Oracle 8.1.7.2.1 upgrade to Oracle 9

Oracle 8.1.7.2.1 upgrade to Oracle 9
I'm doing a manual migration to Oracle 9
When I do a shutdown immediate, and use the datafiles to do a clone, I find the database is not consistent when I do a Startup Migrate.
Is this a problem with this version of Oracle 8? Startup migrate will not let me do a open resetlogs...anyone got any suggestions thanks

Jeremy
From your question
- "Is this a problem with this version of Oracle 8? Startup migrate will not let me do a open resetlogs" -
what I guess you are doing is after cloning, you have tried starting Oracle using the same old Oracle 8.1.7 home. You need to make sure that that you change your oracle home to the new 9i home after you have cloned your files.
Also ensure that all required parameters are changes in the initialisation parameter (e.g COMPATIBLE) and those that relate to directories have changed to new. Also that all orace ENV (ORACLE_HOME, PATH, ORA_NLS33, LD_LIBRARY_PATH) point to the new 9i home.
Then try the STARTUP MIGRATE and run the upgrade script.

Similar Messages

Installation of Oracle Interim patches (CPU) prior to upgrade to Oracle 10g

Hello Gurus,
We will be upgrading our Oracle 9i database to Oracle 10G. One of the requirements is to have version Oracle 10.2.0.2 and may need to apply the CPUJAN2008 interim patches. My question is would it be safe to pre-install everything (Oracle Patch set + CPUJAN2008) before I do the upgrade?
Best rgds,
Jun

Hi,
A dicussion about similar question can be found on the following thread:
Re: Oracle 10g Problem
you have to check the last posts

Slow running query after upgrading to Oracle 10.2.0.4

Hello
I had posted a query in Database Upgrade section , but all in vian as i have had no replies . So i am posing this in general section as i can now confirm with the exact query issue .
1. I upgraded my oracle instance windows 64 bit from 10.2.0.1 to 10.2.0.4
2. All is good except when i use SUM or MAX in queries i get a very slow performance below is the complete example
Your help is much appreciated .
Regards
Harshad
=====================================================================================================
Example.
=====================================================================================================The query runs on a single table of 275,000,000 records, partitioned by Feed_Id in 53 partitions:-
SELECT *
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
This returns 18 rows in sub-second response time.
Explain Plan for it:-
SELECT *
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
Statement Id=3 Type=INDEX
Cost=938 TimeStamp=11-06-09::11::25:55
(1) SELECT STATEMENT ALL_ROWS
Est. Rows: 66 Cost: 940
(4) PARTITION RANGE SINGLE
Est. Rows: 66 Cost: 940
(3) TABLE TABLE ACCESS BY GLOBAL INDEX ROWID RDS.FACT_LIFE [Analyzed]
Blocks: 2,765,931 Est. Rows: 66 of 275,979,985 Cost: 940
(2) INDEX INDEX SKIP SCAN RDS.PIX_FTLE_1 [Analyzed]
Est. Rows: 3 Cost: 938
However, when the query employs an aggregate function:-
SELECT MAX(Cap_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
This takes anything from 200-400 seconds to return.
Explain plan for it:-
SELECT MAX(CAP_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
Statement Id=3 Type=PARTITION RANGE
Cost=7 TimeStamp=11-06-09::11::26:50
(1) SELECT STATEMENT ALL_ROWS
Est. Rows: 1 Cost: 7
(5) SORT AGGREGATE
Est. Rows: 1
(4) FIRST ROW
Est. Rows: 66 Cost: 7
(3) PARTITION RANGE SINGLE
Est. Rows: 66 Cost: 7
(2) INDEX INDEX RANGE SCAN (MIN/MAX) RDS.PIX_FTLE_1 [Analyzed]
Est. Rows: 66 Cost: 7
However when the query is run with a different Life_Id for the same partition:-
SELECT MAX(Cap_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555275
AND Feed_Id = 2;
Returns sub-second.
Explain plan for it:-
SELECT MAX(CAP_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555275
AND Feed_Id = 2;
Statement Id=3 Type=PARTITION RANGE
Cost=7 TimeStamp=11-06-09::11::29:29
(1) SELECT STATEMENT ALL_ROWS
Est. Rows: 1 Cost: 7
(5) SORT AGGREGATE
Est. Rows: 1
(4) FIRST ROW
Est. Rows: 66 Cost: 7
(3) PARTITION RANGE SINGLE
Est. Rows: 66 Cost: 7
(2) INDEX INDEX RANGE SCAN (MIN/MAX) RDS.PIX_FTLE_1 [Analyzed]
Est. Rows: 66 Cost: 7
Is this a problem with b-tree indexes? The Life_Id is allocated from a sequence and there are 67,535,682 rows in the partition. The stats are up to date.
=====================================================================================================
=====================================================================================================

