Oracle 8.1.7.3 client on Windows Server 2008 64bit

Hi all!
I'm a newbie to Oracle and this forum, so please be gentle...:)
I'm trying to install Oracle 8.1.7.3 client on a 64bit Windows Server 2008, without success. Best result I got so far is 'installed' client and provider, but unable to run the config tools, or use the provider. I installed the same client on a 32bit version of Win Server 2008 and it worked with few minor tweaks.
Reason I'm doing this is trying to integrate an old legacy Oracle 7 database with SQL Server 2008 using linked servers.
Upgrading to a recent version is not an option.
Anyone has any guidelines? please help, this is driving me nuts!
Thanx,
Igor

user12219185 wrote:
hmmm i'm trying the download on http://edelivery.oracle.com, but can't find 64bit client.. it has 64bit database version, which is 2 cds... is the client included?
The client is included. Download it and start the installation. It should give you an option to select 'client only'.

Similar Messages

  • VS2008 on Windows Server 2008 (64bit)

    Can I use Oracle Developer Tools for Visual Studio on Windows Server 2008 (*64bit*).
    Thanks

    Visual Studio is still 32 bit even if you install ilt on a 64 bit OS.
    Currently, the only supported version of Oracle for Win2k8 is 32 bit 10204.
    I'd think that should work fine, although I havent tested it myself.
    An issue you'll run into though, is trying to actually RUN the app you're creating on 64 bit Win2k8 will default to a 64 bit app, and therefore want to load the 64 bit ODP.NET and 64 bit Oracle client which you wont have installed, so you'll likely get a BadImageFormat Exception unless you make the app run as 32 bit.
    Hope it helps,
    Greg

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008

    Hi,
    I am a little confused because I have Windows Server 2008 64 bit operating system and had installed Oracle 11g 11.1.0.6.0 (x64) prior to the Oracle 11g 11.1.0.7.0 for Windows Server 2008 install package becoming available.
    My database needs no backup of data as it is a fresh installation so its removal is not a problem.
    To now upgrade to Oracle 11g 11.1.0.7.0 for Windows Server 2008 do I need to
    a) Uninstall Oracle 11.1.0.6.0 (x64) and then install Oracle 11.1.0.7.0 on Windows Server 2008
    or
    b) Apply patch 6890831 (will this upgrade from 11.1.0.6.0 x64 to 11.1.0.7.0 for Windows Server 2008?)
    Any help much appreciated as having looked at documentation I am still confused what I need to do.
    Thanks.

    Duplicate post
    Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008
    Please continue with other thread.

  • About Install Oracle Access Manager On Windows Server 2008 64bit

    hi,
    Question 1:
    Can I install OAM10g(10.1.4.3.0) on Windows Server 2008 64bit ?
    (because OAM10g all is for win32)
    (I have tried to install it , but when OHS restart, have errors, so I found the 64bitOS is the trouble...)
    Question 2:
    If Question1 cannot, Can Oracle Identity and Access Management 11g fix it ?
    Help
    Thanks.

    Does this server use Itanium processors ? See MOS Doc 430677.1 (The image file setup.exe is valid, but is for a machine type other than the current machine.)
    Srini

