Oracle 8.1.7 on RH7.0 Installed fine now wont run at all!
I was able to install Oracle 8.1.7 on RH 7.0 using this fix... http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/README.Oracle8i
The database initialized correctly and I was able to setup and connect to the database. I even ran a port scanner and checked memmory...the thing was running! Then after the reboot the database wont run at all. When I type ./oracle it trys to load and then shows "Segmentation fault (core dumped)". When I try ./oracle start nothing is echoed. I tried to copy the lib files
ld-linux.so.2
libc-2.1.3.so
libdl.so
libpthread.so
to the $ORACLE_HOME/lib/ dir and followed John Smiley's howto but the relink script doesn't work! Even still I think something else is wrong other than the library. Can someone help?
Nevermind figured it out:) Like duh, I should read the damn Installation file:?
Similar Messages
-
Windows 7 installed fine, now my mac side does not work!! PLEASE HELP
Hello, i have installed windows 7 fine today on my Macbook pro, and it works perfect. Now when i want to use the mac side of the Laptop, is comes up with the apple in the center as usual, then the screen turns grey with writing (somthing about stuff i dont understand) behind that with the back box ontop which says turn power off and retry or restart. Please help as i need my mac side of the lapatop Thanks
scottwright76 wrote:
Hello, i have installed windows 7 fine today on my Macbook pro, and it works perfect. Now when i want to use the mac side of the Laptop, is comes up with the apple in the center as usual, then the screen turns grey with writing (somthing about stuff i dont understand) behind that with the back box ontop which says turn power off and retry or restart. Please help as i need my mac side of the lapatop >Thanks
Yes, as mentioned above you are having [kernel panics|http://support.apple.com/kb/HT1392?viewlocale=en_US]. Use [this link to troubleshoot your problem|http://www.thexlab.com/faqs/kernelpanics.html]. -
The VMM agent was installed on two Hyper-V host servers just fine (they were then removed temporarily from SCVMM), but trying to add the servers back into SCVMM it insisted the versions of the agents on the two hosts were unsupported (even though it
installed them) so it requested they were removed before retrying, after removing the agents it now refuses to install them and suggests installing them locally. Installing them on the local host manually just causes the installation to end prematurely.
The firewall is completely disabled
UAC is turned off
I have also tried running from elevated cmd using msiexec /I
Any ideas??Hi,
Please refer below as it has some useful troubleshooting steps that might help you.
http://support.microsoft.com/kb/2742275
As you have tried from an elevated cmd, have you tried restarting Add Host job in VMM as the last step?
http://networkerslog.blogspot.com/2013/07/unable-to-add-hyper-v-host-due-to.html
You can use PowerShell to reassociate the Host.
http://blogs.technet.com/b/jonjor/archive/2013/02/15/managing-hyper-v-hosts-using-virtual-machine-manager-fails-with-error-0x8033803b.aspx
Let me know of any development.
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.) -
SAPGUI for Java - Installs Fine, But Wont Run
Error when starting: Could not find main class. Program will exit.
This is displayed in a box entitled "Java Virtual Machine Launcher".
1) Windows XP
2) Java JRE 1.6 Patch 12 (the latest)
3) Path vars are set just like other PCs on which the Java Gui is working fine
4) Installation log claims to be successful
5) The error above displays when starting the GUI. Cannot get far enough to turn tracing on.
6) Works on 6 our of 7 Pcs that we have tested. If this PC is different than the rest, we are not able to easily determine what the difference is.
Ideas for troubleshooting would be welcomed.
Cannot find any notes/forum hits that seem to apply.
Thank you.Hello John,
the error message you see is what typically happens when the JRE is too old to load the classes of the jars provided in the classpath.
Although your are writing you have Java JRE 1.6 Patch 12, please double check if this is the case on the particular PC and it is run from cmd when typing "java -version".
Best regards
Rolf-Martin -
[Solved] No grub installed. Now laptop running a little too hot.
I had fedora and crunchbang already running on my laptop so I had't installed grub. Now my laptop is running little hot even after installing Laptop Mode Tools
and there is no grub in /etc or /etc/default where I can change any values. If I install now and update after changes, will it affect my existing crunchbang grub?
Last edited by celebrimbor (2014-10-12 07:10:09)derhamster At first I'd thought MatLab is the culprit. But then even with only leafpad running, the laptop was too hot.
And my
lspci
is
http://pastebin.archlinux.fr/449158
tomk : In #! forums I'd found that changing the GRUB line to
GRUB_CMDLINE_LINUX_DEFAULT="quiet i915.lvds_downclock=1 i915.i915_enable_fbc=1 i915.i915_enable_rc6=1"
made things a lot quieter. Hence I had asked.
