Oracle 8.1.7 Installation (tru64 Unix)

Hello all,
I am having some problems installing Oracle on tru64 V5.1b. I have set up all the files with the right permissions and all, and i have edited the login file, but for some reason, whenever I try to install, it keeps giving me the error Ünable to setup inventory. You may not have proper permissions." Any ideas?
Thanks

check out the available disk space for temp, oracle installer need 500MB of available disk space for temp, or delete OraInstaller directory on /temp

Similar Messages

Install Oracle 8.1.7 on Tru64 UNIX 4.0F

hello:
I have installed oracle8.1.7 on Tru64 UNIX 4.0F.
After startup database and start listener,at first only one listener service could be found using command lsnrctl status looks like:
Service "ORA8" has 1 instance(s).
The command completed successfully
,but after while (2-3min) use the same command can find another result, looks like:
Service "ORA8" has 1 instance(s).
Service "ORA8" has 3 instance(s).
The command completed successfully
Then client can not connect to database.
I can not find the reason.
Can you?
Thanks a lot!

make sure the required characeter set (called subset in TRU64 UNIX) is loaded in OS ...
you can check with command 'setld -l <>'
i dont have a UNIX box with me now ... so i can't tell you exactly what it is ..
take help of any OS (TRU64 UNIX) expert !
good luck

Problem with Oracle 8.1.7 Installation on UNIX AIX 4.3

Hi,
I tried to install Oracle Enterprise Edition on UNIX AIX system. After all pre installation task, when I run the installer (./runInstaller) I have the following error message:
java.lang.InternalError: Can't connect to X11 window server using '192.168.0.150
:0.0' as the value of the DISPLAY variable.
Please help me to fix my problem
Thanks
Omer

Is the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle

Install Oracle 8.1.7 (TRU64 UNIX 5.1)

Need information on how to initate the istallation of Oracle
Software on TRU64 UNIX 5.1. Prior to 8.1.7, the "orainst" shell
for UNIX was used from the command line. The installation
instructions for 8.1.7 require the setting of the variable
DISPLAY, and the execution of the script "runInstaller". For
what I can tell, the new installation routine requires X-windows
to run, but I cannot figure out how to set it up.
Thank you in advance for any help on this subject.
Eduardo Bedoya

Dirk:
I had the same problem, which is caused by a
wrong version of Java. Follow the instructions
in Denis Claric's Oracle page:
http://staff.in2.hr/denis/oracle/
BUT do NOT install the RPM packages from the
RH7.1 CD-ROMs, get them from RedHat's web site instead.
-Ramon

Does Oracle 8.1.5 Run On Tru64 Unix 5.1

Does Oracle 8.1.7 Run On Tru64 Unix 5.1
We plan to upgrade the OS and Oracle in two steps.
1. First weekend - upgrade the operating system from Tru64 4.0d to Tru64 5.1.
2. Second weekend - upgrade Oracle from 8.1.5 to 8.1.7
Questions:
1. Will Oracle 8.1.5 run successfully on Tru64 5.1 during the one-week transition period?
2. Does it make any difference if we upgrade the OS to Tru64 5.1a instead of 5.1?
Thanks in advance,
Alan Holsted
Metro, Portland, OR.
null

A question along the same lines, does Oracle 7.3.4 run On Tru64 Unix 5.1?
We plan to upgrade the OS and Oracle in two steps.
1. Firstly - upgrade the operating system from Tru64 4.0F to Tru64 5.1 (via 5.0A).
2. Secondly - upgrade Oracle from 7.3.4 to 8.1.7 or perhaps 9.x
Questions:
1. Will Oracle 7.3.4 run successfully on Tru64 5.1 during the transition period?
2. Does it make any difference if we upgrade the OS to Tru64 5.1A instead of 5.1?
TIA
Chris

Oracle Performance problem in Tru64 Unix

Hello All,
I am having performance problem in Tru6u Unix. Details are mentioned below :
OS: Tru64 Unix
Oracle Version : 8.1.7.4.0
Forms : 6.0
Mode: Oracle Parallel Server
When, developers are trying to save some data using forms, it's taking too much time.
Any hint/idea, how to start tracking the things, will be highly appreciated.
Regards,
Rajeev Tomar

Check what are the session waits from v$session_wait and try to tune them.
If possible, get the code and tune the sqls.
Without knowing the application behaviour and other related stuff, no one can simple adice on performance problems.
Jaffar

When can we download the Oracle 10g for HP Tru64 Unix?

Hi,
Could you tell me the time to release the HP Tru64 Unix version?
Thanks

Check this: http://otn.oracle.com/software/products/database/oracle10g/index.html
Joel Pérez

About install oracle 8i on Tru64 Unix

I install 8i on Tru64 Unix according install guide,all requests but patch of OS kit2
is satisfied,when I run ./runIstaller,OS tips "./runIstaller line XX '(' unexpected",
etc.I want to know why and how to handle. thanks.My e_mail [email protected]

You need at least one X server.
You can install the database to a server which has no X environment on an X terminal.

