Oracle 8.1.7 client install fails to run

Hi,
Hopefully someone else has seen this problem.
I'm trying to install 8.1.7 client onto a Win2K SP2 machine, but
I can't get the installer to run. There's no error message, no
event logs or anything. I've also tried running the universal
installer directly from the install\win32\ directory, but that
does nothing either.
Any clues or pointers would be greatly appreciated,
Thanks,
Duncan.

Hi,
I faced a problem that I want a Oracle8 driver for Linux, so I
can connect my DB that installed in NT from Linux, I see that
you face the same problem, I hope you find a solution, so could
you please help me in this, should I install Oracle in the
Linux, or not, from where can I install every thing.
Thanx,
Ahmed.

Similar Messages

Oracle 9i client install fails to load disk 3

I downloaded the Oracle 9.2 database software from OTN. I'm trying to install the 9i client from this software. I've extracted the disk1, disk2, disk3 to separate directories. I run the install from disk1 and it gets about 90% into the install, then it requests disk 3. When the "Disk Location" dialog box comes up I set the path to the appropriate location for disk 3. Then I click OK. The OUI comes right back with the same dialog box. I have verified that the path to disk is correct. Any ideas? The install cannot get past this.

Negative. The installer only asks for disk 3. I'm installing from the Oracle 9.2 Enterprise Edition download. I'm just choosing to install the client. I just figure for a client install, it doesn't need to access the contents of disk 2. Incidentally, even if I direct the installer at disk 2, I receive the same results. Nothing happens.

No classes12.zip included with Linux Oracle 8.1.7 client install??

I noticed on the linux client install - it includes a
lclasses11.zip, but this is not the JDBC classes that come with
Windows clients.
1.) What is the lclasses11 or 12.zip files for?
2.) Do I need to copy Windows client classes12.zip, etc to a
linux client? What aren't these included?
Thanks
CHris

Hi,
I faced a problem that I want a Oracle8 driver for Linux, so I
can connect my DB that installed in NT from Linux, I see that
you face the same problem, I hope you find a solution, so could
you please help me in this, should I install Oracle in the
Linux, or not, from where can I install every thing.
Thanx,
Ahmed.

Cisco VPN client install fails with Error 1722 on Windows 7

Hi,
I am having issues with laptops upgraded from Vista to Windows 7.
Prior to the upgrade they are running Cisco VPN Client 5.0.05.0290. These laptops also have Juniper Network Connect 6.5 and Citrix web client installed. The windows upgrade advisor made no recommendations regarding uninstalling / reinstalling these apps.
I have done an inplace upgade to Windows 7 (Windows Vista Enterprise 32bit to Windows 7 Enterprise 32 bit) and after the install the Cisco client is not working. Uninstalled the client (the uninstall was successful) then reinstalled and the installation fails at Installing Cisco Systems Virtual Adapter - error 1722 there was a problem with the windows installer package.
I have followed the steps for a manual uninstall of the Cisco client and then tried the install again - still not successful. Interestingly (or not) the Juniper Network Connect also fails with the error The Network Connect Virtual adapter driver is not installed properly. This also fails to reinstall after being removed.
I tried removing the VPN clients on another laptop and then running the upgrade but the same errors occured when reinstalling the VPN Client. I have tried the Winfix and DNE patch from Citrix but these fail saying there is a corruption in the application.
On another laptop where only the Cisco VPN client was installed a reinstall was required after the upgrade, but it did install successfully.
On a clean image these applications all install fine, however I have a large number of laptops do upgrade and don't want to do a fresh install and settings migration on all of them.
What files / registry entrys are involved with the DNE adapter so I can manually clear it all out before reinstalling?
Anything else I can do to troubleshoot this issue?
Cheers,
James

You should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi
(Using Shrew VPN is a possible workaround.)

