Oracle 8.1.7 in Caldera Open Unix 8 with lkp

Hello:
Anyone had installed Oracle 8.1.7 in Caldera Open Unix 8 with LKP (Linux Kernel Personality)?
I've installed the software but I can't create a new database. I think there may be an operating system problem because I can't even get the startup nomount comand.
Any help would be great.
Thanks,
Pablo Gomez Aguilera
Twins Informatica

I've install 8.1.7, 9.0.1 and 9.2 on Caldera Open Unix 8 and UnixWare 7.1.3 with LKP without any trouble.
Check installation steps at http://www.sco.com/products/openunix/lkp/lkp_doc/LKP_oracle.html.
Regards, Vladimir.

Similar Messages

Oracle 9.2.0.2 fails open read only with java exception

Hi folks!
I hope you can help me to narrow down this issue.
I've a database running on windows 2003 64 bits. Oracle version is 9.2.0.2.
I'm experiencing the following issue:
When I try to open my database in read only mode, it crashes with ORA-604 and ORA-16000.
The trace is pointing me to some kind of connection to an SQL Server...., but, to tell truth, I'm not understandig the problem, can anyone help me?
The error itself is:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]No ResultSet set was produced.
Thanks!

I know this is not an tail -f 50 ...., but the last 100 lines are equals to the following:
"starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=12
ARC0: Archival started
ARC1 started with pid=13
ARC1: Archival started
Sun Aug 22 21:36:12 2010
ARCH: STARTING ARCH PROCESSES COMPLETE
Sun Aug 22 21:36:12 2010
ARC0: Thread not mounted
Sun Aug 22 21:36:12 2010
ARC1: Thread not mounted
Sun Aug 22 21:36:13 2010
ALTER DATABASE MOUNT
Sun Aug 22 21:36:17 2010
Successful mount of redo thread 1, with mount id 1255534413.
Sun Aug 22 21:36:17 2010
Database mounted in Exclusive Mode.
Completed: ALTER DATABASE MOUNT
Sun Aug 22 21:36:32 2010
alter database open read only
Sun Aug 22 21:36:34 2010
SMON: enabling cache recovery
Sun Aug 22 21:36:34 2010
Database Characterset is WE8ISO8859P1
Sun Aug 22 21:36:37 2010
Errors in file c:\oracle\admin\orcl\udump\orcl_ora_32704.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access"
Obviously, with the details of the startup.
One additional detail:
After that errors, I started the database on restrict mode, and it opens (I fact, this is not surprising, I was expecting that result)
I'll keep working on this....

Unable to Open unix file in UNICODE system which created NON-UNICODE system

Unable to Open unix file in UNICODE system which created in NON-UNICODE system
We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
There is a common unix directory/folder for both system.
Our requirement is to create one file on unix common folder and write the data to file from system1 .
In system2 open the same file for appending mode to write the data .
The file in system 1 created with below sentence.
OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
Now I have to append the data from system 2 to same file.
I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
cdp IGNORING CONVERSION ERRORS .
3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
Please advice suggestion to resolve this issue.
Thanks.

Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID.

Does Oracle 8.1.5 Run On Tru64 Unix 5.1

Does Oracle 8.1.7 Run On Tru64 Unix 5.1
We plan to upgrade the OS and Oracle in two steps.
1. First weekend - upgrade the operating system from Tru64 4.0d to Tru64 5.1.
2. Second weekend - upgrade Oracle from 8.1.5 to 8.1.7
Questions:
1. Will Oracle 8.1.5 run successfully on Tru64 5.1 during the one-week transition period?
2. Does it make any difference if we upgrade the OS to Tru64 5.1a instead of 5.1?
Thanks in advance,
Alan Holsted
Metro, Portland, OR.
null

A question along the same lines, does Oracle 7.3.4 run On Tru64 Unix 5.1?
We plan to upgrade the OS and Oracle in two steps.
1. Firstly - upgrade the operating system from Tru64 4.0F to Tru64 5.1 (via 5.0A).
2. Secondly - upgrade Oracle from 7.3.4 to 8.1.7 or perhaps 9.x
Questions:
1. Will Oracle 7.3.4 run successfully on Tru64 5.1 during the transition period?
2. Does it make any difference if we upgrade the OS to Tru64 5.1A instead of 5.1?
TIA
Chris

Using Unix tools with Oracle on Windows

I currently have an Oracle database installed on Windows, but would like to use Unix scripting tools and commands when connecting with my database.
Can anyone advise a good way to configure my system so that I can connect to my database from a Unix-like system?
Thanks in advance!

