Oracle 8.1.6 Release 2 fails on Linux 7.2
Can somebody help me in guiding me how to install Oracle 8.1.6 Release 2 Enterprise Edition for Linux on Red Hat Linux 7.2?
I have followed the step-by-step instructions from the book
"ORACLE 8i for Linux Starter Kit by Steve Bobrowski".
The ISBN for the book is : 0070435738 (0-07-043575-8)
When run the runInstaller from the terminal it says please wait and nothing happens what so ever. Am I missing anything to do if so please guide me.
Thanks a ton in advance.
Bye,
Sincerely,
Ramanujam S. Paravastu.
I have a similar problem. I Tried all sorts of permutation combination after having failed to install as your case. I even tried to install JDK1.1.6 but was not sucdessful in installing J.D.K 1.1.6 as I am a novice on Linux platform and am very much keen to have an experience of Oracle on Linux. Actually after downloading JDK1.1.6 I was unable to install it on Linux as I said I am a novice . TRY THIS OUT IT MIGHT WORK!!!!!! If you are able to do so please let me know
Bye Buddy
Samiran Shee
[email protected]
Similar Messages
-
Hi all,
I am trying for RAC 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services Release 1 (10.1.0.2).
Machine details are as follows:-
Node 1:
Computer Name: RAC1
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.65
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Node 2:
Computer Name: RAC2
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.181
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.12
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I have made following entries in Hosts file of both the machines:-
192.168.1.65 RAC1
192.168.1.181 RAC2
10.10.10.11 RAC01-PRIV
10.10.10.12 RAC02-PRIV
192.168.1.201 RAC01-VIP
192.168.1.202 RAC02-VIP
I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
================================================================================================================
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac01-priv rac1
node 2: rac2 rac02-priv rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
RAC1 service OracleCSService in improper PENDING state, err(997)
RAC2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
PRIF-10: failed to initialize the cluster registry
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
===============================================================
I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
Waiting for the respone.
With Regards
Dinesh
[email protected]Hi user478171,
I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
Please advice me
Thanks advances
regards,
IvanR -
Hello,
I'm trying upgrade Oracle Application Server 10g Release 3 (10.1.3) to 10.1.3.5.0. Let me give a background first:
I tried to install Oracle AS 10.1.3 but it ran into error because windows firewall was blocking javaw.exe opmn.exe. I had cancelled the installation. So ORACLE_AS1 failed initiatlly. After i identified the issue i installed ORACLE_AS2. This went through successfully without issues. I'm able to login to BPEL Console. But only after executing opmnctl startall in DOS Prompt. I have installed Windows 7.
Now when I try to upgrade to 10.1.3.5.0 the installer automatically selects destination location ORACLEAS1. I change it ORACLEAS2 where (10.1.3) is installed. After clicking on a next i get and issue as shown in the below link:
[http://www.mypicx.com/09172010/issue/]
Can anyone please help me resolve this issue?Hi,
When i am trying to install OAS 10g R3 on windows7. I am getting the error as:- Not supported OS press enter to exit the setup.
Please help me is there any other way to install.
Thanks in advance. -
Install of Oracle 9.2.0.4 is failing whilst linking ins_precomp.mk - make.log is below.
Please does anyone know how to solve this problem.