  • Crystal Report 2008 on Windows Server 2008 64bit

    hi,
    I tried to run a Crystal Reports Web Application on a Windows Server 2008 64bit but I got this error:
    "Bei der Erzeugung des Reports ist ein Fehler aufgetreten.
    Der Typeninitialisierer für "CrystalDecisions.CrystalReports.Engine.ReportDocument" hat eine Ausnahme verursacht.
    CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Fehler beim Versuch, die Crystal Reports-Laufzeit zu laden.
    Entweder reichen die Berechtigungen des Crystal Reports-Registrierungsschlüssels nicht aus, oder die Crystal Reports-Laufzeit wurde nicht ordnungsgemäß installiert.
    Installieren Sie die geeignete verteilbare Crystal Reports-Datei (CRRedist*.msi), die die erforderliche Version der Crystal Reports-Laufzeit (x86, x64 oder Itanium) enthält. Weitere Informationen erhalten Sie unter folgender Adresse: http://www.germany.businessobjects.com/support/default.asp.
    "Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information."
    The System:
    - Windows Server 2008 Standard 64bit SP2
    - Microsoft .NET Framework 3.5 SP1
    - Oracle Client 10gR2 64bit
    - I tried Crystal Report 2008 Runtime, Crystal Report 2008 Runtime SP1, Crystal Report 2008 Runtime SP2, Crystal Report 2008 Runtime SP3.
    - Crystal Report Basic Runtime for Visual Studio 2008 (x64)
    On a 32bit-system or 32bit-mode (and 32bit Oracle Client) everything is working fine. But I have to use the 64bit Oracle Client, therefore, Crystal Report have to work in 64bit-mode.
    Is it possible and what is to do to get it working, thanks,
    Martin

    It does work on 64 bit OS - as a 32 bit application. CR 2008 is 32 bit only.
    See the article [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] for more info.
    Ludek

  • Installing Forms 11g 64bit on Windows Server 2008 64bit

    Hi,
    we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
    - installed JDK 64bit
    - installed WLS1032-generic
    - started installation of Forms/Reports
    Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
    Info in Log-File :
    =========================================================
    oracle.as.provisioning.util.ConfigException:
    Fehler beim Starten der Domain.
    Cause:
    Zeitüberschreitung beim Starten von Admin_Server.
    Action:
    Weitere Informationen finden Sie in den Logs.
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
         at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    [2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
         at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    ================================================
    Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
    Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
    Any idea or help is appreciated.
    Thanks,
    Mark

    FYI,
    This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
    =================================
    1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
    2) Roll back the change so the System Path contains again the directory path with parenthesis
    3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
    if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
    4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
    5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
    ==================================
    Thanks for your replies,
    Mark

  • How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit

    Dear
    Exparts, Hope you are fine.
    Application Server: Standalone 10.1.2.3
    OS: Windows Server 2008 64bit
    Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
    But i need to install. Have any one has successfull experiances to do so ?
    Please share and guide.
    Waiting for your valuable responses.
    ask2learn

    Dear Marcus,
    Thanks for your reply.
    I tried Application Server Stand Alone and success.
    So, i closed the thread.

  • 10.1.0.2.0 database download link needed for window server 2008 64bit

    Here is our plan. We are currently running oracle 10.1.0.2 database on a windowsServer 2003 32 bit.
    Now we would like to migrate the database to 10gR2 and run it on our new server windows server 2008 64bit. After doing research, I think I need to go through the following step:
    1) install 10.1.0.2 on our new server,
    2) clone the database using the current back up data on the new server.
    3) install 10gR2 on the new server.
    4) using dbua to upgrade the older database to the new version.
    Please let me know whether those steps are correct.
    If yes, where can I download 10.1.0.2 version database for 64bit window server 2008?
    The only link I can find is http://www.oracle.com/technology/software/products/database/index.html
    but 10gR1 not listed.
    Thank you very much!

    Welcome to the forums !
    10gR1 is de-supported, hence you will not find any download links. You will have to create an SR to see if Support can mail you the install media.
    How big is the database ? One other option you have is to export the 10.1.0.2 database and import into 10gR2 on the new server. This will achieve the upgrade in one step and will not require the intermediate 10.1.0.2 version on the new server.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/preup.htm#BABFHFIJ
    MOS Doc 419550.1- Different Upgrade Methods For Upgrading Your Database
    HTH
    Srini

  • Required weblogic 10.3.5 instllable for windows server 2008(64bit)

    Hi,
    I have been trying to find the weblogic server(10.3.5), CO(13.4), BO(13.4) and POS(13.4) installable for Windows server 2008(64bit) but am unable to find them in e-delivery or anywhere else on Oracle website.
    Can anyone please provide me the link for these software downloads.
    Thanks.