Hello Randolf,
Sorry for the late reply was down with flue and could not mail , as mentioned i below is the DDL for PIX_FTLE_1 & PIX_FTLE_2 . I have used TOAD to extract the script.
As i cant send the both the DDL in single post i will send it in 2 post , There is a limit of 30000 characters in sigle post .
Thanks once again for your help .
Regards
Harshad
CREATE INDEX RDS.PIX_FTLE_1 ON RDS.FACT_LIFE
(FEED_ID, CAP_PERIOD_ID, LIFE_ID, ISO_CURRENCY_ID, LIFE_SCD_ID)
TABLESPACE RDS_TABLESPACE01
INITRANS 2
MAXTRANS 255
LOGGING
GLOBAL PARTITION BY RANGE (FEED_ID) (
PARTITION HA1 VALUES LESS THAN (2)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 1225M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU6 VALUES LESS THAN (3)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 2761M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION FP1 VALUES LESS THAN (4)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 971M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION PRU VALUES LESS THAN (5)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 993M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION GAC VALUES LESS THAN (6)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 622M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU3 VALUES LESS THAN (7)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 2136M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION LEG VALUES LESS THAN (8)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 847M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RSC VALUES LESS THAN (9)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 144M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SW1 VALUES LESS THAN (10)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 80M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION PRI VALUES LESS THAN (11)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 34M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION BAL VALUES LESS THAN (12)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 128M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NA1 VALUES LESS THAN (13)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION MID VALUES LESS THAN (14)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION EGS VALUES LESS THAN (15)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION ARK VALUES LESS THAN (16)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 1088M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SKA VALUES LESS THAN (17)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 136M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU1 VALUES LESS THAN (18)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 196M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SK2 VALUES LESS THAN (19)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 9M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION CU1 VALUES LESS THAN (20)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 11M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION DLI VALUES LESS THAN (21)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION AEG VALUES LESS THAN (22)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION COM VALUES LESS THAN (23)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION CU2 VALUES LESS THAN (24)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION CUL VALUES LESS THAN (25)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION EAG VALUES LESS THAN (26)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION FP2 VALUES LESS THAN (27)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION HAG VALUES LESS THAN (28)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION HAL VALUES LESS THAN (29)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION JRA VALUES LESS THAN (30)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION LEL VALUES LESS THAN (31)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION MGA VALUES LESS THAN (32)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION MGM VALUES LESS THAN (33)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU2 VALUES LESS THAN (34)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION PEG VALUES LESS THAN (35)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RLM VALUES LESS THAN (36)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL2 VALUES LESS THAN (37)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL3 VALUES LESS THAN (38)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL4 VALUES LESS THAN (39)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL5 VALUES LESS THAN (40)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION BG4 VALUES LESS THAN (41)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION BG5 VALUES LESS THAN (42)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RS2 VALUES LESS THAN (43)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RS3 VALUES LESS THAN (44)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RS4 VALUES LESS THAN (45)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SA1 VALUES LESS THAN (46)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SAF VALUES LESS THAN (47)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SCA VALUES LESS THAN (48)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SL1 VALUES LESS THAN (49)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SL2 VALUES LESS THAN (50)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SPI VALUES LESS THAN (51)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SWP VALUES LESS THAN (52)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION VDL VALUES LESS THAN (53)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 240M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION ZUR VALUES LESS THAN (54)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION AR3 VALUES LESS THAN (55)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 360M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION ZZZ VALUES LESS THAN (MAXVALUE)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
NOPARALLEL;

Is it really necessary to Upgrade from Oracle EBS R11i to R12?

Hi,
Oracle Applications 11.0.3 (Oracle Financials) was implemented in our company and later in 2006 it was upgraded to 11.5.10 (with new implementation of Supply Chain Management Module - INV,OM and PO) and 2 months ago we upgraded it to 11.5.10.2+DB 11gR2.
I've been recommending to upgrade to R12 but the Finance Users are reluctant for an upgrade and of the opinion that the R12 has many bugs and there will be issues after upgrade to R12.
Once of the consultant is of the opinion that its better to re-implement R12 instead of Upgrade. He also tells me that R12 does not have sub-accounting and sub-ledger and trial balance reports in AP.Since I am not a Functional Consultant I could not comment on this.
Please advice if there are any useful docs which address the upgrade to R12 issues which I can share with our consultant and users.
I am currently going thru +Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2 [ID 256.1]+
Rgds,
Thiru