Thanks in advance,
Pentti
Red Hat Enterprise Linux AS release 3 (Taroon Update 4)
Kernel 2.4.21-27.0.2.ELsmp on an i686
[oracle9@dell-6650-red-01 install]$ cat make.log
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/app/oracle9
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/app/oracle9
(if [ "compile" = "compile" ] ; then \
/app/oracle9/bin/gennttab > ntcontab.c ;\
gcc -c ntcontab.c ;\
rm -f /app/oracle9/lib/ntcontab.o ;\
mv ntcontab.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/ntcontab
r - /app/oracle9/lib/ntcontab.o
(if [ "compile" = "assemble" ] ; then \
/app/oracle9/bin/gennttab > ntcontab.s ;\
/usr/bin/as -o ntcontab.o ntcontab.s ;\
rm -f /app/oracle9/lib/ntcontab.o ;\
mv ntcontab.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/ntcontab
(if [ "compile" = "oratmp" ] ; then \
/app/oracle9/bin/gennttab > ntcontab.c ;\
/lib/idcpp ntcontab.c oratmp.c ;\
-i oratmp.c -o oratmp.s -f ntcontab.c ;\
/usr/bin/as -o ntcontab.o oratmp.s ;\
rm -f oratmp.c oratmp.s ;\
rm -f /app/oracle9/lib/ntcontab.o ;\
mv ntcontab.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/ntcontab
(if [ "compile" = "binary" ] ; then \
/app/oracle9/bin/gennttab > ntcontab.c ;\
TARGET_BINARY_INTERFACE= ;\
export TARGET_BINARY_INTERFACE ;\
gcc -c ntcontab.c ;\
-rm -f /app/oracle9/lib/ntcontab.o ;\
-mv ntcontab.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/ntcontab
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/app/oracle9
(if [ "compile" = "compile" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.c ;\
gcc -c nnfgt.c ;\
rm -f /app/oracle9/lib/nnfgt.o ;\
mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
r - /app/oracle9/lib/nnfgt.o
(if [ "compile" = "assemble" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.s ;\
/usr/bin/as -o nnfgt.o nnfgt.s ;\
rm -f /app/oracle9/lib/nnfgt.o ;\
mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
(if [ "compile" = "oratmp" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.c ;\
/lib/idcpp nnfgt.c oratmp.c ;\
-i oratmp.c -o oratmp.s -f nnfgt.c ;\
/usr/bin/as -o nnfgt.o oratmp.s ;\
rm -f oratmp.c oratmp.s ;\
rm -f /app/oracle9/lib/nnfgt.o ;\
mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
(if [ "compile" = "binary" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.c ;\
TARGET_BINARY_INTERFACE= ;\
export TARGET_BINARY_INTERFACE ;\
gcc -c nnfgt.c ;\
-rm -f /app/oracle9/lib/nnfgt.o ;\
-mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
/usr/bin/make -f ins_precomp.mk links ORACLE_HOME=/app/oracle9
(cd /app/oracle9/precomp/public ; rm -f SQLCA.H)
(cd /app/oracle9/precomp/public ; rm -f ORACA.H)
(cd /app/oracle9/precomp/public ; rm -f SQLDA.H)
(cd /app/oracle9/precomp/public ; rm -f SQLCA.COB)
(cd /app/oracle9/precomp/public ; rm -f ORACA.COB)
(cd /app/oracle9/precomp/public ; rm -f SQLCA.FOR)
(cd /app/oracle9/precomp/public ; rm -f ORACA.FOR)
(cd /app/oracle9/precomp/public ; rm -f BNDDSC.FOR)
(cd /app/oracle9/precomp/public ; rm -f SELDSC.FOR)
(cd /app/oracle9/precomp/public ; ln -s sqlca.h SQLCA.H)
(cd /app/oracle9/precomp/public ; ln -s oraca.h ORACA.H)
(cd /app/oracle9/precomp/public ; ln -s sqlda.h SQLDA.H)
(cd /app/oracle9/precomp/public ; ln -s sqlca.cob SQLCA.COB)
(cd /app/oracle9/precomp/public ; ln -s oraca.cob ORACA.COB)
(cd /app/oracle9/precomp/public ; ln -s sqlca.for SQLCA.FOR)
(cd /app/oracle9/precomp/public ; ln -s oraca.for ORACA.FOR)
(cd /app/oracle9/precomp/public ; ln -s bnddsc.for BNDDSC.FOR)
(cd /app/oracle9/precomp/public ; ln -s seldsc.for SELDSC.FOR)