DSpider and cfr You confuse me! I have intel graphics only. Don't have a dedicated graphics card. -
I have installed Elements 12 on my laptop, (upgrading from Elements4) but now Lightroom wont run at all. my question is, do I need to upgrade Lightroom as well, I am running Version 3.2?
Regards
Snapper1Moving this discussion to the Photoshop Lightroom forum.
-
My ipod 4th gen screen kept jumping this morning. Had to do a restore to factory conditions and it is working fine now. However, it originally had a factory installed Nike+ app on it and it did not install with the restore. I use this app daily with the running chip to log my workouts. Anyone know how to get this app back from Apple? Loading the Nike app from the app store is not the same thing as you need gps running continually for it to work (as with an iphone). Can't have that with my ipod unless I'm connected to wifi. Help?? Thanks.
If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
Have you tired using the Spotlight search? Maybe you just can't find it.
Next would be to restore a gain. First from backup then next to factory settings/new iPod.
The Nike app you can download/install
Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod -
CS3 InDesign & Illustrator Install Exit Code 7; Other CS3 Apps Install Fine
I feel like I'm beating a dead horse... (no offence to horse lovers out there - it's just an expression)
I'm having trouble performing an silent install of the CS3 suite from a network share on Windows 7. I've read through a number of posts on here, one of which was a 3 page post on this issue where Mac & Win 7 users alike posted failures, successes and how they got there, and another about removing the OS check feature from the application.proxy.xml file (which didn't work for me; unless I did something wrong...?) Unfortunately for me after trying much of what was suggested, I'm still facing a brick wall.
All these machines are Core 2 Duo's clocked at no less than 2.2GHz, have 4GB of RAM, have over 100GB of free disk space and are running fully updated/patched installations of Windows 7 32-bit (x86) with Office 2007 Enterprise.
When I try to install the suite silently it fails with 'Exit Code: 7', which according to the CS3_Deployment.pdf means "Unable to complete the silent workflow." If I take out the "--mode=silent" switch, the GUI launches and installs fine. I took a look at the compressed log file & searched for "Return value 3", "ERROR" and "FATAL" for clues, but its vague and nondescript. I didn't copy/paste the entire log in this post for brevity's sake, but you can check it out here:
Condensed Version: http://pastebin.com/eFKpe9wK
Unabridged Version: http://pastebin.com/MQDeQZmF
Instead, however, I do want to touch on just a few things from the log:
[ 9660] Thu Dec 02 07:08:13 2010 INFO
BEGIN Setting requested payload actions
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {AC76BA86-1033-0000-7760-000000000003} Adobe Acrobat 8 Professional (At install, older versions get upgraded) per deployment file.
Setting action for {7BB7F66A-D798-45A3-A383-0727FB1EBF8E} Adobe Flash Video Encoder per deployment file.
Setting action for {abd781e6-d5ca-45aa-a5f7-f64799eb1c04} Adobe Version Cue CS3 Server per deployment file.
Setting action for {00E5C764-9525-44C3-8404-712AD06AE12A} Adobe Dreamweaver CS3 per deployment file.
Setting action for {3BC8460B-085E-47F3-9C62-8FFCBAF11D78} Adobe Flash CS3 per deployment file.
Setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 per deployment file.
[ 9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3 is forbidden by the policy.
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {C4519961-AC64-4565-B3AF-9050296B5D5A} Adobe Illustrator CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Illustrator CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 per deployment file.
[ 9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3 is forbidden by the policy.
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {24D77A7C-E10B-4057-9974-FAB8BFDAC853} Adobe InDesign CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe InDesign CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 per deployment file.
[ 9660] Thu Dec 02 07:08:13 2010 INFO
Selection of payload {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3 is forbidden by the policy.
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Error setting action for {30C4B843-28DA-466F-AFCA-CB0ED153C826} Adobe Photoshop CS3:
Localization: missing stringID "locPayloadSelectSystemRequirement" for en_US in C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804\resources\main.xml
system check
The minimum system requirements listed below are needed in order to run Adobe Photoshop CS3 and are not met.
- Windows XP Service Pack 2 and greater
- Windows Vista
[ 9660] Thu Dec 02 07:08:13 2010 DEBUG
Setting action for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium per deployment file.