user1983888 wrote:
Hi,
Oracle Applications 11.0.3 (Oracle Financials) was implemented in our company and later in 2006 it was upgraded to 11.5.10 (with new implementation of Supply Chain Management Module - INV,OM and PO) and 2 months ago we upgraded it to 11.5.10.2+DB 11gR2.
I've been recommending to upgrade to R12 but the Finance Users are reluctant for an upgrade and of the opinion that the R12 has many bugs and there will be issues after upgrade to R12.
R12.1.x is a stable release that many customers (including Oracle themselves) have upgraded to.
Once of the consultant is of the opinion that its better to re-implement R12 instead of Upgrade. He also tells me that R12 does not have sub-accounting and sub-ledger and trial balance reports in AP.Since I am not a Functional Consultant I could not comment on this.
The Finance modules have been completely re-written and fucntionality had changed for the better. Re-implementation typically costs upto 3 times more than a upgrade. Re-implementation is not necessary if the business model and process have not changed. What are the consultants justifications for doing a re-implementation (other than making more money) ?
Please advice if there are any useful docs which address the upgrade to R12 issues which I can share with our consultant and users.
I am currently going thru +Upgrade Advisor: Oracle E-Business Suite Financials and Projects Upgrade from 11.5.10.2 to 12.1.3 and 12.1.2 [ID 256.1]+
Pl see the Docs referenced in MOS Doc 850008.1 (Interesting Documents Concerning E-Business Suite 11i to R12 Upgrades)
Rgds,
ThiruHTH
Srini

Error while executing SSIS Package after upgrading the Oracle Client

Hello,
I am running to the below error after we upgraded the Oracle client to 11g from 10g. The source of the Data is Oracle database . Looked online but each error is pointing towards different route, Confused here any help is very much appreciated. Have to say
I am not a pro with SSIS.
SSIS package "Bentek_ISO_Package (2).dtsx" starting.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
Information: 0x40043006 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Temp_tbl Injection Data Flow Task, OLE DB Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-12801: error signaled in parallel query server P183, instance *****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-12801: error signaled in parallel query server P183, instance ****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
Error: 0xC004701A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC0202009.
Information: 0x4004300B at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: "component "OLE DB Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Temp_tbl Injection Data Flow Task
Warning: 0x80019002 at *******: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "****** (2).dtsx" finished: Failure.

Do you have any Date conversion functions in your Oracle datetime fields? I did run into a similar issue when we upgraded the oracle client and the provider started to decipher the metadata of the date columns. The SSIS metadata conversion for the date
columns yielded dates that were not valid. I had to update my queries to use the TO_CHAR conversion to bring it out as a string and then save it to the date field.
TO_CHAR (DATE, 'MM/DD/YYYY HH24:MI:SS')
Regards, Dinesh