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/app/oracle9
(if [ "compile" = "compile" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.c ;\
gcc -c nnfgt.c ;\
rm -f /app/oracle9/lib/nnfgt.o ;\
mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
r - /app/oracle9/lib/nnfgt.o
(if [ "compile" = "assemble" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.s ;\
/usr/bin/as -o nnfgt.o nnfgt.s ;\
rm -f /app/oracle9/lib/nnfgt.o ;\
mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
(if [ "compile" = "oratmp" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.c ;\
/lib/idcpp nnfgt.c oratmp.c ;\
-i oratmp.c -o oratmp.s -f nnfgt.c ;\
/usr/bin/as -o nnfgt.o oratmp.s ;\
rm -f oratmp.c oratmp.s ;\
rm -f /app/oracle9/lib/nnfgt.o ;\
mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
(if [ "compile" = "binary" ] ; then \
/app/oracle9/bin/gennfgt > nnfgt.c ;\
TARGET_BINARY_INTERFACE= ;\
export TARGET_BINARY_INTERFACE ;\
gcc -c nnfgt.c ;\
-rm -f /app/oracle9/lib/nnfgt.o ;\
-mv nnfgt.o /app/oracle9/lib/ ;\
/usr/bin/ar rv /app/oracle9/lib/libn9.a /app/oracle9/lib/nnfgt.o
/usr/bin/make -f ins_rdbms.mk ctx_on ORACLE_HOME=/app/oracle9
/usr/bin/ar cr /app/oracle9/rdbms/lib/libknlopt.a /app/oracle9/rdbms/lib/kc
/usr/bin/make -f ins_rdbms.mk sdo_on ORACLE_HOME=/app/oracle9
/usr/bin/ar cr /app/oracle9/rdbms/lib/libknlopt.a /app/oracle9/rdbms/lib/kx
/usr/bin/make -f ins_rdbms.mk dm_on ORACLE_HOME=/app/oracle9
/usr/bin/ar d /app/oracle9/rdbms/lib/libknlopt.a dmndm.o
/usr/bin/ar cr /app/oracle9/rdbms/lib/libknlopt.a /app/oracle9/rdbms/lib/dm
/usr/bin/make -f ins_rdbms.mk olap_on ORACLE_HOME=/app/oracle9
/usr/bin/ar d /app/oracle9/rdbms/lib/libknlopt.a xsnoolap.o
/usr/bin/ar cr /app/oracle9/rdbms/lib/libknlopt.a /app/oracle9/rdbms/lib/xs
/usr/bin/make -f ins_rdbms.mk part_on ORACLE_HOME=/app/oracle9
/usr/bin/ar d /app/oracle9/rdbms/lib/libknlopt.a ksnkkpo.o
/usr/bin/ar cr /app/oracle9/rdbms/lib/libknlopt.a /app/oracle9/rdbms/lib/kk
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/app/oracle9
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/app/oracle
/app/oracle9/bin/genclntsh
/app/oracle9/rdbms/lib/kpudfo.o: file not recognized: File format not recog
collect2: ld returned 1 exit status
cat: /tmp/clntst9.21070/*.nm: No such file or directory
sort: open failed: /tmp/clntst9.21070/*.objs: No such file or directory
Usage: ar [emulation options] [-]{dmpqrstx}[abcfilNoPsSuvV] [member-name] [
ar -M [<mri-script]
commands:
d - delete file(s) from the archive
m[ab] - move file(s) in the archive
p - print file(s) found in the archive
q[f] - quick append file(s) to the archive
r[ab][f] - replace existing or insert new file(s) into the archive
t - display contents of archive
x[o] - extract file(s) from the archive
command specific modifiers:
[a] - put file(s) after [member-name]
- put file(s) before [member-name] (same as )
[N] - use instance [count] of name
[f] - truncate inserted file names
[P] - use full path names when matching
[o] - preserve original dates
- only replace files that are newer than current archive con
generic modifiers:
[c] - do not warn if the library had to be created
[s] - create an archive index (cf. ranlib)
[S] - do not build a symbol table
[v] - be verbose
[V] - display the version number
emulation options:
No emulation specific options
ar: supported targets: elf32-i386 a.out-i386-linux efi-app-ia32 elf32-littl
Created /app/oracle9/lib/libclntst9.a
[oracle9@dell-6650-red-01 install]$Hi Pentti!
