Oracle 8.1.7 HTTP server not working error 1067

Hi
Anyone that can help will earn my undying gratitude!
I'm running my final year project on 8.1.7 RDBMS and 9i AS, using wireless and portal. At least I am if I can get it going, installing 8.1.7 RDBMS, updating the symcjit.dll to version as I'm using a P4 and get masses of java.exe errors, perl.dll, jvm.dll etc. And the http server won't start.
I really need some help with this and urgently to, can someone contact me at [email protected] please?
Desparate and disillusioned, but eternally grateful!

Sorry to be a nuisance but this is EXTREMELY urgent!
Apache server on 8.1.7 RDBMS won't start and the one in the 9iAs isn't too happy either. Do I need both of them to run wireless portals? any help really appreciated folks.
Happy Easter!
Michael.

Similar Messages

Changing port for http server not working, please help

Hi Gurus
I installed standalone hhtp server from db companion cd on AIX 5.3 10gR2.
I tested the http server URL http://XXX.XXX.XXX.com:7777/epdev/helloworld
after creating a procedure in the db and it works
But I need http server to use port 80 and not default of 7777
I did 2 changes in httpd.conf - Port 80 and Listen 80 But after this I am not
able to start http server . Can somebody tell me what am I missing here ?
I even tried starting it as root and got error as well
$HTTP_HOME/opmn/bin/opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=cov6053:6200
0 of 1 processes started.
ias-instance id=IAS-X-cov6053.6299
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=720916)
failed to start a managed process after the maximum retry limit
Log:
/export/host/thishost/unix/cen/app/oracle/product/http10.2/opmn/logs/HTTP_Server~1
The log file has this entry no error:
07/11/15 10:45:26 Start process
/export/host/thishost/unix/cen/app/oracle/product/http10.2/Apache/Apache/bin/apachectl start: execing httpd
Thanks a lot for your help

I was able to reslove this. Followed this :
On UNIX, you will hare to run as root if you want to run on ports less than 1024.
In order to run Oracle HTTP Server as root, perform the following steps:
Shutdown Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] stopproc ias-component=HTTP_Server
Change to root user. Navigate to ORACLE_HOME/Apache/Apache/bin on UNIX or ORACLE_HOME\Apache\Apache\bin on Windows and execute the following command:
chown root .apachectl
chmod 6750 .apachectl
Exit root.
Restart Oracle HTTP Server using the following command:
UNIX: ORACLE_HOME/opmn/bin> opmnctl [verbose] restartproc ias-component=HTTP_Server

AAA auth with ip http server not working

Hi all,
I am unable to get ip http server to authenticate against tacacs. attached is the debug output when logging in with the user "mark".
Router config:
aaa new-model
aaa authentication login default group tacacs+ local enable
aaa authentication login ALREADY-IN none
aaa authentication login web group tacacs+ local enable
aaa authorization exec web group tacacs+ local if-authenticated
aaa session-id common
ip http server
ip http authentication aaa login-authentication web
ip http authentication aaa exec-authorization web
the priv-lvl 15 attribute is being sent, but IP HTTP Auth fails.. any ideas why?
Cheers,
Mark
Update: Fixed it! I believe the access-enable autocommand was the cause!

Hi,
I have seen that additional attributes such as "access-enable timeout 1920" would not allow http authentication to work with certain IOS versions.
Regards,
Vivek

Two Oracle databases on one AIX Server - Note working, Pls Help

Dear Friends,
I have installed Two SAP systems with Two Oracle Databases on one AIX machine, The Installation of both the systems went fine without any errors, and also i have been able to login to both the systems seperately. (that means i cant start both the systems at a time, its one at a time)
But the problem is of the Oracle Listener, i am not able to start both the systems with single Oracle Listener processes(tnslistener). I tried all the possible scenarios as mentioned in note 98252 but nothing seems to be of any use so far.
the thing is i can start either one of the SAP Systems, But my objective is to start both the SAP Systems with one listener processes (LISTENER) and one listener port (1527)
Or
you can say i am also ready to keep two different listeners for TWO seperate Oracle databases, I tried doing so as per one of the sap notes in which you have to keep different names of listener and different numbers for listener port for second ORACLE database. I tried doing exactly mentioned in the note but yet unsuccessful...
Now i am completely lost as what is to be done since its critical i want you to immediately look into it and suggest me the appropriate solution so that i can set up both of my DEVELOPMENT and QUALITY system running...
To troubleshoot this if you require anything from my side then please feel free to ask me since our functional consultants have to soon start working on the SAP systems.
Regards
Ayush