Database Upgradation from oracle 9.2.0.8 to oracle11gR2

Hi
we are using AIX 5.3 TL 10 SP4 and we are upgrading DB from oracle9.2.0.8 to oracle 11.2.0.2
i am having some doubt from below pre-upgrade scripts out put.
oratst@ebsdevdb on /tmp # sqlplus "/as sysdba"
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Jul 4 10:11:48 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> spool 11202_upgrade.txt
SQL> @utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 07-04-2011 10:17:06
Script Version: 11.2.0.2.0 Build: 001
Database:
--> name: EBSTEST
--> version: 9.2.0.8.0
--> compatible: 9.2.0
--> blocksize: 8192
--> timezone file: V1
Logfiles: [make adjustments in the current environment]
--> The existing log files are adequate. No changes are required.
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
--> TOOLS tablespace is adequate for the upgrade.
.... minimum required size: 8 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
--> AR_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 33497 MB
--> FND_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 45447 MB
--> AMVD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> ASOD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> CCTD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> IBUD tablespace is adequate for the upgrade.
.... minimum required size: 1 MB
--> IEMD tablespace is adequate for the upgrade.
.... minimum required size: 5 MB
--> IEOD tablespace is adequate for the upgrade.
.... minimum required size: 4 MB
--> JTFD tablespace is adequate for the upgrade.
.... minimum required size: 135 MB
--> OKCD tablespace is adequate for the upgrade.
.... minimum required size: 34 MB
--> XDPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> XNPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> APPS_UNDOTS1 tablespace is adequate for the upgrade.
.... minimum required size: 849 MB
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
WARNING: --> "shared_pool_size" needs to be increased to at least 532 MB
WARNING: --> "java_pool_size" needs to be increased to at least 128 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> optimizer_max_permutations 10.1 OBSOLETE
--> row_locking 10.1 OBSOLETE
--> undo_suppress_errors 10.1 OBSOLETE
--> max_enabled_roles 10.1 DEPRECATED
--> enqueue_resources 10.2 OBSOLETE
--> sql_trace 10.2 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Real Application Clusters [upgrade] INVALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [install]
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Passwords exist in some database links.
.... Passwords will be encrypted during the upgrade.
.... Downgrade of database links with passwords is not supported.
WARNING: --> Deprecated CONNECT role granted to some user/roles.
.... CONNECT role after upgrade has only CREATE SESSION privilege.
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 9.2.0.8.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER ADWANIAH has 1 INVALID objects.
.... USER APPS has 34 INVALID objects.
.... USER CHAKKACHANSA has 1 INVALID objects.
.... USER FA_USER has 9 INVALID objects.
.... USER SYSSEL has 2 INVALID objects.
.... USER SYSTEM has 30 INVALID objects.
.... USER XXITDFINAD has 7 INVALID objects.
WARNING: --> SYSTEM schema default tablespace has been altered.
.... The SYSTEM schema default tablespace is currently set to TOOLS.
.... Prior to upgrading your database please reset the
.... SYSTEM schema default tablespace to SYSTEM using the command:
.... ALTER USER SYSTEM DEFAULT TABLESPACE SYSTEM;
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following commands
while connected as SYSDBA:
EXECUTE dbms_stats.gather_schema_stats('CTXSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('DBSNMP',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('MDSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDPLUGINS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDSYS',options=>'GATHER'
estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('OUTLN',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SYSAUX Tablespace:
[Create tablespace in the Oracle Database 11.2 environment]
--> New "SYSAUX" tablespace
.... minimum required size for database upgrade: 500 MB
From above output script
1)SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
From system tablespace minimum required size means free space from system tablespace or total size of system tablespace?
i am going to use dbua utility for upgrade means does it alter tablespace as per output of scripts or we need to manually alter tablespace size as per requirement?
2)WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
what is above warning and how can i configure ACL's for APPS User?
Thanks
With Regards
A-Z

Hi
oratst@ebsdevdb on /ebdbh/11g/data/cfgtoollogs/dbua/ebstest/upgrade1 # more Upgrade_Directive.log
Connected.
ODMA_DIRECTIVE:VERSION:9.2.0.8
ODMA_DIRECTIVE:MIGRATE_SID:
ODMA_DIRECTIVE:ORA:IGNORE:06512:
ODMA_DIRECTIVE:ORA:FATAL:00600:
ODMA_DIRECTIVE:ORA:FATAL:01012:
ODMA_DIRECTIVE:ORA:FATAL:01031:
ODMA_DIRECTIVE:ORA:FATAL:01034:
ODMA_DIRECTIVE:ORA:FATAL:01078:
ODMA_DIRECTIVE:ORA:FATAL:01092:
ODMA_DIRECTIVE:ORA:FATAL:01109:
ODMA_DIRECTIVE:ORA:FATAL:01119:
ODMA_DIRECTIVE:ORA:FATAL:01507:
ODMA_DIRECTIVE:ORA:FATAL:01722:
ODMA_DIRECTIVE:ORA:FATAL:03113:
ODMA_DIRECTIVE:ORA:FATAL:03114:
ODMA_DIRECTIVE:ORA:FATAL:07445:
ODMA_DIRECTIVE:ORA:FATAL:12560:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01650:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01651:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01652:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01653:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01654:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01655:
ODMA_DIRECTIVE:ORA:RECOVER_ROLL:01562:
ODMA_DIRECTIVE:ORA:RECOVER_INIT:04031:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catupgrd.sql:
ODMA_DIRECTIVE:BOUNCE_DATABASE:UPGRADE:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catuppst.sql:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:sqlplus/admin/help/hlpbld.sql helpus.sql:
Thanks
With Regards
A-Z

SSHR V4 upgrade err (oracle.jbo.NoDefException: JBO-25002)