There is a patch for this. Search on MetaLink with "install ins_precomp.mk" and you will find it.
cu
Andreas -
Installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Prof
I have problem in installing Oracle Database 10 G Release 2 on Centos 5.0 and SuSe Linux Professional 9.1.
1. According to information of installation steps given by one user at DIZWELL for Centos 5.0.
In the last step it says as follows (I had bought a CD Centos 5.0) - It gives the following error. My copy of Centos is not a downloaded Zip file.
su - oracle
/osource/runinstaller -ignoreSysPrereqs
Command not found
I had also installed Libaio and Libxp as mentioned in the document given by a user. How can i solve this. I need the complete installation of Oracle 10 G Rel 2 on Centos 5.0.
2. Installation of Oracle 10 G Rel 2 on Novell SuSe Linux Professional 9.1.
I had seen the oui opening up and when it moves a little further it gives some memory error and It requires about 900 + memory. After installing this linux if we have increase the memory What should we do? According to the message it says my system is having only 700+ memory. I do not know whether it is MB/KB. Please given the complete steps to solve this.
Thanks in Advance!
Regards,
Srinivaswas trying to Oracle 10G Rel 2 on Centos 5.0 but There I never got the Oracle Universal Installer.
Now, I had made necessary to Novelll Suse Linux Professional 9.1, where I has made the necessary changes to the system files and installed the libXp, glibc, libaio, make etc and I was able to get Oracle Universal Installer. During Installation at the end I got these errors.
gcc-3.2 Found not found Failed
Overall Result of this check Failed
Kernel Parameters
Semopm=100 found semopm=32 Failed
file-max=65536 Found file-max=52249 Failed
Checking for VERSION-2.6.5-7.97 Found VERSION=2.6.4-52 - default Failed
ip_local_port_range=1024-65000 Found ip_local_port_range=32768-61000 Failed
Check for rmem_default=262144 Found rmem_default=111616 Failed
Check for rmem_max=262144 Found rmem_max-111616 Failed
Check for wmem_default=262144 Found wmem_default=111616 Failed
Check for wmem_max=262144 Found wmem_max=111616 Failed
Recommended glibc VERSION
Expected Atleast= 2.3.3-98.28
Actual = 2.3.3-97 Failed
Overall Result of the above Failed
Checking Physical Memory
Expected = 922 MB
Actual = 500 MB
Please let me know What to do or How to rectify this? Atleast I should be able to install the same in SuSe Linux Professional 9.1. Mine is not a zip file now . I have unzipped and stored my Oracle 10 G Rel 2 on a CD Which was working correctly in SuSe Linux Professional 9.1 but the last step in the Installation in Centos 5.0 did not show the OUI when I had run from the CD. Should I have to configure the Internet for lInux also. I have Broadband internet 256 kbps From hathway Internet. How can i configure Internet in SuSe Linux Professional 9.1, Centos 5.0 and Fedora Core 4. Where can I give my IP Address, Gateway, Primay DNS, Secondary DNS, Email ID and Password, Host Name etc
Somehow, I need to install Oracle 10 G Rel 2 on any one Linux Version for me to work and succeed.Anybody can Help me also.
AFTER RE-INSTALLING CENTOS LINUX 5.0 AGAIN, I HAD REPEATED ALL THE STEPS TAKEN FROM A MEMBER OF ORACLE FORUMS AND THIS TIME, WHEN I HAD GIVEN THE COMMANDS
su - oracle
/osource/runInstaller -ignoreSysPrereqs
THIS TIME IT HAD GIVEN THE ERROR AS FOLLOWS:
PERMISSION DENIED
PLEASE TELL ME WHAT SHOULD BE THE PROBLEM AND HOW TO RECTIFY THIS PROBLEM AND INSTALL ORACLE 10g REL 2 ON CENTOS 5.0 LINUX.