The note you specified talk about 2 database instances not 2 databases... (I was starting to wonder how you deploy 2 databases), you can have multiple database instances on a DB. The note also give you detailed explanation of the configuration of listener.ora
Now, if this is the case and you have installed 2 instances (not databases) on the same host and configured the listener according to the note, then you should be able to call R3trans -d from both SID's.. if the R3trans fails please post the contents of trans.log here.
the thing is i can start either one of the SAP Systems, But my objective is to start both the SAP Systems with one listener processes (LISTENER) and one listener port (1527)
Then, the configuration of your listener.ora file must be incorrect.
Regards
Juan

SAP Log on into Business Objects server not working (Error FWB 00014)

Hello,
I recently installed Business Objects XI 3.1 Edge series, I am able to logon to enterprise and everything is working fine. I am even able to import roles from SAP system but I have two problems.
1. Logging on to enterprise using SAP user: I am getting the following error message when I choose SAP in the Athentication and enter SAP username and password and click log on.
"Account Information Not Recognized: All of your system's 0 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your administrator to obtain additional licenses. (FWB 00014)".
2. Logging on to SAP system through SAP Logon pad: When I enter my username and passord in SAP system from the same server as I installed BusinessObjects I am getting a run time error.
Did any one of you had the same problem or does any one of you have any clue how to solve this?
Thanks in advance.

Hi,
I assume that you have a key for named licences (You can check this in the CMC under Licence keys).
What you need to do is to go in the CMC, navigate to Authentication->SAP->Options and select the Named users option.
Regards,
Stratos

Existing HTTP server stops working after installing OWB10g

Hi,
I have upgraded an existing OWB target installation on a Win2000 server to 10G by installing the OWB SW on the server as described in the installation documentation. The target database is still v9.2.0.4. After installing OWB and restarting the server, the 9.2 HTTP server no longer starts. The error logs show that the HTTP server is trying to find some Perl libs in the new OWB home.
From what I can see, the OWB 10g installation creates a new environment variable; PERL5LIB, pointing to various catalogues in the OWB 10g home. If I remove this from the system, the HTTP server again starts normally, but I suppose this has some negative impact on OWB?
How can I get the Oracle database 9.2 HTTP server to work alongside OWB 10g?
Roald

Roald,
OWB 10g 'inherited' this bug from Oracle database 10g Bug 3585410. OWB 10g install includes 'Oracle Perl Interpreter' from Oracle 10g which creates this ENV. OWB 10g does not need this and PERL5LIB can safely be renamed without affecting OWB 10g functionality.
Nikolai Rochnik

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

Force encryption on SQL Server not working?

Hello Everyone,
I'm running SQL Server 2008 64-bit. I've installed a self-signed cert on the box and set "Force Encryption" and restarted SQL server.
I setup a client machine to trust the authority of the cert installed on the server. When I connect to that SQL server from SSMS from a client machine and select the "encrypt connection" option in the client Connection properties, SSMS correctly complains
that the cert on the server does not match the computer name I asked to log into . This is because, although the cert is trusted, the dns name dos not match the CN in the cert <- Perfect, exactly what I am expecting.
When I connect to the same SQL server from the same client but UNCHECK "encrypt connection" on the client, I'm able to login. Considering I've checked the "Force Encryption" on the server, the server should have rejected the connection. Why not?
Ameer Deen

Hi all,
We are implementing a Merge Synchronization solution which involves three SQL Servers located on three Azure locations worldwide and one on-premises location. We need to secure communications between all servers. We are evaluating the encryption of all server
communications through SSL:
http://technet.microsoft.com/en-us/library/ms191192.aspx
When we configure one server (let’s call it server A) to accept only encrypted connections (with Force Encryption=Yes) we still can connect from other server (let’s call it server B) that do not have the certificate installed. We would expect the server
B to fail in the attempt of connect as server A should only accept encrypted communications and those should need the certificated to encrypt/decrypt everything (commands and data).
We have also review the following forum post that is very similar to this one:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working
In all cases the Microsoft answer is:
“When the
Force Encryption option for the Database Engine is set to YES, all communications between client and server is encrypted no matter whether the “Encrypt
connection” option (such as from SSMS) is checked or not. You can check it using the following DMV statement”
When we run the provided DMV statement to check if encryption is enabled:
-- To check whether connections are encrypted between server and clients
SELECT encrypt_option
FROM sys.dm_exec_connections
We get “TRUE”. So theoretically encryption is enabled.
Then:
Why can we run SQL statements against server A from server B (with SSMS) without any certificate?
Are we wrong when we expect server A to refuse any client that do not have the right certificate?
How can server B, without any certificate, decrypt the data encrypted by server A?
Our intention is to encrypt all server in the same way so all of them will accept only encrypted communications. We are assuming that the Merge Agent will be able to communicate with the Publisher and the Subscriber through this encrypted environment. May
anyone please confirm ti?
Thanks for your help.
Best Regards
Benjamin Moles