SSHR V4 upgrade err (oracle.jbo.NoDefException: JBO-25002)
We have recently applied patch 2111325, prequisites patches ,We
have gone thru the README text and html files and did the
neccessary changes.
Created a sample test user with Employee Self-Service V4.0,
Standard/ HR Professional V4.0, Standard responsibilities but
get the same error on all the menu items.
The error URL/ err text are included below. Please suggest a fix
the problem we are having or any pointers to the fix. I can send
the Jserv.Properties file in case you need it.
SSHR V4 access URL:
http://<hostname>:8008/OA_HTML/OA.jsp?
akRegionCode=HR_PROCESS_MY_SUS_EDA_TOP_SS&akRegionApplicationId=8
00&dbc=dev1_ptch&language_code=US&transactionid=CCEB9292A184B222&
pMode=EDA&pFromMenu=Y
ERROR MESSAGE/ TEXT:
Error Page
oracle.apps.fnd.framework.OAException: Application: FND, Message
Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE =
oracle.jbo.NoDefException: JBO-25002: Definition
oracle.apps.per.selfservice.common.server.CommonAM of type
ApplicationModule not found; (NOTE: This message could not be
looked up because an Application Module has not been set on the
exception)
at oracle.apps.fnd.framework.OAException.wrapperException
(OAException.java:383)
at oracle.apps.fnd.framework.OAApplicationPoolImpl.checkout
(OAApplicationPoolImpl.java:49)
at
oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.register
ApplicationModule(OAJSPApplicationRegistry.java:149)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:570)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:232)
at oa_html._OA._jspService(_OA.java:69)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest
(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(JspServlet.java)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest
(JServConnection.java:314)
at org.apache.jserv.JServConnection.run
(JServConnection.java:188)
at java.lang.Thread.run(Unknown Source)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition
oracle.apps.per.selfservice.common.server.CommonAM of type
ApplicationModule not found
at oracle.jbo.server.MetaObjectManager.findMetaObject
(MetaObjectManager.java:354)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject
(ApplicationModuleDefImpl.java:158)
at
oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModu
le(ApplicationModuleImpl.java:257)
at oracle.jbo.server.ApplicationModuleHomeImpl.create
(ApplicationModuleHomeImpl.java:85)
at oracle.jbo.common.ampool.ApplicationPoolImpl.createNewInstance
(ApplicationPoolImpl.java:511)
at oracle.jbo.common.ampool.ApplicationPoolImpl.checkout
(ApplicationPoolImpl.java:634)
at oracle.apps.fnd.framework.OAApplicationPoolImpl.checkout
(OAApplicationPoolImpl.java:43)
at
oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.register
ApplicationModule(OAJSPApplicationRegistry.java:149)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:570)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:232)
at oa_html._OA._jspService(_OA.java:69)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest
(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)

Hi Dani,
Eventually I found the problem, it is reported in Oracle Support as Doc ID 1503173.1.
It seems jDeveloper is a bit special when adding Directories to the MAR file. If the whole directory "/oracle" is added, the adf-config.xml introduces the following line:
namespace metadata-store-usage="WebCenterFileMetadataStore" path="/oracle"/
As a result, this diverts all /oracle/... file and class requests to MDS, which causes failures.
So when editing the MAR deployment profile be careful to select the sub-directories under /oracle/webcenter/portalapp/ one by one.
Added to this, I had to perform the cleaning process you suggested to make it work too, otherwise I get a different error...
Final steps are:
1. Undeploy application.
2. Delete MDS partition.
3. Shutdown managed server.
4. Delete /cache and /tmp content for the managed server.
5. Start managed server.
6. Exectute Clean all in jDeveloper.
7. Create a new mar deployment as described in SR 1503173.1.
8. Deploy to EAR file.
9. Deploy new application to managed server using Enterprise Manager.
And it works!
Thanks for your help!

Upgrade from oracle 9.2.0.6 to 9.2.0.8.

Hi all,
I have to upgrade from oracle 9.2.0.6 to 9.2.0.8.
Please let me know the steps or post a metalink note for this.
my linux version:-
Enterprise Linux Enterprise Linux AS release 4 (October Update 6)
Basically i have to upgrade from 9.2.0.6 to 11i , but as per my knowledge it is not possible to directly move from 9.2.0.6 to 11i .
If this is possible then please let me know the steps or metalink note.