Thanks in Advance
Regards,
Srinivas -
Installation issue- Oracle SOA Suite 10g Release 3 (10.1.3.x)
Hi,
I am installating (basic installation) Oracle SOA Suite 10g Release 3 (10.1.3.x), I have Vista OS. Configuration assisstant ran successfully till (App server, ESB, BPEL prcoess manager) it reached to Web Services Manager. It threw up following error-
BUILD FAILED
C:\product\10.1.3.1\OracleAS_3\owsm\scripts\install.xml:1971: The following error occurred while executing this line:
C:\product\10.1.3.1\OracleAS_3\owsm\scripts\dataload.xml:199: java.sql.SQLException: Internal Error:Invalid Connect String
I have JDeveloper installed on my system. Let me know if you need the log file.
Any help is greatly appreciated.Andre,
I am a newbee in this field and I could not understand your question. Can you please explain? I downloded Oracle JDeveloper to design BPEL processes and trying to install Oracle SOA suite for BPEL process manager, that is where I hit this road block.
Thanks -
HI,
EBS-12.1.3
DB 11gR1
I am Facing following Error: while installing Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL
pwd
pwd
/shared/bishiphome/Disk1/install/linux64
[oravis@erptest linux64]$./runInstaller -ignoreSysPreReqs
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-20_08-52-57AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2011-07-20_08-52-57AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Should i install JRE in the Server
Thanks
Vishwa
Edited by: Vi**** on Jul 19, 2011 10:18 PM
Edited by: Vishwa on Jul 25, 2011 3:30 AMHI,
Change the above to the following and see if you get any error:
$ /shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr/shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-26_08-46-15AM. Please wait ...[oravis@erptest ~]$ Exception in thread "main" java.lang.ClassFormatError: oracle.as.install.engine.modules.install.exception.InvalidInventoryPointerException (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:488) -
How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)
Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete -
Oracle Application Server 10g Release 1 and JDeveloper 10.1.3.2.0
Hi,
One my client have Oracle Application Server 10g Release 1.
Can I do development in JDeveloper 10.1.3.2.0 using ADF and then deploy it on OAS 10g R1.
If can what I should look for so that it can be as smooth as possible.
Regards,
Raj
www.oraclebrains.comhi
Maybe this can help
"Application Servers Supported by JDeveloper"
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/as_supportmatrix.html
success
Jan Vervecken -
Oracle E-Business Suite integration is failing with OSSO
Hi all,
We are integration EBS 12.1.1 with OSSO 10g (OID 10.1.4.3) using txkrun.pl script. This is a production environment and has 2 nodes of OID and 2 nodes of Database in RAC mode. When we run the txkrun.pl script we are getting the below error:
Mon Dec 13 15:06:38 GMT+05:30 2010 SSO database is jdbc:oracle:thin:@ldap://oid_hostName:389/idmprod,cn=oraclecontext
Mon Dec 13 15:06:38 GMT+05:30 2010 Exception while creating database connection :java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at java.sql.DriverManager.getConnection(DriverManager.java:572)
at java.sql.DriverManager.getConnection(DriverManager.java:196)
at oracle.security.sso.SSORegistrar.main(SSORegistrar.java:327)
Mon Dec 13 15:06:38 GMT+05:30 2010 Check if your database is up and running.
The DB is up and running and we are able to telnet the OID ports from EBS machine. Please let me know if anyone has faced this error before.
This is very urgent and appreciate your quick response.
Thanks,
Mahendra.If you are running Oracle E-Business Suite Release 12.1.1 and integrating with OID 11g, you will also need to download and install TXK patch 7651166, which provides several fixes to Applications Technology code, including an update to the Oracle E-Business Suite OID registration scripts that adds support for OID 11g. The patch should be applied to all Oracle E-Business Suite middle tier nodes. This patch is not required if you are integrating with any other version of Oracle E-Business Suite.