Sdo_cs.transform on Compaq tru64 UNIX

We have managed to get sdo_cs.transform function working on NT after applying the latest patches. We now need to have it work on Compaq Tru64 Ver 4.0F where we have just installed Oracle 8.1.6.3.0 with all the latest patches.
We get the error:
"ORA-03113: end-of-file on communication channel"
whenever we try the sdo_cs.transform function.
The following code works on our NT installation but fails on the UNIX installation:
SQL> SELECT * FROM AMG56_AGD66;
PLACE_NAME
POSITION(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
AMG56_AGD66
SDO_GEOMETRY(2001, 81938, SDO_POINT_TYPE(498910, 6966131, NULL), NULL, NULL)
SQL> SELECT c.place_name "Name",
2 c.position.sdo_srid,
3 c.position.sdo_point.x "Easting 1",
4 c.position.sdo_point.y "Northing 1",
5 c.position,
6 sdo_cs.transform(c.position,m.diminfo,82413)
7 FROM AMG56_AGD66 c, user_sdo_geom_metadata m
8 WHERE m.table_name = 'AMG56_AGD66'
9 AND m.column_name = 'POSITION';
SELECT c.place_name "Name",
ERROR at line 1:
ORA-03113: end-of-file on communication channel
SQL> SELECT * FROM AMG56_AGD66;
SELECT * FROM AMG56_AGD66
ERROR at line 1:
ORA-03114: not connected to ORACLE
SQL>
Any ideas???
Regards
Peter Cohen
null

Hi Peter,
I believe that functionality was broken in the field test version of coordinate systems that shipped in 8.1.6 only for transforming data stored in the SDO_POINT type. I'm not sure, but I doubt this will be patched on tru64 unix.
If you need to get this working you might want to try storing your point data using the elem_info_array and the ordinate array rather than the optimized point type.
This problem is fixed in 8.1.7.
Hope this helps,
dan

Oracle 10g Companion CD installation

I have installed Oracle 10g database rel 10.1.0 on Digital TRU64 Unix. I want to know whether the database should be opened or closed for installing Oracle10g Companion CD. I am intending to install only JVM related stuff.

Listed below is brief installation of oracle JVM
spool full_jvminst.log;
set echo on
connect / as sysdba
startup mount
alter system set "_system_trig_enabled" = false scope=memory;
alter database open;
select obj#, name from obj$
where type#=28 or type#=29 or type#=30 or namespace=32;
@?/javavm/install/initjvm.sql
select count(*), object_type from all_objects
where object_type like '%JAVA%' group by object_type;
@?/xdk/admin/initxml.sql
select count(*), object_type from all_objects
where object_type like '%JAVA%' group by object_type;
@?/xdk/admin/xmlja.sql
select count(*), object_type from all_objects
where object_type like '%JAVA%' group by object_type;
@?/rdbms/admin/catjava.sql
select count(*), object_type from all_objects
where object_type like '%JAVA%' group by object_type;
@?/rdbms/admin/catexf.sql
select count(*), object_type from all_objects
where object_type like '%JAVA%' group by object_type;
shutdown immediate
set echo off
spool off
The db needs to be up when you are running the above scripts but need to get recycled after installation.
Also JVM can be installed during creation of DBCA.When it comes to the point where it says standard DBA features u can select additional features

Oracle 8.1.7 installation on HP-UX 11

When I install Oracle 8.1.7 on HP-Unix 11, I received "ORA-12547:TNS lose contact" error
at the step of Oracle Dtatbase Configuration Assistant in the section of Configuration Tools Windows. After ignoring this message, the installation still give a successful message. However, it seems that the OS doesn't know the listerner process, even when I use lsnrctl command to start the listener service. I still cannot connect to the database. How to solve this problem? Thanks!

you may need to check the sysliblist file in the rdbms/lib directory. I ran into a similar issue where the sysliblist file did not have the correct settings listed. consequently oracle was not starting in the correct order, I received the same message when trying to start my database.
in adidtion, you may want to check the installation logs for any errors.
hope this helps.

OAS 4.0.8.1 on Compaq Tru64 UNIX 4.0F (Digital Unix 4.0F) : Help !!!

My installation of OAS 4.0.8.1 on Digital Unix
4.0F is failing when it comes to try to
relink something called ntcontab.o
, an apparently missing header file :
cc: Severe: /usr/include/sys/types.h, line 77:
Cannot find file <standards.h> specified in #include directive.
(I did find the header file on the system but in a different place.
I tried a link to make it
appear where it should but that didn't work for
some reason)
My release notes specify 4.0D is required,
maybe thats the problem, though I wouldn't
expect a whole header file to be moved between
minor releases.
Any help very gratefully recieved. I am really
stuck.
Thanks
Alan McCulloch
email : [email protected]
BTW - I'm new to Digital Unix, previously
worked on Solaris. My subjective impression is Digital
Unix is alot less well supported and prevalent
than Solaris, and my feeling is we would
be more secure on Solaris.
Is this at all a valid point of view ? I'd
be very happy to be wrong about this !
null

Hi Peter,
I believe that functionality was broken in the field test version of coordinate systems that shipped in 8.1.6 only for transforming data stored in the SDO_POINT type. I'm not sure, but I doubt this will be patched on tru64 unix.
If you need to get this working you might want to try storing your point data using the elem_info_array and the ordinate array rather than the optimized point type.
This problem is fixed in 8.1.7.
Hope this helps,
dan

XML C++ Parser on Tru64 UNIX

Are there any plans to provide a version of the XML C++ Parser on Compaq Tru64 UNIX?
Thanks and regards
...colin

We do not currently support Compaq Tru64 UNIX. We have not yet made any announcement regarding this platform.
Oracle XML Team

Essbase system 9 -difference between the installation in UNIX and windows

Hi,
plz let me know the difference in installation in UNIX and windows, let me know the process. this is bit ugent...
advanced thanks for your help and support.
Thanks,
sudhakar

Hi Sudhakar,
You have 2 documents for windows_installation and unix_installatio in the following location.
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

Reports Developer 6i availability for Tru64 Unix?

Is Reports 6i Release 2 actually available for Tru64 Unix? I can't seem to find any information to indicate that it is -- or is it only available through the Application Server package?
thanks,
Allan Tin

hello,
please take a look at metalink.oracle.com where you can find the latest porting information for our products.
regards,
the oracle reports team

Oracle 8.1.7 Installation (tru64 Unix)

Similar Messages

Maybe you are looking for