PayloadPolicyNode.SetAction: IY->IY for {7005ECBC-F54B-42FD-81E4-934BC43FA329} Adobe Creative Suite 3 Design Premium
[ 9660] Thu Dec 02 07:08:13 2010 INFO
END Setting requested payload actions
[ 9660] Thu Dec 02 07:08:13 2010 WARN
Some payload actions specified in the deployment file could not be applied.
...snip - snip...
[ 9660] Thu Dec 02 07:08:17 2010 INFO
Checking bootstrapper progress
Ran uninstall for the bootstrapper due to an exception
[ 9660] Thu Dec 02 07:08:17 2010 FATAL
Exception: Payload actions could not be set. Search the log for "BEGIN Setting requested payload actions" for details.
Exit code: 7
[ 9660] Thu Dec 02 07:08:17 2010 INFO
I've got some initial questions that pertain to what's in the log file:
The areas in bold: Since the same install also fails on Windows XP machines, what does this mean exactly?
The areas in italics: Can anyone expand on what that means?
The underlined areas: What 'Policy' is this referring to: Setup's own internal policy (like the OS check) or something else?
Here's what I've done so far:
Went through the 'Run a silent installation of Adobe Creative Suite 3' document
Went through the 'Troubleshoot installation with install logs | CS3, CS4' document
Used the Adobe Support Advisor to go through the logs, but it always says that no problems are found.
Recreated the install & uninstall XML files, twice, via the "setup.exe --record=1" method for each application & the entire suiteNot that I think this is important, but I was never prompted to enter a serial number when creating the .XML files.
Renamed the XML files for each application (e.g.: Photoshop-install.xml; CS3Suite-install.xml; Flash-remove.xml etc.)
Copied the XML files to a common folder on a network share (e.g.: \\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs)
Created install batch files for each application, including the suite, that install via the following command"\\path\to\Adobe\Design Premium CS3\Adobe CS3\Setup.exe" --mode=silent --deploymentFile="\\path\to\Adobe\Design Premium CS3\Adobe CS3\XMLs\Photoship-install.xml"
Tried the installs with & without the "--skipProcessCheck=1" switch but there's no change.
No applications are running during the installs.
Verified my application.xml.override file was in \\path\to\Adobe\Design Premium CS3\Adobe CS3\payloads\AdobeDesignSuitePremiumen_US_Volume
Verified I didn't have any strange characters in my application.xml.override fileI deleted and manually retyped all double quotes just to be sure.
I noticed that the "installSourcePath" property in the install.xml files created point to a local location rather than, what I would expect to be, the installation source folder where I copied the contents of the DVD to. On a whim I changed it to point to the copied DVD files but that didn't seem to help either so I changed it back.
FROM: <Property name="installSourcePath">C:\Program Files\Common Files\Adobe\Installers\498b43b77cac072081a5692bfc52804</Property>
TO: <Property name="installSourcePath">\\path\to\Adobe\Design Premium CS3\Adobe CS3</Property>
Aside from Acrobat Reader 9.4.0, Adobe Flash Player 10 (ActiveX & Plugin) and maybe Shockwave 11, these machines never previously had any other Adobe products installed.
For what its worth, uninstalling Acrobat Reader 9.4.0 doesn't seem to help either. I didn't try removing Flash Player or Shockwave [yet].
Using the install XML files I created via "setup.exe --record=1", when I run installs for the individual applications silently [via batch files] one at a time, all applications install fine except for Illustrator and InDesign: Exit Code 7.
This may further help suggest my application.xml.override file is fine.
Even more interesting is that I get the same error on Windows XP and Windows 7 machines alike. (See the image below taken from an XP machine; the same happens on Windows 7 machines so it doesn't appear this problem is OS specific.)
Other than removing Flash Player, Shockwave and ripping out our Anti-Virus solution (Sophos), which is going to be difficult, is there anything I've missed?
Anyone have suggestions on why Illustrator and InDesign don't install?I spoke with Adobe Support today and was directed to this support article:
CPSID_84332 - http://kb2.adobe.com/cps/843/cpsid_84332.html
Although this article speaks to CS5 installations, even though I thought I made it clear that I was working with CS3, I decided to give it a shot anyway.
The first comment passively suggests troubleshooting [all] "install errors using Creative Suite 5 install logs", which links you to CPSID_84451 - http://kb2.adobe.com/cps/844/cpsid_84451.html. But again, its CS3 I'm having trouble with and I've already linked, what I believe to be, a more appropriate CS3 [and CS4] log troubleshooting document in my first post.