Regards,
Prashant. -
Skin Customization in Oracle Identity Manager 11g Release 2 (11.1.2)
I was recently tasked with branding an OIM instance to match pretty stringent branding standards. To accomplish this task, I extended the fusion theme which is provided out of the box into a new custom skin. In the example below, I took the design as far as I could, which required decently advanced css knowledge; however, even a novice web designer could easily make simple updates to the backgrounds and fonts which would also greatly enhance the user experience.
Utilizing FireBug for Firefox, I inspected elements of the OIM interface to see which div's I needed to modify in the css file. You can edit as little or as many elements as you'd like in your custom skin; however, I'd recommend preserving the primary elements original placements to avoid confusion for users that are already used to an out of the box version of OIM.
This is the Oracle doc I used when creating the custom skin: http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#BABJIJIA
Notes regarding the Oracle tutorial mentioned above:
Be sure and remove the temp directory, shut down your OIM server, upload your files, then restart your OIM server with each css modification.
30.3.1 - Configuring Skins: 1. After you create the skin in the trinidad-skins.xml file, make a copy of the trinidad-skins.xml from the /iam-consoles-faces.war/WEB-INF/ directory to the
oracle.iam.console.identity.sysadmin.ear/WEB-INF/ directory AND the
oracle.iam.console.identity.self-service.ear/WEB-INF directory.
(The doc references admin.ear: the fully qualified name of the ear is: oracle.iam.console.identity.sysadmin.ear)
30.3.1 - Configuring Skins: Make all of your changes in the /oracle.iam.console.identity.sysadmin.ear/WEB-INF/trinidad-skins.xml file, /oracle.iam.console.identity.self-service.ear/WEB-INF/trinidad-skins.xml file, and the /iam-consoles-faces.war/WEB-INF/trinidad-skins.xml file.
(The doc doesn't mention making your css edits in the oracle.iam.console.identity.self-service.ear directory which is required)
Here is a link to my blog post with screenshots: http://www.idmworks.com/blog/entry/skin-customization-in-oracle-identity-manager-11g-release-2-11-1-2I was recently tasked with branding an OIM instance to match pretty stringent branding standards. To accomplish this task, I extended the fusion theme which is provided out of the box into a new custom skin. In the example below, I took the design as far as I could, which required decently advanced css knowledge; however, even a novice web designer could easily make simple updates to the backgrounds and fonts which would also greatly enhance the user experience.
Utilizing FireBug for Firefox, I inspected elements of the OIM interface to see which div's I needed to modify in the css file. You can edit as little or as many elements as you'd like in your custom skin; however, I'd recommend preserving the primary elements original placements to avoid confusion for users that are already used to an out of the box version of OIM.
This is the Oracle doc I used when creating the custom skin: http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/uicust.htm#BABJIJIA
Notes regarding the Oracle tutorial mentioned above:
Be sure and remove the temp directory, shut down your OIM server, upload your files, then restart your OIM server with each css modification.
30.3.1 - Configuring Skins: 1. After you create the skin in the trinidad-skins.xml file, make a copy of the trinidad-skins.xml from the /iam-consoles-faces.war/WEB-INF/ directory to the
oracle.iam.console.identity.sysadmin.ear/WEB-INF/ directory AND the
oracle.iam.console.identity.self-service.ear/WEB-INF directory.
(The doc references admin.ear: the fully qualified name of the ear is: oracle.iam.console.identity.sysadmin.ear)
30.3.1 - Configuring Skins: Make all of your changes in the /oracle.iam.console.identity.sysadmin.ear/WEB-INF/trinidad-skins.xml file, /oracle.iam.console.identity.self-service.ear/WEB-INF/trinidad-skins.xml file, and the /iam-consoles-faces.war/WEB-INF/trinidad-skins.xml file.