Adding RBS To 3-Tier Farm: Client Install Fails

Hello Forums Folks:
Am running into two issues I cannot seem to get past though all indications are I am following steps and getting good results - to a point. Please see the steps/results below, I would be appreciative if you could point out what the issues are.
I am following a couple of articles online to add BLOB feature into my SP2013 3-tier farm:
1 WFE (CORDTESTWEB1), 1 DB/FILE (CORDTESTDB1) & 1 APP (CORDTESTSPAPP1).
Ran the FILESTREAM setup on SQL Server Config Manager - ran OK.
COMMANDS ON SQL SERVER ALL RAN TO COMPLETION
use [WSS_Content]
if not exists
(select * from sys.symmetric_keys
where name = N'##MS_DatabaseMasterKey##')
create master key encryption by password = N'Admin Key Password !2#4'
use [WSS_Content]
if not exists
(select groupname from sysfilegroups
where groupname=N'RBSFilestreamProvider')
alter database [WSS_Content]
add filegroup RBSFilestreamProvider contains filestream
use [WSS_Content]
alter database [WSS_Content]
add file (name = RBSFilestreamFile, filename =
'C:\WSS_CONTENT_RBS')
to filegroup RBSFilestreamProvider
INSTALL RBS CLIENT ON FIRST FARM WEBSERVER & DB SERVER
Command was run on server CORDTESTDB1 first, then onto first WFE server CORDTESTWEB1
msiexec /qn /lvx* rbs_install_log.txt /i RBS.msi TRUSTSERVERCERTIFICATE=true FILEGROUP=PRIMARY DBNAME="WSS_Content" DBINSTANCE="MSSQLSERVER" FILESTREAMFILEGROUP=RBSFilestreamProvider FILESTREAMSTORENAME=FileStreamStore
In both cases the log file showed the command run successfully and the program shows in Control Panel/Programs & Features. But none of the tables were created on WSS_Content database.
INSTALL RBS CLIENT ON ALL OTHER WEB/APP SERVERS
Am waiting to get past first hurdle above before I run on add'l servers.
msiexec /qn /lvx* rbs_install_log.txt /i RBS.msi DBNAME="WSS_Content" DBINSTANCE="MSSQLSERVER" ADDLOCAL="Client,Docs,Maintainer,ServerScript,FilestreamClient,FilestreamServer"
ENABLE RBS FOR EACH CONTENT DB
Run on WFE CORDTESTWEB1
The two commands below worked
$cdb = Get-SPContentDatabase WSS_Content
$rbss = $cdb.RemoteBlobStorageSettings
This command shows as Failed
$rbss.Installed()
Did not proceed with these commands
$rbss.Enable()
$rbss.SetActiveProviderName($rbss.GetProviderNames()[0])
$rbss
I confirmed that the domain admin account being used is listed as a Local Admin on each server.

UPDATE - I was able to get the RBS client installed on SQL Server 2012. Saw an article online and did regular install of the RBS.msi (x64) client and then ran the command-line. WSS_Content database now has the tables related to RBS (rbs_filestream_configuration,
etc).
But looks like I am still getting nowhere - now I cannot install the RBS client successfully on the first webserver.
Any ideas?

App-V 5 client install fails on prerequisite

I have manually installed Visual C++
2010 Redistributable on a test Windows 7 x64 client. I am now trying to install the App-V 5 client on the same machine. The installation fails.
The error says, "Microsoft App V Client 5.0 x64 requires Microsoft Visual C++ 2005 Redistributable (x86) with minimum version 8.0.61001"
I then manually installed Microsoft Visual C++
2005 SP1 Redistributable x86 on the system. When I try installing the AppV 5 client it still fails with the same error.
Why does the AppV client install routine fail to detect that Visual C++ is installed? Anybody know how I can troubleshoot this?
Thanks!
FP

You need an updated version, try these:
http://www.microsoft.com/en-us/download/details.aspx?id=5638
http://www.microsoft.com/en-us/download/details.aspx?id=14431
http://www.microsoft.com/en-us/download/details.aspx?id=26347
Install both x86 and x64 on a 64bit OS.