Thanks to all for help.
I have downloaded the patch and started the upgradation,
But meanwhile i am getting error.
I am pasting the log file content.
=======================================
- Linking Oracle
rm -f /data/oracle/db/proddb/9.2.0/rdbms/lib/oracle
gcc -o /data/oracle/db/proddb/9.2.0/rdbms/lib/oracle -L/data/oracle/db/proddb/9.2.0/rdbms/lib/ -L/data/oracle/db/proddb/9.2.0/lib/ -L/data/oracle/db/proddb/9.2.0/lib/stubs/ -Wl,-E `test -f /data/oracle/db/proddb/9.2.0/rdbms/lib/skgaioi.o && echo /data/oracle/db/proddb/9.2.0/rdbms/lib/skgaioi.o` /data/oracle/db/proddb/9.2.0/rdbms/lib/opimai.o /data/oracle/db/proddb/9.2.0/rdbms/lib/ssoraed.o /data/oracle/db/proddb/9.2.0/rdbms/lib/ttcsoi.o /data/oracle/db/proddb/9.2.0/lib/nautab.o /data/oracle/db/proddb/9.2.0/lib/naeet.o /data/oracle/db/proddb/9.2.0/lib/naect.o /data/oracle/db/proddb/9.2.0/lib/naedhs.o /data/oracle/db/proddb/9.2.0/rdbms/lib/config.o -lserver9 -lodm9 -lskgxp9 -lskgxn9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 /data/oracle/db/proddb/9.2.0/rdbms/lib/defopt.o -lknlopt `if /usr/bin/ar tv /data/oracle/db/proddb/9.2.0/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap9" ; fi` -lslax9 -lpls9 -lplp9 -lserver9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lknlopt -lslax9 -lpls9 -lplp9 -ljox9 -lserver9 -locijdbcst9 -lwwg9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `if /usr/bin/ar tv /data/oracle/db/proddb/9.2.0/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo9"; fi` -lctxc9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 -lordimt9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lsnls9 -lunls9 -lxsd9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /data/oracle/db/proddb/9.2.0/lib/sysliblist` -Wl,-rpath,/data/oracle/db/proddb/9.2.0/lib:/lib:/usr/lib -lm `cat /data/oracle/db/proddb/9.2.0/lib/sysliblist` -ldl -lm `test -f /data/oracle/db/proddb/9.2.0/rdbms/lib/skgaioi.o && echo -laio`
/data/oracle/db/proddb/9.2.0/rdbms/lib/opimai.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
make: *** [data/oracle/db/proddb/9.2.0/rdbms/lib/oracle] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ioracle' of makefile '/data/oracle/db/proddb/9.2.0/rdbms/lib/ins_rdbms.mk'. See '/etc/oraInventory/logs/installActions2011-02-23_09-46-08AM.log' for details.
Exception Severity: 1
The output of this make operation is also available at: '/data/oracle/db/proddb/9.2.0/install/make.log'
====================================================================================
content of /data/oracle/db/proddb/9.2.0/install/make.log*
- Linking Oracle
rm -f /data/oracle/db/proddb/9.2.0/rdbms/lib/oracle
gcc -o /data/oracle/db/proddb/9.2.0/rdbms/lib/oracle -L/data/oracle/db/proddb/9.2.0/rdbms/lib/ -L/data/oracle/db/proddb/9.2.0/lib/ -L/data/oracle/db/proddb/9.2.0/lib/stubs/ -Wl,-E `test -f /data/oracle/db/proddb/9.2.0/rdbms/lib/skgaioi.o && echo /data/oracle/db/proddb/9.2.0/rdbms/lib/skgaioi.o` /data/oracle/db/proddb/9.2.0/rdbms/lib/opimai.o /data/oracle/db/proddb/9.2.0/rdbms/lib/ssoraed.o /data/oracle/db/proddb/9.2.0/rdbms/lib/ttcsoi.o /data/oracle/db/proddb/9.2.0/lib/nautab.o /data/oracle/db/proddb/9.2.0/lib/naeet.o /data/oracle/db/proddb/9.2.0/lib/naect.o /data/oracle/db/proddb/9.2.0/lib/naedhs.o /data/oracle/db/proddb/9.2.0/rdbms/lib/config.o -lserver9 -lodm9 -lskgxp9 -lskgxn9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 /data/oracle/db/proddb/9.2.0/rdbms/lib/defopt.o -lknlopt `if /usr/bin/ar tv /data/oracle/db/proddb/9.2.0/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap9" ; fi` -lslax9 -lpls9 -lplp9 -lserver9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lknlopt -lslax9 -lpls9 -lplp9 -ljox9 -lserver9 -locijdbcst9 -lwwg9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /data/oracle/db/proddb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `if /usr/bin/ar tv /data/oracle/db/proddb/9.2.0/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo9"; fi` -lctxc9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 -lordimt9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lsnls9 -lunls9 -lxsd9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /data/oracle/db/proddb/9.2.0/lib/sysliblist` -Wl,-rpath,/data/oracle/db/proddb/9.2.0/lib:/lib:/usr/lib -lm `cat /data/oracle/db/proddb/9.2.0/lib/sysliblist` -ldl -lm `test -f /data/oracle/db/proddb/9.2.0/rdbms/lib/skgaioi.o && echo -laio`
/data/oracle/db/proddb/9.2.0/rdbms/lib/opimai.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
make: *** [data/oracle/db/proddb/9.2.0/rdbms/lib/oracle] Error 1
=====================================================================================================
Thanks and Regards,
Varun.

