Oracle 8.1.7.4.0 with Brtools 620

Hi,
I am trying to find out using OSS notes if there are issues around brtools 620 being used with Oracle 8 but i can seem to find any. Has anyone done this and can assure its workable? If that is the case then what patch level do i need to be with Oracle 8, SAP Kernel (if applicable) and patch level for brtools 620?
We have an issue with multiple systems running on a single server and one is using Oracle 10, one is Oracle 9 and the other is Oracle 8. the backup tool we use is networker and it is compatible with all database versions but i need to make sure that brtools 620 will work with Oracle 8. Currently, it uses brtools 610 with Oracle 8.
Your help would be very much appreciated.
Regards,
Mani

Hi,
Please refer to SAP note 578113.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=578113]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1174136]
Hope this helps.
Manoj Chintawar
Edited by: Manoj Chintawar on Feb 19, 2009 12:21 PM

Similar Messages

Physical disk space after ORACLE reorganization with brtools

Hi all! .
I perform reorganization after arсhiving with brtools. In db02 shows that free size in tablespace are increased but physical disk space not changed.
Can i make changes in online with brtools to increase physical disk space in reorganized tablespaces?
system ver. : ECC 5.0, oracle 9.2.0.7.0, BRTOOLS 6.40 (52)
Thanks for help!
Edited by: Andrey Burakov on Jun 14, 2011 7:39 AM

Andrey Burakov wrote:
Hi all! .
> I perform reorganization after arсhiving with brtools. In db02 shows that free size in tablespace are increased but physical disk space not changed.
> Can i make changes in online with brtools to increase physical disk space in reorganized tablespaces?
> system ver. : ECC 5.0, oracle 9.2.0.7.0, BRTOOLS 6.40 (52)
> Thanks for help!
>
> Edited by: Andrey Burakov on Jun 14, 2011 7:39 AM
Hi Andrey,
You need to reorganize whole tablespace, not only tables in order to reclaim the free space to the OS.
The prerequisite for online reorganization is:
Oracle 9.2 database or higher.
The prerequisite for online conversion of the LONG-fields into LOB-fields:
Oracle 10g database or higher.
Online conversion is supported for SAP kernel 7.00 or higher. For SAP kernel 6.40,
it is supported only in a restricted manner (see "Caution" in point III). Conversion is
not supported for SAP systems with a kernel lower than 6.40.
Check the note 646681 - Reorganizing tables with BRSPACE
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Jun 14, 2011 9:10 AM

Change the SYS & SYSTEM Oracle passwords with BRTOOLS, any concerns ?

Hello, I would like to change both the SYS and SYSTEM Oracle passwords with BRTOOLS :
(1) Can I use BRTOOLS to change them, or, I have to change them through SQLPlus ?
(2) Any concerns, will this password change affect my SAP normal operations ?
(3) Do I need to re-start the whole SAP UNIX system when I complete the password changing ?
(4) Or changing these 2 passwords is totally an Oracle RDBMS issue, it will not have any effect on SAP ?

