on Thu Nov 2 22:24:54 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
ERROR:
ORA-06553: PLS-213: Message 213 not found; No message file for product=plsql,
facility=PCM
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-06553: PLS-213: Message 213 not found; No message file for product=plsql,
facility=PCM
Connected to:
Oracle8i Release 8.1.5.0.0 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
SQL> select * from v$version;
BANNER
Oracle8i Release 8.1.5.0.0 - Production
PL/SQL Release 8.1.5.0.0 - Production
CORE Version 8.1.5.0.0 - Production
TNS for 32-bit Windows: Version 8.1.5.0.0 - Production
NLSRTL Version 3.4.0.0.0 - Production
I need urgent help, please.
vip

From metalink note: 188061.1
Upgrading your system to an 8.1.7 patch set from a version earlier than 8.1.6 (for example 8.0.6 or 8.1.5) is not supported. In this case you must either migrate/upgrade to 8.1.7.0 first and then install the patch set, or upgrade/migrate to 8.1.6 and then follow these intructions.

Unable to install Oracle 8i Enterprise edition on Win2k Professional

Hi,
I upgraded windows98 with Win2k Professional.
When i try to install Oracle 8i Enterprise edition from CD on Win2k Professional, i am get the following message:
The Java Run time environment was not found at
../stage/components/oracle/swd/jre/1.1.7/1/DataFiles/Expanded\win32\bin\jrew.exe Hence oracle universal installer cannot be run.
I would appreciate if anyone could get back to me with the easy steps to the above problem.
thanks,
Adem

Try remove installed JRE1.1.8 BEFORE installation of Oracle. May be it can't remove old installation.
PS Check downloaded distrib - some jars may be spoiled.

Problem installing Oracle 8i on Pentium 4 win2k

Trying to install Oracle 8i on a Pentiun 4 win2K mechine and
nothing happen. I am sure there is a work around. Please help

Unfortunately, this is not the right forum to get help on
Oracle8i related issues. Please repost your question in a
database forum.
Best regards,
--OTN Team

Files not found while installing Oracle 9iAS Rel 2 on Win2K

Hello,
When installing Oracle 9iAs Release 9.2.0.1.0 on Windows 2000, the installation pops up windows 'File not found' for a number of files like -
jarfiles.1.4.jar, jarfiles.1.2.jar.
I checked out and the files are not avialable in the installation. The setup disks are proper.
What could be the problem?
Regards,
Mandar

The release date has slipped. We've found some issues which must be fixed before we can release on Windows. Hopefully we will have it soon.
I understand that there is a high level of anticipation. I appreciate everyone's patience.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management.

Installing Oracle i Enterprise Edition on Win2K

Hello:
I want to install 8i on this server. This server had few other products installed like Oracle 6i (Client only) and Jdeveloper on this machine. I have deinstalled these products but I am still getting the following error. What else needs to be removed and how to not get this error. I am choosing DEFAULT_HOME C:/orant when prompted.
I am getting the following error
ERROR: Oracle 8i Enterprise Edition cannot be installed into an existing 7.x or 8.0.x ORACLE_HOME.
Thanks
Rashmi

Enter a different Oracle Home in the first screen of the Universal Installer, with a different directory, and it should work.

How could I find Oracle error msg reference on WIN2K?

Hi there, on Unix we can use 'oerr' to refer to oracle error message reference. On window 2000, what kind of command is the same as 'oerr'?
Thanks
Eric

Long time before I had seen it at http://asktom.oracle.com site the same. Why dont you search there.
http://asktom.oracle.com/pls/ask/f?p=4950:8:1340717954421720453::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:962830039615,
SJH
OCP DBA

Oracle 8i 1.8.7 personal with win2k server

Hi,
I am tried to intall oracle 8i personal at my win2k server. but, for somehow, the installation terminated when it gets to 46%. does anyone knows what happen???
thanks!
Steve

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Steve Hsu ([email protected]):
Hi,
I am tried to intall oracle 8i personal at my win2k server. but, for somehow, the installation terminated when it gets to 46%. does anyone knows what happen???
thanks!
Hi!
If you have not installed yet and if your machine is a PIV, then check out this info at "http://technet.oracle.com:89/ubb/Forum1/HTML/003627.html"
goodluck
Steve<HR></BLOCKQUOTE>
null