Upgrade of oracle 11i database 9.2.0.6 to 9.2.0.8

Hi ,
I want upgrade oracle 11i applcation in to r12. for that 1st i need to upgrade my databse 9.2.0.6 to 9.2.0.8 then to 11.1 . iam using OEL5.1 os .IS it possibel to upgrade the database 9.2.0.6 to 9.2.0.8 on OEL5.1 .Kindly help this issue.

Hi,
According to the certification matrix, Oracle9i is not certified with OEL5. So, I am not sure how you managed to have 9.2.0.6 installed and running on this OS. There could be a workaround for ignore the OS pre-req. when running OUI, but I would suggest you log a SR to confirm this with Oracle support.
Since you are upgrading to 9.2.0.8, please refer to (Note: 216550.1 - Oracle Applications Release 11i with Oracle9i Release 2 (9.2.0)) instead of the one referenced in my previous update (same section). Please note that you still need to apply patch 5035661.
Thanks,
Hussein

How to upgrade the Oracle Client silently ?

Hi all,
I have to upgrade the Oracle Client from 8.1.6.0.0 to 9.2.0.1.0.
I use the -record option for creating the destination file or edit the response file manually for being able to install the new client. But I have no idea, how to remove the old client.
The following command doesn't work:
C:\Program Files\Oracle\oui\install\setup.exe" -deinstall DEINSTALL_LIST={"oracle.client","8.1.6.0.0"}
What am I doing wrong? How to remove the Oracle Client silently?
Thanks for the help and best wishes from Frankfurt.
Dimitri

I created a instant client silent DE-INSTALL for version 10.1.0.2 on XP.
setup.exe -silent -deinstall -responseFile Z:\yyyyyy\xxxxxx.rsp
These are parameters are in my response file...
ORACLE_HOME="C:\oracle\InstantClient\10.1.0"
ORACLE_HOME_NAME="OraInstantClient10g_home1"
TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=true
REMOVE_HOMES={"c:\oracle\ora81","c:\oracle\InstantClient\10.1.0"}
You still have to manually update/remove the PATH & TNS_ADMIN environment variables and the file system directories.

Steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.

Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
Thanks in advance.

If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
Also see
MOS Doc 1645862.1

Oracle 11g upgrade from Oracle 10.2.0.4

Dear Friends,
I am upgrading Oracle 11g on OS HP-UX11i v2 with SAP ECC6.0 application.
But I m getting the error as below.
Error in invoking target 'links proc gen_pcscfg' of makefile '/oracle/DVR/11202/precomp/lib/ins_precomp.mk'. See '/oracle/oraInventory/logs/installActions2011-08-09_05-51-08PM.log' for details.
Please find the output of make.log file.
                 /usr/ccs/bin/ar rv /oracle/DVR/11202/lib/libn11.a /oracle/DVR/
11202/lib/nnfgt.o ; fi)
        (if [ "compile" = "binary" ] ; then \
          /oracle/DVR/11202/bin/gennfgt > nnfgt.c
          TARGET_BINARY_INTERFACE=
          export TARGET_BINARY_INTERFACE
          cc +DD64 -c nnfgt.c
          -rm -f /oracle/DVR/11202/lib/nnfgt.o
          -mv nnfgt.o /oracle/DVR/11202/lib/
                  /usr/ccs/bin/ar rv /oracle/DVR/11202/lib/libn11.a /oracle/DVR/
11202/lib/nnfgt.o ; fi)
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME=/oracle/DVR/11202
/       /oracle/DVR/11202/bin/genclntsh
genclntsh: Failed to link libclntsh.so.11.1
Error exit code 1
Stop.
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME=/oracle/DVR/11202
/       /oracle/DVR/11202/bin/genclntsh
genclntsh: Failed to link libclntsh.so.11.1
Error exit code 1
Stop.
/usr/ccs/bin/make -f ins_precomp.mk links proc gen_pcscfg ORACLE_HOME=/oracle/DV
R/11202/        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLCA.H)
        (cd /oracle/DVR/11202/precomp/public/; rm -f ORACA.H)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLDA.H)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLCA.COB)
        (cd /oracle/DVR/11202/precomp/public/; rm -f ORACA.COB)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SQLCA.FOR)
        (cd /oracle/DVR/11202/precomp/public/; rm -f ORACA.FOR)
        (cd /oracle/DVR/11202/precomp/public/; rm -f BNDDSC.FOR)
        (cd /oracle/DVR/11202/precomp/public/; rm -f SELDSC.FOR)
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlca.h    || ln -s sqlc
a.h    SQLCA.H
        cd /oracle/DVR/11202/precomp/public/; test ! -f oraca.h    || ln -s orac
a.h    ORACA.H
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlda.h    || ln -s sqld
a.h    SQLDA.H
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlca.cob || ln -s sqlc
a.cob SQLCA.COB
        cd /oracle/DVR/11202/precomp/public/; test ! -f oraca.cob || ln -s orac
a.cob ORACA.COB
        cd /oracle/DVR/11202/precomp/public/; test ! -f sqlca.for || ln -s sqlc
a.for SQLCA.FOR
        cd /oracle/DVR/11202/precomp/public/; test ! -f oraca.for || ln -s orac
a.for ORACA.FOR
        cd /oracle/DVR/11202/precomp/public/; test ! -f bnddsc.for || ln -s bndd
sc.for BNDDSC.FOR
        cd /oracle/DVR/11202/precomp/public/; test ! -f seldsc.for || ln -s seld
sc.for SELDSC.FOR
        /usr/ccs/bin/make -f /oracle/DVR/11202/precomp/lib/ins_precomp.mk relink
EXENAME=proc
Linking /oracle/DVR/11202/precomp/lib/proc
ld: Can't find library for -lclntsh
Fatal error.
Error exit code 1
Stop.
Error exit code 1
Stop.
Regards
Ganesh Datt Tiwari