But I failed. I was going to change the password of SYSTEM, but why SAP asked me to enter the password of SAPDEV ?
Why ? OK, then I entered the SAPDEV password (it is the same as SYSTEM's old password).
Then, I called SQLPlus and entered login name : SYSTEM, but why its correct password was still the old one, the new one failed. Why ?
I just wanted to change the password of SYSTEM, why it was related to SAPDEV ?
Here is the screen message :
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
8
BR0280I BRTOOLS time stamp: 2010-01-15 10.22.46
BR0663I Your choice: '8'
BR0280I BRTOOLS time stamp: 2010-01-15 10.22.46
BR0656I Choice menu 2 - please make a selection
Additional BR*Tools functions
1 = Show profiles and logs
2 - Clean up DBA logs and tables
3 - Adapt NEXT extents
4 - Change password of database user
5 - Create/change synonyms for DBA tables
6 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
4
BR0280I BRTOOLS time stamp: 2010-01-15 10.23.14
BR0663I Your choice: '4'
BR0280I BRTOOLS time stamp: 2010-01-15 10.23.14
BR0657I Input menu 59 - please check/enter input values
BRCONNECT options for changing password of database user
1 - BRCONNECT profile (profile) ............... [initDEV.sap]
2 - Database user/password (user) ............. [/]
3 ~ Database owner to change password (owner) . []
4 - Message language (language) ............... [E]
5 - BRCONNECT command line (command) .......... [-p initDEV.sap -l E -f chpass]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
2
BR0280I BRTOOLS time stamp: 2010-01-15 10.28.56
BR0663I Your choice: '2'
BR0280I BRTOOLS time stamp: 2010-01-15 10.28.56
BR0681I Enter string value for "user" [/]:
SYSTEM
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.08
BR0683I New value for "user": 'SYSTEM'
BR0263I Enter password for database user 'SYSTEM' (maximum 8 characters):
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.32
BR0657I Input menu 59 - please check/enter input values
BRCONNECT options for changing password of database user
1 - BRCONNECT profile (profile) ............... [initDEV.sap]
2 - Database user/password (user) ............. [SYSTEM/*******]
3 ~ Database owner to change password (owner) . []
4 - Message language (language) ............... [E]
5 - BRCONNECT command line (command) .......... [-p initDEV.sap -l E -f chpass]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.41
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRCONNECT will be started with options '-p initDEV.sap -l E -f chpass'
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.41
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2010-01-15 10.29.49
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0801I BRCONNECT 6.40 (39)
BR0280I BRCONNECT time stamp: 2010-01-15 10.29.52
BR0263I Enter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.34.58
BR0263I Reenter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.35.57
BR0482W The passwords entered must be identical
BR0280I BRCONNECT time stamp: 2010-01-15 10.35.57
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
c
BR0280I BRCONNECT time stamp: 2010-01-15 10.36.31
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRCONNECT time stamp: 2010-01-15 10.36.31
BR0263I Enter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.37.03
BR0263I Reenter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.08
BR0482W The passwords entered must be identical
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.08
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.11
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
c
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.14
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.14
BR0263I Enter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.16
BR0263I Reenter password for database user 'SAPDEV' (maximum 8 characters):
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.18
BR0829I Password changed successfully in database for user SAPDEV
BR0830I Password changed successfully in table OPS$DEVADM.SAPUSER for user SAPDEV
BR0280I BRCONNECT time stamp: 2010-01-15 10.38.18
BR0803I BRCONNECT completed successfully with warnings
BR0292I Execution of BRCONNECT finished with return code 1
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
BR0280I BRTOOLS time stamp: 2010-01-15 10.38.18
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2010-01-15 10.38.44
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRTOOLS time stamp: 2010-01-15 10.38.44
BR0656I Choice menu 2 - please make a selection
Additional BR*Tools functions
1 = Show profiles and logs
2 - Clean up DBA logs and tables
3 - Adapt NEXT extents
4 + Change password of database user
5 - Create/change synonyms for DBA tables
6 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:

Restore Oracle with brtools to a Windows server with different disk structure

Hello gurus,
Is it possible to restore Oracle to a Windows machine that has different disk structure than a source machine?
E.g. source machine had disks C:, D:, E: (on which Oracle data files were distributed), but a target machine has only disk C:
Database is backuped with brtools.

Hi
I did some mass changes using a script... to be honest I'm not sure if I did it to restore FROM a different location, or TO a different location.
You could also use Brrestore option -m|-mode to restore the datafiles to a new location.
Check online help -m|-mode - SAP Database Guide: Oracle (BC-DB-ORA-DBA) - SAP Library
For instance the here under command will restore datafiles #10 to #20 to the /tmp directory
brrestore -u / -b beokfyeu.pnd -c -m 10-20=/tmp
You could find datafile ID by querying view dba_data_files
select FILE_ID, FILE_NAME, TABLESPACE_NAME from DBA_DATA_FILES;
Regards