Oracle Spatial and Oracle Forms

Hi,
Does anyone have experience with Oracle Spatial and Oracle Forms?
I have generated a form, which is based on a view. The view uses the mdsys.sdo_relate operator. Somehow I am unable to get the form to perform (to get one record it takes over 20 minutes). While useing sql-navigator to process the same statement it seems no problem. The query that also uses the view, is then processed in 10 seconds.
I also noticed that when text-functions like ' lower' of ' upper' are used to query the view, the query is processed within 15 seconds. If I don't use ' lower' or ' upper' it takes a long time (> 20 minutes) to process the query. Is it possible that this causes the bad performance of the form?
On metalink I have found that forms and spatial do not cooperate because of the pl/sql version that
forms6 uses. There is no solution presented, does anyone know of a work around?
My configuration is:
Oracle 8.1.7 on WIN2K @ PIII-800Mhz 256 Mb memory.
Formsbuilder 6
If requested I can post the queries that I have made.
With regards,
Gerjan Walrecht
[email protected]
null

Hello Priya,
Look into the following.
1. Book - Pro Oracle Spatial for Oracle Database 11g by r. Kothuri, A. Godfrind, E. Beinat. This book provides a nice introduction on Oracle Spatial concepts and have examples.
2. Look at the Oracle Spatial & Graph User Guide
2. Book - Applying and Extending Oracle Spatial by S. Greener and S. Ravada. This book provides hands on information for advanced oracle spatial application developers. Practical guide on hands-on examples, Data models and develop cross-vendor database solutions.
3. This oracle spatial forum, once you understand these concepts.
In the future consider Certification on Oracle Spatial 11g Certified Implementation Specialist.
Best
Navaneet

Register database problem (oracle 8.1.6) on Linux 6.2

I'm unable to register my database using RMAN. I'm using Oracle 8.1.6 on Redhat Linux 6.2 (glibc - 2.2.14-5.0). Is there any known bug in Oracle 8.1.6 / rman on Linux 6.2.
These are the steps I followed:
1. Create rman Tablespace
=============================
create tablespace TS_RMAN
datafile '/u01/orauser/oradata/mydb/TS_RMAN.dbf'
size 5M
autoextend on;
2. Create rman user
=============================
create user rmanusr identified by rmanusr
default tablespace TS_RMAN
temporary tablespace TEMP
quota unlimited on TS_RMAN;
3. Grant roles to rman user
==================================
grant connect, resource,recovery_catalog_owner to rmanusr;
4. I'm logging on the server directly
$rman target system/manager catalog rmanusr/rmanusr
5. RMAN> create catalog tablespace TS_RMAN
.... catalog created!
6. RMAN> register database;
... gives me all these errors messages >>
RMAN> register database;
RMAN-03022: compiling command: register
RMAN-03023: executing command: register
RMAN-08006: database registered in recovery catalog
RMAN-03023: executing command: full resync
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-07005: error during channel cleanup
RMAN-07004: unhandled exception during command execution on channel default
RMAN-10032: unhandled exception during execution of job step 1:
RMAN-10031: ORA-65535 occurred during call to DBMS_BACKUP_RESTORE.DEVICESTATUS
RMAN-03008: error while performing automatic resync of recovery catalog
RMAN-07004: unhandled exception during command execution on channel default
RMAN-10032: unhandled exception during execution of job step 1:
ORA-01403: no data found
RMAN-10031: ORA-65535 occurred during call to DBMS_BACKUP_RESTORE.GETPARM
------ end of message -------
Actually I followed the same steps in my own PC with Oracle 8.1.7 on Win2k, It worked!!

Hello,
Narender,you have to include DISPLAY in your .bash_profile and set to your hostname, somewhat like this DISPLAY=hostname:0.0
or read the installation guides, installation of Oracle 8.1.6 in RHL 6.2 is straight forward.

Oracle download for Oracle 8.1.7 enterprise edition

Hi,
From where can i download Oracle 8.1.7 for win2k. Need it ASAP. Please reply.

I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
OTN

Advanced Networking Option over Win2K

I had high hopes for getting Oracle's Kerberos working over Win2K seamlessly, but the Oracle Advanced Networking Option only had information on using Kerberos over UNIX. With Win2K it wasn't apparent where even to begin. I have Enterprise 8i installed and a licensed Advanced Networking CD which I installed on both client and server, but I don't know where to begin to configure Kerberos for Oracle over Win2K. Anybody out there doing this?