Client Install Fails - Unable to get Win32_OperatingSystem object

I have a PC that won't install the SCCM client via Client Push. In the CCM.Log file on the site server, it connects to the IPC$ and admin$ shares using my client installation account, but then it comes back with this error:
---> Unable to get Win32_OperatingSystem object from WMI on remote machine "PCNAME", error = 0x80080005.
I know that error means that access was denied to WMI, and I verified that when I run wbemtest manually (using the same client installation account), I can connect to the root\cimv2 object on that PC but when I try to enumerate the instances of the Win32_OperatingSystem object, I get the same error.
I also tried using Computer Management applet (remotely - I have no local access to this PC) to look at the WMI Control properties. Again, I get the same access denied error so I can't check/change the security permissions that way.
I have verified that my client installation account is in the local Administrators group of the PC. I've already tried rebuilding the WMI repository - that worked but it didn't fix the access issue. I know I can install the client manually but I'm guessing I'd still have a problem with inventories, etc. that are dependent on access to that WMI object. Any suggestions about how to go about fixing the WMI access issue?
Thanks so much, --Jo

Finally getting back to this issue after vacaton... sigh.
I got a little further. I took client push out of the mix and ran ccmsetup.exe locally on the PC. This time the client installation ran. However, I'm still getting a similar error from the client itself and the client is not talking to the site. After the client was installed, only about 10 of the log files showed up in system32\ccm\logs.
ccmexec.log shows this error:
Endpoint'PolicyAgent_PolicyEvaluator' return 0x80070057 from event notification
PolicyAgentProvider.log has these lines repeating:
Failed to create actual config class for 'CCM_RootCACertificates'
Failed to update namespace 'Machine' (80041002)
Successfully updated namespace 'DefaultMachine'
Successfully updated namespace 'DefaultUser'
Failed to create actual config class for 'CCM_MulticastConfig'
Failed to update namespace 'Machine' (80041002)
PolicyEvaluator.log has this error:
Received notification that Local policy has changed.
Failed to trigger Machine settings update (80070057)
SrcUpdateManager has these errors:
Instance of CCM_SourceUpdateClientConfig doesn't exist in WMI
Failed to get instance of CCM_SourceUpdateHistory, error 80041002
ClientIDManagerStartup.log has these errors:
GetSystemEnclosureInfo failed (0x80080005)
ComputeHardwareID failed (0x80080005).
RegTask: Failed to create registration request body. Error: 0x80080005
The rest of the logs that exist (LocationServices, StatusAgent, ClientLocation, RemCtrl, and setuppolicyevaluator) appear to be OK.
These seem to all be WMI-related errors/issues, but I can't find any specific information on any SCCM/SMS websites/forums that address these particular errors in these particular log files. I've tried rebuilding the repository (several times), I've done the regsvr stuff as discussed above, etc.
I ran WMIDIAG next. It ran for a little less than two hours - not sure if that's normal or not, but the log file continued to update the entire time. Now I have this log file and I'm not sure what to do with the issues I found. I'm looking at the WMI REPORT: BEGIN section... I see instructions that make sense for most of the errors. However, the section of log file below shows the area that is most likely causing issues for SCCM because it is the same error I get on the client install. I have no idea how to fix this stuff - any help would be appreciated:
31997 14:20:05 (1) !! ERROR: WMI ENUMERATION operation errors reported: .......................................... 33 ERROR(S)!
31998 14:20:05 (0) ** - ROOT/CIMV2, InstancesOfAsync, CIM_USBDevice, 0x80080005 - .
31999 14:20:05 (0) ** - ROOT/CIMV2, InstancesOfAsync, CIM_USBHub, 0x80080005 - .
32000 14:20:05 (0) ** - ROOT/CIMV2/SMS, InstancesOfAsync, SMS_Class_Template, 0x80041011 - (WBEM_E_PROVIDER_NOT_FOUND) Provider referenced in the schema does not have a corresponding registration.
32001 14:20:05 (0) ** - Root/Default, InstancesOf, SystemRestore, 0x80080005 - Server execution failed.
32002 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Process, 0x80080005 - Server execution failed.