    Hi
    On this below link, look for older versions of Weblogic Server which is at the bottom of the page. Expand for WLS 10.3.5. You need Weblogic Server + Coherence package installer. Download the generic jar installer.
    http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
    See this below post for more details:
    Re: Why So Difficult To Find WebLogic Server 10.xx for Windows 7 64-bit??
    Thanks
    Ravi Jegga

  • Install CF8.01 on Windows Server 2008 64bits

    Hello,
    I have a new machine whith Windows server 2008 x64 and i
    installed on it CF8.01.
    For installing, no problems and the service work fine.
    But, when i launch one page on the web server, a .cfm or a
    classic html the IIS 7 return a error 500.21 :
    HTTP Error 500.21 - Internal Server Error
    Handler "AboMapperCustom-26364" has a bad module
    "IsapiModule" in its module list Detailed Error InformationModule
    IIS Web Core
    Notification ExecuteRequestHandler
    Handler AboMapperCustom-26364
    Error Code 0x8007000d
    Requested URL
    http://127.0.0.1:80/
    Physical Path C:\inetpub\wwwroot
    Logon Method Anonymous
    Logon User Anonymous
    In IIS config panel, handlers mapping, i have entry for all
    CF handler and one with path * and direct from
    jrun_iis6_wildcard.dll.
    the section of web config for handlers is :
    <handlers accessPolicy="Read, Script,Execute">
    <clear />
    <add name="AboMapperCustom-23790" path="*" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\1\jrun_iis6_wildcard.dll"
    requireAccess="None" responseBufferLimit="0" />
    <add name="AboMapperCustom-23791" path="*.jsp" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="AboMapperCustom-23792" path="*.jws" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="AboMapperCustom-23793" path="*.cfm" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="AboMapperCustom-23794" path="*.cfml" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="AboMapperCustom-23795" path="*.cfc" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="AboMapperCustom-23796" path="*.cfr" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="AboMapperCustom-23797" path="*.cfswf" verb="*"
    modules="IsapiModule"
    scriptProcessor="C:\ColdFusion8\runtime\lib\wsconfig\jrun_iis6.dll"
    requireAccess="Script" responseBufferLimit="0" />
    <add name="TRACEVerbHandler" path="*" verb="TRACE"
    modules="ProtocolSupportModule" requireAccess="None" />
    <add name="OPTIONSVerbHandler" path="*" verb="OPTIONS"
    modules="ProtocolSupportModule" requireAccess="None" />
    <add name="StaticFile" path="*" verb="*"
    modules="StaticFileModule,DefaultDocumentModule"
    resourceType="Either" requireAccess="Read" />
    </handlers>
    and
    Application 32bits mode is ok
    <applicationPoolDefaults enable32BitAppOnWin64="true">
    <processModel identityType="NetworkService" />
    </applicationPoolDefaults>
    Have you an idea why the application server fail.
    Thanks for your responses.
    Seb