Restore with brtools - need more archive redolog files

Good day
I will make online backup my oracle database with brtools
(Oracle 10g, BRBACKUP 7.00 (39))
brbackup -c -d util_file_online -t online -m all -u /
bdztoexw anf 2009-01-23 15.27.40 ; 2009-01-23 16.47.21 ; 1 ............... 57 56 0 17671 226215105 17676 226268039 ALL
online util_file_online -
7.00 (39)
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.38
BR0232I 57 of 57 files saved by backup utility
BR0230I Backup utility called successfully
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.40
BR0340I Switching to next online redo log file for database instance VPP ...
BR0321I Switch to next online redo log file for database instance VPP successful
BR0117I ARCHIVE LOG LIST after backup for database instance VPP
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/VPP/oraarch/VPParch
Archive format %t_%s_%r.dbf
Oldest online log sequence 17673
Next log sequence to archive 17676
Current log sequence 17676 SCN: 226268039
Database block size 8192 Thread: 1
Current system change number 226268041 ResetId: 603135330
After brbackup I'll do "brarchive" in the same script:
brarchive -c -d util_file -sd -u / > $br_out_file
#ARCHIVE.. 17670 /oracle/VPP/oraarch/VPParch1_17670_603135330.dbf ; 2009-01-23 15.10.36 ; 43450368 226202112 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17671 /oracle/VPP/oraarch/VPParch1_17671_603135330.dbf ; 2009-01-23 15.36.12 ; 43430912 226215105 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17672 /oracle/VPP/oraarch/VPParch1_17672_603135330.dbf ; 2009-01-23 15.40.27 ; 43515904 226227928 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17673 /oracle/VPP/oraarch/VPParch1_17673_603135330.dbf ; 2009-01-23 15.41.06 ; 43729408 226238784 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17674 /oracle/VPP/oraarch/VPParch1_17674_603135330.dbf ; 2009-01-23 16.06.06 ; 43450368 226250315 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17675 /oracle/VPP/oraarch/VPParch1_17675_603135330.dbf ; 2009-01-23 16.43.40 ; 13243904 226263012 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
VPP util_file adztolzu svd 2009-01-23 16.47.22 ; 2009-01-23 16.54.47 ; 1 ........... 17670 17675 0 0 ------- 7.00 (39) @0603135330
BR0280I BRARCHIVE time stamp: 2009-01-23 16.51.11
BR0232I 6 of 6 files saved by backup utility
BR0230I Backup utility called successfully
BR0016I 6 offline redo log files processed, total size 220.128 MB
Then I take tape with this data and try restore only from this tape
all datafiles and relevant archive redologs files (17670-17675) restored without errors
but in the end ERROR occurred
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/VPP/sapdata1/system_1/system.data1'
ORA-00279: change 226268039 generated at 01/23/2009 16:43:40 needed for thread
1
ORA-00289: suggestion : /oracle/VPP/oraarch/VPParch1_17676_603135330.dbf
ORA-00280: change 226268039 for thread 1 is in sequence #17676
My online backup ended, before switch to redolog 17676
Why I need this file? I think files (17670-17675) should be enough?
Besides, the change 226268039 generated exactly at moment Switching to next online redo.
Can I try open database regardless of this error?
Thank you for your prompt response
Andrey Timofeev
Edited by: Andrey Timofeev on Jul 21, 2009 3:52 PM

Good day, sorry for TAG. Once more time. 
I will make online backup my oracle database with brtools 
(Oracle 10g, BRBACKUP 7.00 (39))
brbackup -c -d util_file_online -t online -m all -u /
<HR>
bdztoexw anf 2009-01-23 15.27.40 2009-01-23 16.47.21 1 ............... 57 56 0 17671 226215105 17676 226268039 ALL 
online util_file_online 
<HR>
 BR0280I BRBACKUP time stamp: 2009-01-23 16.43.38
<HR>
 
BR0232I 57 of 57 files saved by backup utility 
BR0230I Backup utility called successfully
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.40 
BR0340I Switching to next online redo log file for database instance VPP ... 
BR0321I Switch to next online redo log file for database instance VPP successful
BR0117I ARCHIVE LOG LIST after backup for database instance VPP
Parameter Value
Database log mode Archive Mode 
Automatic archival Enabled 
Archive destination /oracle/VPP/oraarch/VPParch 
Archive format %t_%s_%r.dbf 
Oldest online log sequence 17673 
Next log sequence to archive 17676 
Current log sequence 17676 SCN: 226268039 
Database block size 8192 Thread: 1 
Current system change number 226268041 ResetId: 603135330
<HR>
 
After brbackup I'll do "brarchive" in the same script:
brarchive -c -d util_file -sd -u / > $br_out_file
<HR>
#ARCHIVE.. 17670 /oracle/VPP/oraarch/VPParch1_17670_603135330.dbf 2009-01-23 15.10.36 43450368 226202112 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17671 /oracle/VPP/oraarch/VPParch1_17671_603135330.dbf 2009-01-23 15.36.12 43430912 226215105 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17672 /oracle/VPP/oraarch/VPParch1_17672_603135330.dbf 2009-01-23 15.40.27 43515904 226227928 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17673 /oracle/VPP/oraarch/VPParch1_17673_603135330.dbf 2009-01-23 15.41.06 43729408 226238784 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17674 /oracle/VPP/oraarch/VPParch1_17674_603135330.dbf 2009-01-23 16.06.06 43450368 226250315 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17675 /oracle/VPP/oraarch/VPParch1_17675_603135330.dbf 2009-01-23 16.43.40 13243904 226263012 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
VPP util_file adztolzu svd 2009-01-23 16.47.22 2009-01-23 16.54.47 1 ........... 17670 17675 0 0 
<HR>
#
<HR>
BR0280I BRARCHIVE time stamp: 2009-01-23 16.51.11 
BR0232I 6 of 6 files saved by backup utility 
BR0230I Backup utility called successfully 
BR0016I 6 offline redo log files processed, total size 220.128 MB
<HR>
Then I take tape with this data and try restore only from this tape 
all datafiles and relevant archive redologs files (17670-17675) restored without errors 
but in the end ERROR occurred
<HR>
 