32003 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_OperatingSystem, 0x80080005 - Server execution failed.
32004 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_ComputerSystem, 0x80080005 - Server execution failed.
32005 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Service, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32006 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Bios, 0x80080005 - Server execution failed.
32007 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_IP, 0x80080005 - Server execution failed.
32008 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_TCP, 0x80080005 - Server execution failed.
32009 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_UDP, 0x80080005 - Server execution failed.
32010 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_ICMP, 0x80080005 - Server execution failed.
32011 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Cache, 0x80080005 - Server execution failed.
32012 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Memory, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32013 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Objects, 0x80080005 - Server execution failed.
32014 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_PagingFile, 0x80080005 - Server execution failed.
32015 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Processor, 0x80080005 - Server execution failed.
32016 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_System, 0x80080005 - Server execution failed.
32017 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfProc_Process, 0x80080005 - Server execution failed.
32018 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfProc_Thread, 0x80080005 - Server execution failed.
32019 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_IP, 0x80080005 - Server execution failed.
32020 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_TCP, 0x80080005 - Server execution failed.
32021 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_UDP, 0x80080005 - Server execution failed.
32022 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_ICMP, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32023 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Cache, 0x80080005 - Server execution failed.
32024 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Memory, 0x80080005 - Server execution failed.
32025 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Objects, 0x80080005 - Server execution failed.
32026 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_PagingFile, 0x80080005 - Server execution failed.
32027 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Processor, 0x80080005 - Server execution failed.
32028 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_System, 0x80080005 - Server execution failed.
32029 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfProc_Process, 0x80080005 - Server execution failed.
32030 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfProc_Thread, 0x80080005 - Server execution failed.
32031 14:20:05 (0) **
32032 14:20:05 (1) !! ERROR: WMI EXECQUERY operation errors reported: ............................................ 17 ERROR(S)!
32033 14:20:05 (0) ** - Root/Default, SELECT * FROM SystemRestore, 0x80080005 - Server execution failed.
32034 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_LogicalDisk WHERE FreeSpace > 10000000 AND DriveType = 3, 0x80080005 - Server execution failed.
32035 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_PageFileUsage, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32036 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_BIOS WHERE Version IS NOT NULL, 0x80080005 - Server execution failed.
32037 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_NetworkAdapter WHERE AdapterType IS NOT NULL AND AdapterType != "Wide Area Network (WAN)" AND Description != "Packet Scheduler Miniport", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32038 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_Processor WHERE Name IS NOT NULL, 0x80080005 - Server execution failed.
32039 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DiskDrive, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32040 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_ComputerSystem, 0x80080005 - Server execution failed.
32041 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DiskPartition, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32042 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_LogicalDisk WHERE Description != "Network Connection", 0x80080005 - Server execution failed.