(The doc doesn't mention making your css edits in the oracle.iam.console.identity.self-service.ear directory which is required)
Here is a link to my blog post with screenshots: http://www.idmworks.com/blog/entry/skin-customization-in-oracle-identity-manager-11g-release-2-11-1-2 -
Oracle 11R2 remote login as sysdba fails
Hello
i cant connect remotely as sysdba from client to server - oracle version SQL*Plus: Release 11.2.0.2.0
the configuration is the following
orapwd file=orapwdTESTDB entries=30 password=mypassword force=y
on the init.ora i have the following
remote_login_passwordfile=EXCLUSIVE
and while going to another server i keep getting the following error message
sqlplus sys/mypassword@testdb as sysdba
SQL*Plus: Release 11.2.0.2.0 Production
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
What else im missing? i had this configuration in oracle 10G and worked fine
thanksDid you ever get this to work? I'm having the same problem. If I remote to the server and log on directly as sys, I can do fine. If I try from my PC, I get the insuff priv error. I can connect to other databases fine from my PC, but not this particular one.
thanks,
Carl -
Oracle Grid Infrastructure 11g Release 2 (11.2.0.3.0)
Hi,
I want to download Oracle Grid Infrastructure 11g Release 2 (11.2.0.3.0) for installation on Oracle Solaris 11 as Oracle Grid Infrastructure 11g Release 2 (11.2.0.1.0) cannot be installed on Solaris 11,
I know its available but cannot find the link to download it, is it not available for download from OTN network ?
If you happen to know the link please let me know or is there a way I can install 11.2.0.1.0 on Solaris 11.
Thank you for you help.
Rgds
Terry11/10/11: Patch Set 11.2.0.3 for Linux, Solaris, Windows, AIX and HP-UX Itanium is now available on support.oracle.com.
You have to ask support to send you the cloud link where you can download the binaries OR you can ask them to send you the media also.
It says right on the above link
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html -
10.1.0.5 Patch for Oracle Application Server 10g Release 1
Hi Guys,
Does anyone know what is the patch number for 10.1.0.5 Patch for Oracle Application Server 10g Release 1?
This is a Oracle Application Server and not Oracle Database server.
I tried searching on Metalink but not able to find it.
Thanks in advance!
Avinash.10.1.0.5 is not a version number for an OAS. It is only a version number for RDBMS.
If you are running OAS 10.1.2.x with the Identity Managmenet/SSO (OID Server), & elected to have it install the Metadata Repository database for you, this was a RDBMS release below 10.1.0.5. The OAS patch to 10.1.2.2 or 10.1.2.3 required the RDMBS be updated to 10.1.0.5 first. This is the standard 10.1.0.5 update for your platform.
use Advanced Search on Metalink
To find the OAS 10.1.2.2 or 10.1.2.3 patch set, search for Oracle Fusion Middleware Server. Release 10.1.2.2 and 10.1.2.3. Look for the decriptions like "PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE" OR "PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2"
To find the RDBMS 10.1.0.5 patch, search for RDBMS Server, Release 10.1.0.5. Look for the Description containing something like "10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER"
The patch number is different per platform, so I can't tell you the exact #s without more info (OS) -
Available Now: Oracle Database Lite 10g Release 1
The Oracle Database Lite development team is pleased to announce the availability of Oracle Database Lite 10g (10.0.0.0.0) for Windows 2000/XP, Solaris 2.6, 2.7, 2.8, and Red Hat Enterprise Linux AS/ES 2.1/3.0 platforms.
The Windows release is currently available from OTN at:
http://www.oracle.com/technology/software/products/lite/index.html
Oracle Database Lite 10g is a complete and integrated solution for rapid development and deployment of high impact, mission vital applications for mobile and lightweight embedded environments. Oracle Database Lite is an extension to Oracle Database 10g for enterprises wanting to increase productivity, reduce operational costs, and improve customer satisfaction.
Oracle Database Lite uses data synchronization to reliably and securely exchange data between a corporate Oracle Database and mobile workers. Oracle Database Lite also allows companies to deploy and manage users, mobile applications and devices from a remote central location. Oracle Database Lite provides the necessary framework enterprise customers need to extend their enterprise applications and data to the most popular mobile platforms: Palm OS, Linux, Microsoft Windows CE/PPC, and Microsoft Windows NT/2000/XP/UNIX.