ERROR at line 1: 
ORA-01195: online backup of file 1 needs more recovery to be consistent 
ORA-01110: data file 1: '/oracle/VPP/sapdata1/system_1/system.data1'
ORA-00279: change 226268039 generated at 01/23/2009 16:43:40 needed for thread 
1 
ORA-00289: suggestion : /oracle/VPP/oraarch/VPParch1_17676_603135330.dbf 
ORA-00280: change 226268039 for thread 1 is in sequence #17676
<HR>
 
My online backup ended, before swith to redolog 17676 
Why I need this file? I think files (17670-17675) should be enough?
Besides, the cange 226268039 generated exactly at moment Switching to next online redo. 
Can I try open database regardless of this error?
 
Thank you for your prompt response 
Andrey Timofeev
Edited by: Andrey Timofeev on Jul 21, 2009 4:53 PM
Edited by: Andrey Timofeev on Jul 21, 2009 4:54 PM

Database restore problem with BRTOOLS

Hi Experts,
I am tring to migrate an SAP system from host A to host B.
OS: windows server 2003 DB: oracle 10g
Homogeneous migration.
The database were backed up with BRTOOLS (whole database offline backup) to Location L:\QCO_BCK @hostA
After that I moved folder QCO_BCK together with folder "sapbackup" from hostA to hostB, placed under F:\QCO_BCK
And then start to perform "whole database reset" with BRTOOLS, but BRTOOLS can not verify the datafile/control files since they are under different location(hostA and hostB), So, I modified initQCO.ora and the BRTOOLS log file begprhrg.afd, all the relevant directories were changed from L:\ to F:\, after trying again, BRTOOLS performed well, all datafiles, redo logs, control files were copied to the right location, but problems encountered at step 7 - "open database and post-processing", BRTOOLS returns oracle error message:
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'H:\oracle\QCO\sapdata5\system_1\SYSTEM.DATA1'
database can be mounted but can not be open.
I think this is because the control file is the old one which records the old file locations in hostA, in hostA, file SYSTEM.DATA1 actually located under H:\ but in hostB, it is copied under D:\
My question is:
1. Is it obligatory by BRTOOLS that the file structure on hostB(new) must be totally the same as hostA(old)? if the file (for example) SYSTEM.DATA1 is located at H:\ of hostA, then, in new hostB, it must be located at the same directory H:\?
2. Is there any workaround to open the database in this situation? like modifing the control file?
Thank you in advance.
Freshman

Hi Sunny and Juan,
Thanks so much for your valuable information for me.
Yes, before restoring the DB, I used oraBRCopy tool to generate CONTROL.SQL and CONTROL.TRC file. But I didn't execute CONTROL.SQL after that. I'd like to know which timepoint should I execute it to generate the new control file? (file directory had already been corrected within CONTROL.SQL). is it before doing step 7: open database and post-processing, I should open a new command windows to enter SQLPlus to execute CONTROL.SQL? I tried to do this:
SQL>conn / as sysdba
Connected to an idle instance.
SQL>@C:\CONTROL.SQL
Oracle instance started
Total system global area xxx bytes
Fixed size xxx
varianble size xxx
Control file created.
SQL>alter database open;
alter database open
Error at line 1
ORA-01589 must use RESETLOGS or NORESETLOGS option for database open.
SQL>alter databse open resetlogs;
Error at line 1
ORA-01092: oracle instance terminated.Disconnected forced.
Strange thing is, in my last trial, when I execute step 7: open database and post processing, BRRECOVER gives me two sub options:
1 ~ Reset logs option (reset_logs) ..[resetlogs]
2 * Open databse command (command) .[alter database open resetlogs]
the final result is:
ORA-01139: Resetlogs option only valid after and incomplete database recovery.
I am not familiar with oracle db and is totally confused/frastrated now... Please kindly help.
Thank you very much
Freshman