32043 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_SoundDevice, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32044 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_VideoController, 0x80080005 - Server execution failed.
32045 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_USBController, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32046 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DesktopMonitor, 0x80080005 - Server execution failed.
32047 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_PointingDevice WHERE Status = "OK", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32048 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_Keyboard, 0x80080005 - Server execution failed.
32049 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_SystemDriver WHERE StartMode != "Disabled", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32050 14:20:05 (0) **
32051 14:20:05 (0) ** WMI PUT operations: ........................................................................ OK.
32052 14:20:05 (0) ** WMI DELETE operations: ..................................................................... OK.
32053 14:20:05 (0) ** WMI GET VALUE operations: .................................................................. OK.
32054 14:20:05 (0) ** WMI static instances retrieved: ............................................................ 1541.
32055 14:20:05 (0) ** WMI dynamic instances retrieved: ........................................................... 0.
32056 14:20:05 (0) ** WMI instances request cancellations (to limit performance impact): ......................... 0.
32057 14:20:05 (0) **
32058 14:20:05 (0) ** 38 error(s) 0x80080005 - (WBEM_UNKNOWN) This error code is external to WMI.
32059 14:20:05 (0) **
32060 14:20:05 (0) ** 1 error(s) 0x80041011 - (WBEM_E_PROVIDER_NOT_FOUND) Provider referenced in the schema does not have a corresponding registration
32061 14:20:05 (0) ** => This error is typically due to the following major reasons:
32062 14:20:05 (0) **    - The application queried by the WMI provider is not installed, not available or not running
32063 14:20:05 (0) **      at the time of the request was made. This error can also be generated because
32064 14:20:05 (0) **      the application supporting the providers has been uninstalled.
32065 14:20:05 (0) **    - The WMI provider binary files are not accessible (e.g. access denied ACL).
32066 14:20:05 (0) **    - A WMI provider registration problem at the CIM level (MOFCOMP.EXE) or at the COM level (REGSVR32.EXE).
32067 14:20:05 (0) **      You must re-register the WMI provider by recompiling its associated MOF file with MOFCOMP.EXE
32068 14:20:05 (0) **    Note: - If the WMI provider DLL CIM and COM registrations are correct, this error can
32069 14:20:05 (0) **            be returned because the provider has a dependency on another DLL that cannot be
32070 14:20:05 (0) **            loaded (missing or bad DLL)
32071 14:20:05 (0) **          - Dependencies can be found with the DEPENDS.EXE tool coming with the
32072 14:20:05 (0) **            Windows XP and Windows 2003 Support Tools. The command line is as follows:
32073 14:20:05 (0) **            e.g. DEPENDS.EXE <PATH><Provider.DLL>
32074 14:20:05 (0) ** => If the software has been de-installed intentionally, then this information must be
32075 14:20:05 (0) **    removed from the WMI repository. You can use the 'WMIC.EXE' command to remove the provider
32076 14:20:05 (0) **    registration data and its set of associated classes.
32077 14:20:05 (0) ** => To correct this situation, you can:
32078 14:20:05 (0) **    - Install or start the application supporting these providers.
32079 14:20:05 (0) **    - Register the providers in CIM (MOFCOMP) or DCOM (REGSVR32).
32080 14:20:05 (0) **    Note: In this case the provider should also be listed in the 'missing WMI
32081 14:20:05 (0) **          provider DCOM registrations' or in the 'missing WMI provider files' section.
32082 14:20:05 (2) !! WARNING: Re-registering with REGSVR32.EXE all DLL from 'C:\WINDOWS\SYSTEM32\WBEM\'
32083 14:20:05 (0) **          may not solve the problem as the DLL supporting the WMI class(es)
32084 14:20:05 (0) **          can be located in a different folder.
32085 14:20:05 (0) **          You must refer to the class name to determine the software delivering the related DLL.
32086 14:20:05 (0) **
Thanks, --Jo