    I'm pretty sure Adobe offers free installation support, try
    contacting them:
    http://www.adobe.com/support/contact/
    Ken Ford
    Adobe Community Expert - Dreamweaver/ColdFusion
    Fordwebs, LLC
    http://www.fordwebs.com
    "sebFrance" <[email protected]> wrote in
    message news:g1el1t$e2l$[email protected]..
    > Hello and thank you again,
    > I configured Application Pools in 32bitsenabled.
    >
    > I had always error 500.21
    >
    > Then I uninstalled CF8 and reinstalled with 32bits
    enabled in the application
    > pools.
    > I've always the same mistake.
    >
    > It is also important to know that when I webserver
    config to remove the server
    > I get an error:
    >
    > "Error deleting IIS application extensions. Jsp,. Jsw,.
    Cfm,. Cfml,. Cfc,.
    > Cf.,. Cfswf,. Mxml, from web site Any (0)"
    >
    > In addition, handlers configured in the web site
    "AboMapperCustom-26764" with
    > the isapi module for the "*" is the one that fails.
    >
    > East I forgot something:
    >
    > I recall the installation process complete server:
    >
    > Installing Windows Server 2008 64bits.
    > ----
    > Installing the Web server role with IIS7 :
    > ----
    > Common HHTP Features (All options)
    > Health and diagnostics -> request monitor
    > Security -> Request Filtering
    > Performance -> Static content compression
    > Managements tools (IIS Management Console + IIS6
    Compatibility)
    > ----
    > Installing SQL server 2005 64bits
    > ----
    > Passage of the authorized application pools in 32-bit
    applications
    > ----
    > Installing CF8 version 8.01 standard 32bits
    > ----
    > Modifying files as indicated ksmith.
    > ----
    > For each phase I restart the machine so that changes are
    properly taken into
    > account.
    >
    > Despite all this I have always error 500.21
    >
    > East I forgot some things, a service or a component that
    I should download.
    >
    > But thank you for your valuable advice.
    >
    > S?bastien
    >
    >
    >

  • Which version of Windows Server 2012 needs to be ordered so that I can downgrade to Windows Server 2008 64bit Standard SP2

    Dears in Microsoft,
    We need to have Windows Server 2008 Standard SP2 64bit to be installed and due to the fact it is no more available in Microsoft.
    I am going to order Windows 2012 with 16 CAL in order to downgrade it to Windows 2008 Standard SP2 64bit. My question is:
    1. Which version of Windows Server 2012 needs to be ordered so that I can downgrade to Windows Server 2008 64bit Standard SP2?
    2. what else required in terms of product key, media, license...etc?
    Appreciate your kind supports.
    thanks and best regards
    Barznj Abdullah

    Any licensing questions are always best addressed by a trained Microsoft licensing specialist.  You can find whom to call by looking at www.microsoft.com/licensing.
    One of the built-in rights of a Windows Server license is the right to run earlier versions of the operating system.  So if you purchase either Standard or Datacenter, you can run 2008 Standard.
    However, that does not provide the media or activation codes for earlier versions of the operating sytem.  You have to obtain those via other channels.  You should most likely contact a Microsoft reseller and talk to them.  They will
    most likely have a trained licensing specialist on hand to help answer your questions, and they should also be able to provide media for earlier distributions (for a slight fee).
    .:|:.:|:. tim

  • Oracle 11g Client for Windows Server 2008 Relase2 Operating Stystem

    Hi,
    I am having a server with Operating System as Windows Server 2008 R2 version 64 - bit.
    I am using SSRS 2008 which is 64 bit, for retreiving the data from Oracle (which is 11g - 32 bit), I am unable to create data source for Oracle.
    I had installed ODAC Components of Oracle 11.1.0.7.20 on the server, but still I am getting the following error:
    "The 'OraOLEDB.Oracle.1' provider is not registered on the local machine."
    Does any one know how to install Oracle Client 11g on Windows Server 2008 R2 Operating system?

    Helios,
    It is wonderful that you are polite and encouraging to new people.
    While you are responding, could you explicitly direct people to use the correct forum. This has at least 2 benefits:
    1) Ensures that the person gets the widest possible amount of assistance;
    2) Ensures that the rest of us do not need to waste time on improperly placed questions.
    I suggest 'explicitly' since some people do not get the hint, and keep returning to the original thread.
    This thread belongs in 'Database - General' or 'Database - Install'.

  • Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

    I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
    to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
    [LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
    [LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
    [LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
    When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
    The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
    Thanks in advance.
    Thanks

    this maybe helpful...
    http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
    should be asked in SCCM forum...
    http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
    Best,
    Howtodo

  • Printing from OSX Lion Client to Windows Server 2008

    I have tried these methods:
    =============
    via System Preferences
    IP Printer (Line Printer Daemon - LPD)
    Address (both Server Name and IP Address)
    e.g.  lpd://servername/queue
    Queue
    Print Using (HP LaserJet P4010 Series)
    Result:  
    After a test print is sent, the print queue dialog reads:
    Processing Job.
    Copying Print Data.
    Connecting to Printer.
    Paused - "/usr/libexec/cups/backend/lpd failed"
    **** I have also tried using the hostname in place of the IP address
    I get something to the effect of:
    D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Pre-processing tasks:
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Post-processing tasks:
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] ------------------------------------------------------
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Read 8170 bytes of print data...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Wrote 8170 bytes of print data...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to 10.157.32.92:515 for printer DOBL_24HR1
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connecting to printer.
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connecting to printer.", current level=INFO
    D [10/Nov/2011:12:24:35 -0500] [Job 27] STATE: -connecting-to-device
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to printer.
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Set job-printer-state-message to "Connected to printer.", current level=INFO
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Connected to 10.157.32.92:515 (local port 1009)...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command 02 DOBL_24HR1
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Sending command string (12 bytes)...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Reading command status...
    D [10/Nov/2011:12:24:35 -0500] [Job 27] lpd_command returning 1
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Backend returned status 1 (failed)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] Printer stopped due to backend errors; please consult the error_log file for details.
    D [10/Nov/2011:12:24:35 -0500] [Job 27] End of messages
    D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state=5(stopped)
    D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-message="/usr/libexec/cups/backend/lpd failed"
    D [10/Nov/2011:12:24:35 -0500] [Job 27] printer-state-reasons=paused
    =============
    via System PreferencesWindows *navigated to the server (e.g. smb://servername/printer/) with the browser.
    Result:
    After a test print is sent, i login to the dialog box with:
    DOMAIN\USERNAME
    PASSWORD
    (*) Remember this password in my keychain
    Status - On Hold (Authentication Required)
    **** I have also tried various formats for the username here:
    DOMAIN\USERNAME & password
    USERNAME & password
    SERVER\USERNAME & password
    Here's the Log output:
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Queued on "DOBL_24HR1" by "lab".
    D [10/Nov/2011:12:26:21 -0500] [Job 28] job-sheets=none,none
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[0]="DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[1]="28"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[2]="lab"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[3]="testprint"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[4]="1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=testprint com.apple.print.PrinterInfo.PMColorDeviceID..n.=3671 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=1580 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 fit-to-page media=Letter pserrorhandler-requested=standard job-uuid=urn:uuid:ad3091e2-399a-3964-4c78-b8a81bf25bdf job-originating-host-name=localhost time-at-creation=1320945980 time-at-processing=1320945980 PageSize=Letter"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] argv[6]="/private/var/spool/cups/d00028-001"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[0]="<CFProcessPath>"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[11]="[email protected]"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[12]="SOFTWARE=CUPS/1.5.0"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[14]="USER=root"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[15]="CUPS_SERVER=/private/var/run/cupsd"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[16]="CUPS_ENCRYPTION=IfRequested"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[17]="IPP_PORT=631"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[18]="CHARSET=utf-8"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[19]="LANG=en_US.UTF-8"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[20]="APPLE_LANGUAGE=en-US"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[21]="PPD=/private/etc/cups/ppd/DOBL_24HR1.ppd"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[22]="RIP_MAX_CACHE=128m"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[23]="CONTENT_TYPE=application/vnd.cups-banner"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[24]="DEVICE_URI=smb://utlab-prsrv-02/DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[25]="PRINTER_INFO=DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[26]="PRINTER_LOCATION="
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[27]="PRINTER=DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[28]="PRINTER_STATE_REASONS=none"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[29]="CUPS_FILETYPE=document"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[30]="FINAL_CONTENT_TYPE=printer/DOBL_24HR1"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[31]="AUTH_I****"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[32]="AUTH_U****"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] envp[33]="AUTH_P****"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgbannertopdf (PID 7646)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/cgpdftops (PID 7647)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /usr/libexec/cups/filter/pstops (PID 7648)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 7649)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started backend /usr/libexec/cups/backend/smb (PID 7650)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Started smb backend (PID 7653)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] STATE: +connecting-to-device
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Connecting to printer...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Connecting to printer...", current level=INFO
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Looking up "utlab-prsrv-02"...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Set job-printer-state-message to "Authentication required", current level=ERROR
    D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend (PID=7653) stopped with status 512
    D [10/Nov/2011:12:26:21 -0500] [Job 28] smb backend will exit with status 2
    D [10/Nov/2011:12:26:21 -0500] [Job 28] load_banner(filename="/private/var/spool/cups/d00028-001")
    D [10/Nov/2011:12:26:21 -0500] [Job 28] hpPostProcessing launched
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - copying to temp print file "/private/var/spool/cups/tmp/01ddf4ecb23b2"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Final document orientation - 0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Setting language to en-US