If getting a unix like system installed is not feasible (or is not an option), use this:
http://cygwin.com/
http://www.cygwin.com/mirrors.html
This is not exactly like running unix tools against the Oracle db, but allows you access to unix type shell for almost all of your unix shell scripting needs.
Message was edited by:
Kamal Kishore

Oracle net configuration assistant doesn´t open!

Guys, I´m trying to configure a listener, but oracle net configuration assistant isn´t opening.
Nothing happend, it simply doesn´t open!
Someone can help me to figure what it´s going on here?
thanks,
PS: Windows 7 Pro 64-bit
Oracle 11g R2

Guys, I´m trying to configure a listener, but oracle net configuration assistant isn´t opening.
Nothing happend, it simply doesn´t open!
Someone can help me to figure what it´s going on here?
thanks,
PS: Windows 7 Pro 64-bit
Oracle 11g R2

So has anyone gotten Oracle XE 10g to run on Open Suse 10.2? If how?

So has anyone gotten Oracle XE 10g to run on Open Suse 10.2? If how?

I have searched around and have seen no real answers...I will let you all if I get it working.

Opening unix executable files

What application in Leopard can I use to open unix executable files?

It seems to be a file type that is given to any file (of any sort) that has had its Execute permission set. Plain text, TIFF and font files are all showing this oddness.
You can open them via the right (command) click context menu for the file and use Open with, or use GetInfo in the same menu to set the opening program, provided you know what sort of file it's likely to be.
You can remove the Execute permission using the Unix chmod command in the Terminal, but a simpler solution is to install the FileUtilsCM context menu (free) from http://www.abracode.com/free/cmworkshop/file_utils.html
See thread http://discussions.apple.com/thread.jspa?messageID=6125826&#6125826 for related info.
DN
Message was edited by: dcnicholls

Oracle Retail 13 - Performance issues when open, save, approving worksheets

Hi Guys,
Recently we started facing performance issues when we started working with Oracle Retail 13 worksheets from within the java GUI at clients desktops.
We run Oracle Retail 13.1 powered by Oracle Database 11g R1 and AS 10g in latest release.
Issues:
- Opening, saving, approving worksheets with approx 9 thousands of items takes up to 15 minutes.
- Time for smaller worksheets is also around 10 minutes just to open a worksheet
- Also just to open multiple worksheets takes "ages" up to 10-15 minuts
Questions:
- Is it expected performance for such worksheets?
- What is your experience with Oracle Retail 13 in terms of performance while working with worksheets - how much time does it normally take to open edit save a worksheet?
- What are the average expected times for such operations?
Any feedback and hints would be much appreciated.
Cheers!!

Hi,
I guess you mean Order/Buyer worksheets?
This is not normal, should be quicker, matter of seconds to at most a minute.
Database side tuning is where I would look for clues.
And the obvious question: remember any changes to anything that may have caused the issue? Are the table and index statistics freshly gathered?
Best regards, Erik Ykema

Error WUC-14 after open a File with CLIENT_TEXT_IO.FOPEN (Oracle 10g)

Hi,
the error WUC-14 occurs during open a file with forms10g.
F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
Afterwards the error message it ist possible to write into the file and close it correctyl (without am error message - also the Information is correkt).
During debugging the error occurs in the function GETPROPERTY (Webutil).
the error occurs only sometimes.
Can anybody help me to solve the problem ?
best regards,
Alexandra Schermann

Hi Alexandra,
You can catch the exception in Exceptions part and close the file. Something like,
DECLARE
F_VersandZahlen CLIENT_TEXT_IO.FILE_TYPE;
BEGIN
F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w');
<do your processing>
EXCEPTION
WHEN OTHERS THEN
CLIENT_TEXT_IO.FCLOSE(F_VersandZahlen);
END;-Arun

Opening a file with FILE_SHARE_DELETE mode (Only on Windows)

Hi,
We have an application that imports logs from several 3rd party vendor's applications. Basically what we do is import the logs in real time, i.e we do have a live FileInputstream connection to the log file. Now, when the 3rd party applications that rotate these logs (many of them do when they grow big or scheduled periodically), all unix flavors dont see to have any problem, while the windows does complain that the device or resource is busy and the original application is not allowed to rotate it. When i dug into the native code of windows jvm, i found that the file is not opened in the FILE_SHARE_DELETE mode and only with FILE_SHARE_READ and FILE_SHARE_WRITE modes. When we wrote a separate C++ application the opens a file with FILE_SHARE_DELETE mode, we found that the logs are rotatable.
Now, how can we instruct the JVM to open a file with FILE_SHARE_DELETE mode? Is there any such implementation already or do i have to come up with another class extending the FileInputStream and use a totally different open method where the file is opened with this mode in the native code?
Thanks
Manava