The following is a partial list of new features for Oracle Database Lite 10g that will make your mobile deployment easier to manage, use, and develop. A complete list will be available for download/viewing soon.
Device Management
As the number of mobile devices in an enterprise increases, it becomes more important to have complete control of the devices. Oracle Database Lite Device Management is a complete infrastructure to monitor and manage Oracle Database Lite assets such as database files, software libraries, data, and application files on remote devices. Device management decreases the total cost of ownership and protects an enterprises intellectual property.
Single Oracle Lite Binary
The Oracle Database Lite 10g release contains a single set of Oracle Lite database kernel binaries for all languages, removing the necessity of having different binaries for each of the following languages: Korean, Traditional Chinese, simplified Chinese, Japanese, and US/European languages.
Shared Map
The shared map function greatly improves performance by reducing sync processing timeand enhances the scalability of shared publication items. Shared maps allow users to share record state information and reduce the size of the resulting replication map tables.
Offline Instantiation
Offline instantiation enables quick and easy setup of mobile devices for business applications. Mobile administrators are able to prepare, in batch mode, a client package, which includes the mobile client software and initial data for every mobile user. This procedure helps users avoid an expensive online synchronization processes as part of the first time mobile client setup procedure.
Synchronization Manager
The Synchronization Manager is a complete, web-based enterprise management application to manage and monitor synchronization. The Synchronization Manager allows administrators to manage the synchronization service, monitor and analyze sync performance, administer the configuration, trace synchronization history, display and browse synchronization publication and subscription information, and monitor MGP (Message Generator and Processor) performance.
Oracle Application Server Support
The Oracle Database Lite 10g Mobile Server now runs as a web application on Oracle Containers for Java (OC4J) the runtime of Oracle Application Server. If Oracle
Database Lite 10g is deployed in standalone mode, an embedded version of OC4J will be installed and used. Oracle Database Lite may also be installed against an existing instance of Oracle Application Server.
Seamless upgrade from Oracle9 i Lite 5.0.2
The Oracle Database Lite 10g Upgrade Assistant allows customers to easily upgrade from existing Oracle9 i Lite 5.0.2 installations. The Upgrade Assistant automatically converts existing application definitions to the new format, and copies all relevant files to the new installation. As many customers have deployed mission critical systems using Oracle9i Lite technology, the Upgrade Assistant has been designed to minimize system downtime.
Download
Oracle Database Lite 10g (10.0.0.0.0) for Windows can now be downloaded from the following location.
http://www.oracle.com/technology/software/products/lite/index.htmlI am using Oracle 10g lite. Do you know if it supports silent installation.
Maybe you are looking for
-
There aren't really any more details to add. I have checked everything I can think of in the Library folder and thrown out anything I thought might affect it. Firefox is not set as my default browser. I have read many threads of people having this pr
-
Is there a way to backup all my systems settings with Time Machine? How about for those non apple apps, is there a place where all system settings, application settings, and preferences are stored? Perhaps the Apple Migration wizard could help?
-
Unable to run the oracle Process Manager service
Unable to run the services of 1) oracle Process Manager service(EPM_epmsystem1) 2) Oracle Process Manager (ohsInstance1649849633) error message is displayed as below. Error 1053 the service did not respond to the start or control request in timely fa
-
I Tunes, I have tried to install this program for 2 days.
I have been trying for 2 days to install i Tunes on a WIndows Vista Home Premium 64 bit laptop. All updates current, have never had so much as a hiccup with this laptop. I have received one error after the other, Error 4204, was the first. I read all
-
I have a higher end 13" MacBook Pro running OSX Snow Leopard 10.6.8 that I purchased in August of 2010. About a month ago, I was using iMovie to edit a project when all of a sudden it started responding extremely slowly. Like, near impossible to work