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Oracle Portal 11.1.1.6 with OAM 11.1.1.5

Hi All,
I have the following customer requirement.
Oracle Portal 11.1.1.6 which is deployed on WebLogic Server 10.3.6
Oracle Access Manager 11.1.1.5.0
Oracle Internet Directory 11.1.1.6.0
The customer wants to have Single Sign On for the Oracle Portal Application. This is my understanding about the Architecture.
Oracle HTTP Server (with WebLogic Proxy Plug-in) talks to Oracle Portal
Oracle HTTP Server (the same above with WebGate) talks to Oracle Access Manager
Oracle HTTP Server has Oracle Web Cache
Oracle Access Manager talks to OID
Oracle Portal talks to OID with OID Authenticator
When I went through the Oracle Portal documents, they give steps for Oracle Portal which is deployed on Oracle Application Server but not with WebLogic.
My questions
1) Do I need to configure OID Authenticator at myrealm of WebLogic Domain (which hosts Oracle Portal) to connect to OID?
2) Is there anything more I need to do to integrate Oracle Portal with OID (Meaning running pl/sql scripts or any)?
3) Kindly advice me about the flow of Oracle HTTP Server, Oracle Web Cache, Oracle Web Gate to OAS and Oracle Portal?
Thank you
Regards,
Somerset

user8901406 wrote:
Hi Somerset,
I am going through the similar problems as you are so was able to find some high level answers (although still have problems implementing.)
As for the questions:
1.
Yes, you can check the details here:
http://docs.oracle.com/cd/E17904_01/webcenter.1111/e12405/wcadm_security_sso.htm#WCADM8176
Chapter 30.2.4.1 Configuring the Oracle Internet Directory Authenticator, item 9)
2.
This is in no way a complete list, as it is still not working for me, but some of it:
OAM:You need to set up host identifier, resources(urls) to protect, define schemas and policies
OHS: Need to set portal name in mod_wl_ohs.CONF
Domain-level jps-config.xml: Needs to be set as per
http://docs.oracle.com/cd/E15586_01/doc.1111/e15478/opssadf.htm, appendix c,
Example C-1 Sample SSO Configuration for OAM 11g
3.
This graphic explains it I believe:
Same doc as above, at the beginning.
Figure 30-1 OAM Single Sign-On Components and Topology
You can also check the thread I have started describing my setup/issue:
OHS/OAM/Portal SSO integration - mod_wl_ohs.conf problem
Hope this helps!
ZoranZoran,
What you are tryiing to accomplish is the different than what Somerset's. Yours is the Oracle webcenter portal vs. Somerset's is the Oracle Portal.
For The road map of Oracle Portal integrating with Oracle Access Manager there is no other way than what I explained. ;)

Oracle 11.2.0.2g driver with IBM JRE(J2RE 1.5.0 IBM J9 2.3 Linux x86-32)

Hi All,
I am trying to use oracle 11.2 jdbc thin driver with IBM JRE and getting following exception messages.
Details from Ojdbc5.jar
Implementation-Version: 11.2.0.2.0
Repository-Id: JAVAVM_11.2.0.2.0_LINUX_100812.1
And Details from Java System Properties
java.vm.info: J2RE 1.5.0 IBM J9 2.3 Linux x86-32 j9vmxi3223-20060504 (JIT enabled)
J9VM - 20060501_06428_lHdSMR
JIT - 20060428_1800_r8
GC - 20060501_AA
java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:195)
at javax.crypto.Cipher.getInstance(Unknown Source)
at oracle.security.o5logon.O5LoginClientHelper.decryptAES(Unknown Source)
at oracle.security.o5logon.O5LoginClientHelper.generateOAuthResponse(Unknown Source)
at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:655)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:366)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:38)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:294)
at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:1247)
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1221)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:111)
at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:77)
at com.tes.archival.extractor.DataExtractorWithJdbcImpl.extractArchivalRecords(DataExtractorWithJdbcImpl.java:61)
at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:57)
at com.tes.archival.executor.ExtractorExecutor$1.call(ExtractorExecutor.java:1)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:284)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
at java.lang.Thread.run(Thread.java:797)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>(Unknown Source)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:177)
... 24 more
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.access$600(Unknown Source)
at javax.crypto.b$0.run(Unknown Source)
at java.security.AccessController.doPrivileged(AccessController.java:241)
... 27 more
Any help in resolving this issue will be much appreaciated.
Regards,
Raman

804915 wrote:
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!Probably a permissions problem. Or something is wrong with the certs.

Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed

Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
Sujith

Hi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios

Is Oracle Apex 4.2.3 certified with Oracle EBS 12.1.3?

Is Oracle Apex 4.2.3 certified with Oracle EBS 12.1.3?

Yes it is certified as outlined in the Extending Oracle E-Business Suite Release 12 Using Oracle Application Express white paper.
Within this white paper the Prerequisites listed are:
Oracle E-Business Suite 12.1.3 or above
Oracle E-Business Suite Patch 12316083
{Go to My Oracle Support Patches & Updates: https://updates.oracle.com/Orion/PatchSearch/process_form?bug=12316083}
Fully Licensed Oracle Database1, Release 10.2.0.3 or above
Oracle Application Express 4.0 or above
The white paper is available from APEX OTN Page > Collateral > White Papers or from My Oracle Support (Note 1306563.1).

What is the use of profiles in oracle apps,could u pls explain with examples

what is the use of profiles in oracle apps,could u pls explain with examples

1b5595eb-fcfc-48cc-90d2-43ba913ea79f wrote:
what is the use of profiles in oracle apps,could u pls explain with examples
http://www.appspatrols.com/now/blog/understanding-profile-options-in-oracle-apps-oracle-e-business-suite
http://www.oracle.com/pls/ebs121/search?word=Profile+Options&format=ranked&remark=quick_search
Thanks,
Hussein

Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?

I'm new to Oracle. I have installed Oracle SQL Developer 3.0.04 and Java 1.7. When I run Oracle SQL Developer, I will get the window Running this product is supported with minimum Java version of 1.6.0_04 and a maximum version less than 1.7. This product will not be supported....
Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?
I have already downloaded Java 1.6 but don't know whether I need to uninstall Java 1.7 first. If don't need to uninstall Java 1.7, how can I set Oracle SQL Developer to run with Java 1.6?
Thanks for any help.
Edited by: 881656 on Aug 25, 2011 11:22 AM

Hi,
One prior post discussing the use of Java 7 is:
SQL Developer 3.0 and Java SE 7?
There is no need to uninstall any Java version (except if you have disk space constraints) and no problem switching between Java versions. This may be controlled in the sqldeveloper.conf file in your ...\sqldeveloper\sqldeveloper\bin directory via the SetJavaHome line. For example:
#SetJavaHome ../../jdk
SetJavaHome C:/Program Files/Java/jdk1.6.0_26
#SetJavaHome C:/Program Files/Java/jdk1.7.0Regards,
Gary Graham
SQL Developer Team

Oracle Database10g Express Edition's compatibility with Forms/Reports 10g

hi,
I have a problem while connecting from Oracle Forms/Reports 10g to Oracle Database10g Express Edition.I have configured through the net configuration assistant and it shows the test is also successful. But while connecting from Oracle Forms/Reports 10g, an error is being displayed saying that the TNS could not resolve service name(ORA - 012154). I am able to connect to my database server normally. I got a doubt now regarding Oracle Database10g Express Edition's compatibility with Oracle Developer Suite 10g. Can I use Oracle Database10g Express Edition as backend for Forms/Reports 10g in a stand alone machine.
Can anyone please give me a solution regarding my issue.
Thanks in advance.
RAKESH

12154 means that the TNSNAMES.ora that reports is using does not understand what the '@XE' means.
Check that you do not have several different TNSNAMES.ora files - there are probably several, and the one you are using probably does not point to XE. This is the most common cause I've seen.

Installing Oracle 9i client on remote PC with out using distrib on cd-rom

Hello!
I have a such problem. I must install oracle client on a remote PC with no user assistant (with out usin cd-rom, I must use distrib from local hard drive).
When I trying to launch setup file ORACLE 9i from Hard drive I have an error abut using java.
So that I want to ask. may be some one knew ho to install Oracle 9i client from distrib which dispose on local hard drive???

Hi,
The minimum supported version for windows 7 is 10.2.0.5. Unsupported version may work, but it will create unexpected issues.
How to Install Oracle 10gR2 on MS Windows 7/Windows 2008R2 (Doc ID 1173433.1)
Thanks,
Krishna

Oracle 8.1.7.4.0 with Brtools 620

Similar Messages

Maybe you are looking for