Hello,
I think you can write :
Runtime.getRuntime().exec("start.exe " + MyFileDialog.getDirectory() + MyFileDialog.getFile());
So, "start.exe" choose the application (not valid for NT machine), ".getDirectory()" return the PATH and ".getFile()" return the NAME.
Best regards from France
Thierry

FRM-18108 Error when opening a form with subclassed objects

Dear Group,
I have 2 forms in Oracle Forms 6i. One of the forms contains an object group. The other form contains the object that I subclassed it to.
When I open the form that contains the subclassed object group, I get the FRM-18108 error.
If I open the form with the original object group, then open the subclassed form, there is no error.
Does this mean I must always open the original form in order to work on the one with the subclassed object group?
I hope there is an simple solution to what is something I am missing in my Oracle Forms setup.
Thank you in advance.
Emad

Hi Duncan.
Your suggestion worked.
Thank you for the fast response!
Truly,
Emad

Opening a folder with an application in one click, and automating Terminal

A forum member kindly recommended I move a question from 'Mac OS X Leopard' to this sub-forum as it was more appropriate to Unix:
Firstly, is it possible to create a desktop/dock icon (or perhaps a Safari or FireFox bookmark) that opens a folder with a certain application? I'm doing a lot of web development and hoping to create handy buttons for opening up entire folders (Ruby on Rails projects) with only one click. At the moment, I have to find the folder and drag it to the textmate icon; if I had a 'open in textmate' button, that would make my work so much quicker, as I'm often changing between projects. It would be even better if I could have the button as a bookmark in my browser (where I spend most of my time).
Secondly (probably related to the first question), is it possible to automate a process I follow every time I open up a Ruby on Rails project in Terminal (?);
1. Load Terminal by clicking on the icon in the dock
2. 'cd sites/rubyonrailsapp' (where 'rubyonrailsapp' is the rails application I want to load)
3. 'mate .' (opens the entire /rubyonrails/ folder in TextMate)
4. 'CMD + T' (to open up a new Terminal tab)
5. 'gitk --all &' (to open up the Wish version control interface for the rails application)
6. 'autotest' (to runs the tests in the rails application)
7. 'CMD + T' (to open up another new Terminal tab, ready for me to use)
If I could follow those steps with only one click, that would be amazing, so any suggestions are much appreciated (I just realised how many times-per-day I'm typing these commands).
Cheers

you can try this applescript. just copy it into the Script Editor and save it (1) as a script application that you can double-click, or (2) as a script that you can run from the script menu or quickkeys or etc. may need some tweaking...
<pre class="jive-pre">tell application "Terminal"
set cmd to "cd sites/rubyonrailsapp; mate ."
do script cmd
activate
end tell
tell application "System Events"
keystroke "t" using command down
end tell
tell application "Terminal"
set cmd to "gitk --all & autotest;"
do script cmd
activate
end tell
tell application "System Events"
keystroke "t" using command down
end tell</pre>
to solve your other question, you'll probably need to script textmate. something like:
<pre class="jive-pre">tell application "TextMate"
open alias "path:to:folder"
end tell</pre>
I don't have textmate to test it on, however.
sorry it's not a unix solution, but the task you're trying to accomplish fits better with applescript.
Message was edited by: twtwtw - sorry, wrong quote style...

Error when opening the database with resetlogs

ORA-00603: ORACLE SERVER SESSION TERMINATED BY FATAL ERROR
WHEN I open the database with RESETLOGS

Well you definitely need to post more information here.
Looking at what you have posted, all that I can reply is
ORA-00603: ORACLE server session terminated by fatal error
Cause: An ORACLE server session is in an unrecoverable state.
Action: Login to ORACLE again so a new server session will be created

I need to open a file with an associated programm.

I need to open a file with an associated programm.
I'm looking for two solutions:
1. for Linux/Solaris/Unix/...
2. for Windows 95/98/Nt/2000
For Windows I have done this with command line
Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + uSavePath);
but it doesn't work on windows2000. We need an universal solution.
For linux
Process p = Runtime.getRuntime().exec("netscape openURL " + uSavePath);
But may be anybody know better solution?

You are right. For unix better solution is that my program to care about all association itself. As I undestend now it's a common solution for unix applications.
But for windows it will be ugly enough. I've found another way for windows
Win2000/NT: "cmd /C start filename /B"
other Wins: start filename
for linux I've stopped at doing this via Netscape.
May be in future I'll make my property file.
start filename - on Win95(may be 98/ME) returns -1 if file not assotiated with a programm, and doesn't shows openWith dialog. It solved using something like "rundll32 shell32, OpenWith filename"
It's all for those how will solve this problem in future.

Oracle 8.1.7 in Caldera Open Unix 8 with lkp

Similar Messages

Maybe you are looking for