    D [10/Nov/2011:12:26:21 -0500] [Job 28] EWU support is absent for device.
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Pages per sheet - 1
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Orientation - portrait
    D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Pre-processing tasks:
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%BeginDocument     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %!PS-Adobe     Processor - EmbeddedDocumentCounter     "Check for embedded document"     (pre, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%EndComments     Processor - DriverVersion     "Insert driver info"     (pre, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Post-processing tasks:
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Line - %%Page:     Processor - PageAccounting     "Log page for accounting"     (post, mandatory, substr)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] ------------------------------------------------------
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Allowing document iterator to handle job termination...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Using line-by-line file iteration...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - using PPD file "/private/etc/cups/ppd/DOBL_24HR1.ppd"...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PS Matching Mode = AP_ApplicationColorMatching
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
    D [10/Nov/2011:12:26:21 -0500] [Job 28] cgpdftops - documentMediaBox.size.width = 612, documentMediaBox.size.height = 792
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Page = 612x792; 12,12 to 600,780
    D [10/Nov/2011:12:26:21 -0500] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_comments - %!PS-Adobe-3.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %!PS-Adobe-3.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %APL_DSC_Encoding: UTF8
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Title: (testprint)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Creator: (cgpdftops CUPS filter)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%CreationDate: (Thursday, November 10 2011 12:26:21 EST)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%For: (lab)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%DocumentData: Clean7Bit
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%LanguageLevel: 3
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%Pages: 1
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%BoundingBox: (atend)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%PageOrder: Ascend
    D [10/Nov/2011:12:26:21 -0500] [Job 28] %%EndComments
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_prolog - userdict/dscInfo 5 dict dup begin
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before copy_setup - %%BeginSetup
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Before page loop - %%Page: 1 1
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Copying page 1...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] pagew = 588.0, pagel = 768.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PageLeft = 12.0, PageRight = 600.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PageTop = 780.0, PageBottom = 12.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] PageWidth = 612.0, PageLength = 792.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Calling processor DriverVersion before line %%EndComments
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Received SIGPIPE
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Wrote 1 pages...
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Backend returned status 2 (authentication required)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] Job held for authentication.
    D [10/Nov/2011:12:26:21 -0500] [Job 28] End of messages
    D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state=3(idle)
    D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-message="Authentication required"
    D [10/Nov/2011:12:26:21 -0500] [Job 28] printer-state-reasons=none
    ==============
    via CUPS (localhost:631)here is the syntax of my printer addresses:
    SAMBA--
    smb://username:password@serverhost/printer
    smb://username:password@serverip/printer
    smb://serverhost/printer
    smb://serverip/printer
    I get something like...
    "/usr/libexec/cups/backend/smb failed"
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_comments - %!PS-Adobe-3.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %!PS-Adobe-3.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %APL_DSC_Encoding: UTF8
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %APLProducer: (Version 10.7.2 (Build 11C74) Quartz PS Context)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Title: (testprint)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Creator: (cgpdftops CUPS filter)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%CreationDate: (Thursday, November 10 2011 12:39:00 EST)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%For: (lab)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%DocumentData: Clean7Bit
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%LanguageLevel: 3
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%Pages: 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%BoundingBox: (atend)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%PageOrder: Ascend
    D [10/Nov/2011:12:39:00 -0500] [Job 29] %%EndComments
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_prolog - userdict/dscInfo 5 dict dup begin
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before copy_setup - %%BeginSetup
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Before page loop - %%Page: 1 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Copying page 1...
    D [10/Nov/2011:12:39:00 -0500] [Job 29] pagew = 588.0, pagel = 768.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PageLeft = 12.0, PageRight = 600.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PageTop = 780.0, PageBottom = 12.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PageWidth = 612.0, PageLength = 792.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor EmbeddedDocumentCounter before line %!PS-Adobe-3.0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor DriverVersion before line %%EndComments
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Task "Insert driver info" complete. Processor - DriverVersion. Line - %%EndComments
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Current page number is 0
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Calling processor PageAccounting after line %%Page: 1 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] PAGE: 1 1
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/": STATUS_LOGON_FAILURE
    D [10/Nov/2011:12:39:00 -0500] [Job 29] ATTR: auth-info-required=username,password
    D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend (PID=8517) stopped with status 512
    D [10/Nov/2011:12:39:00 -0500] [Job 29] smb backend will exit with status 2
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Received SIGPIPE
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Wrote 1 pages...
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Backend returned status 2 (authentication required)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] Job held for authentication.
    D [10/Nov/2011:12:39:00 -0500] [Job 29] End of messages
    D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state=3(idle)
    D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-message="Authentication required"
    D [10/Nov/2011:12:39:00 -0500] [Job 29] printer-state-reasons=none
    =================
    So yeah...
    I'm totally stumped now.
    I feel like I've tried every method imaginable, but still no luck.
    Printing from OSX 10.6.8 works just FINE.
    On the server side, I'm running Windows Server 2008... there's only a local admin and a local user account.
    Clients running OSX Lion 10.7.2 -- All updated.
    Printer is an HP LaserJet P4010-4510 series.
    Workstation is an iMac 21.5-inch, Late 2009
    3.06 Ghz Intel Core 2 Duo
    Please help!!!
    --- Richard