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Yahoo outgoing mail server not working.

My yahoo outgoing server not working on iPod touch or iPad it says apple.smtp.yahoo failed...incoming is ok so far...this outgoing mail failure just started about a couple of days back....anyone else having this problem?????what should I do?rediffmail account does not get set up either so just unable to use any of my emails. :(

Hello, and welcome to the Discussions.
I get 100% success pinging mail.adelphia.net, and if at your home venue where Adelphia is your ISP, then I think no separate Authentication is required. Port 25 would be the proper port. However, if you are not at home, and the provider of internet connection limits you to using only authenticated SMTP then you would not able to use mail.adelphia.net as the Outgoing Server.
Are you at the venue where Adelphia is the ISP?
Ernie

TS2621 why my outgoing mail server not working after ios 6 upgraded

why my outgoing mail server not working after ios 6 upgraded

Ask your carrier to send you the settings over wifi and then install them that way.
I'm on giffgaff and I used the giffgaff app from the store to sort this out.
Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
Very Poor indeed and I held off using Apple products for years for this very reason!!

Ias console - HTTP Server - Virtual Host Error

Http server is working, but when clicked on the virtual hosts or server settings, mime settings.. the console shows this error.
An error was encountered trying to retrieve configuration data.
Failed to initialize configuration parameter ApacheMainServer.. Entity not found. Resolution: Entity not found Base Exception: The document returned by plugin "apache" is null, or does not have a root element, or does not properly formatted. Resolution: Check to see if the document is properly constructed. A document should not be null and should contain at least one root element.. Base Exception: The document returned by plugin "apache" is null, or does not have a root element, or does not properly formatted. Resolution: Check to see if the document is properly constructed. A document should not be null and should contain at least one root element.
ANYONE HAVE ANY INFO REGARDING THIS ?

You can find the port usage by executing opmnctl status -l from the command line. This should give you the port usage for each opmn-governed component. In a standard setup, web cache normally runs on port 7777 while Oracle HTTP Server runs on 7778. Alternatively, you can check the httpd.conf for the parameter Listen. This will give you the Oracle HTTP Server port as well.
Did you test with the directive NameVirtualHost added?

I can't fix the "Server Not Found" error

Ok, when I started up Firefox I was greated with a "Server not found" error, so I thougt to myself, " Ok, I'll just follow the instructions shown". Didn't help, still didn't work. So I dcided to use Internet Explorer until the issue fixed itself, didn't work. So I tried the 64 bit version, that worked. So basically what I'm trying to ask is: is there a 64 bit version to Firefox, or is another solution what i need?

Close all of your anti-virus software and restart your FF.
Also see [http://www.yanfei.info/2011/07/firefox-link-error solution of connection was reset] for more help .

HTTP 404 Not Found Error in Process Control Mail

Hi All,
I am working on version 9.3.3
I have setup e-mail alerts through a SMTP server.
When I am going on Process control and starting the cycle OR promoting to any level, I am getting a Minimized window showing HTTP 404 Not Found error and Mail is not going.
Whereas My ICP mail alerts are working fine
Please suggest something to resolve.
Regards,
Jai

Hi Jai,
Check the below documents, which might be helpful to you.
Financial Management Error "Server object error ASP 0177 : 80131040" When Sending Email Alerts (Doc ID 830823.1)
Financial Management Error "HTTP 500 Internal Server Error" in Process Management E-Mail Alerting (Doc ID 855942.1)
Process Control Email Alerts Are Not Working For Certain Entities and Entity Hierarchies (Doc ID 1160594.1)
Hope this helps,
Thank you,
Charles Babu J
Edited by: CJX on Jan 30, 2012 7:08 AM

Oracle 8.1.7 HTTP server not working error 1067

Similar Messages

Maybe you are looking for