SCCM 2012 Client Install Failing ONLY on 8.1 Machines - Advice?

Good morning,
I've got a rather interesting situation. We have a SCCM 2012 site configured for https, the site server is acting as the MP and DP, and we are installing the client via the SCCM 2012 Client GPO. Our cert is an InCommon cert. We have 4000+
Windows 7 machines that are able to install the client. We tested on a Window 8 machine and the client install works as well. Whenever a Windows 8.1 machine tries to install it fails. We have checked the boundaries (we can't specify IP ranges
since we don't manage the whole network). I can manually browse to the source files on the MP/DP. The switches we use when installing via the GPO are /usepkicert /mp:[redacted] CCMHTTPSSTATE=63 SMSSITECODE=[redacted] SMSCACHESIZE=12288. However,
it always fails with:
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="09:33:26.329+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'https://[redacted]'. Error 0x80004005]LOG]!><time="09:33:26.329+300" date="03-13-2015" component="ccmsetup" context="" type="2"
thread="12944" file="ccmsetup.cpp:11261">
<![LOG[Failed to find DP locations from MP 'https://[redacted]' with error 0x80004005, status code 403. Check next MP.]LOG]!><time="09:33:26.329+300" date="03-13-2015" component="ccmsetup" context="" type="2"
thread="12944" file="ccmsetup.cpp:11117">
<![LOG[Only one MP https://[redacted] is specified. Use it.]LOG]!><time="09:33:26.330+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="12944" file="ccmsetup.cpp:10080">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="09:33:26.330+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944" file="ccmsetup.cpp:11146">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="09:33:26.332+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="12944" file="ccmutillib.cpp:5479">
<![LOG[GET 'https://[redacted]/CCM_Client/ccmsetup.cab']LOG]!><time="09:33:26.333+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="12944" file="httphelper.cpp:807">
<![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="09:33:26.366+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944"
file="httphelper.cpp:1013">
<![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="09:33:26.366+300" date="03-13-2015" component="ccmsetup" context="" type="3" thread="12944" file="httphelper.cpp:1081">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='308' will not be sent.]LOG]!><time="09:33:26.367+300" date="03-13-2015" component="ccmsetup" context="" type="1"
thread="12944" file="ccmsetup.cpp:9763">
<![LOG['Configuration Manager Client Retry Task' is scheduled to run at 03/13/2015 02:33:26 PM (local) 03/13/2015 07:33:26 PM (UTC) time with arguments ' "/usepkicert" "/mp:[redacted]" "CCMHTTPSSTATE=63" "SMSSITECODE=AHC"
"SMSCACHESIZE=12288" /RetryWinTask:1'.]LOG]!><time="09:33:26.369+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="10100" file="wintask.cpp:315">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="09:33:26.409+300" date="03-13-2015" component="ccmsetup" context="" type="1" thread="10100" file="ccmsetup.cpp:10879">
Anyone have any idea why this is happening only on 8.1 machines? I can't think of where else to check. Thanks for any help.

Okay, so I installed via the following: ccmsetup.exe /usepkicert /source:C:\Client CCMHTTPSSTATE=63 SMSSITECODE=AHC SMSCACHESIZE=12288 and the client installed. But you're right, the CCMMessaging.log is full of https errors. I know it's
something with the cert and I've even requested new ones from the CA. However, why what is it about 8.1 that is causing the issues? Like I said, we have 4000 machines using the same client authentication cert and they work. I've cut and paste
some of the log entries. One thing to note is the \\[redacted]\sms_ahc\client\ccmsetup.exe in the beginning was using the internet FQDN. Everything else is using the intranet location. Does that provide any insight as to what is going
on?
\\[redacted]\sms_ahc\client\ccmsetup.exe /usepkicert /source:C:\Client CCMHTTPSSTATE=63 SMSSITECODE=AHC SMSCACHESIZE=12288
<![LOG[Successfully sent security settings refresh message.]LOG]!><time="12:43:12.834+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:369">
<![LOG[Successfully sent location services HTTPS failure message.]LOG]!><time="12:43:12.837+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:396">
<![LOG[Post to https://[redacted]/ccm_system_windowsauth/request failed with 0x87d00231.]LOG]!><time="12:43:12.837+300" date="03-16-2015" component="CcmMessaging" context="" type="2" thread="5452"
file="messagequeueproc_outgoing.cpp:442">
<![LOG[[CCMHTTP] ERROR: URL=https://[redacted]/ccm_system_windowsauth/request, Port=443, Options=63, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="12:45:12.880+300" date="03-16-2015" component="CcmMessaging"
context="" type="1" thread="5452" file="ccmhttperror.cpp:297">
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
DateTime = "20150316174512.883000+000";
HostName = "[redacted]";
HRESULT = "0x87d0027e";
ProcessID = 8572;
StatusCode = 403;
ThreadID = 5452;
]LOG]!><time="12:45:12.883+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="event.cpp:715">
<![LOG[Successfully sent security settings refresh message.]LOG]!><time="12:45:12.889+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:369">
<![LOG[Successfully sent location services HTTPS failure message.]LOG]!><time="12:45:12.892+300" date="03-16-2015" component="CcmMessaging" context="" type="1" thread="5452" file="ccmhttperror.cpp:396">
<![LOG[Post to https://[redacted]/ccm_system_windowsauth/request failed with 0x87d00231.]LOG]!><time="12:45:12.892+300" date="03-16-2015" component="CcmMessaging" context="" type="2" thread="5452"
file="messagequeueproc_outgoing.cpp:442">