    LPD print service is not enabled by default in Server 2008. It can be enabled via the Print Serveer role, but I am remote and cannot confirm the exact setting.
    As for SMB, the error log is showing;
    Failed to connect to "smb://<username>:<password>@utlab-prsrv-02/"
    So it would suggest that there is still an issue with the account detail you are using as you show you have tried this syntax at one stage. If you want to continue to create the queue using SMB rather than LPD then I recommend using the CUPS web page (http://127.0.01:631) to create the queue. This will allow you to enter the syntax exactly as the error message shows. From previous testing I found it was okay to just use the account name rather than domain/account name on a domain bound server.

Maybe you are looking for

  • System performance very slow all of a sudden

    My iMac suddenly began running and loading web pages painfully slow? First problem ever...what should I try first?

  • Unable to see ESS content with an end user

    Hi All, When I try to see my ESS content with an end user, it is giving me the following error: com.sap.xss.config.FPMConfigurationException: Read of object with ID portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_serv

  • GDR3 update for Lumia 822

    Hi, When is GDR3 update for lumia 822 expected? Any tentative timelines?If any one knows any information about it.

  • Network Drive/Cover Art/Music Folder Location

    Hello, On my work PC, I have used a network drive for my iTunes music folder location. We have a 'jukebox' of sorts that multiple people can access. The connection to this drive is not so hot (i.e., it's a bit slow), but it has always been sufficient

  • Macbook Pro Core Duo, Normal heat problems???

    Hi guys. I have a First Generation Macbook Pro, i bought it like 8 months ago from ebay. The guy that sold me this mac told me that it doesn't have any heat problems at all, but im just, im sorry, i can't say the same right now. Since i receive, when