HP-UX 11.23 is not supported with Oracle 11, you need 11.31:
Note 1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
<...>
Installing Oracle Database 11.2.0.2 on HP-UX 11.23 (11i V2)
is not supported (see Oracle Installation Guide).
Minimum OS version is 11.31 (11i V3).
<...>
Markus

ERP 6.0 EHP4 SR1 Upgrade Unix Oracle issue with /STARTUP

We are in the process of doing an ERP 6.0 EHP4 SR1 Upgrade Unix Oracle Upgrade. We have ran into a problem running the /STARTUP, we are using the Upgrade Master DVD 51036889 as well as have down loaded it from service market place and jce_policy-1_5_0.zip as well as the one on SAP service market place. When we execute the command /STARTUP jce_policy_zip=jce_policy-1_5_0.zip the job starts and runs down to where the controller for port 4241 starts and then hangs. If we control C out and go to the /usr/sap/SID/upg and run /STARTUP it runs all the way through setting up both 4241 controller and 4239 controller, we then go to the web browser and launch the Gui => logon as administrator => upgrade roadmap screen pops up it is set on the initialization phase we hit next and nothing happens after that, we don't get the ABAP tab or the progress bar. We would appreciate any help.

Hi Jerry,
The first time you run STARTUP its run from the NW7 EHP1 SR1 DVD. Just wanted to confirm that your running it from this DVD. This extracts and setups your /usr/sap/<SID>/upg directory. It sounds like this directory hasn't been setup correctly which is why your not seeing anything when you login to the GUI.
Can you confirm that you got your JCE files from SWDC -> SAP Cryptograpic Software ?
OSS Note - 1240081
http://service.sap.com/swdc > Download > SAP Cryptographic Software
I had to use the JCE file from here to get my upgrade to work. What OS are you on?
Hope this helps.
Cheng

When to change COMPATIBLE parameter while upgrading to Oracle 11G

We are planning to upgrade from Oracle 10.2.0.4 on AIX to Oracle 11.2.0.2 soon.
While reading oracle upgrade documents and from oracle upgrade blog, it is mentioned that once we change compatible parameter,
we will not be able to catdwgrd.sql to downgrade.
However, if we don't change compatible parameter after an upgrade, all the testing efforts during upgrade process wont be complete
as we may need to do another round of testing after changing this value.
So what is the best time for changing this compatible parameter? 1 week or 2 weeks after upgrade?
We are considering catdwgrd.sql as our option to fallback if something goes wrong.
Thank You
Sarayu

Hi,
It's a difficult question. If your applications are validated with 11gR2, if your OS is certified to work with Oracle 11gR2, if you adjusted the requirements etc. it will work. Will it work 100% well ? Maybe not but downgrading is really an extreme solution. 11gR2 is a fully supported version and anyway you will obtain efficient support from Oracle if you encountered a bug etc.
If you have doubts change when you are sure every critical activity/charge you expect went well for example. We cannot know if it will be after 1 week or 2 weeks : it's up to you.
Be sure you check what Tom says about the COMPATIBLE parameter (it's interesting to know exactly what it covers, it does not cover the optimizer features etc.) : http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:485421569569
Best regards
Phil

Oracle 10g RAC to 11g RAC Upgrade on Solaris

Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanks

a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Oracle 8.1.7.2.1 upgrade to Oracle 9

Similar Messages

Maybe you are looking for