Client install fails during OSD

Hi,
OS Deployment usually works without any issues for us. Sometimes (like 1 out of 15 deployments) the SCCM client will not install correctly and the system will boot up without any applications. That's okay, we just restart it and it works on the second attempt.
Lately however, I discovered an issue with a certain model (Lenovo R500): The SCCM client configuration now fails every time (tried four times in a row!). It wasn't that bad before...
Here are some answers to questions some of you might probably consider asking. :)
- We are using diskpart /clean at the start of every task sequence
- The system is domain joined before the SCCM client install step
- Jason Sandys ConfigMgrStartup Script (client health GPO) is active
- Client push install is active
- The BIOS is up to date
- These are our setup parameters during OSD: SMSMP=*FQDN* CCMEVALHOUR=12 PATCH="\\*FQDN*\hotfixes\configmgr2012ac-r2-kb3026739-x64.msp"
- I tried installing newer network card drivers during the OSD in case the old drivers suddenly can't handle it any more but that also didn't improve the situation
I thought maybe the GPO or the client push are interfering with the setup while running the OSD, but that also happens if the GPO is disabled. Also, the client push install never interfered with the OSD before and I don't think that it suddenly would.
I zipped and uploaded the ccmsetup.log and client.msi.log to OneDrive, I would really appreciate it if someone could take a look at the logfiles and identify any potential issue that I'm not seeing.
Logfiles: http://1drv.ms/18FTcAH
Thank you!

I just found a solution thanks to another fellow forum member that suggested I make sure that "Client Push" was not enabled. I too was experiencing intermittent failures in OSD at the "Setup Windows and ConfigMgr" step that did
not make any sense.
After a review of the ccmsetup logs on the OSD machine and ccm.log on the server I was able to see that "Client Push" was beating the TS to installing the client by 4 seconds causing the TS to fail.
Torsten indicated that Client Push and OSD can be problematic.
OSD Client Patch fails intermittently
After reviewing your ccmsetup.log I see the same evidence at time stamp 11:40:50 that I saw in my logs indicating that ccmsetup was already running when the TS went to install the client.
An instance of ccmsetup is running as a service. The current instance will be terminated. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
MSI: Aktion 11:40:50: Rollback. Aktion wird rückgängig gemacht: ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
An instance of ccmsetup is running as a service. The current instance will be terminated. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
Installation will be cancelled due to shutdown. Windows Installer will return error code 1602. ccmsetup 2/26/2015 11:40:50 AM 1920 (0x0780)
File C:\WINDOWS\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi installation was cancelled (1602) ccmsetup 2/26/2015 11:41:00 AM 1920 (0x0780)
Hi pfitchie,
I unmarked my reply as answer, it happened again and after reading your thread and this reply it all makes sense. I now disabled the Clientpush and will see what happens. Is there a possibility this is only happening if you apply CU4 during the OSD? It never
happened before.