Step 1 requires restarting "your computer in a minimized state before running the installer." - This isn't at all optional nor ideal when we're talking about silent installations, especially when they can take place in the middle of the day - its highly distruptive, or deployments in general. Plus, I'm not interested in developing a package that will perform the steps outlined and then undo everything. Its important to note that this isn't a one-off problem: every machine that needs to have CS3 installed experiences this problem. But for what its worth:
I did as instructed in the troubleshooting documentation but it didn't work.
No other applications fail to install, and all but these lone Adobe CS3 apps install fine; what gives?
Step 2 is to perform a repair installation of the Windows Installer. (FYI: Windows 7 ships with 5.0, my version is 5.0.7600.16385, and for the record there doesn't seem to be a redistributable download available at this time.) I can't use this as part of my silent installation package because it calls you to run `sfc /scannow` which is time consuming and, if something is found, often requires a reboot. Fortunately for me, "Windows Resource Protection did not find any integrity violations."
Step 3 is to preinstall Adobe Air and the AdobeHelp payloads:
AIR isn't part of the CS3 DVD, it has to be downloaded & installed silently (via -silent -eulaAccepted if you don't have the redistributable package); this was done but didn't help.
There isn't an 'AdobeHelp' payload, only 'AdobeHelpViewerAll', which will not allow a manual instalation so I can't do that.
In summary, these tips unfortunately did not solve the problem. -
I have just bought a new computer and downloaded the latest version of itunes. It has all installed fine, but when I plug my ipod and sync it, the music library shows all the songs and videos that are on there, but won't let me play them. Also, I can't add any new songs to the same library. It saves them elsewhere. I have had the previous version on another computer and it worked just fine. I have been online trying to find an answer but nothing. Hope someone can help me. Thanks
Installing iTunes does not cause content to magically appear on the computer.
Your media is only where you put it.
iOS devices are not backup devices.
Copy the media from the old computer to the new computer. -
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.
Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!
-
Oracle 9I Database, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm -
Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Microsoft silverlight and Adobe Acrobat 9 pro extended, installed Fine, but not working.
I have Adobe acrobat pro extended plug in and microsoft silverlight plug in installed fine on my firefox , however it seems doesn't work . How to check them ? I knew doesn't work , because when i am using IE , i can click right mouse button, then options to "convert to pdf document" appeared. While when i used firefox it doesn't , how to check
you can get an acrobat 9 pro trial version here, if you follow all 7 steps: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
i'm not sure if your license for the extended version will work with the non-extended version but, give it a try. -
Oracle XE service does not get installed
Hi,
2 days ago downloaded Oracle 10 g Express Edition and installed on my computer. It installed succesfully and gave no erros. But when I tried to go to the homepage it failed to open. Then I check the services.msc and found that OracleXEService was not there. Then I uninstalled it and installed 11g XE Release2. But again the same problem. What's wrong with this? Does the OracleXE setup install both client and server side?Well, there must be something going wrong on your system, and there should be some clue either in the installation process itself, or in the log files.
On my system, there are five logs in the directory named above:
cloneDBCreation.log
CloneRmanRestore.log
postDBCreation.log
postScripts.log
XE.bat.log
Do you have any of these? If not, you could try a silent installation as documented in the [url http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#BABBCGHA]Installation Guide. That way you'll definetly get a log file for the installation. There is also a silent mode for a repair installation. Perhaps you could try that as well.
-Udo
Maybe you are looking for
-
How can I get my neighbor list to show in CafeWorld on FaceBook so I can send requests and gifts?
When receiving gifts one is given the opportunity to return a gift to neighbor players. I am unable to do this. When catering on this game I cannot ask other players to join my crew because I get a blank list instead of one with their names on it. Th
-
Value nodes with depth in Context - programmatically binding.
I am resonably new to Java Webdynpro and have been unable to solve this issue so far if someone has a link to a implementation (pseudo code) it would be greatly appreciated. I have a context supplied from an interface that is not flat. With data in t
-
Final cut pro event and project missing
Everytime when I quit FCPX, I found nothing when I open the software next time to edit my video. I have got nothing after spend 10 hours on my editing, whats going on??????????? The event folder and project folder were still there, but I just can't r
-
Can't Connect to my WiFi after ios 6 update
My iPhone 4 recognizes my wireless network, but it doesn't automatically connect to it anymore. Everytime I try to have it connect a screen pops up that says "Log In" at the top but is a link to the apple.com website that says "Page Not Found". Anyon
-
How do I transfer my music from my old PC to my new laptop using my iPhone?
I recently purchased a new laptop and would like to transfer all my songs from my PC to this laptop. however i heard that you could do this using the iPhone which all the music is on. my itunes on my laptop registers all the songs, it just wont let m