Martin Trzaskalik (guest) wrote:
: Im am currently evaluating Oracle8 Release 8.0.5.0.0 -
: Production on Linux.
: I would like to use encryption for the communication of a
: remote client with the server.
: I therefore activated encryption on the client:
: SQLNET.ENCRYPTION_TYPES_CLIENT= (DES, RC4_40, DES40, RC4_56,
: RC4_128)
: SQLNET.ENCRYPTION_CLIENT = required
: After that any connection to the server failed with:
: ORA-12657: No algorithms installed
: So far I have used no sqlnet.ora on the server. So I created
: one and added:
: SQLNET.ENCRYPTION_TYPES_SERVER= (DES, RC4_40, DES40, RC4_56,
: RC4_128)
: SQLNET.ENCRYPTION_SERVER = requested
: After that any atempt to connect to the db from any host
: lead to:
: ORA-12649: Unknown encryption or data integrity algorithm
: I think that I have installed the full distribution provided by
: oracle. So my question is:
: Are there any encryption algorithm shipped with this
: distribution, and if so, how do I use them?
: I should add that I am an Oracle newbie.
: Martin
Oracle8 for Linux is at the moment avlaible only in the standard
version. To use the andvanced networking option you need
the Enterprise Edition or Oracle8i. At the moment these products
aren't available for Linux. You'll have to wait for their release.
Stefan
null

Why 9ias WIRELESS seems to be a PANDORA BOX ??

hi:
In release notes of my 9ias downloaded documents it says that i have 9ias 1.0.2.2.2
I've installed Enterprise Edition but i've choose just to configure after instalation forms and reports services.
What the hell i need to put 9ias Wireless working ?
I've follow the docs that say that i would have to configure jserv.conf, httpd.conf, jserv.properties, zones.properties, etc! I've configured them well. But i dont have the WIRELESS SCHEMA created on the database. My database is Oracle 9i and OS os Win2k Server.
How can I invoke the Wizard or run the scripts for my Wireless Schema?
I also denoted that technet as a new version called 1.0.2.2.2a (look there's a letter in the end... may be it means that was built in the (a)FTERNOON and the 1.0.2.2.2 in the morning...)
I would like to know WHAT DO I REALLY NEED to put 9ias WE working (acka:portal-to-go ... may be should be called portal-to-leave)
I'm desperatelly needding help!
By the way, the thing that i hate most in Oracle is the null documentation! sorry Oracle guys... it's true. jdev, 9ias, etc lacks of docs in some important areas!
Thankx in advance.
NOTES:
My http server is in 9ias home ISUITES
My oracle9_home deafault http server is de-activated (as recommended)

MY SERVER INFO'S:
windows 2000 server
oracle 9i c:\oracle\ora99
oracle 9ias c:\oracle\isuites (1.0.2.2.1)
MY CONFIGURATION FILES INFORMATION
httpd.conf
<IfModule mod_alias.c>
Alias /jservdocs/ "C:\ORACLE\iSuites\Apache/Jserv/docs/"
Alias /soapdocs/ "C:\ORACLE\iSuites/soap/"
Alias /icons/ "C:\ORACLE\iSuites\Apache/Apache/icons/"
# ALIAS FOR WIRELESS
Alias /portal/ "C:\oracle\iSuites\panama/server/portal/"
Alias /papz/ "C:\oracle\iSuites\panama/server/papz/"
Alias /ptgdoc/ "C:\oracle\iSuites\panama/doc/javadoc/"
jserv.conf
# Mount point for Servlet zones
ApJServMount /servlets /root
ApJServMount /servlet /root
ApJServMount /dms1 /root
ApJServMount /ptg /root
jserv.properties
wrapper.classpath=C:\ORACLE\iSuites\Apache\jdk\lib\tools.jar
# WIRELESS after tools.jar as sugested in doc A86701
wrapper.classpath=C:\ORACLE\iSuites\panama\server\classes
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\panama.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\panama_core.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\panama_portal.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\panama_papz.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\client.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\server.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\caboshare-opt.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\marlin-opt.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\ocelot-opt.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\share-opt-1_1_7.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\tecate-opt.zip
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\regexp.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\sax2.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\activation.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\mail.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\ldap.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\ldapbp.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\providerutil.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\sdoapi101.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\sdovis.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\MapQuestX.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\MQJavaCore.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\RoutingJServerClient.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\jai_codec.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\jai_core.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\jpeg_codec.jar
wrapper.classpath=C:\ORACLE\iSuites\panama\lib\ordimimg.jar
# end WIRELESS
wrapper.classpath=C:\ORACLE\iSuites\Apache\Jserv\ApacheJServ.jar
wrapper.classpath=C:\ORACLE\iSuites\Apache\Jserv\dms2Server.jar
wrapper.classpath=C:\ORACLE\iSuites\Apache\Jsdk\lib\jsdk.jar
zone.properties
# List of Repositories
repositories=C:\ORACLE\iSuites\Apache\Jserv\servlets,C:\ORACLE\iSuites\panama\server\portal,C:\ORACLE\iSuites\panama\server\papz
# Startup Servlets
servlets.startup=oracle.panama.ParmImpl
# Servlet Aliases
servlet.rm.code=oracle.panama.ParmImpl
If anyone can help... please help.

Oracle 8.1.6 on win2k datacentre

Similar Messages

Maybe you are looking for