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

Failed Oracle VM Tempalte RAC 11g deployment(Failed to run rootcrs.pl,)

I have deployed 2 nodes via the VM templates using Oracle VM Manger. But after running # ./buildcluster.sh I got an error
Configure Oracle Grid Infrastructure for a Cluster ... failed
ERROR (node:atldrmsrac01): Failed to run rootcrs.pl, status: 1
It seems that my SCAN was incorrectly configured. After fixing this error, can I run the # ./buildcluster.sh again? or do I have to do some sort of clean up before attempting to run the command again?
Edited by: 992586 on Apr 2, 2013 12:35 PM

bump please

Client Install Fails: Log: ClientIdManagerStartup - Server rejected registration request: 3

Trying to install the client onto Windows Server 2008 R2 Servers using ConfigMgr 2012R2. no PKI is being used. We do not see this issue on any workstations, only servers.
It returns the following:
Got registration response from MP. Client approval status: -1
[RegTask] - Server rejected registration request: 3 ClientIDManagerStartup
Actions taken based on other Articles:
1.Delete the c:\windows\smscfg.ini file
2) Run CCMDELCERT on the client
3) Restart the SMS agent Host service.
Result: FAILED, it comes back with the same errors.
MP_RegistrationManager.log shows:
MP Reg: Client in-band certificate is not valid due to failures in certificate chain validation, Raising status event. Failure HR = 0x800b010a, In-band Cert SubjectName = Servername - SERVER
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of MpEvent_CertInvalidChain
ClientID = "GUID:D32A0A76-E832-49B6-A431-084DB435FD83";
DateTime = "20140520175614.768000+000";
MachineName = "Servername.tes.name.com";
ProcessID = 3444;
SiteCode = "XYZ";
SubjectName = "Servername - SERVER";
ThreadID = 17368;
Win32ErrorCode = 2148204810;
MP Reg: Registration request body is invalid.
Any other ideas out there???
David Baur

Do the following to check the SMS self-signed certificates
Start MMC.exe
Add/Remove Snapin -> Select Certificates -> Select local computer
Locate the SMS folder
Find the SMS Signing certificate and SMS Encryption Cerrtificate - check if they have expired. If they have expired - delete them.
Retry client installation

Client install fails with Error 0x87d00280 on ccmsetup log file

CAS and Primary Server are on Server 2012 R2, Clients are Win 7 and Server 2008 R2 in
same Domain. Primary Server has DP and MP installed, I can successfully install client from my Primary Server through Client Push Installation. I don't see any errors on SCCM Console.
On the client side I can see C:\Windows\ccmsetup\ccmsetup.exe is installed and the "ccmsetup"
Service is not in running status.
When I checked the ccmsetup log file, the latest error message says - Have already tried all
MPs, Couldn't find DP locations. Also another line says - The Certificate Selection Criteria was not specified. There are no Certificates in "MY" store.
Do I need to install self signed Certificate through MMC snap-ins, DNS issue or I am missing
something, Please help!
Angur J Patel

is your MP set to https ? seems like its certificates issue. You can go through the documentation
https://technet.microsoft.com/en-us/library/gg682023.aspx? on how to setup PKI in sccm 2012 to check if you have created certificates as needed .
this might help you http://jackstromberg.com/2014/09/system-center-2012-r2-configuration-manager-ccmsetup-failed-with-error-code-0x87d00280/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr

Oracle 8.1.7 Client Install Response Files

Hi!
I need some help with Oracle Response files. I am trying to push out an installation package with Systems Management Server smsclitocken account not working. I need to find a way to get this package out without those priviliges (Switch User isn't available to me to use either, by policy). I need some sort of relative pathing solution. Relative pathing doesn't appear to work with the response files and their paths, but I am wondering if I am missing something. Is there an alternative in the Oracle Response files to unc and hard coding the drive letter??? If someone has some examples, I'd love to see them. Thank you for your help!!!
Jeff

Hi,
I faced a problem that I want a Oracle8 driver for Linux, so I
can connect my DB that installed in NT from Linux, I see that
you face the same problem, I hope you find a solution, so could
you please help me in this, should I install Oracle in the
Linux, or not, from where can I install every thing.
Thanx,
Ahmed.

Oracle 8i Database Configuration Assistant Install fails

the log says "Downloads\Oracle\Oracle is an invalid command line argument." Where can I correct this (path problem?)? There was no \Downloads directory at the time of install....
Thanks a lot.
Greg

Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

Oracle 8.1.7 client install fails to run

Similar Messages

Maybe you are looking for